Spiri SDK - Simulated robot

The Spiri SDK consists of a number of components. What you're looking at right now is the drone simulation component, which is the core of the SDK.

Spiri Robots run a number of docker containers to achieve their core functionality, we try to keep these essential docker containers in one docker compose file. The docker compose file you'll find in this repository starts an ardupilot-based UAV simulation as well as a ROS master, and mavproxy to tie it together.

To get started you can simply clone this repository and run docker compose --profile uav-sim up.

Once the simulated UAV is running you can connect to it with QGroundControl or other MavLink compatible software. We expose the UAVs Mavlink conenction on tcp port 5760.

There is experimental GUI support you can enable by running docker compose --profile uav-sim --profile ui up.

Creating a new project

We provide project templates you can use for development that integrate seamlessly into our simulated robots.

These templates are intended to be used with VSCode.

To get started with our project templates install the copier project templating utility.

• template-service-ros1-catkin

This template uses the last stable release of ROS1 (ros noetic) and supports python and c++ programming languages.

ROS1 is considered end of life. It's recomended to use a ROS2 template instead

• ROS2 template

We're working on it...

NVIDIA Container Toolkit

Source

Installing with Apt

curl -fsSL https://nvidia.github.io/libnvidia-container/gpgkey | sudo gpg --dearmor -o /usr/share/keyrings/nvidia-container-toolkit-keyring.gpg \
  && curl -s -L https://nvidia.github.io/libnvidia-container/stable/deb/nvidia-container-toolkit.list | \
    sed 's#deb https://#deb [signed-by=/usr/share/keyrings/nvidia-container-toolkit-keyring.gpg] https://#g' | \
    sudo tee /etc/apt/sources.list.d/nvidia-container-toolkit.list

sudo apt-get update

sudo apt-get install -y nvidia-container-toolkit

Configuration

Prerequisites

• You installed a supported container engine (Docker, Containerd, CRI-O, Podman).
• You installed the NVIDIA Container Toolkit.

sudo nvidia-ctk runtime configure --runtime=docker --cdi.enabled

sudo systemctl restart docker

Rootless Mode

To configure the container runtime for Docker running in Rootless mode, follow these steps:

1. Configure the container runtime by using the nvidia-ctk command:

   nvidia-ctk runtime configure --runtime=docker --config=$HOME/.config/docker/daemon.json
   

2. Restart the Rootless Docker daemon

   systemctl --user restart docker
   

3. Configure /etc/nvidia-container-runtime/config.toml by using the sudo nvidia-ctk command:

   sudo nvidia-ctk config --set nvidia-container-cli.no-cgroups --in-place
   

Sample Workload

After you install and configure the toolkit and install an NVIDIA GPU Driver, you can verify your installation by running a sample workload.

sudo docker run --rm --runtime=nvidia --gpus all ubuntu nvidia-smi

Expected output:

+-----------------------------------------------------------------------------+
| NVIDIA-SMI 535.86.10    Driver Version: 535.86.10    CUDA Version: 12.2     |
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|                               |                      |               MIG M. |
|===============================+======================+======================|
|   0  Tesla T4            On   | 00000000:00:1E.0 Off |                    0 |
| N/A   34C    P8     9W /  70W |      0MiB / 15109MiB |      0%      Default |
|                               |                      |                  N/A |
+-------------------------------+----------------------+----------------------+

+-----------------------------------------------------------------------------+
| Processes:                                                                  |
|  GPU   GI   CI        PID   Type   Process name                  GPU Memory |
|        ID   ID                                                   Usage      |
|=============================================================================|
|  No running processes found                                                 |
+-----------------------------------------------------------------------------+

Support for Container Device Interface(CDI)

Source

Prerequisites

• You installed either the NVIDIA Container Toolkit or you installed the nvidia-container-toolkit-base package. The base package includes the container runtime and the nvidia-ctk command-line interface, but avoids installing the container runtime hook and transitive dependencies. The hook and dependencies are not needed on machines that use CDI exclusively
• You installed an NVIDIA GPU Driver.

Two common locations for CDI specifications are /etc/cdi/ and /var/run/cdi/. The contents of the /var/run/cdi/ directory are cleared on boot.

1. Generate the CDI specification file:

   sudo nvidia-ctk cdi generate --output=/etc/cdi/nvidia.yaml
   

   Example output

   INFO[0000] Auto-detected mode as "nvml"
   INFO[0000] Selecting /dev/nvidia0 as /dev/nvidia0
   INFO[0000] Selecting /dev/dri/card1 as /dev/dri/card1
   INFO[0000] Selecting /dev/dri/renderD128 as /dev/dri/renderD128
   INFO[0000] Using driver version xxx.xxx.xx
    ...
   

2. (Optional) Check the names of the generated devices:

   nvidia-ctk cdi list
   

   Output

   INFO[0000] Found 9 CDI devices
   nvidia.com/gpu=all
   nvidia.com/gpu=0
   

Sample Workload

docker run --rm -ti --runtime=nvidia \
    -e NVIDIA_VISIBLE_DEVICES=nvidia.com/gpu=all \
      ubuntu nvidia-smi -L

Output

GPU 0: NVIDIA GeForce RTX 3080 Laptop GPU (UUID: GPU-17c2b9a6-6be2-3857-f8e0-88143e2e621b)

Technologies

• Ubuntu 22.04.1 amd64
• Docker Compose version v2.29.7
• Python 3.10.12
• pip 22.0.2
• NVIDIA Container Toolkit CLI version 1.16.2
• NVIDIA Driver 550.120
• CUDA Version 12.4

How to Run

Ensure variables in the .env file are correct.

Install the required libraries in the python script.

pip install -r requirements.txt

First Terminal

1. Start the user interface with the following command.

docker compose --profile ui up

2. Click Launch Gazebo on the menu.

Simulated world and the drone model should be up and running in a Gazebo instance.

Second Terminal

This will launch ardupilot, mavproxy and mavros services, and will scale up by the SIM_DRONE_COUNT env variable.

1. Start the docker services with the following python script.

python3 sim_drone.py

QGroundControl

Simulated vehicle(s) should be connected to QGroundControl. SIM_DRONE_COUNT value should match the detected vehicle count on GCS.

Simulation Environment Variables

DRONE_SYS_ID and INSTANCE environment variables are incremented by 1 for each additional simulated vehicle. SERIAL0_PORT, SITL_PORT, MAVROS2_PORT, MAVROS1_PORT,FDM_PORT_IN and GSTREAMER_UDP_PORT are incremented by 10. Without in-depth knowledge, changing the default value for these ports are not recommended.

Variable	Type	Default	Description
DRONE_SYS_ID	int	1	System-ID for the simulated drone.
INSTANCE	int	0	Instance of simulator.
SERIAL0_PORT	int	5760	Mavproxy master port the simulation communicating on.
SITL_PORT	int	5501	Mavproxy Software in the Loop(SITL) port to send simulated RC input for the simulator.
MAVROS2_PORT	int	14560	MAVROS ROS 2 UDP port
MAVROS1_PORT	int	14561	MAVROS ROS 1 UDP port
FDM_PORT_IN	int	9002	Gazebo Flight Dynamics Model (FDM) UDP port
GSTREAMER_UDP_PORT	int	5600	UDP Video Streaming port
ROS_MASTER_URI	string	"http://0.0.0.0:11311"	This tells ROS 1 nodes where they can locate the master
ARDUPILOT_VEHICLE	string	"-v copter -f gazebo-mu --model=JSON -L CitadelHill"	"-v" is vehicle type,"-L" start location, "-f" is vehicle frame type, "--model" overrides simulation model to use
WORLD_FILE_NAME	string	"citadel_hill_world.sdf"	Name of the file that exists in the worlds folder.
WORLD_NAME	string	"citadel_hill"	Name of the world defined in the world file.
DRONE_MODEL	string	"spiri_mu"	Drone model that exists in the models folder.
SIM_DRONE_COUNT	int	1	Number of drones to be simulated.
GCS_PORT	int	14550	Ground Control Station(GCS) UDP connection port.

Understanding Multi-Vehicle Simulation Parameters

For instance, if SIM_DRONE_COUNT is 2, each additional vehicle's ports are incremented by 10.

First simulated vehicle would have these following values,

Variable	Value
DRONE_SYS_ID	1
INSTANCE	0
SERIAL0_PORT	5760
SITL_PORT	5501
MAVROS2_PORT	14560
MAVROS1_PORT	14561
FDM_PORT_IN	9002
GSTREAMER_UDP_PORT	5600

Second Vehicle,

Variable	Value
DRONE_SYS_ID	2
INSTANCE	1
SERIAL0_PORT	5770
SITL_PORT	5511
MAVROS2_PORT	14570
MAVROS1_PORT	14571
FDM_PORT_IN	9012
GSTREAMER_UDP_PORT	5610

Video stream would be available on UDP port on 5610 for the second vehicle after enabling streaming.