aepko/Ardupilot2
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
50,681 Commits 72 Branches 509 Tags 683 MiB
6a13613a0f
Commit Graph

27994 Commits

Author SHA1 Message Date
Peter Barker
6a13613a0f AP_BoardConfig: correct va_list memory over-read error 
A va_list can only be used once - so take a copy each time we want to
use it
 2021-11-23 11:46:09 +11:00
Iampete1
467caa5259 RC_Channel: remove landinggear switch message 2021-11-23 11:40:44 +11:00
Iampete1
b818401563 AP_LandingGear: add enable param 2021-11-23 11:40:44 +11:00
Peter Barker
bd33267fd3 AP_Logger: do not use dataflash on SITL 2021-11-23 11:24:46 +11:00
Peter Barker
ea03d4e44b AP_Logger: eliminate HAL_LOGGING_DATAFLASH 
This define didn't add anything over HAL_LOGGING_DATAFLASH_ENABLED - and
predates it.
 2021-11-23 11:24:46 +11:00
Peter Barker
9a2d9898ba AP_HAL_ChibiOS: eliminate HAL_LOGGING_DATAFLASH 
This define didn't add anything over HAL_LOGGING_DATAFLASH_ENABLED - and
predates it.
 2021-11-23 11:24:46 +11:00
Tom Pittenger
684ad39a02 AP_Mission: PLANE to refuse NAV_SPLINE_WAYPOINT missions items 2021-11-23 11:23:02 +11:00
Randy Mackay
7cd767fe6d AR_WPNav: improve pivot turn accuracy to 5deg (was 10) 2021-11-23 11:18:15 +11:00
Samuel Tabor
27078bccda AP_TECS: Log input height demands. 2021-11-23 11:15:50 +11:00
Peter Barker
494dcc6ba3 SITL: make SITL::ADSB a SITL::SerialDevice 2021-11-23 11:09:29 +11:00
Peter Barker
cdccc67fb8 AP_HAL_SITL: make SITL::ADSB a SITL::SerialDevice 2021-11-23 11:09:29 +11:00
Tom Pittenger
659c35d1a9 SITL: expire stationary sim_adsb targets after an hour 2021-11-23 09:16:04 +11:00
Tom Pittenger
ec5820044b AP_Math: add defines for AP_SEC_PER_HOUR and AP_MSEC_PER_HOUR 2021-11-23 09:16:04 +11:00
Andrew Tridgell
6b249aefbc AP_DAL: support 9 uarts 2021-11-22 22:48:59 +11:00
Andrew Tridgell
0b567e95dc hwdef: added OTG2 for MatekF765-SE 2021-11-22 22:48:59 +11:00
Andrew Tridgell
1815ed32e9 AP_SerialManager: support up to 9 UARTs 2021-11-22 22:48:59 +11:00
Andrew Tridgell
3b3abdeef0 AP_HAL_SITL: support up to 9 UARTs 2021-11-22 22:48:59 +11:00
Andrew Tridgell
018ac68061 AP_HAL_Linux: support up to 9 UARTs 2021-11-22 22:48:59 +11:00
Andrew Tridgell
8c2074907b AP_HAL: support up to 9 UARTs 2021-11-22 22:48:59 +11:00
Andrew Tridgell
ccf89c2031 AP_HAL_ESP32: support up to 9 UARTs 2021-11-22 22:48:59 +11:00
Andrew Tridgell
e2618bdc06 AP_HAL_Empty: support up to 9 UARTs 2021-11-22 22:48:59 +11:00
Andrew Tridgell
fc6a82de1b AP_HAL_ChibiOS: support up to 9 UARTs 2021-11-22 22:48:59 +11:00
Peter Barker
bcee8b56ee AP_Param: simplify set_defaults_from_table error path 2021-11-22 22:43:02 +11:00
李孟晓
dfe2ade495 CUAV-X7: Add servo voltage detection pin 2021-11-22 16:39:15 +11:00
Andrew Tridgell
a78200fa24 RC_Channel: added parachute for plane 2021-11-22 13:22:54 +11:00
Hwurzburg
1162d556c6 RC_Channel: fix flare rc switch action with flight option bit 10 active 2021-11-21 21:00:04 +11:00
Peter Barker
e7f1a273e5 AP_HAL_ChibiOS: remove unused pin-related defines 
Unused
 2021-11-20 11:08:48 +11:00
Hwurzburg
2f4bcfb21c AP_Motors: change H_COLL_HOVER to H_COL_HOVER for consistency 2021-11-18 14:37:05 -05:00
Peter Barker
409147a291 AP_RCProtocol: add support for DJI Fast SBUS 
It's just SBUS... but with increased opportunities for corruption
 2021-11-18 17:19:04 +11:00
Randy Mackay
0de96f3f4a AP_InertialSensor: vibe units m/s/s 
also specify no multiplier
 2021-11-18 13:23:06 +09:00
Andrew Tridgell
bee44b03b0 AP_Notify: make the buzzer pin configurable on all boards 
this allows any board to setup a buzzer pin on any available
GPIO. Previously the pin if set in hwdef.dat was not configurable
 2021-11-18 15:22:03 +11:00
Andrew Tridgell
c5ff9ac23f AP_Parachute: added arming check for chute released 2021-11-18 15:21:15 +11:00
Wynn, Jesse Stewart
a7321cbae1 AP_RangeFinder_LightWareSerial: check dist for lost signal flags 
consider messages valid only if they are non-negative AND if the value is not a known lost-signal reading
 2021-11-18 12:06:57 +11:00
Andy Piper
77acf9bcc2 AP_Vehicle: correct update_dynamic_notch_at_specified_rate() 2021-11-17 13:35:34 +00:00
Andy Piper
ac263e5659 AP_Vehicle: make sure notch update rate is configurable 2021-11-17 13:35:34 +00:00
Andrew Tridgell
fbeaa3be6b hwdef: change MatekH743 to -Os 
leave space for more features
 2021-11-17 19:39:26 +11:00
Randy Mackay
e85a95f21c AR_AttitudeControl: reduce some param defaults 
These reductions are based on experirence helping users setup new vehicle.  In the vast majority of cases the existing values are too high

STEER_ANG_P is the default for the angle-to-rate controller and is used during pivot turns.  This value may still be slightly too high.
STEER_RATE_MAX is the maximum turn rate so the new value allows a 360 turn in 3 seconds
STEER_ACCEL_MAX is the acceleration for the turn rate meaning a vehicle can get to 120 deg/sec in 1 sec
THR_ACCEL_MAX is the maximum acceleration.  This new value means a vehicle can accelerate to 1m/s in 1 second.
 2021-11-17 19:18:23 +11:00
Randy Mackay
9c54b3d252 AR_AttitudeControl: move param defines from .h to .cpp 2021-11-17 19:18:23 +11:00
Iampete1
7b0f059968 AP_Logger: file content: log only file name if directory won't fit 2021-11-17 19:16:46 +11:00
Iampete1
09dfcdb574 AP_Logger: add scripting log structures 2021-11-17 19:16:46 +11:00
Iampete1
58ef0d0137 AP_Scripting: log files and runtime stats 2021-11-17 19:16:46 +11:00
Iampete1
f32f14b19c AP_Logger: log_file_content: copy filename 2021-11-17 19:16:46 +11:00
Iampete1
817864ce74 AP_Scripting: convert DEBUG_LVL to DEBUG_OPTS bitmask 2021-11-17 19:16:46 +11:00
Andrew Tridgell
42412b2a60 AP_BattMonitor: added VLT_OFFSET for analog 
useful for diode bias in voltage monitors

thanks to Charles from ASW and Jeff Wurzbach
 2021-11-17 19:09:40 +11:00
Peter Barker
c559e27c55 AP_Vehicle: allow specification of Scheduler table priorities 2021-11-17 19:00:04 +11:00
Peter Barker
e1310b2082 AP_Scheduler: allow specification of Scheduler table priorities 2021-11-17 19:00:04 +11:00
Peter Barker
1835a63bfb AP_Camera: don't use stale image number in CAMERA_FEEDBACK 2021-11-17 18:48:00 +11:00
Peter Barker
8f1c255693 AP_Camera: stash information required for camera_feedback message 
This means the data sent in the mavlink message is closer to the
information when the picture was taken, rather than when we decide we
have the space to send the mavlink message.  When we process the
deferred request to send the camera feedback message is up to the
vagaries of mavlink scheduling, so the data can become quite out-of-date
 2021-11-17 18:48:00 +11:00
Peter Barker
411ed0f50e AP_RCProtocol: use data structure for serial configurations 2021-11-16 22:06:24 +11:00
Peter Barker
c1cdfb448c AP_RCProtocol: move uart flow control set out of CRSF code 
11:32 AM] AndrewTridgell: @Peter Barker we should disable flow control when we first add the uart - none of the RC protocols use flow control
[11:32 AM] AndrewTridgell: the blocking writes call isn't needed
[11:32 AM] Peter Barker: Thanks, I'll make a patch.
 2021-11-16 22:06:24 +11:00