aepko/Ardupilot2
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
53,173 Commits 72 Branches 509 Tags 683 MiB
48b3549158
Commit Graph

29597 Commits

Author SHA1 Message Date
Iampete1
48b3549158 AP_Logger: RCOUT only log if there is a valid output channel 2022-05-22 12:07:37 +10:00
Iampete1
d1e02e4fdd SRV_Channel: add invalid mask for GPIO outputs 2022-05-22 12:07:37 +10:00
Iampete1
a36848cba5 SITL: JSON Master: only copy the first 16 servos 2022-05-22 12:07:37 +10:00
Iampete1
e03aed3aa7 AP_BLHeli: support upto 32 servo outputs 2022-05-22 12:07:37 +10:00
Iampete1
117b67c9e2 AR_MotorsUGV: convert to 32 bit motor mask 2022-05-22 12:07:37 +10:00
Iampete1
43832649ec AP_Motors: convert to 32 bit motor mask 2022-05-22 12:07:37 +10:00
Iampete1
7d3368fa33 GCS_MAVLink: send servo raw 17-32 using port 1 2022-05-22 12:07:37 +10:00
Iampete1
077401df69 SRV_Channel: add upto 32 servo outs 2022-05-22 12:07:37 +10:00
Iampete1
c4df741af9 AP_SerialLED: enable 32 servo outs 2022-05-22 12:07:37 +10:00
Iampete1
031115577a AP_HAL_SITL: enable 32 servo outs 2022-05-22 12:07:37 +10:00
Iampete1
7fc691d8d5 AP_HAL_ChibiOS: enable 32 servo outs 2022-05-22 12:07:37 +10:00
Iampete1
cabdd82e71 AP_HAL: enable 32 servo outs 2022-05-22 12:07:37 +10:00
Iampete1
572ebf29da SITL: move to 32 servo outs 2022-05-22 12:07:37 +10:00
Iampete1
6921763b02 AP_Voltz: update MASK Bitmask 2022-05-22 12:07:37 +10:00
Iampete1
d1e45c93d6 AP_UAVCAN: update ESC_BM and SRV_BM Bitmask 2022-05-22 12:07:37 +10:00
Iampete1
51a631b523 AP_PiccoloCAN: update ESC_BM Bitmask 2022-05-22 12:07:37 +10:00
Iampete1
8110b9ac2d AP_Logger: add loging of servo out 15 to 32 2022-05-22 12:07:37 +10:00
Andrew Tridgell
bda280bcf1 AP_Scripting: cope better with high P gains in quicktune 
if we lower the D gain, then lower P and I by the same ratio before we
start on the P gain

Also added parameters to disable filter changes and control PI ratios
 2022-05-21 13:20:27 +10:00
Tom Pittenger
798f985ee5 AP_InertialSensor: relax is_still() threshold for SITL.. which is pretty darn still all the time for Plane 2022-05-20 10:52:47 -07:00
Randy Mackay
2382e58f04 AP_InertialSensor: extend ENABLE_MASK param desc IMUs 4 to 7 2022-05-19 07:54:24 +10:00
Clyde McQueen
25fd69b947 AP_HAL_SITL: init ArduSub pwm_output to [1500, ...] 
Signed-off-by: Clyde McQueen <clyde@mcqueen.net>
 2022-05-19 07:53:52 +10:00
Andrew Tridgell
8106291bfe AP_UAVCAN: added CAN_Dx_UC_ESC_OF parameter 
this allows for an offset in ESC numbering for much more efficient CAN
bandwidth usage.

For example, on a coaxial OctoQuad quadplane the ESCs are typically
setup as outputs 5 to 12. An ideal setup is to split these over 2 CAN
buses, with one CAN bus for the top layer and the one bus for the
bottom layer (allowing for VTOL flight with one bus failed).

Without this offset parameter you would be sending RawCommand messages
like this:

bus1: [ 0, 0, 0, 0, ESC1, ESC2, ESC3, ESC4 ]
bus2: [ 0, 0, 0, 0, 0, 0, 0, 0, ESC1, ESC2, ESC3, ESC4 ]

this is very wasteful of bus bandwidth, with bus1 using 3x the
bandwidth it should and bus2 using 4x the bandwidth it should (the
above will take 3 can frames for bus1, and 4 can frames for bus 2)

With this patch you can set:

CAN_D1_UC_ESC_OF = 4
CAN_D2_UC_ESC_OF = 8

and you will get this on the bus:

bus1: [ ESC1, ESC2, ESC3, ESC4 ]
bus2: [ ESC1, ESC2, ESC3, ESC4 ]

that takes just 1 can frame per send on each bus
 2022-05-18 21:23:30 +10:00
Randy Mackay
e0023a99bc AP_NavEKF3: replace AP_HAL::millis() with dal.millis() 2022-05-18 17:59:57 +10:00
Peter Barker
434f49e6b6 AP_Motors: correct initialised_ok state for HeliDual+Quad 
initialised_ok was being set to false when frame/class was set as the
method was not overridden and thus Heli's set_frame_and_class was
setting initialised_ok to false.  When the init_output method was called
it would be unconditionally reset to true.
 2022-05-18 12:25:26 +09:00
Peter Barker
8402149572 AP_Vehicle: run prearm checks on all vehicles @1Hz, displaying @0.0333Hz 2022-05-18 12:25:26 +09:00
Peter Barker
53e8ab6af8 AP_Arming: run prearm checks on all vehicles @1Hz, displaying @0.0333Hz 2022-05-18 12:25:26 +09:00
Iampete1
af58ca52c1 AP_HAL_ChibiOS: allocate_heap_memory use single malloc 2022-05-18 08:20:32 +10:00
Iampete1
66cdfb015b AP_Scripting: always free the heap and remove scripts 2022-05-18 08:20:32 +10:00
Andrew Tridgell
f683461e8c AP_Mission: allow NAV_VTOL_TAKEOFF in is_takoff_next() 2022-05-18 06:43:16 +10:00
Andrew Tridgell
f39ffee3f9 AP_Vehicle: added QLAND_INSTEAD_OF_RTL mode reason 2022-05-18 06:43:16 +10:00
Andrew Tridgell
457568d3c5 SITL: removed SIM_WIND_DELAY 2022-05-17 19:34:32 +10:00
Andrew Tridgell
962d92acf5 AP_HAL: use array for airspeed pin value 2022-05-17 19:34:32 +10:00
Andrew Tridgell
7dc5da1247 HAL_SITL: cleanup SITL airspeed handling 
fixed handling of EAS2TAS, and fixed ratio per sensor.

Removed the wind delay code (which was never being used). We should
add a generic delay filter if we need this again
 2022-05-17 19:34:32 +10:00
Andrew Tridgell
2dea725d80 SITL: fixed up airspeed parameters 
use a separate airspeed structure and separate ratio per sensor
 2022-05-17 19:34:32 +10:00
Andrew Tridgell
61a27698da AP_Airspeed: fixed airspeed cal on 2nd airspeed sensor 
we need to use the pressure from the sensor we are calibrating
 2022-05-17 19:34:32 +10:00
Andrew Tridgell
234abece59 AP_EFI: added fuel usage integration for Lutan EFI 
allows for EFI_COEF1 and EFI_COEF2 to be set to get fuel consumption
on GCS
 2022-05-17 10:35:24 +10:00
Peter Barker
3cb104f537 AP_Logger: log airspeed primary changes 2022-05-17 10:27:57 +10:00
Peter Barker
19190fb134 AP_Airspeed: log airspeed primary changes 2022-05-17 10:27:57 +10:00
Peter Barker
016c9d8239 AP_OSD: correct compilation without OSD_ENABLED 
The max7456 header file is guarded by his macro
 2022-05-17 10:26:50 +10:00
Joshua Henderson
d002fde67e AP_Param: eedump_apparam fix accessing uninit var 2022-05-17 10:26:18 +10:00
murata
d2053d4449 AP_Vehicle: Console output can be disabled 2022-05-17 09:53:06 +10:00
murata
0245d0bae1 AP_SerialManager: Console output can be disabled 2022-05-17 09:53:06 +10:00
murata
6e91b364e0 AP_Scripting: Console output can be disabled 2022-05-17 09:53:06 +10:00
murata
16d7f69949 AP_Scheduler: Console output can be disabled 2022-05-17 09:53:06 +10:00
murata
46f75e7e53 AP_RobotisServo: Console output can be disabled 2022-05-17 09:53:06 +10:00
murata
272230793d AP_RAMTRON: Console output can be disabled 2022-05-17 09:53:06 +10:00
murata
cc75b931f9 AP_Radio: Console output can be disabled 2022-05-17 09:53:06 +10:00
murata
261d97062c AP_Param: Console output can be disabled 2022-05-17 09:53:06 +10:00
murata
cd9b4b48ae AP_OSD: Console output can be disabled 2022-05-17 09:53:06 +10:00
murata
c143fb0a5a AP_NavEKF2: Console output can be disabled 2022-05-17 09:53:06 +10:00