Copter: update firmware version to AC3.1-rc3
This commit is contained in:
parent
450323f4ae
commit
fc47e05105
@ -1,6 +1,6 @@
|
||||
/// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
|
||||
|
||||
#define THISFIRMWARE "ArduCopter V3.1-rc2"
|
||||
#define THISFIRMWARE "ArduCopter V3.1-rc3"
|
||||
/*
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
|
@ -1,9 +1,21 @@
|
||||
ArduCopter Release Notes:
|
||||
------------------------------------------------------------------
|
||||
ArduCopter 3.1-rc3 09-Oct-2013
|
||||
Improvements over 3.1-rc2
|
||||
1) GPS Glitch protection - gps positions are compared with the previous gps position. Position accepted if within 10m or copter could have reached the position with max accel of 10m/s/s.
|
||||
2) Bug fix for pixhawk SPI bus contention that could lead to corrupted accelerometer values on pixhawk resolved
|
||||
3) Auto Tuning (compile time option only add "#define AUTOTUNE ENABLED" to APM_Config.h and set CH7_Opt or CH8_Opt parameter to 17)
|
||||
4) CPU Performance improvement when reading from MPU6k for APM
|
||||
5) SUPER_SIMPLE parameter changed to a bit map to allow some flight modes to use super simpler while others use regular simple (MP release to allow easier selection will go out with AC3.1 official release)
|
||||
6) Safety changes:
|
||||
a) safety button must be pushed before arming on pixhawk
|
||||
b) RGB LED (aka toshiba led) changed so that disarmed flashes, armed is either blue (if no gps lock) or green (if gps lock)
|
||||
c) sensor health bitmask sent to groundstations
|
||||
------------------------------------------------------------------
|
||||
ArduCopter 3.1-rc2 18-Sep-2013
|
||||
Improvements over 3.1-rc1
|
||||
1) bug fix for MOT_SPIN_ARMED to allow it to be higher than 127
|
||||
2) PX4/pixhawks auto-detect internal/external compass so COMPASS_ORIENT should be set to ORIENTATION_NONE if using GPS+compass module
|
||||
2) PX4/pixhawk auto-detect internal/external compass so COMPASS_ORIENT should be set to ORIENTATION_NONE if using GPS+compass module
|
||||
------------------------------------------------------------------
|
||||
ArduCopter 3.1-rc1 9-Sep-2013
|
||||
Improvements over 3.0.1
|
||||
|
Loading…
Reference in New Issue
Block a user