aepko/Ardupilot2
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
13,427 Commits 72 Branches 509 Tags 683 MiB
1c11a91ec2
Commit Graph

3381 Commits

Author SHA1 Message Date
Randy Mackay
1c11a91ec2 Copter: rename land_maybe_complete function 2014-09-19 16:43:17 +09:00
Randy Mackay
b9977a1115 Copter: add land_complete_maybe flag 2014-09-19 16:43:15 +09:00
Randy Mackay
6951a20fb0 Copter: soften loiter target when maybe landed 
Applies to auto's land, land, loiter, pos hold and rtl flight modes
 2014-09-19 16:43:12 +09:00
Randy Mackay
b552479e31 Copter: typo fix for baro vs inav alt disparity definition 2014-09-18 17:32:03 +09:00
Randy Mackay
18e3db0011 Copter: define limit for baro vs inav alt disparity 2014-09-18 17:24:40 +09:00
Andre Kjellstrup
b4c6d6395e Copter: reset battery_fs after dis/rearming 2014-09-18 11:17:03 +09:00
Randy Mackay
2efeb768e0 Copter: allow GCS to turn safety switch on/off 2014-09-17 21:51:25 +09:00
Randy Mackay
9bcf9a31ed Copter: set sys_status motor outputs bit from safety switch 2014-09-17 21:51:23 +09:00
Randy Mackay
9f3803052f Copter: add support for DO_PARACHUTE from GCS 
Mission command support was already included but this adds support for
DO_PARACHUTE received as a COMMAND_LONG message which are sent from the
GCS when the command should be executed immediately
 2014-09-17 21:14:26 +09:00
Randy Mackay
adf00a207b Copter: enable EPM by default on Pixhawk 2014-09-17 21:14:22 +09:00
Randy Mackay
bbe4438a6b Copter: add support for DO_GRIPPER command 2014-09-17 21:14:19 +09:00
Randy Mackay
3fa3cb6d65 Copter: remove EPM neutral from ch7/ch8 switch 
The EPM library returns the pwm output sent to the EPM to the neutral
position automatically meaning an explicit ch7/ch8 setting is not
required
 2014-09-17 21:13:45 +09:00
Randy Mackay
14d80910ec Copter: integrate EPM ver2 2014-09-17 21:13:35 +09:00
Jonathan Challinger
8ca4795ffb Copter: Log NTUN while in LAND mode with GPS 2014-09-16 10:19:33 +09:00
Randy Mackay
345d4353e5 Copter: adjust EKF_CHECK parameter description 
Default has been changed to 0.8 for -rc9 so we need to update the
description values so they match
 2014-09-12 21:28:41 +09:00
Randy Mackay
d15a5f9dcb Copter: THR_ACCEL_IMAX default to 800 2014-09-12 15:11:48 +09:00
Randy Mackay
224122958c Copter: reduce throttle to min once landed in RTL 
This catches the case where the vehicle lands but the user doesn't
immediately put the throttle to zero.  Before this check it would
continue to attempt to hold it's
 2014-09-12 14:16:05 +09:00
Randy Mackay
eac26cdd0f Copter: THR_ACCEL_IMAX param range increased 2014-09-12 14:16:04 +09:00
Randy Mackay
a12d9109e0 Copter: remove thr check during init_arm_motors 
This check is redundant now that we have a check within the arm_check()
function.
Removing this check does raise a slight danger that someone could raise
the throttle after arming but before the gyro and baro calibration has
completed but the delay has been greatly shortened from what it once was
so there is much less danger that someone could approach the vehicle
during the short arming delay.
 2014-09-11 21:13:35 +09:00
Randy Mackay
5720bff29f Copter: AC3.2-rc9 release notes 2014-09-11 20:38:56 +09:00
Randy Mackay
906b3dfbec Copter: AC3.2-rc8 release notes 2014-09-11 16:54:04 +09:00
Randy Mackay
4c6b0bb1cb Copter: format change to flight mode default defined 
This also kicks off the build for AC3.2-rc8
 2014-09-11 16:52:36 +09:00
Randy Mackay
48bc1456d0 Copter: increase Rate PID param ranges 
RATE_RLL_P to 0.25 (was 0.20)
RATE_PIT_P to 0.25 (was 0.20)
RATE_YAW_P to 0.50 (was 0.25)
RATE_YAW_I to 0.05 (was 0.02)
 2014-09-10 16:40:36 +09:00
Craig Elder
ea82caf7a4 Copter: Parameters.pde 
Corrected typo in parameter description
 2014-09-09 12:34:59 -07:00
Randy Mackay
0d7a999fc1 Copter: arming check that throttle is low 2014-09-09 23:02:18 +09:00
Randy Mackay
294f836c8c Copter: never send unhealthy terrain status 
Copter does not yet rely on the terrain data (it's for informational
purposes only) so we will temporarily disable the failure flags to the
GCS to avoid support calls
 2014-09-09 22:19:20 +09:00
Randy Mackay
bf18fb896a Copter: send extended status to GCS only after initialisation 2014-09-09 22:17:46 +09:00
Randy Mackay
21d56735ca Copter: increase EKF_CHECK_THRESH default to 0.8 
Also remove unused #define related to inertial nav check (now removed)
 2014-09-09 14:59:27 +09:00
Randy Mackay
9c613cd1ec Copter: reduce alt hold defaults 
Throttle Rate P to 5.0 (was 6.0)
Throttle Accel P to 0.5 (was 0.75)
Throttle Accel I to 1.0 (was 1.5)
 2014-09-07 22:14:40 +09:00
Randy Mackay
db12df2237 Copter: minor ReleaseNotes format change 
This also helps to kick off the build of AC3.2-rc7
 2014-09-04 16:19:02 +09:00
Randy Mackay
05233fbf02 Cotper: AC3.2-rc7 release notes 2014-09-04 15:41:10 +09:00
Randy Mackay
641c8317a5 Copter: pre-arm consistency check of gyros 2014-09-04 15:21:58 +09:00
Randy Mackay
28f31166b9 Copter: land check gets overall throttle and rotation rate check 
add check that overall throttle level is below the non-takeoff throttle
instead of just checking that it's motors have hit their lower limits
because low limits can also be caused by high yaw rotation requests.
Absolute climb rate requirement reduced to 30cm/s
 2014-09-04 15:21:51 +09:00
Randy Mackay
05a37dd54d Copter: add short delay to arming to allow RC input 
The short delay gives time for the RC inputs to be processed which
removes the chance of a false-positive on the "late frame" radio check.
A false positive could lead to an immediate disarm right after arming.
 2014-09-04 15:11:57 +09:00
Randy Mackay
59404c25e3 Copter: pre-arm consistency check of accels 2014-09-03 13:51:44 +09:00
Randy Mackay
4a06941a39 Copter: individual accel and gyro status to GCS 2014-09-03 11:22:51 +09:00
Randy Mackay
d7343d5dc7 Copter: check all gyros and accels in pre-arm check 2014-09-03 11:22:49 +09:00
Randy Mackay
818b3b74f6 Copter: sanity check throttle deadzone 2014-09-02 12:40:15 +09:00
Jason Short
82481f30a3 Copter: move drift thr assist to separate function 
no changes in functionality.
 2014-08-31 14:22:56 +09:00
Randy Mackay
48d143d4ef Copter: minor format change to release notes 
This also helps kick off the rebuild so AC3.2-rc6 appears in the mission
planner
 2014-08-31 12:29:37 +09:00
Randy Mackay
ebfd828087 Copter: update AC3.2-rc6 release notes 
forgot compass-not-calibrated bug fix
 2014-08-31 12:06:03 +09:00
Randy Mackay
d04a4834fa Copter: update AC3.2-rc6 release notes 
Forgot to add GPS driver buffer overflow item
 2014-08-31 12:02:00 +09:00
Randy Mackay
13f994d3ad Copter: AC3.2-rc6 release notes 2014-08-31 11:55:06 +09:00
Randy Mackay
07420521ab Copter: default LAND_REPOSITION to 1 2014-08-31 10:44:09 +09:00
Jason Short
0dd9797fe6 Copter: restore CLI set parameter feature 
Added back the ability to set params from CLI
 2014-08-31 10:36:42 +09:00
Randy Mackay
cf98cc29b5 Copter: throttle deadzone parameter 
Allows increasing or decreasing the deadband size in AltHold, Loiter,
PosHold flight modes
 2014-08-29 15:54:34 +09:00
Randy Mackay
eb51a8e5da Copter: pre-arm check of internal vs ext compass 2014-08-26 22:34:06 +09:00
Randy Mackay
2b0a7c59bc Copter: remote arming check reference to compass learning 2014-08-26 22:34:04 +09:00
Randy Mackay
63d0cddfa4 Copter: make landing detector more strict 
Made more strict by requiring 50 consecutive iterations where the climb
rate is below +- 40cm/s.  Previously it was 50 cumulative.

Removed check of failsafe.radio when clearing the land flag because it
could result in the vehicle taking off if the user picked it up.
 2014-08-25 21:12:05 +09:00
Randy Mackay
65ed77e803 Copter: ensure motors don't stop during flip 2014-08-23 23:40:13 +09:00