Copter: ReleaseNotes for AC3.2-rc13
This commit is contained in:
parent
8fc2ccdc76
commit
0532a4bbc3
@ -1,5 +1,21 @@
|
||||
ArduCopter Release Notes:
|
||||
------------------------------------------------------------------
|
||||
ArduCopter 3.2-rc13 23-Oct-2014
|
||||
Changes from 3.2-rc12
|
||||
1) DCM check triggers LAND if yaw disagrees with GPS by > 60deg (configure with DCM_CHECK_THRESH param) and in Loiter, PosHold, Auto, etc
|
||||
2) Safety features:
|
||||
a) landing detector checks baro climbrate between -1.5 ~ +1.5 m/s
|
||||
b) sanity check AHRS_RP_P and AHRS_YAW_P are never less than 0.05
|
||||
c) check set-mode requests from GCS are for this vehicle
|
||||
3) Bug fixes:
|
||||
a) fix ch6 tuning of wp-speed (was getting stuck at zero)
|
||||
b) parachute servo set to off position on startup
|
||||
c) Auto Takeoff timing bug fix that could cause severe lean on takeoff
|
||||
d) timer fix for "slow start" of motors on Pixhawk (timer was incorrectly based on 100hz APM2 main loop speed)
|
||||
4) reduced number of relays from 4 to 2 (saves memory and flash required on APM boards)
|
||||
5) reduced number of range finders from 2 to 1 (saves memory and flash on APM boards)
|
||||
6) allow logging from startup when LOG_BITMASK set to "All+DisarmedLogging"
|
||||
------------------------------------------------------------------
|
||||
ArduCopter 3.2-rc12 10-Oct-2014
|
||||
Changes from 3.2-rc11
|
||||
1) disable sonar on APM1 and TradHeli (APM1 & APM2) to allow code to fit
|
||||
|
Loading…
Reference in New Issue
Block a user