aepko/Ardupilot2
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
33,925 Commits 72 Branches 509 Tags 683 MiB
96097586c3
Commit Graph

17746 Commits

Author SHA1 Message Date
caijie
a98d892dec AP_Notify: Add RGB LED driver for NCP5623 2018-08-08 07:11:50 +10:00
Andrew Tridgell
301884f7a6 AP_RCProtocol: fixed coverity error in SUMD 
CID308356
 2018-08-07 13:22:08 +10:00
Andrew Tridgell
d1334fab73 AP_ROMFS: fixed error handling in tinflate 
coverity CID308327
 2018-08-07 13:22:08 +10:00
Michael du Breuil
4aff747b28 AP_RCProtocol: Fix out of bounds write, CID 308323 and 308333 2018-08-07 12:11:49 +10:00
Andrew Tridgell
3ed7c060df AP_Compass: address review comments 2018-08-07 10:00:10 +10:00
Jonathan Challinger
cefd998177 AP_Compass: add expected DEV_ID parameters 2018-08-07 10:00:10 +10:00
Jonathan Challinger
878e84a015 AP_Compass: correct edge case where checks pass when saved dev_id != detected dev_id 2018-08-07 10:00:10 +10:00
Michael du Breuil
ee9cc28fda AP_NavEKF2: Utilize the GPS drivers estimate for lag 2018-08-07 09:55:26 +10:00
Michael du Breuil
1a406dacfc AP_GPS: Ensure a lag value is always provided 
The value may not be the optimal value for the driver, but we should
always try to provide a value for the caller
 2018-08-07 09:55:26 +10:00
Michael du Breuil
21dfe02c6e GCS_MAVLink: always send an idea of battery voltage as part of 
BATTERY_STATUS
 2018-08-07 09:52:45 +10:00
Peter Barker
e4ff937c96 RC_Channel: remove min-max-configured pre-arm checks 
These are really, really expensive to run while your RC isn't
configured.

We now have a split between inputs (RC) and servos (SRV), so these
aren't as critical as they were.  We also have range checks to ensure
they're roughly good enough to fly with.
 2018-08-07 09:45:09 +10:00
Peter Barker
eaefdcfac2 AP_Arming: remove min-max-configured pre-arm checks 2018-08-07 09:45:09 +10:00
Peter Barker
87e7cc7ef0 RC_Channels: zero all channels before populating 
Fix for CID 308365
 2018-08-07 09:12:43 +10:00
vierfuffzig
bc52d430f9 Chibios add bootloader for mini-pix 2018-08-07 07:09:39 +10:00
Andrew Tridgell
f0fba01138 AP_Stats: use set_and_save_ifchanged() 
if the board has no GPS then the values usually don't change
 2018-08-06 21:46:06 +10:00
Randy Mackay
1c18d06aa3 AR_AttitudeControl: move unnecessary else 2018-08-06 11:30:22 +09:00
Randy Mackay
9b60e0844b AR_AttitudeControl: add get_desired_pitch accessor 2018-08-06 11:30:22 +09:00
Andrew Tridgell
846418e5e9 HAL_ChibiOS: raise timer thread priority 
needs to be above main for guaranteed DShot and oneshot output periods
 2018-08-06 11:41:42 +10:00
Randy Mackay
c88926f227 Compass: remove accumulate from example sketch 2018-08-06 11:05:34 +10:00
Randy Mackay
99b54935db Compass: remove accumulate 
this method is a noop on all backends
 2018-08-06 11:05:34 +10:00
Peter Barker
f2b1387c1c RC_Channel: add AUTOTUNE to init_aux_function routine 
Also, cark it in SITL if we fail to initialise an aux function
 2018-08-05 07:52:28 +10:00
Andrew Tridgell
53fbdc3750 AP_BLHeli: pass motor mask to serial_setup_output() 2018-08-04 19:29:13 +10:00
Andrew Tridgell
3df2a1c228 HAL_ChibiOS: fixed dshot bad frames 
adding a pre-bit on the DMAR, and ensuring that all groups are setup
for DMA together fixes the remaining bad frames reports in BLHeli32
 2018-08-04 19:29:13 +10:00
Andrew Tridgell
1fe6c7b497 AP_HAL: added chanmask to serial_setup_output() 2018-08-04 19:29:13 +10:00
Andrew Tridgell
946b4db0e6 HAL_ChibiOS: set min dshot separation to 100usec 
this fixes a problem with BLHeli32 not recognising dshot
 2018-08-04 19:29:13 +10:00
Andrew Tridgell
476a40c906 AP_BLHeli: improved reliability of pass-thru support 
this uses a connection cache to prevent re-connecting to an ESC when
not needed, and allows for pass-thru comms on any port, using
SERVO_BLH_PORT parameter
 2018-08-04 19:29:13 +10:00
Andrew Tridgell
22ba9a0aea HAL_ChibiOS: fixed timeout of serial read bytes 
this allows for fast timeout of serial read bytes in BLHeli pass-thru
 2018-08-04 19:29:13 +10:00
Andrew Tridgell
df643d8499 GCS_MAVLink: allow uninstall of alt protocol handler 2018-08-04 19:29:13 +10:00
Andrew Tridgell
769c99d4d7 AP_Baro: added register checking on BMP280 
this follows a log which seems to show an in-flight register
corruption on a MatekF405
 2018-08-04 16:44:08 +10:00
Lucas De Marchi
88df4d127e AP_Common: remove ARRAY_SIZE_SIMPLE 
Now this is basically ARRAY_SIZE, so remove it.
 2018-08-04 15:31:55 +10:00
Lucas De Marchi
668c941717 Global: use new version of ARRAY_SIZE 2018-08-04 15:31:55 +10:00
Lucas De Marchi
57ee0e29f6 AP_Common: simplify ARRAY_SIZE 
This rolls back to the simpler version of ARRAY_SIZE. The more complex
one helps catching bugs when we use pointers when we are expecting an
array, but can't stand arrays with 0 elements.  I'm not aware of bugs it
actually caught on ArduPilot, although it did for me in other projects.

I think this is better than having a separate "_SIMPLE" version of the
macro and spread its usage... the trend is just to use the simpler
version anyway.
 2018-08-04 15:31:55 +10:00
Peter Barker
049f61c943 AP_Camera: populate camera singleton 2018-08-04 11:34:41 +10:00
utkinpol
2912e732b4 HAL_ChibiOS: updated for KakuteF7 2018-08-04 08:24:49 +10:00
Andrew Tridgell
64c8ca514c HAL_ChibiOS: fixed attach_interrupt check 
we can't have two handlers on the same pad
 2018-08-03 13:44:59 +10:00
Andrew Tridgell
4e6ac85057 HAL_ChibiOS: use 32 bit time intervals 
this makes for smaller and faster code. We really don't need 64 bit
intervals as long sleeps are done with a loop.
 2018-08-03 13:44:59 +10:00
Andrew Tridgell
1bd0ea079b HAL_ChibiOS: fixed build on older compilers 
allow build with gcc 4.9.x
 2018-08-03 13:44:59 +10:00
Andrew Tridgell
7aba99e229 HAL_ChibiOS: fixes for ChibiOS version update 2018-08-03 13:44:59 +10:00
Andrew Tridgell
f8e2edbc7f HAL_ChibiOS: fixed cache flush for updated ChibiOS version 2018-08-03 13:44:59 +10:00
Siddharth Purohit
2604b00b43 HAL_ChibiOS: use ch.h header for oslib api 2018-08-03 13:44:59 +10:00
Siddharth Purohit
ea709b9316 AP_Radio: move to using updated time conv API 2018-08-03 13:44:59 +10:00
Siddharth Purohit
9f5dbb74e7 AP_IOMCU: move to using updated time conv API 2018-08-03 13:44:59 +10:00
Siddharth Purohit
ff65487ab3 HAL_ChibiOS: follow updated gpio pin setup procedure 2018-08-03 13:44:59 +10:00
Siddharth Purohit
5f88163e17 HAL_ChibiOS: update configuration and rtlib headers for ChibiOS 18.x.x 2018-08-03 13:44:59 +10:00
Siddharth Purohit
395c48933c HAL_ChibiOS: move tto using updated time conversion API 2018-08-03 13:44:59 +10:00
Siddharth Purohit
4e8d072d6d HAL_ChibiOS: move to using recent pal driver api for GPIO IRQ events 2018-08-03 13:44:59 +10:00
Mark Whitehorn
86b7adf68f AP_HAL_Chibios: fix fmuv3/hwdef.dat printf/STDOUT description and clean up 2018-08-03 13:08:37 +10:00
Peter Barker
aa4cf5b40e SRV_Channel: use method to get rc channels 2018-08-03 13:07:50 +10:00
Peter Barker
ff36eb3aca RC_Channel: remove old members objects 2018-08-03 13:07:50 +10:00
Matt
15823d9e97 AP_LANDING_GEAR: Remove deploy lock 
Since the RC switches only respond to changes, there is no longer a need
for this lock state. The gear can be retracted or deployed by RC switch,
flight mode, or mavlink command freely without convoluted unlocking
methods.  Also removed use of this in the associated Copter code.
 2018-08-03 10:59:15 +09:00
Lucas De Marchi
73f8dd98f2 AP_BoardConfig: kill AP_FEATURE_SAFETY_BUTTON 
This is redundant and can be just HAL_HAVE_SAFETY_SWITCH.
 2018-08-02 13:15:02 -07:00
Lucas De Marchi
259195a7c7 AP_BoardConfig: fix handling of AP_FEATURE_SAFETY_BUTTON 
Not all PX4-based board have a safety button. Rely on
HAL_HAVE_SAFETY_SWITCH instead of ifdef'ing each of them.

This allows to build for aerofc-v1 without safety button.
 2018-08-02 13:15:02 -07:00
Lucas De Marchi
000ae3cb85 AP_BoardConfig: add default for BOARD_SAFETY_ENABLE 
If HAL supports safety button but the board didn't declare a default,
define one to match what is done with BOARD_SAFETY_OPTION_DEFAULT.
 2018-08-02 13:15:02 -07:00
Lucas De Marchi
099eefee87 AP_HAL: Chibios: HAL_GPIO_PIN_SAFETY_IN implies HAL_HAVE_SAFETY_SWITCH 2018-08-02 13:15:02 -07:00
Lucas De Marchi
20778f73f1 AP_HAL_ChibiOS: define HAL_HAVE_SAFETY_SWITCH accordingly 2018-08-02 13:15:02 -07:00
Lucas De Marchi
8e3777a163 AP_HAL_PX4: RCOutput: honour HAL_HAVE_SAFETY_SWITCH 2018-08-02 13:15:02 -07:00
Lucas De Marchi
7f984f2700 AP_HAL: linux: disable safety switch 
Linux boards don't really handle the safety switch.
 2018-08-02 13:15:02 -07:00
Lucas De Marchi
2336d2214b AP_HAL: sitl: disable safety switch 
sitl doesn't really handle the safety switch and it's actually disabled
by AP_FEATURE_SAFETY_BUTTON.
 2018-08-02 13:15:02 -07:00
Andrew Tridgell
13f96bcb00 HAL_ChibiOS: fixed an i2c dma callback bug 
many thanks to Kelly-Foster for chasing me on this one!
 2018-08-02 12:29:02 +10:00
Andrew Tridgell
b0badf8caf HAL_ChibiOS: fixes for F745 builds 2018-08-02 11:56:33 +10:00
Lucas De Marchi
0606b00f15 AP_BoardConfig: don't try to set pwm mode for aerofc-v1 
We don't have that in aerofc, so don't try to initialize it and fail
with following error messages:

    RCOutput: unable to setup AUX PWM with BRD_PWM_COUNT 0
 2018-08-01 16:49:08 -07:00
Randy Mackay
9799567416 AP_Follow: fixup offset initialisation 2018-08-01 20:18:23 +09:00
hoangthien94
f4255712c1 AP_Follow: Initialize offsets based on offset type 2018-08-01 20:18:23 +09:00
Peter Barker
5df70cf93a RC_Channel: update examples for new rc() method 2018-08-01 12:11:30 +09:00
Peter Barker
e2b31a535c AC_PID: update example for new rc() method 2018-08-01 12:11:30 +09:00
Peter Barker
0f084ed5bf RC_Channel: add compatability static functions 
Just to avoid churn in Sub, Plane and Tracker
 2018-08-01 12:11:30 +09:00
Peter Barker
c1a1f4f970 SRV_Channel: use rc() method to get rc singleton 2018-08-01 12:11:30 +09:00
Peter Barker
dbccd6a399 GCS_MAVLink: use rc() method to get rc singleton 2018-08-01 12:11:30 +09:00
Peter Barker
f4c93dc697 DataFlash: use rc() method to get rc singleton 2018-08-01 12:11:30 +09:00
Peter Barker
c209152d13 AP_Tuning: use rc() method to get rc singleton 2018-08-01 12:11:30 +09:00
Peter Barker
497746c3d0 AP_RSSI: use rc() method to get rc singleton 2018-08-01 12:11:30 +09:00
Peter Barker
2489234fcf AP_Mount: use rc() method to get rc singleton 2018-08-01 12:11:30 +09:00
Peter Barker
80a4083fc7 AP_ICEngine: use rc() method to get rc singleton 2018-08-01 12:11:30 +09:00
Peter Barker
1eacd685e3 AP_Arming: use rc() method to get rc singleton 2018-08-01 12:11:30 +09:00
Peter Barker
747fc3814d RC_Channel: rename in_rc_failsafe to has_valid_input 2018-08-01 12:11:30 +09:00
Peter Barker
61c34ea98c RC_Channel: move handling of auxillary switches into RC_Channel 
RC_Channel: move handling of Rover's functions into RC_Channel

RC_Channel: move auxsw handling for camera to base RC_Channel

RC_Channel: add responsibility for servorelay events

RC_Channel: move mode switch handling to base class
 2018-08-01 12:11:30 +09:00
Peter Barker
007434cdac AC_Sprayer: move Copter CHn_OPT to RC_Channel RCn_OPTION 2018-08-01 12:11:30 +09:00
Peter Barker
fb786b8d56 AP_Camera: add singleton 2018-08-01 12:11:30 +09:00
Andrew Tridgell
44fd85ff29 HAL_ChibiOS: reduce memory used by serial buffers 
this does not appear to affect log download speed. It saves about 27k
of memory
 2018-08-01 13:11:16 +10:00
Peter Barker
ce62b2303a DataFlash: add ability to log-disarmed 2018-08-01 11:28:52 +09:00
Michael du Breuil
1e699a53f6 AP_Landing: Fix misspelling in deepstall docs 2018-08-01 09:24:26 +10:00
Michael du Breuil
8357b31e57 AP_Relay: Remove APM doc references 2018-08-01 09:24:26 +10:00
Michael du Breuil
f0a4059d73 AP_Rangefinder: Remove APM doc references 2018-08-01 09:24:26 +10:00
Michael du Breuil
2134373646 AP_RSSI: Remove APM doc references 2018-08-01 09:24:26 +10:00
Michael du Breuil
e82663baf2 AP_BattMonitor: Remove APM doc references 2018-08-01 09:24:26 +10:00
Michael du Breuil
6225f51815 AP_Airspeed: Remove APM doc references 2018-08-01 09:24:26 +10:00
Michael du Breuil
fd9f9cdfe0 AP_BattMonitor: Removed the need to set the battery_voltage flag 2018-08-01 09:22:09 +10:00
Michael du Breuil
a5e974c227 AP_Notify: Reduce flash consumption, fix some drivers, always allow 
buzzer
 2018-08-01 09:22:09 +10:00
Michael du Breuil
cca6b54921 AP_GPS: Remove unneeded field limitations 
Saves ~1100 bytes of flash
 2018-08-01 09:19:20 +10:00
Michael du Breuil
80313abf31 SRV_Channel: Remove useless read from manual passthrough 2018-08-01 09:19:20 +10:00
Michael du Breuil
60f19bbf02 RC_Channel: Allow an input to be ignored 2018-08-01 09:19:20 +10:00
Pierre Kancir
37f7cc4bcf SITL: rearrange Grippers and Sprayers in SITL 2018-07-31 23:34:43 +10:00
Pierre Kancir
96c54550e5 AP_HAL_SITL: rearrange Grippers and Sprayers in SITL 
Adds parameters to configure and disable
 2018-07-31 23:34:43 +10:00
Andrew Tridgell
8b4b38bcb2 DataFlash: removed "no io thread heartbeat" msg 2018-07-31 19:37:17 +10:00
Hwurzburg
19f44f80ad HAL_ChibiOS: Added Omnibus F4 NanoV6 (only V6) 
bench tested all ports
 2018-07-30 19:32:29 +10:00
Andrew Tridgell
4026b9f49d HAL_ChibiOS: probe all external compasses on mini-pix 2018-07-30 17:26:19 +10:00
Andrew Tridgell
2ded88e611 AP_Compass: allow override of QMC5883L orientation 2018-07-30 17:26:19 +10:00
Andrew Tridgell
397ba488db AP_Notify: use NTF_BUZZ_ENABLE to disable tonealarm 2018-07-30 15:42:58 +10:00
Randy Mackay
cb3731e08e Compass: fix compile warning in calibrator output 2018-07-30 14:57:01 +10:00
Andrew Tridgell
1eb010fbf1 AP_Notify: reduced tone buffer size 
100 is plenty
 2018-07-30 14:02:12 +10:00
Andrew Tridgell
bdca329012 HAL_PX4: fixes for new tone_alarm system 
we need to start the driver
 2018-07-30 14:02:12 +10:00
Andrew Tridgell
b11bd33b0e AP_Notify: removed extra call to play_string 2018-07-30 14:02:12 +10:00
Andrew Tridgell
d28c8f0214 AP_Notify: added duration to toneAlarm_set_buzzer_tone 2018-07-30 14:02:12 +10:00
Andrew Tridgell
22d588146e HAL_PX4: added duration to toneAlarm_set_buzzer_tone 2018-07-30 14:02:12 +10:00
Andrew Tridgell
03b7c08be6 HAL_Linux: added duration to toneAlarm_set_buzzer_tone 
required for disco
 2018-07-30 14:02:12 +10:00
Andrew Tridgell
c83567dcba HAL_ChibiOS: added duration to toneAlarm_set_buzzer_tone 2018-07-30 14:02:12 +10:00
Andrew Tridgell
949324ff2b AP_HAL: added duration to toneAlarm_set_buzzer_tone 2018-07-30 14:02:12 +10:00
Jonathan Challinger
ddf0333a24 AP_HAL_Linux: reflect changes to tonealarm interface 2018-07-30 14:02:12 +10:00
Jonathan Challinger
0dd151c0f3 AP_Notify: changes needed for PX4 tonealarm 2018-07-30 14:02:12 +10:00
Jonathan Challinger
4e48923c64 AP_HAL_PX4: implement new tonealarm interface 2018-07-30 14:02:12 +10:00
Jonathan Challinger
f4fc9249f7 AP_Notify: support extended PLAY_TUNE message 2018-07-30 14:02:12 +10:00
Jonathan Challinger
cba85eee7b AP_Notify: MMLPlayer constrain note frequency 2018-07-30 14:02:12 +10:00
Jonathan Challinger
98d962ffa2 AP_Notify: MMLPlayer note_tab static const 2018-07-30 14:02:12 +10:00
Jonathan Challinger
720676b28c AP_Notify: run astyle on ToneAlarm and MMLPlayer 2018-07-30 14:02:12 +10:00
Jonathan Challinger
b31ddedfef AP_Notify: merge ToneAlarm files, use new AP_HAL tonealarm interface 2018-07-30 14:02:12 +10:00
Jonathan Challinger
f5f6220283 AP_HAL_ChibiOS: reflect changes to AP_HAL tonealarm interface 2018-07-30 14:02:12 +10:00
Jonathan Challinger
f936b1dbc2 AP_HAL: change tonealarm interface 2018-07-30 14:02:12 +10:00
murata
396517fe58 DataFlash: Delete unused arguments. 2018-07-30 12:14:49 +09:00
Andrew Tridgell
b1d9f4cc39 AP_SpdHgtControl: update API for TECS change 2018-07-30 13:09:15 +10:00
Andrew Tridgell
f3336fdb60 AP_TECS: removed dependency on soaring controller 2018-07-30 13:09:15 +10:00
Andrew Tridgell
e39d070b78 AP_Compass: clear DEV_ID for undetected compasses 
this prevents user confusion with the number of compasses detected
 2018-07-30 13:07:55 +10:00
Randy Mackay
5cf119cd2f AP_RSSI: const get_gpio and fix includes 2018-07-30 10:14:04 +09:00
Randy Mackay
eb026eef98 AP_RSSI: support pwm input on gpio pin 2018-07-30 10:14:04 +09:00
Randy Mackay
4f6c50b79e AP_RSSI: minor format fix 2018-07-30 10:14:04 +09:00
Randy Mackay
06d26aaaa7 AP_RSSI: clarify PIN_LOW/HIGH parameter description 2018-07-30 10:14:04 +09:00
Andrew Tridgell
72ee20c590 HAL_ChibiOS: added RC input for OMNIBUSF7V2 2018-07-30 10:45:55 +10:00
Timothy Knab
d4c19ebc3c HAL_ChibiOS: Updated OMNIBUSF7V2 
Compasses on the I2C bus are now detected properly and GPS on UART3 works.
 2018-07-30 10:45:55 +10:00
Andrew Tridgell
95aaa01014 HAL_ChibiOS: override COMPASS_AUTO_ROT on several boards 2018-07-28 18:05:12 +10:00
Andrew Tridgell
b181340fd9 AP_Compass: allow override of COMPASS_AUTO_ROT 2018-07-28 18:05:12 +10:00
Andrew Tridgell
8c9f2bc79e AP_IOMCU: fixed setting of rate masks 
this affects layouts which set a subset of channels on a timer
 2018-07-28 15:25:57 +10:00
Andrew Tridgell
1eef29e525 HAL_ChibiOS: only set freq on valid IO channels 2018-07-28 15:25:57 +10:00
Andrew Tridgell
2174c53eb6 HAL_ChibiOS: added Pixhawk1 build target 
this is more obvious to users than fmuv3
 2018-07-27 10:02:31 +10:00
Andrew Tridgell
a8647f834e AP_RangeFinder: fixed VL53L0X semaphore usage 2018-07-27 09:15:32 +10:00
Randy Mackay
8bf6e8e0cf AP_OSD: fix compiler warnings 2018-07-26 10:25:56 -07:00
Alexander Malishev
1377943eb3 HAL_ChibiOS: fix DTCM size in stm32f745 mcu 2018-07-26 17:52:37 +10:00
Michael du Breuil
46355e3de9 AP_Math: Add a warning to rotations to indicate that it is expected to 
match the MAVLink definitions
 2018-07-26 12:58:14 +09:00
liang.tang
8664ed006a AC_Circle: use stopping point to get closest point on circle 2018-07-26 12:12:07 +09:00
Raouf
e55369b1c8 AC_Fence: add always land option 2018-07-26 10:08:45 +09:00
Aaron Wang Shi
1304d37699 AP_HAL_Linux: fix bhat GPS SPI conflict 2018-07-24 11:28:22 -07:00
Andrew Tridgell
b130036798 HAL_SITL: use SIM_RC_CHANCOUNT 2018-07-24 19:44:03 +10:00
Andrew Tridgell
128ea42286 SITL: added SIM_RC_CHANCOUNT parameter 2018-07-24 19:44:03 +10:00
Andrew Tridgell
787493277e AP_Arming: only check trim on valid channel count 2018-07-24 19:44:03 +10:00
Peter Barker
937d8dac97 AP_Motors: remove unneeded initialisations 2018-07-23 16:30:40 +09:00
Peter Barker
610bcb3387 AP_Parachute: remove un-needed initialisations 2018-07-23 13:53:33 +09:00
Peter Barker
ec6e2b9da8 AP_RPM: remove unneeded initialisations 
These should always be static
 2018-07-23 13:53:09 +09:00
Peter Barker
d3877bf2d0 AP_WheelEncoder: remove un-needed initialisations 
Should only be created statically
 2018-07-23 13:52:34 +09:00
Peter Barker
57bc4d8736 AP_Mount: remove un-needed initialisations 
These objects should always be created with new() or statically.
 2018-07-23 13:18:37 +09:00
Michael du Breuil
c5a69d8ec2 AP_Notify: Fix bad loop count on notify LED's 2018-07-23 10:11:29 +09:00
vierfuffzig
1c91bd3588 AP_OSD: added temperature item 2018-07-21 06:32:07 +10:00
Aaron Wang Shi
4f2d9c2c4d AP_HAL_Linux: support PWM input for BH hat 2018-07-20 00:32:55 -07:00
Andrew Tridgell
8a26ca1ddf HAL_ChibiOS: added a DMA reserve heap 
this ensures we keep some DMA-capable memory aside for when it is
needed
 2018-07-20 15:48:21 +10:00
Andrew Tridgell
1dcac14b1e AP_RCProtocol: cleanup code style 
using Tools/CodeStyle/ardupilot-astyle.sh
 2018-07-20 15:47:18 +10:00
Siddharth Purohit
f9ab7e54d4 HAL_ChibiOS: increase sigread buffer size for protocols with longer length 2018-07-20 15:47:18 +10:00
Siddharth Purohit
baff7291ce AP_RCProtocol: add support for srxl and st24 protocol 2018-07-20 15:47:18 +10:00
Siddharth Purohit
f99bd32b51 RC_Protocol: add detection of sumd protocol over sigread 2018-07-20 15:47:18 +10:00
Michael du Breuil
bff985a9f4 AP_Notify: Configure the PCA9685 every boot 2018-07-20 14:53:23 +10:00
Michael du Breuil
961e16dca9 AP_Notify: Use a bitfield to load LED drivers 2018-07-20 14:53:23 +10:00
Andrew Tridgell
73cfd40e7f HAL_ChibiOS: reduce latency of DMA sharing 
if we are sharing a DMA channel between i2c and SPI then this saves
latency on SPI by giving up the DMA channel between retries
 2018-07-20 14:51:18 +10:00
Ebin
ccb32cf357 APM_Control: BRAKE param default is true 2018-07-20 14:41:32 +10:00
Ebin
1dc1b28234 APM_Control: changed default PID for Balance Bot 2018-07-20 14:41:32 +10:00
Ebin
89ffa94427 SITL: Removed redundant variables and modified/deleted commented lines 2018-07-20 14:41:32 +10:00
Ebin
21445e91be SITL: new balancebot physics simulation 2018-07-20 14:41:32 +10:00
Andrew Tridgell
cb19d4dffc AP_HAL: added toneAlarm_set_tune_string 2018-07-20 14:37:16 +10:00
Andrew Tridgell
d93964b319 AP_Notify: support playing tunes by string on ChibiOS 2018-07-20 14:37:16 +10:00
Andrew Tridgell
4244daeb2d HAL_ChibiOS: support playing tunes by string 2018-07-20 14:37:16 +10:00
Andrew Tridgell
98f87f5087 SITL: fixed gimbal for tailsitter 2018-07-20 14:21:06 +10:00
Andrew Tridgell
9a6113e5d8 AP_AHRS: fixed tailsitters in RealFlight 
we need to use the rotated accel for the earth-frame accel
 2018-07-20 14:21:06 +10:00
Andrew Tridgell
cbd6f4cc21 AP_Compass: fixed compass for tailsitters in SITL 2018-07-20 14:21:06 +10:00
Randy Mackay
9eebb6225a AR_AttitudeControl: brake fix to set limit in only one direction 2018-07-19 09:04:50 +08:00
Peter Barker
fdd111a24d AP_HAL_SITL: move include for pthread.h 
We need pthread_t for a member
 2018-07-19 10:27:47 +10:00
E Thomas
c8ce76e8a6 Added support for PX4V1 UARTD in HAL_PX4_Class 2018-07-19 08:11:18 +10:00
Michael du Breuil
16b6201195 RC_Channel: Allow a RC_OVERRIDE_TIMEOUT of -1 to use the overrides 
forever
 2018-07-19 07:53:43 +10:00
Jonathan Challinger
65b20bfd83 AP_IOMCU: fix radio failsafe handling 2018-07-19 06:52:09 +10:00
Andrew Tridgell
ec97e7772d HAL_ChibiOS: rename f4by-ch to F4BY 2018-07-18 21:24:11 +10:00
Alexander Malishev
f265d7e128 AP_Bootloader: add f4by bootloader 2018-07-18 21:10:39 +10:00
Andrew Tridgell
3a8ef21d89 HAL_F4Light: renamed bootloader 2018-07-18 17:49:54 +10:00
Andrew Tridgell
75c5fda222 AP_SerialManager: make console do mavlink2 by default 
this is low impact as it doesn't affect radios that may not do mavlink2
 2018-07-18 16:21:02 +10:00
Randy Mackay
465564ba99 AP_Follow: fix initialisation of offsets 2018-07-18 15:11:09 +09:00
Randy Mackay
0834e7ae9b AP_Follow: update FOLL log column names 
VelN is easier to understand than VelX
Also minor formatting fix
 2018-07-18 15:11:09 +09:00
Randy Mackay
f53bfdbd38 AP_Follow: fix reporting to GCS 2018-07-18 15:11:09 +09:00
Andrew Tridgell
027beb0dc1 AP_Compass: rename COMPASS_ROT_AUTO to COMPASS_AUTO_ROT 
request from Randy
 2018-07-18 16:07:19 +10:00
Andrew Tridgell
15d2daabf0 AP_Compass: don't do auto-orientation if using ROTATION_CUSTOM 2018-07-18 16:07:19 +10:00
Andrew Tridgell
a73492b40a AP_Compass: fixed newline in statustext 2018-07-18 16:07:19 +10:00
Andrew Tridgell
196ba0e858 AP_Compass: make COMPASS_ROT_AUTO take 3 values 
0 for disabled, 1 for check only, 2 for check and fix
 2018-07-18 16:07:19 +10:00
Andrew Tridgell
d15a4ad92a AP_Compass: improved error reporting, check all compasses 
this uses extensions to the MAG_CAL_REPORT message to convey failures
of orientation checking.

It also checks all compasses, external or internal. It only tries to
fix the orientation if it is external
 2018-07-18 16:07:19 +10:00
Andrew Tridgell
a5749c1869 AP_Compass: allow diagonals and off-diagonals to be calculated on rot change 
this re-runs the fit on change in orientation
 2018-07-18 16:07:19 +10:00
Andrew Tridgell
b4c7d1925e AP_Compass: allow for runtime changes to SIM_MAG_DIA_? 
this makes for easier testing
 2018-07-18 16:07:19 +10:00
Andrew Tridgell
3c2e8baee2 AP_Compass: improved orientation reporting 
and fail magcal if we fail orientation detection for an external
compass
 2018-07-18 16:07:19 +10:00
Andrew Tridgell
8b0f40b402 AP_Compass: implement automatic compass orientation 
this automatically determines the compass orientation when doing a 3D
compass calibration, if COMPASS_ROT_AUTO is enabled.
 2018-07-18 16:07:19 +10:00
Andrew Tridgell
4acc06df87 AP_Compass: support diagonal, off-diagonal and rotation in SITL 
compass
 2018-07-18 16:07:19 +10:00
Andrew Tridgell
8170fbcf80 AP_Math: added a comment on conventions for to_euler() 2018-07-18 16:07:19 +10:00
Andrew Tridgell
d1f67f6ded SITL: added diagonal, off-diagonal and orientation of SITL compass 2018-07-18 16:07:19 +10:00
Andrew Tridgell
1056e64419 AP_AHRS: added get_DCM_rotation_body_to_ned() 
this specifically asks for the DCM attitude, which will be used for
the comass calibration to help determine compass orientation
 2018-07-18 16:07:19 +10:00
Andrew Tridgell
5b0b9ef962 AP_AHRS: don't do yaw correction in DCM while calibrating compass 
this avoids applying bad compass yaw, and helps the compass
calibration code
 2018-07-18 16:07:19 +10:00
Andrew Tridgell
caa553e727 HAL_ChibiOS: fixed internal i2c mask for Pixracer 2018-07-18 12:04:01 +10:00
Andrew Tridgell
59aab9987e HAL_ChibiOS: account for I2C base in compass masks 2018-07-18 12:04:01 +10:00
Randy Mackay
3d72022f6e EKF: modify ALT_SOURCE param description 
We regularly find users changing the ALT_SOURCE to 1 (range finder) when trying to implement terrain following which is not the correct way to do it
 2018-07-18 08:31:09 +09:00
Patrick José Pereira
2ba6f64281 SITL: Remove unused variables 
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2018-07-17 20:25:22 +09:00
Michael du Breuil
e4a8e9deb1 AP_RCMapper: Mark sub specific parameters as sub only for docs 2018-07-17 12:08:27 +10:00
Michael du Breuil
fc44f693e5 AP_Airspeed: Remove unused ADC include 2018-07-17 09:29:50 +10:00
Michael du Breuil
65df5c3ff6 AP_AHRS: Remove unused ADC include 2018-07-17 09:29:50 +10:00
Michael du Breuil
08ef60d436 AP_ADC: Remove unused AP_ADC class 2018-07-17 09:29:50 +10:00
Michael du Breuil
1e7a06ef6b AP_Mount: Remove unused ADC include 2018-07-17 09:29:50 +10:00
Michael du Breuil
a5b8279ea4 AP_Motors: Remove unused ADC include 2018-07-17 09:29:50 +10:00
Michael du Breuil
dddb1e6a58 AP_Module: Remove unused ADC include 2018-07-17 09:29:50 +10:00
Michael du Breuil
1efad07a84 AP_InertialSensor: Remove unused ADC include 2018-07-17 09:29:50 +10:00
Michael du Breuil
2e135f4fc4 AP_HAL_Linux: Remove unused ADC include 2018-07-17 09:29:50 +10:00
Michael du Breuil
fcb1c4cdfd AP_GPS: Remove unused ADC include 2018-07-17 09:29:50 +10:00
Michael du Breuil
875e03bdd9 AP_BattMonitor: Remove unused ADC include 2018-07-17 09:29:50 +10:00
Michael du Breuil
57f3e9cd88 AP_Airspeed: Remove unused ADC include 2018-07-17 09:29:50 +10:00
bnsgeyer
0f75866042 AP_Motors: Tradheli-corrected get_motor_mask method 2018-07-16 12:41:16 +10:00
bnsgeyer
dec8c5de77 AP_Motors: convert heli code to use SRV_Channels 
this converts the heli code to use the SRV_Channels output
functions. It does not change behaviour, but removes the last vehicle
type that did its own servo output calculations.  This change also
fixed servo initialization conflicts.

Note that this also allows helis to be setup with more than one
channel for a particular output (eg. two separate channels for tail
servo if they are wanted). This isn't likely to be used much, but does
make heli consistent with other vehicle types
 2018-07-16 12:41:16 +10:00
bnsgeyer
c3d4b792ad SRV_Channel: fixes channel numbering for channel already assigned message 2018-07-16 12:41:16 +10:00
bnsgeyer
73df3e0af2 SRV_Channel: modified set_output_pwm_trimmed for reverse property 
Modified function to account for servo reverse property
 2018-07-16 12:41:16 +10:00
Andrew Tridgell
e94177e469 SRV_Channel: added function based set_output_min_max 
this is for a conversion of AP_Motors heli code to servo functions
 2018-07-16 12:41:16 +10:00
Alexander Malishev
4342dae065 HAL_ChibiOS: define BOARD_RSSI_ANA_PIN to simpify tuning 2018-07-16 08:29:49 +10:00
Alexander Malishev
e04f438ce3 HAL_ChibiOS: fix analog pins on MatekF405 2018-07-16 08:29:49 +10:00
Alexander Malishev
89f7d652e0 HAL_ChibiOS: removed wrong led pin 2018-07-16 08:29:49 +10:00
Alexander Malishev
13b56d5870 AP_OSD: improve AHI for large roll angles 2018-07-14 18:08:36 +10:00
Andrew Tridgell
3c0ed01fd0 AP_Compass: prevent use of null dev_icm device in ICM20948 driver 2018-07-14 17:51:50 +10:00
Andrew Tridgell
ed09467f06 AP_BoardConfig: removed verbose SPI probe debug messages 
these are just confusing for users
 2018-07-14 17:51:50 +10:00
Andrew Tridgell
71647cfc6b AP_Compass: removed HMC5843 compass probe error 2018-07-14 17:51:50 +10:00
Andrew Tridgell
2a62938fb1 AP_BoardConfig: enable get_board_type() on all boards 
return BOARD_TYPE_UNKNOWN for boards that don't use board detection
 2018-07-14 17:51:50 +10:00
Andrew Tridgell
9ab55f6838 HAL_ChibiOS: probe for external compasses on several boards 
boards that have no internal compass will now probe for all external
compass types
 2018-07-14 17:51:50 +10:00
Andrew Tridgell
ff6d639ed7 AP_Compass: separated out external compass probing 
this allows any ChibiOS board to specify that it wants to probe for
all possible external compass types with a define in hwdef.dat

It also implements duplicate compass detection for all i2c drivers,
ensuring we can't get a load of a driver on the same bus/address twice
 2018-07-14 17:51:50 +10:00
Andrew Tridgell
476bddd9a3 HAL_ChibiOS: use HAL_I2C_INTERNAL_MASK 2018-07-14 17:51:50 +10:00
Andrew Tridgell
0fc6ca22f7 AP_HAL: setup HAL_I2C_INTERNAL_MASK for ChibiOS 2018-07-14 17:51:50 +10:00
Andrew Tridgell
63d385ffb1 AP_AHRS: fixed arming with no compass in plane 
allow arming if the GPS quality is good, the yaw alignment and
position will fix itself once the vehicle starts moving
 2018-07-14 17:49:52 +10:00
Andrew Tridgell
ac40a20c02 AP_NavEKF3: fill in gps_quality_good flag 2018-07-14 17:49:52 +10:00
Andrew Tridgell
3d31773fb4 AP_NavEKF2: fill in gps_quality_good flag 2018-07-14 17:49:52 +10:00
Andrew Tridgell
103d1aea41 AP_NavEKF: added gps_quality_good EKF flag 2018-07-14 17:49:52 +10:00
heitiane
2c24bac79e BARO_generic: add Dummy GCS to meet the requirement of AP_Baro::calibrate(). 2018-07-14 10:32:51 +10:00
vierfuffzig
78386ed080 AP_OSD: added OSD_MSG_TIME parameter 2018-07-14 09:07:42 +10:00
Andrew Tridgell
7eabee04a3 HAL_ChibiOS: enable OSD on KakuteF7 2018-07-13 14:53:53 +10:00
Andrew Tridgell
b96f24c80e HAL_ChibiOS: added KakuteF7 
thanks to Huibean for the fixes!
 2018-07-13 14:53:53 +10:00
Andrew Tridgell
dc54babe41 SITL: setup more defaults with flightaxis 
with copters now you only need to set FRAME_CLASS to fly
 2018-07-13 10:19:01 +10:00
Andrew Tridgell
7ec6522b9d AP_Compass: default to right mag offsets for SITL 2018-07-13 10:19:01 +10:00
Andrew Tridgell
2fe2c8fbda AP_Compass: initialise compass IDs saved in SITL 
this ensures we don't get uncalibrates compasses in SITL
 2018-07-13 10:19:01 +10:00
Andrew Tridgell
5f8b57ba19 AP_InertialSensor: added SITL device IDs 2018-07-13 10:19:01 +10:00
Andrew Tridgell
823c4523b3 AP_Compass: added SITL device IDs 2018-07-13 10:19:01 +10:00
Andrew Tridgell
464dc9102f AP_HAL: added device types for SITL 
and fixed a stack init bug for make_bus_id
 2018-07-13 10:19:01 +10:00
Andrew Tridgell
f2d602690e HAL_ChibiOS: fixed build error with some compilers 2018-07-13 08:50:46 +10:00
Andrew Tridgell
83f38d536e HAL_ChibiOS: fixed flow control auto-detect without DMA 
this fixes automatic flow control detection when we are not using DMA
for TX
 2018-07-13 07:34:30 +10:00
Andrew Tridgell
0201893f7c HAL_ChibiOS: fixed peripheral power-up on fmuv5 
we need to do the powerup before we initialise the UARTs
 2018-07-13 07:34:30 +10:00
Andrew Tridgell
409e857f6b HAL_ChibiOS: use pullup on CTS line 
this makes life less difficult for SiK radios which go into bootloader
mode on low CTS
 2018-07-13 07:34:30 +10:00
Andrew Tridgell
11e09a846c HAL_ChibiOS: setup RTS pins as pullup 
this prevents RTS pins from keeping SiK radios in bootloader mode on
peripheral powerup
 2018-07-13 07:34:30 +10:00
Andrew Tridgell
63a0a4979c HAL_ChibiOS: delay peripheral power on for fmuv5 
this should prevent SiK radios staying in the bootloader
 2018-07-13 07:34:30 +10:00
Michael du Breuil
0aaa029f9b AP_HAL_Linux: GPIO_RPi: Fix UB when reading a pin 
You can't shift by more then the word width
 2018-07-11 23:09:52 -07:00
Michael du Breuil
d06a82af1d AP_HAL_VRBrain: Remove GPIO::analogPinToDigitalPin() 2018-07-11 23:09:52 -07:00
Michael du Breuil
1ac78d3a80 AP_HAL_SITL: Remove GPIO::analogPinToDigitalPin() 2018-07-11 23:09:52 -07:00