ROSBuzz

Description:

ROSBuzz is a ROS node encompassing Buzz Virtual Machine (BVM) and interfacing with ROS ecosystem for mobile robots. The only node of the package is rosbuzz_node. It can be used in simulation-in-the-loop using Gazebo and was tested over many platforms (Clearpath Husky, DJI M100, Intel Aero, 3DR Solos, Pleidis Spiris, etc.). More information about ROSBuzz peripheral nodes is available in [1].

What is Buzz?

Buzz is a novel programming language for heterogeneous robots swarms. Buzz advocates a compositional approach, by offering primitives to define swarm behaviors both in a bottom-up and in a top-down fashion. Its official documentation and code are available Buzz.

Requirements

• Buzz:

Follow the required steps in Buzz.

• ROS base binary distribution (Indigo or higher):

Follow the required steps in ROS Kinetic. Note that the guidance and camera node of DJI for the M100 require to use the Indigo distribution.

• ROS additionnal dependencies:

$ sudo apt-get install ros-<distro>-mavros ros-<distro>-mavros-extras

Compilation

mkdir -p ROS_WS/src
cd ROS_WS/src
git clone https://github.com/MISTLab/ROSBuzz rosbuzz
cd ..
catkin_make

Run

To run the ROSBuzz package using the launch file, execute the following:

$ roslaunch rosbuzz rosbuzz.launch

Have a look at the launch file to understand what parameters are available to suit your usage. All topics and services names are listed in launch_config/topics.yaml. Note : Before launching the ROSBuzz node, verify all the parameters in the launch file. A launch file using gdb is available too (rosbuzzd.launch).

• Buzz scripts: Several behavioral scripts are included in the "buzz_Scripts" folder, such as "graphformGPS.bzz" uses in [1] and the "testaloneWP.bzz" to control a single drone with a ".csv" list of waypoints. The script "empty.bzz" is a template script.

Publishers

• Messages from Buzz (BVM): The node publishes mavros_msgs/Mavlink message "outMavlink".

• Command to the flight controller: The node publishes geometry_msgs/PoseStamped message "setpoint_position/local".

• Other information from the swarw: The node publishes:

  • "bvmstate" (std_msgs/String)
  • "neighbours_pos" (rosbuzz_msgs/neigh_pos)
  • "fleet_status" (mavros_msgs/Mavlink)

Subscribers

• Information from the Robot controller (mavros compliant): The node subscribes to:

  • "global_position/global" (sensor_msgs/NavSatFix message)
  • "global_position/rel_alt" (std_msgs/Float64)
  • "local_position/pose" (geometry_msgs/PoseStamped)
  • "battery" (sensor_msgs/BatteryState)
  • either "extended_state" (mavros_msgs/ExtendedState) or "state" (mavros_msgs/State)

• Messages to Buzz (BVM): The node subscribes to mavros_msgs/Mavlink incoming message with name "inMavlink".

Services

• Remote Controller: The package offers a service "buzzcmd" (mavros_msgs/CommandLong) to control it. In the "misc" folder, a bash script shows how to control the swarm state from the command line.

References

• [1] ROS and Buzz : consensus-based behaviors for heterogeneous teams. St-Onge, D., Shankar Varadharajan, V., Li, G., Svogor, I. and Beltrame, G. arXiv : https://arxiv.org/abs/1710.08843

• [2] Over-The-Air Updates for Robotic Swarms. Submitted to IEEE Software (August 2017). 8pgs. Shankar Varadharajan, V., St-Onge, D., Guß, C. and Beltrame, G.

Visual Studio Code

To activate highlights of the code in Visual Studio Code or Roboware add the following to settings.json:

    "files.associations": {
        "*.bzz":"python"
    }