services-xbee_net/docker-compose-run-single-dev.yml

# version: '3.8'

# services:
#   xbnet-node:
#     build: .
#     container_name: xbnet_node
#     privileged: true
#     env_file: .env
#     networks:
#       # xbee_net:
#       #   ipv4_address: ${XBEE0_NET_SRC_IP}  # Ensure this IP belongs to the xbee_net subnet
#       # ipvlan_net:
#       #   ipv4_address: ${DEFAULT_IPVLAN_IP}  # Assign an IP within the same range as your host's Wi-Fi
#       macvlan_net:
#         ipv4_address: ${DEFAULT_MACVLAN_IP}  # Assign an IP within the same range as your host's Wi-Fi
    

# networks:
#   # 1. Docker's internal way of communicating between host and containers - Support 2 way comms
#   # xbee_net:
#   #   driver: bridge
#   #   ipam:
#   #     config:
#   #       - subnet: 192.168.2.0/24  # Ensure your xbnet IPs are in this range
  
#   # 2. ipvlan working ok for comms from container to host, but not host to container
#   # ipvlan_net:
#   #   driver: ipvlan
#   #   driver_opts:
#   #     mode: l3  # Use L3 mode, which is simpler for most setups
#   #     parent: wlp0s20f3  # This should be your host's Wi-Fi or Ethernet interface
#   #   ipam:
#   #     config:
#   #       - subnet: ${BASE_SUBNET}.0/24  # Match the Wi-Fi network range
#   #         gateway: ${DEFAULT_GATEWAY} # Your router's gateway
  
#   # 3. macvlan not working for some reason
#   macvlan_net:
#     driver: macvlan
#     driver_opts:
#       parent: wlp0s20f3  # This should be your host's Wi-Fi interface
#     ipam:
#       config:
#         - subnet: ${BASE_SUBNET}.0/24  # Match the Wi-Fi network range
#           gateway: ${DEFAULT_GATEWAY}  # Your router's gateway













##############################################################################



version: '3.8'

services:
  xbnet-node:
    build: .
    container_name: xbnet_node
    privileged: true
    env_file:
      - .env
    command: bash /entrypoint.sh
    # network_mode: "host"



    # command: /usr/bin/supervisord -c  /etc/supervisor/conf.d/supervisord.conf
    # command: tail -f /dev/null
#     networks:
#       xbee_net:
#         ipv4_address: ${XBEE_NET_SRC_IP}  # Ensure this IP belongs to the xbee_net subnet

# networks:
#   xbee_net:
#     driver: bridge
#     ipam:
#       config:
#         - subnet: ${BASE_SUBNET}.0/24  # Match the network's subnet
#           gateway: ${DEFAULT_GATEWAY}  # Gateway for central router