aepko/Ardupilot2
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Plane: enable compass on all boards by default

Browse Source 
if not present, then mag init will fail and it will disable
This commit is contained in:
Andrew Tridgell 2013-05-02 15:01:33 +10:00
parent 0aa38a5bd4
commit 0d97f417ec
2 changed files with 2 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
ArduPlane/Parameters.pde
View File

@ -542,10 +542,10 @@ const AP_Param::Info var_info[] PROGMEM = {
// @Param: MAG_ENABLE
// @DisplayName: Enable Compass
// @Description: Setting this to Enabled(1) will enable the compass. Setting this to Disabled(0) will disable the compass
// @Description: Setting this to Enabled(1) will enable the compass. Setting this to Disabled(0) will disable the compass. Note that this is separate from COMPASS_USE. This will enable the low level senor, and will enable logging of magnetometer data. To use the compass for navigation you must also set COMPASS_USE to 1.
// @Values: 0:Disabled,1:Enabled
// @User: Standard
GSCALAR(compass_enabled, "MAG_ENABLE", MAGNETOMETER),
GSCALAR(compass_enabled, "MAG_ENABLE", 1),
GSCALAR(flap_1_percent, "FLAP_1_PERCNT", FLAP_1_PERCENT),
GSCALAR(flap_1_speed, "FLAP_1_SPEED", FLAP_1_SPEED),

9
ArduPlane/config.h
View File

@ -119,7 +119,6 @@
# define CONFIG_PITOT_SOURCE PITOT_SOURCE_ANALOG_PIN
# define CONFIG_PITOT_SOURCE_ANALOG_PIN 0
# define CONFIG_PITOT_SCALING 4.0
# define MAGNETOMETER ENABLED
# ifdef APM2_BETA_HARDWARE
# define CONFIG_BARO AP_BARO_BMP085
# else // APM2 Production Hardware (default)
@ -139,7 +138,6 @@
# define CONFIG_PITOT_SOURCE PITOT_SOURCE_ANALOG_PIN
# define CONFIG_PITOT_SOURCE_ANALOG_PIN 0
# define CONFIG_PITOT_SCALING 4.0
# define MAGNETOMETER ENABLED
# define CONFIG_BARO AP_BARO_HIL
# define CONFIG_COMPASS AP_COMPASS_HIL
#elif CONFIG_HAL_BOARD == HAL_BOARD_PX4
@ -155,7 +153,6 @@
# define CONFIG_PITOT_SOURCE PITOT_SOURCE_ANALOG_PIN
# define CONFIG_PITOT_SOURCE_ANALOG_PIN 11
# define CONFIG_PITOT_SCALING (4.0*5.0/3.3)
# define MAGNETOMETER ENABLED
# define CONFIG_BARO AP_BARO_PX4
# define CONFIG_COMPASS AP_COMPASS_PX4
# define SERIAL0_BAUD 115200
@ -264,12 +261,6 @@
# define INPUT_VOLTAGE 4.68 // 4.68 is the average value for a sample set. This is the value at the processor with 5.02 applied at the servo rail
#endif
//////////////////////////////////////////////////////////////////////////////
// MAGNETOMETER
#ifndef MAGNETOMETER
# define MAGNETOMETER DISABLED
#endif
//////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////
// RADIO CONFIGURATION