aepko/Ardupilot2
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
22,957 Commits 72 Branches 509 Tags 683 MiB
1400dc9d02
Commit Graph

11730 Commits

Author SHA1 Message Date
Paul Riseborough
1400dc9d02 AP_NavEKF2: Add tuning parameters for magentic yaw fusion 
Enable simple magnetic yaw fusion observation noise and innovation consistency check gate width to be tuned independantly.
 2016-06-28 14:20:12 +10:00
Paul Riseborough
dc6836988c AP_NavEKF2: Improve ground based magnetic anomaly protection for copter 
The toilet bowling check during early flight has been removed. This check caused problems where bad compass calibration was the cause of the toilet bowling and resetting to the compass was a bad option. The handling of simultaneous failed mag and velocity innovations is already handled outside the EKF by the failsafe.
A check for yaw errors due to a ground based magnetic anomaly has been introduced.
The logic for in-flight yaw and magnetic field resets has been cleaned up and variable names improved.
 2016-06-28 14:20:12 +10:00
Paul Riseborough
703f56908f AP_NavEKF2: Correct comment 2016-06-28 14:20:12 +10:00
Paul Riseborough
26815ace7a AP_NavEKF2: Remove redundant logic check 2016-06-28 14:20:12 +10:00
Jonathan Challinger
bd8c804ab5 AP_NavEKF2: correct comments 2016-06-28 14:20:12 +10:00
Jonathan Challinger
ebae95d7f6 AP_NavEKF2: apply corrections to new inertial data when using for output prediction 2016-06-28 14:20:11 +10:00
Jonathan Challinger
2f709dfe86 AP_NavEKF2: improve inertial prediction 2016-06-28 14:20:11 +10:00
Paul Riseborough
262c5fe56d AP_NavEKF2: Make setter loop through all instances 
For setters where a success boolean is returned, return false if any instance fails.
 2016-06-28 14:20:11 +10:00
Jonathan Challinger
8baf064317 AP_NavEKF2: setTakeoffExpected and setTouchdownExpected loop through instances 2016-06-28 14:20:11 +10:00
Paul Riseborough
ec5c460584 AP_NavEKF2: Fix predicted nav reporting 
Predicted nav should never be false if current nav is true
 2016-06-28 14:20:11 +10:00
Jonathan Challinger
99f481e098 AP_NavEKF2: always calcGpsGoodForFlight 2016-06-28 14:20:11 +10:00
Jonathan Challinger
3382e09580 AP_NavEKF2: add height constraint during takeoff 2016-06-28 14:20:11 +10:00
Paul Riseborough
4bb46af861 AP_NavEKF2: Increase allowable gyro bias offset 2016-06-28 14:20:10 +10:00
Andrew Tridgell
af23a681e0 AP_BoardConfig: improved docs for BRD_SAFETYENABLE 2016-06-28 09:58:55 +10:00
Lucas De Marchi
1f96336f7c Global: rename bus type enum entries 2016-06-27 17:51:41 -03:00
Gustavo Jose de Sousa
f6bebc96c0 AP_InertialSensor: INS_generic: remove unused includes 2016-06-27 17:22:43 -03:00
Gustavo Jose de Sousa
e85ac8b2c5 AP_InertialSensor: inform maximum gyro average difference 
While at it, define GYRO_INIT_MAX_DIFF_DPS.
 2016-06-27 17:22:43 -03:00
Gustavo Jose de Sousa
e6f62080f5 AP_InertialSensor: fix best_diff on gyro initialization 
Without this patch, if accel_diff.length() > 0.2f and j == 0, then
best_diff[k] would be zero forever since diff_norm[k] >= 0 for any j.
 2016-06-27 17:20:51 -03:00
Gustavo Jose de Sousa
de94392759 AP_InertialSensor: MPU9250: remove _bus_type field 
Use _dev->bus_type instead.
 2016-06-27 17:20:51 -03:00
Gustavo Jose de Sousa
83feb2e2ae AP_InertialSensor: MPU9250: let Device handle read flag 
There's no need to handle that in MPU9250 anymore.
 2016-06-27 17:20:51 -03:00
Gustavo Jose de Sousa
1e99a7125c AP_InertialSensor: MPU9250: remove _register_write_check() 
That function isn't used in the code base and there should be a better way to
debug writes on registers.
 2016-06-27 17:20:51 -03:00
Gustavo Jose de Sousa
a6e5eb9e14 AP_InertialSensor: MPU6000: remove _bus_type field 
Use _dev->bus_type instead.
 2016-06-27 17:20:51 -03:00
Gustavo Jose de Sousa
0718649c8b AP_InertialSensor: MPU6000: let Device handle read flag 
There's no need to handle that in MPU6000 anymore.
 2016-06-27 17:20:51 -03:00
Gustavo Jose de Sousa
309fe4a88c AP_InertialSensor: MPU6000: remove _register_write_check() 
That function isn't used in the code base and there should be a better way to
debug writes on registers.
 2016-06-27 17:20:51 -03:00
Gustavo Jose de Sousa
d35cf60ce1 AP_HAL_Linux: I2CDevice: use read flag in read_registers_multiple 
Use the generic support in Device interface for read flag when we are
using read_registers_multiple() method.
 2016-06-27 17:20:46 -03:00
Gustavo Jose de Sousa
66f1ad9ed0 AP_HAL: Device: add support for read flag 
Many of our SPI and I2C sensors define the protocol of setting the most
significant bit of the register address in order to perform a read operation.
Thus, enable the use of a "read flag" that is ORed with the register's address.
Since this is an abstraction for general devices, it's a good idea to have zero
as the default value for that flag.

While at it, add documentation to read_registers().
 2016-06-27 17:18:35 -03:00
Gustavo Jose de Sousa
b6a1d598e3 AP_HAL: Device: document write_register() 2016-06-27 17:18:35 -03:00
Gustavo Jose de Sousa
4693501d9d AP_HAL: Device: add bus_type field 
Sometimes it's necessary to know the type of bus to make some decisions where
AP_HAL::Device abstraction is used.
 2016-06-27 17:18:35 -03:00
Michael du Breuil
c2da36d505 GCS_MAVLink: fix race condition when recieving last waypoint 
only shows up when the waypoint is about to time out
 2016-06-27 10:57:14 +10:00
Andrew Tridgell
689595080a AP_Airspeed: ensure we have at least 10 samples for airspeed cal 
thanks to Michael for pointing out this issue
 2016-06-27 10:52:59 +10:00
Tom Pittenger
37f990bfad AP_ADSB: allow param based VEHICLE list sizes, 1 to 100. 2016-06-26 11:03:33 -07:00
Lucas De Marchi
b70b9ed8d1 AP_HAL_Linux: fix warning on 64b printf 
../../libraries/AP_HAL_Linux/Perf.cpp: In member function ‘void Linux::Perf::_debug_counters()’:
../../libraries/AP_HAL_Linux/Perf.cpp:85:36: warning: format ‘%llu’ expects argument of type ‘long long unsigned int’, but argument 4 has type ‘uint64_t {aka long unsigned int}’ [-Wformat=]
                     c.name, c.count);
                                    ^
 2016-06-25 12:05:55 -03:00
Daniel Ricketts
865aad7598 AC_Avoid: add support for stopping at polygon fence 2016-06-25 15:55:55 +09:00
Randy Mackay
26a6234a29 AC_Avoid: do not attempt to stop at circular fence if already breached 2016-06-25 15:55:55 +09:00
Randy Mackay
c6f9889a25 AC_Avoid: constify get_max_speed 
Also get_stopping_distance and get_margin
 2016-06-25 15:55:55 +09:00
Randy Mackay
5153c3d195 AC_Fence: merge with add polygon support 2016-06-25 15:55:55 +09:00
Randy Mackay
d91805edbf AC_Fence: add support for polygon fences 2016-06-25 15:55:55 +09:00
Randy Mackay
f0bb1ac1d2 AC_Fence: AC_Polygon_loader loads points from eeprom 
Thanks to Peter Barker for his work to library-ify Plane's geofence which was the basis for this work.
 2016-06-25 15:55:55 +09:00
Daniel Ricketts
249d95b413 AP_Math: add Polygon_outside and Polygon_complete functions 2016-06-25 15:55:55 +09:00
Leonard Hall
80bda572ba AC_AttutudeControl: Yaw shift fix 2016-06-24 18:15:48 +09:00
Leonard Hall
a5bb3c206e Dataflash: Log rate to degrees 2016-06-24 17:17:16 +09:00
Leonard Hall
8737f6b62d AC_AttitudeControl: enhanced quaternion attitude controller 2016-06-24 17:17:11 +09:00
Leonard Hall
117ae89505 AC_AttitudeControl: increase SLEW_YAW default to 60deg/sec 2016-06-24 16:24:17 +09:00
Leonard Hall
e0eecd56b2 AP_Math: use is_zero and float constants 2016-06-24 16:16:34 +09:00
Leonard Hall
7f933140c7 AP_Math: small formatting fix to quaternion rotation_matrix 
No functional change
 2016-06-24 16:16:33 +09:00
Leonard Hall
8afd29cc85 AP_Math: add quaternion::rotation_matrix_norm 2016-06-24 16:16:28 +09:00
Randy Mackay
a1548405c1 AC_AttitudeControlHeli: fix althold lean angle max 2016-06-24 15:03:59 +09:00
Andrew Tridgell
1f29b51dd6 AP_Vehicle: moved roll_limit_cd into AP_Vehicle 
will be used by APM_Control
 2016-06-24 11:39:21 +10:00
Andrew Tridgell
8a03b3ba22 APM_Control: reduce elevator when past LIM_ROLL_CD 
this reduces elevator control when rolled over hard in fixed
wing. Using the elevator when on the side just caused earth frame yaw
and is counter productive. It can also prevent some aircraft from
recovering from inverted flight.
 2016-06-24 11:28:18 +10:00
Andrew Tridgell
a6e927d434 SITL: default gyro cal off in XPlane and FlightAxis 
pointless doing cal on these backends
 2016-06-24 10:32:52 +10:00