aepko/Ardupilot2
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
17,410 Commits 72 Branches 509 Tags 683 MiB
9e5d13c1de
Commit Graph

8298 Commits

Author SHA1 Message Date
Jean-Baptiste Dubois
9e5d13c1de RCOutput_Bebop: use CLOCK_MONOTONIC instead of CLOCK_REALTIME 
CLOCK_MONOTONIC is not affected by discontinuous jumps in the system time.
 2015-07-15 12:08:44 +02:00
Robert Lefebvre
14882bc6a8 AC_AttitudeControl: Remove unused takeoff jump #define 2015-07-14 20:16:58 +09:00
Robert Lefebvre
e1902e2289 AP_MotorsHeli: Remove unused _dt variable. 2015-07-14 20:13:43 +09:00
Randy Mackay
7d2fe3cc2b AP_GPS_UBlox: remove unused member 2015-07-14 15:02:15 +09:00
Randy Mackay
2c33250bee AP_GPS_UBlox: send_next_rate_update always runs all steps 
Moving the if, endif checks within the case statement ensures the state
machine goes through all 10 states
 2015-07-14 15:02:13 +09:00
Randy Mackay
4b015d2091 AP_GPS: remove compiler warnings 2015-07-14 15:02:10 +09:00
Randy Mackay
df3a04e284 AP_GPS: reduce fake Ublox hdop to 130 2015-07-14 15:02:08 +09:00
Andy Piper
5ccc58ffb4 AP_GPS: Read actual hDOP value from UBLOX messages 
Before we were reading the position DOP and calling it hDOP. Since the
other drivers actualy read hDOP it seem best to do the same.
Fixes issue 462.
 2015-07-14 15:02:03 +09:00
Paul Riseborough
610595bfb9 AP_NavEKF: Prevent position drift between arming and takeoff when using OF 2015-07-13 10:54:36 +09:00
Randy Mackay
2b4aaf2368 SITL: add vibe monitor and SIM_ACC2_RND to sitl 2015-07-12 16:50:30 +09:00
Paul Riseborough
8b4b0b9576 AP_NavEKF: Add accelerometer clip monitoring and isolation 
Isolates an accelerometer that is clipping  and attempts to use the one that is clipping less.
 2015-07-12 16:49:19 +09:00
Staroselskii Georgii
72820303d4 AP_HAL_Linux: set higher SPI speed for Navio 
We can set a higher speed on newer Linux kernels since
52469b2a38.
The older ones will just floor the value.
 2015-07-10 18:59:18 +10:00
Peter Barker
0028910428 AP_InertialNav: take reference to variable we are trying to update 
There are no callers to this function.  Perhaps it should be removed?
 2015-07-10 18:56:20 +10:00
Andrew Tridgell
4e0c2c5a9b AP_HAL: defined default log and terrain directories for bebop 
the /var filesystem is wiped on boot on Bebop. Use these as a
temporary workaround
 2015-07-10 16:46:31 +10:00
Andrew Tridgell
6df33dd3f4 AP_InertialSensor: fixed MPU6000_SPI bus initialisation 
we need _spi for get_semaphore()
 2015-07-10 16:46:30 +10:00
Julien BERAUD
954ec71630 HAL_Linux: added rcout implementation for bebop 2015-07-10 16:46:30 +10:00
Julien BERAUD
51c3c499e2 AP_Compass: support AK8963 on I2C 2015-07-10 16:46:30 +10:00
Julien BERAUD
0b41da0dea AP_Compass: rework to make the bus generic for AK8963 
Supporting only MPU9250, prepare to implement another bus, i.e i2c on the
bebop
 2015-07-10 16:46:29 +10:00
Julien BERAUD
0cd584c293 AP_Compass: fix rotation for bebop AK8963 
Set the correct rotation for bebop
 2015-07-10 16:46:29 +10:00
Julien BERAUD
7dd0b5fae6 AP_Compass: removed _spi_sem and _spi 2015-07-10 16:46:29 +10:00
Julien BERAUD
d407737434 AP_Baro: added MS5607 support 2015-07-10 16:46:29 +10:00
Julien BERAUD
3cf952d1f8 AP_InertialSensor: add fifo support for MPU6000 
And remove the use of data rdy in this case
 2015-07-10 14:24:09 +10:00
Julien BERAUD
8a76ff53bd AP_InertialSensor: add i2c bus driver for MPU6050 2015-07-10 14:24:09 +10:00
Julien BERAUD
1679728730 AP_InertialSensor: Configure SPI as a generic bus for MPU6000 
Add the possibility to implement an i2c bus communication for the
MPU6050 on parrot bebop
 2015-07-10 14:24:09 +10:00
Julien BERAUD
f0bed711cf AP_HAL: added AK8963 I2C defines 2015-07-10 14:23:18 +10:00
Julien BERAUD
e0b59942b0 AP_HAL: changed log directories for bebop 2015-07-10 14:23:18 +10:00
Julien BERAUD
5c414b4ca2 AP_HAL: Fix Compass I2C address for Bebop 2015-07-10 14:23:18 +10:00
Julien BERAUD
8d6123928f AP_HAL: Add i2c bus numbers and addresses 2015-07-10 14:23:18 +10:00
Julien BERAUD
bef8001a09 AP_HAL: added MS5607 baro define 2015-07-10 14:23:17 +10:00
Julien BERAUD
eea7ea8488 AP_HAL: split MPU6000 INS defines for I2C and SPI 2015-07-10 14:23:17 +10:00
Julien BERAUD
7275e33e79 AP_HAL: add the possibility to have more than 1 i2c 
Bebop drone has 3 i2c
 2015-07-10 14:23:17 +10:00
Andrew Tridgell
a6f62c208e AP_HAL: added bebop Linux board type 2015-07-10 10:22:59 +10:00
Julien BERAUD
b32259307d AP_GPS: Add baudrate 230400 for GPS 
Needed by bebop gps by default
 2015-07-10 10:12:52 +10:00
Andrew Tridgell
282efe2d57 AP_Baro: fixed example to run accumulate at 50Hz 2015-07-10 09:59:35 +10:00
Andrew Tridgell
c83d5b1f08 AP_Compass: only build AK8963 driver on Linux 
must match MPU9250 build
 2015-07-09 11:57:27 +10:00
Andrew Tridgell
f4a9f9876f HAL_PX4: make usb_connected() more robust 
thanks to a suggestion from Phillip Kocmoud, this should fix issues
with the XUAV-X2
 2015-07-08 11:19:07 +10:00
Randy Mackay
2f8a7f316f Notify: enable toshibaLED for NAVIO 2015-07-07 20:08:19 +09:00
Staroselskii Georgii
402f46c56f AP_Airspeed: fixed a typo in the ARSPD_DEFAULT_PIN define 
There was a redundant elif for Linux builds.
 2015-07-07 21:02:21 +10:00
Randy Mackay
1d732ddf62 Mount: param desc rename from MAVLink to 3DR Solo 2015-07-07 13:29:24 +09:00
mirkix
1b0f482d37 AP_RangeFinder: Add support for HC-SR04 Range Finder connected to BBB 2015-07-07 08:00:33 +10:00
Randy Mackay
d192b3ccea Compass: set device id for ak8963 and hmc5843 2015-07-06 21:04:46 +09:00
Randy Mackay
ad1f9c4829 DataFlash: add ORGN message 2015-07-06 12:11:49 +09:00
Randy Mackay
03356a8d3a OptFlow: fix parameter descriptions 2015-07-06 11:37:38 +09:00
dgrat
f56f584233 Compass: Improved field rounding in learning 
Signed-off-by: Daniel Frenzel <dgdanielf@gmail.com>
 2015-07-06 11:31:58 +10:00
Daniel Frenzel
c49e44d02c HAL_LInux: RCInput for Navio 
Cleaned the code a bit

Signed-off-by: Daniel Frenzel <dgdanielf@gmail.com>
 2015-07-06 11:19:33 +10:00
kozinalexey
20a04bad77 AP_GPS: request RMC message in NMEA driver 2015-07-06 11:16:12 +10:00
dzollo
5d5d9dc137 AP_GPS: Fix max/min bug on SBP buffering. Log messages whether SBP driver recognizes the msg_type or not. 2015-07-06 10:53:35 +10:00
Lucas De Marchi
efec7723ff AP_InertialSensor: reset the MPU9250 chip on startup 
Now that the initialization of MPU9250 is shared between the
AP_InertialSensor and other drivers using it as a backend, we can reset
the MPU9250 in order to put it in a known state.
 2015-07-06 10:48:07 +10:00
Lucas De Marchi
1deb837e70 AP_Compass: Use common function in MPU9250 for initialization 2015-07-06 10:48:07 +10:00
Lucas De Marchi
eb4e2ac2e5 AP_InertialSensor: factor out MPU9250 initialization 
Now we have the initialization code split in 2 parts:

1) Making sure the MPU9250 chip is alive and working: this is now in a
static function that may be called by other drivers that use MPU9250 as
backend.

2) The configuration of gyro and accel. Once the first part is completed
successfully the AP_InertialSensor_MPU9250 finishes the configuration of
the sensors it uses.

The only change in behavior here is that before we would try 25 time (5x
inside _hardware_init time 5x inside _init_sensor() that calls the first
function) to "boot the chip" and now we are doing "only" 5.
 2015-07-06 10:48:07 +10:00