Commit Graph

20170 Commits

Author SHA1 Message Date
Andrew Tridgell
03bb94599b HAL_ChibiOS: support I2C sensor probes by bus mask 2019-05-30 15:39:57 +10:00
Andrew Tridgell
fc1ec8a465 HAL_ChibiOS: convert airbot to new config 2019-05-30 15:39:57 +10:00
Andrew Tridgell
82b171582e HAL_ChibiOS: added sensor config for cube varients 2019-05-30 15:39:57 +10:00
Andrew Tridgell
c36d76c213 HAL_ChibiOS: convert Pixhawk1 to new sensor config
saves 26k of flash, making 1M boards work for longer
2019-05-30 15:39:57 +10:00
Andrew Tridgell
eae852962e HAL_ChibiOS: fixed case of no IMU, BARO or COMPASS config settings 2019-05-30 15:39:57 +10:00
Andrew Tridgell
068e6ea8d2 HAL_ChibiOS: convert KakuteF4 and KakuteF7 to new sensor config 2019-05-30 15:39:57 +10:00
Andrew Tridgell
1b0bf88c8f HAL_ChibiOS: convert crazyflie2 to new config 2019-05-30 15:39:57 +10:00
Andrew Tridgell
b47ab5c8a9 HAL_ChibiOS: support I2C sensor config in hwdef.dat 2019-05-30 15:39:57 +10:00
Andrew Tridgell
4c5b651296 AP_HAL: removed board type for mRoControlZeroF7 2019-05-30 15:39:57 +10:00
Andrew Tridgell
38c775e6df AP_Compass: removed old mRoControlZeroF7 config 2019-05-30 15:39:57 +10:00
Andrew Tridgell
aef343bfd0 AP_InertialSensor: removed old mRoControlZeroF7 config 2019-05-30 15:39:57 +10:00
Andrew Tridgell
ceb9c3b83e HAL_ChibiOS: convert mRoControlZeroF7 to new sensor config 2019-05-30 15:39:57 +10:00
Andrew Tridgell
039e7366b0 AP_InertialSensor: support new sensor config setup 2019-05-30 15:39:57 +10:00
Andrew Tridgell
481ae22671 AP_Compass: support new sensor config setup 2019-05-30 15:39:57 +10:00
Andrew Tridgell
f7b9368b94 AP_Baro: support new sensor config setup 2019-05-30 15:39:57 +10:00
Andrew Tridgell
5eb488303c HAL_ChibiOS: convert Pixracer to use new sensor config 2019-05-30 15:39:57 +10:00
Andrew Tridgell
e198d552a8 HAL_ChibiOS: support IMU, COMPASS and BARO lines in hwdef.dat
this allows for main sensors to be set in hwdef.dat, making adding new
boards simpler
2019-05-30 15:39:57 +10:00
Andrew Tridgell
532b82b3a3 AP_Compass: use DRIVER_HMC5843 to match driver name 2019-05-30 15:39:57 +10:00
Tom Pittenger
c67a585b68 AP_Proximity: increase angular resoluion to mavlink packet OBSTACLE_DISTANCE 2019-05-29 18:22:53 -07:00
Peter Barker
1c4b5b0d73 AP_Arming: move arm status statustext messages back into vehicles
Not all vehicle maintainers like having these emitted as part of normal
operations.
2019-05-30 07:37:30 +09:00
Peter Barker
61a2be1470 AP_Arming: change arm and disarm to account for Copter now using them 2019-05-30 07:37:30 +09:00
Peter Barker
75ae6b59b0 GCS_MAVLink: allow Copter to disallow mavlink disarm 2019-05-30 07:37:30 +09:00
Peter Barker
84b16ea3dd AP_Arming: move check for ARMING_CHECK_NONE back into relevant vehicles
Plane and Rover allow all prearm and arm checks to be bypassed with
ARMING_CHECK_NONE.  Not all vehicles allow this, so move this bypass
back into Plane and Rover.
2019-05-30 07:37:30 +09:00
Peter Barker
e340873d88 GCS_MAVLink: canonicalise on success on commanded-to-arm-when-armed
This means the mavlink return value indicates the current arm status of
the vehicle rather than success/failure of transitioning to the armed or
disarmed state (where trying to arm when armed is considered a failure).

MAVLink is a lossy communication mechanism.  It would not be
unreasonable for a GCS to issue a disarm command multiple times to
increase the chances of the command getting through.
2019-05-30 07:37:30 +09:00
Peter Barker
c38e5ba4fc RC_Channel: handle AUX_FUNC::ARMDISARM 2019-05-30 07:37:30 +09:00
Peter Barker
b857d2c1af GCS_MAVLink: handle MAV_CMD_COMPONENT_ARM_DISARM 2019-05-30 07:37:30 +09:00
Peter Barker
d67e68eb03 AP_Logger: move LOG_ARM_DISARM_MSG in 2019-05-30 07:37:30 +09:00
Peter Barker
aff6cb424f AP_Arming: move Log_Write_Arm_Disarm in, make disarm virtual 2019-05-30 07:37:30 +09:00
Peter Barker
d384827291 AP_Arming: add singleton 2019-05-30 07:37:30 +09:00
Andrew Tridgell
48ac028cd0 AP_OSD: take ahrs and baro semaphores
this ensures OSD data is self-consistent within each item
2019-05-30 08:33:12 +10:00
Andrew Tridgell
5023b51679 AP_Baro: added semaphore for safe multi-thread use of APIs 2019-05-30 08:33:12 +10:00
Peter Barker
e4de5a17d1 AP_Math: add pitch-7 to rotation tests 2019-05-29 17:12:32 +10:00
Andrew Tridgell
e2eda63d2c AP_Math: added new rotation for PITCH_7 2019-05-29 17:12:32 +10:00
Peter Barker
977fe09276 AP_Math: add a more complex polygon for Polygon_outside tests 2019-05-29 15:34:02 +10:00
Peter Barker
d3971c18fa AP_Math: more tests for closed-vs-open polygons 2019-05-29 15:34:02 +10:00
Peter Barker
d74e6db12e AP_Math: add more tests for Polygon_outside 2019-05-29 15:34:02 +10:00
Peter Barker
da81c5fe39 AP_Beacon: do not include fence closing/duplicate point in polygon boundary 2019-05-29 15:34:02 +10:00
Peter Barker
de9fa4c730 AC_Avoid: call Polygon_outside directly; avoids losing first point 2019-05-29 15:34:02 +10:00
Peter Barker
4be3a48275 AC_Avoid: adjust for renamed get_polygon_points 2019-05-29 15:34:02 +10:00
Peter Barker
2822c635ec AC_Fence: correct get_boundary_points to account for closing point
Also rename from get_polygon_points
2019-05-29 15:34:02 +10:00
Peter Barker
36fe9a18a0 AP_Math: make Polygon_outside cope with being passed unclosed polygons 2019-05-29 15:34:02 +10:00
Randy Mackay
2061621951 AP_Proximity: default YAW_CORR to 0
The default of 22 was good when the Lightware SF40C was our only proximity sensor but not good now that we have numerous options
2019-05-29 11:17:28 +09:00
Randy Mackay
ff3d3d256c AP_Proximity: RPLidarA2 supports yaw-correction and orientation params 2019-05-29 11:17:28 +09:00
斯东Stone
c0e8a443af AP_OpticalFlow: Correct CX-OF Data Format Sequence
Correct CX-OF (a.k.a. UART Version PMW3901) Data Format Sequence
2019-05-29 10:22:51 +09:00
Randy Mackay
ce44d127c0 AR_WPNav: add is_destination_valid accessor 2019-05-29 09:40:05 +09:00
Peter Barker
ab7ee4fefb AP_Common: Location.cpp: add sanity checks 2019-05-29 09:04:37 +09:00
Michael Oborne
6031f5b6a9 AP_GPS_UBLOX: add support for TIMEGPS message. used to get gps week 2019-05-29 09:48:17 +10:00
Peter Barker
fc71e1ba53 AP_InternalError: add internal error for out-of-range bitmask ops 2019-05-28 09:43:17 +10:00
Peter Barker
9d4bdbf3d5 AP_Common: add sanity check into bitmask get/set
Also return false if we are asked about an out-of-bounds bit
2019-05-28 09:43:17 +10:00
Peter Hall
5839c1ebf6 SITL: Sailboat: write rpm and airspeed for windvane backends 2019-05-28 08:35:58 +09:00
Peter Hall
f26e1dc8e8 AP_WindVane: add modern devices rev p cal 2019-05-28 08:35:58 +09:00
Peter Hall
9dba9867c6 AP_WindVane: mini onion 2019-05-28 08:35:58 +09:00
Peter Barker
dbbf09d018 AP_Proximity: minor performance enhancements 2019-05-28 09:19:48 +10:00
Peter Barker
1c7a8c1509 AP_Beacon: correct parameter documentation to include SITL 2019-05-28 09:16:47 +10:00
Peter Barker
64aafb2af2 AP_Math: add Polygon_outside tests for long template instantiation 2019-05-28 09:08:07 +10:00
Peter Barker
51a0401383 AP_Math: correct Polygon_outside floating point instatiation
This routine was entemplatificated from the integer version, which was
designed to be perfect across representable ranges of points.  The
floating point version suffered from a rounding problem.
2019-05-28 09:08:07 +10:00
Peter Barker
b35b65eed1 AP_Math: add GTEST suite for Polygon_outside 2019-05-28 09:08:07 +10:00
Peter Barker
1ce2424e49 AP_HAL_Linux: add required override keyword on configure_parity
Also remove virtual - doesn't make sense here.
2019-05-27 09:55:18 -07:00
Michael du Breuil
a1fda8bc76 AP_BLHeli: Update to support newer targets and protocols 2019-05-25 09:37:56 +10:00
Lucas De Marchi
4f73881c4b AP_RangeFinder: TFMiniPlus: enforce minimum version 1.7.6
On this version of the firmware the command changed - support the new
command and only that one: it's not expected to have devices with the
older versions.
2019-05-24 01:47:04 -07:00
Lucas De Marchi
b3a8496613 AP_RangeFinder: add support for Benewake TFMini Plus on I2C
This was tested with firmware 1.7.0 on the sensor.
2019-05-24 01:47:04 -07:00
Peter Barker
f09efe0908 AP_Math: correct URL for Polygon_outside algorithm 2019-05-24 13:17:43 +10:00
Phillip Kocmoud
734abe3d7d hwdef: Correct typo for mRo x2.1-777 USB PID
This needed to match the firmware directory which contains the compiled binaries hosted at http://firmware.ardupilot.org so that MissionPlanner can automatically download and update firmware.
2019-05-23 11:05:42 +10:00
Rajat Singhal
8097b0ede3 SITL: Gazebo: Fixed comment, typos 2019-05-23 08:23:37 +09:00
Peter Barker
1b90643751 GCS_MAVLink: report more internal errors in SYS_STATUS 2019-05-23 07:29:29 +10:00
Peter Barker
43152a416c AC_Avoid: stop taking references to ahrs, fence, proximity and beacon 2019-05-22 07:48:02 -06:00
Peter Barker
b086b39f89 AP_Proximity: add AP::proximity() singleton getter 2019-05-22 07:48:02 -06:00
Peter Barker
8ce4f73550 AP_Beacon: add singleton 2019-05-22 07:48:02 -06:00
Peter Barker
a7c5f5a6c8 AP_Mission: break out a convert_MISSION_ITEM_to_MISSION_ITEM_INT method
AP_Mission: remove unused mission_cmd_to_mavlink

AP_Mission: eliminate mavlink_to_mission_cmd (use mavlink_int_to_mission_cmd)
2019-05-22 08:53:45 +10:00
Peter Barker
8911e67900 AP_Rally: adjust to allow for uploading via the mission item protocol
AP_Rally: add a set_rally_total method

Rally: remove restriction of only setting rally points below the param count

Rally: implement truncate/append interface
2019-05-22 08:53:45 +10:00
Peter Barker
d0105c8fa7 GCS_MAVLink: factor mission handling, use for Rally
GCS_MAVLink: allow all mission types to be cleared

GCS_MAVLink: remove unused parameters from handle-mission-count
2019-05-22 08:53:45 +10:00
Peter Barker
aaf98f942f AP_InternalError: add internal error for link errors in mission protocol 2019-05-22 08:53:45 +10:00
Peter Barker
a5f5b4349c AP_Logger: add a Write_Rally method 2019-05-22 08:53:45 +10:00
alancaro2013
a1557184d5 AP_RangeFinder: Modified uLanding parse to check device version.
US-D1 version ID was changed to 2 from 0. This alteration will prevent
past US-D1s, with version ID 0, from being 3-byte parsed.
2019-05-22 08:20:42 +10:00
Andrew Tridgell
19ace7cace RC_Channel: guarantee logging of RCIN on switch changes 2019-05-22 07:37:56 +10:00
Pierre Kancir
3fa419e132 AP_Baro: fix LPS22H on I2C 2019-05-22 07:37:20 +10:00
Pierre Kancir
2348fa4201 AP_Baro: probe HAL_BARO_LPS22H_I2C 2019-05-22 07:37:20 +10:00
Pierre Kancir
a4330f90b1 AP_HAL: add HAL_BARO_LPS22H_I2C 2019-05-22 07:37:20 +10:00
Stone white
8b7b5f0db9 AP_OpticalFlow: Make PX4FLOW work on all external I2C buses 2019-05-21 09:44:26 +10:00
Francisco Ferreira
869a369cc0 AP_AHRS: support NMEA output 2019-05-21 09:41:15 +10:00
Francisco Ferreira
e06556a677 AP_SerialManager: support NMEA output 2019-05-21 09:41:15 +10:00
Francisco Ferreira
80093f41b0 AP_NMEA_Output: new library for writing NMEA to serial ports 2019-05-21 09:41:15 +10:00
Francisco Ferreira
0e33907cf7 AP_HAL_SITL: change NMEA output to use new macro 2019-05-21 09:41:15 +10:00
Francisco Ferreira
6e95a144ef AP_Math: add macro for m/s to knots convertion 2019-05-21 09:41:15 +10:00
Peter Barker
32a6f0026a AP_OSD: add mutex against maniplating sf windows from different threads 2019-05-21 09:21:56 +10:00
Peter Barker
02e34c95c9 AP_Notify: add mutex against maniplating sf windows from different threads 2019-05-21 09:21:56 +10:00
Peter Barker
2fa1f041e3 AP_Notify: add SITL RGBLed 2019-05-21 09:21:56 +10:00
murata
9ed38eaf7b AP_OpticalFlow: Change to collected CRC header 2019-05-21 09:19:19 +10:00
murata
c6bcb1d54c AP_Math: Collect CRC16 into CRC file
AP_Math: Collect CRC16 into CRC file
2019-05-21 09:19:19 +10:00
Patrick José Pereira
dc238946b0 AP_ROMFS: Add missing header guard
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2019-05-20 23:50:23 +01:00
Patrick José Pereira
b54399b9a7 AP_ICEngine: Add missing header guard
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2019-05-20 23:50:23 +01:00
Patrick José Pereira
fe3d4e2c3b AP_HAL: Utility: Add missing header guard in packetise
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2019-05-20 23:50:23 +01:00
Patrick José Pereira
c4825a6d02 AP_Button: Add missing header guard
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2019-05-20 23:50:23 +01:00
Jaaaky
f21e4d833c AP_NavEKF3: Fix GPS < 3D empty PreArm: msg-as EKF2 2019-05-20 16:57:57 +10:00
Andrew Tridgell
4888583e17 AP_Scheduler: use task -3 for wait_for_sample() 2019-05-17 09:00:22 +10:00
Andrew Tridgell
e801821f0c AP_Scheduler: log SPI and I2C counters in PM msg 2019-05-17 08:56:06 +10:00
Andrew Tridgell
6b1374e55c AP_Logger: log SPI and I2C counters in PM msg 2019-05-17 08:56:06 +10:00
Andrew Tridgell
59678840a8 HAL_ChibiOS: log SPI and I2C counters 2019-05-17 08:56:06 +10:00
Andrew Tridgell
e64c5ef354 AP_HAL: added SPI and I2C counters 2019-05-17 08:56:06 +10:00
Andrew Tridgell
e2d863498b GCS_MAVLink: clear last msgs when done
this makes MON and WDOG logs clearer
2019-05-17 08:56:06 +10:00
Peter Barker
0a3fe32209 AP_HAL_SITL: log watchdog reset 2019-05-16 17:21:24 +10:00
Peter Barker
f5190d1bcc AP_HAL_ChibiOS: use logger().WriteCritical(...) for WDOG message 2019-05-16 17:21:24 +10:00
Peter Barker
0225b6817a AP_Logger: examples: add test for Write and WriteCritical 2019-05-16 17:21:24 +10:00
Peter Barker
54eff7eafc AP_Logger: add WriteCritical method to AP::logger()
For callers who emphatically want their custom messages to be written out.
2019-05-16 17:21:24 +10:00
Andrew Tridgell
2fc95f88ae AP_Notify: fixed handling of mavlink LED override 2019-05-16 15:17:37 +10:00
Peter Barker
9dc4e17564 AP_LeakDetector: add missing override keywords 2019-05-15 21:05:20 +10:00
Peter Barker
93c33fda1d RangeFinder: correct bad include of old semaphore library 2019-05-15 19:34:31 +09:00
Peter Barker
18999aab72 AP_OpticalFlow: correct bad include of old semaphore library 2019-05-15 19:34:31 +09:00
Siddharth Purohit
479c238177 RangeFinder: add support for rangefinder sensor over can 2019-05-15 16:01:53 +09:00
Siddharth Purohit
e866a574dd AP_UAVCAN:add hex flow sensor message 2019-05-15 16:01:53 +09:00
Siddharth Purohit
c4360264cf AP_UAVCAN: add support for hereflow and range sensor message over can 2019-05-15 16:01:53 +09:00
Siddharth Purohit
67fcd773a6 OpticalFlow: add support for HereFlow message over can 2019-05-15 16:01:53 +09:00
Andrew Tridgell
0708b65c2d AP_HAL_ChibiOS: added const for PersistentData 2019-05-15 15:33:48 +10:00
Andrew Tridgell
670015b30e AP_AHRS: added const for PersistentData 2019-05-15 15:33:48 +10:00
Andrew Tridgell
ba9b92c4af AP_Compass: rename to EXPECT_DELAY_MS() 2019-05-15 15:33:48 +10:00
Andrew Tridgell
6fa69c2297 AP_Logger: rename to EXPECT_DELAY_MS() 2019-05-15 15:33:48 +10:00
Andrew Tridgell
3823ba539c AP_InertialSensor: rename to EXPECT_DELAY_MS() 2019-05-15 15:33:48 +10:00
Andrew Tridgell
48302427c7 HAL_ChibiOS: rename to EXPECT_DELAY_MS() 2019-05-15 15:33:48 +10:00
Andrew Tridgell
911a99b79e AP_HAL: removed hal argument to EXPECT_DELAY_MS() 2019-05-15 15:33:48 +10:00
Andrew Tridgell
f8bcdf9d3a HAL_SITL: fixed cygwin build error 2019-05-15 15:33:48 +10:00
Andrew Tridgell
85ce10adfd AP_Math: fixed test build 2019-05-15 15:33:48 +10:00
Andrew Tridgell
c1b201d051 HAL_SITL: fixed comment typo 2019-05-15 15:33:48 +10:00
Andrew Tridgell
d2c9db3f1f AP_FlashStorage: fixed build error with -O0 2019-05-15 15:33:48 +10:00
Andrew Tridgell
a7eb85e1c5 HAL_ChibiOS: cope with nesting of expected_delay_ms() 2019-05-15 15:33:48 +10:00
Andrew Tridgell
64c723fd31 GCS_MAVLink: record mavlink msg IDs for watchdog 2019-05-15 15:33:48 +10:00
Andrew Tridgell
8d0bca6ba9 HAL_ChibiOS: log mavlink IDs and semaphore lines for watchdog
this gives a better chance of tracking down a hang
2019-05-15 15:33:48 +10:00
Andrew Tridgell
c786674442 AP_HAL: record mavlink msg IDs and semaphore line 2019-05-15 15:33:48 +10:00
Andrew Tridgell
4cdfe6bac3 AP_Logger: use EXPECT_DELAY() macro 2019-05-15 15:33:48 +10:00
Andrew Tridgell
02326ac52c AP_InertialSensor: use EXPECT_DELAY() macro 2019-05-15 15:33:48 +10:00
Andrew Tridgell
1b8cbfc6a4 HAL_ChibiOS: use EXPECT_DELAY() macro 2019-05-15 15:33:48 +10:00
Andrew Tridgell
ecc6f15dc0 AP_Compass: use EXPECT_DELAY() macro 2019-05-15 15:33:48 +10:00
Andrew Tridgell
b1ed77bee9 AP_HAL: added EXPECT_DELAY() macro
this prevents nesting errors in use of EXPECT_DELAY(), ensuring we
always close the expected delay
2019-05-15 15:33:48 +10:00
Andrew Tridgell
3772f58be9 GCS_MAVLink: removed unusued AP_Common/Semaphore.h 2019-05-15 15:33:48 +10:00
Andrew Tridgell
1443f0c3f9 AP_UAVCAN: removed unusued AP_Common/Semaphore.h 2019-05-15 15:33:48 +10:00
Andrew Tridgell
24636aeb45 AP_ToshibaCAN: removed unusued AP_Common/Semaphore.h 2019-05-15 15:33:48 +10:00
Andrew Tridgell
09792d3056 AP_RangeFinder: removed unusued AP_Common/Semaphore.h 2019-05-15 15:33:48 +10:00
Andrew Tridgell
37936a125f AP_RAMTRON: removed unusued AP_Common/Semaphore.h 2019-05-15 15:33:48 +10:00
Andrew Tridgell
b3b59c7298 AP_OSD: removed unusued AP_Common/Semaphore.h 2019-05-15 15:33:48 +10:00
Andrew Tridgell
0de65ca734 AP_Notify: removed unusued AP_Common/Semaphore.h 2019-05-15 15:33:48 +10:00
Andrew Tridgell
a3b283708b AP_IRLock: removed unusued AP_Common/Semaphore.h 2019-05-15 15:33:48 +10:00
Andrew Tridgell
4e769730c9 AP_InertialSensor: removed unusued AP_Common/Semaphore.h 2019-05-15 15:33:48 +10:00
Andrew Tridgell
916b3003e1 AP_HAL_SITL: removed unusued AP_Common/Semaphore.h 2019-05-15 15:33:48 +10:00
Andrew Tridgell
a159b01b26 AP_HAL_Linux: removed unusued AP_Common/Semaphore.h 2019-05-15 15:33:48 +10:00
Andrew Tridgell
d368d95aa7 HAL_ChibiOS: removed unusued AP_Common/Semaphore.h 2019-05-15 15:33:48 +10:00
Andrew Tridgell
9f5a598697 AP_GPS: removed unusued AP_Common/Semaphore.h 2019-05-15 15:33:48 +10:00
Andrew Tridgell
9e7929adf6 AP_Compass: removed unusued AP_Common/Semaphore.h 2019-05-15 15:33:48 +10:00
Andrew Tridgell
71e91c953a AP_BattMonitor: removed unusued AP_Common/Semaphore.h 2019-05-15 15:33:48 +10:00
Andrew Tridgell
097519926d AP_Baro: removed unusued AP_Common/Semaphore.h 2019-05-15 15:33:48 +10:00
Andrew Tridgell
f8741f2e2a AP_Avoidance: removed unusued AP_Common/Semaphore.h 2019-05-15 15:33:48 +10:00
Andrew Tridgell
03fb0b803b AP_Airspeed: removed unusued AP_Common/Semaphore.h 2019-05-15 15:33:48 +10:00