cpython/Doc/library/binascii.rst

184 lines
6.6 KiB
ReStructuredText

:mod:`!binascii` --- Convert between binary and ASCII
=====================================================
.. module:: binascii
:synopsis: Tools for converting between binary and various ASCII-encoded binary
representations.
.. index::
pair: module; base64
--------------
The :mod:`binascii` module contains a number of methods to convert between
binary and various ASCII-encoded binary representations. Normally, you will not
use these functions directly but use wrapper modules like
:mod:`base64` instead. The :mod:`binascii` module contains
low-level functions written in C for greater speed that are used by the
higher-level modules.
.. note::
``a2b_*`` functions accept Unicode strings containing only ASCII characters.
Other functions only accept :term:`bytes-like objects <bytes-like object>` (such as
:class:`bytes`, :class:`bytearray` and other objects that support the buffer
protocol).
.. versionchanged:: 3.3
ASCII-only unicode strings are now accepted by the ``a2b_*`` functions.
The :mod:`binascii` module defines the following functions:
.. function:: a2b_uu(string)
Convert a single line of uuencoded data back to binary and return the binary
data. Lines normally contain 45 (binary) bytes, except for the last line. Line
data may be followed by whitespace.
.. function:: b2a_uu(data, *, backtick=False)
Convert binary data to a line of ASCII characters, the return value is the
converted line, including a newline char. The length of *data* should be at most
45. If *backtick* is true, zeros are represented by ``'`'`` instead of spaces.
.. versionchanged:: 3.7
Added the *backtick* parameter.
.. function:: a2b_base64(string, /, *, strict_mode=False)
Convert a block of base64 data back to binary and return the binary data. More
than one line may be passed at a time.
If *strict_mode* is true, only valid base64 data will be converted. Invalid base64
data will raise :exc:`binascii.Error`.
Valid base64:
* Conforms to :rfc:`3548`.
* Contains only characters from the base64 alphabet.
* Contains no excess data after padding (including excess padding, newlines, etc.).
* Does not start with a padding.
.. versionchanged:: 3.11
Added the *strict_mode* parameter.
.. function:: b2a_base64(data, *, newline=True)
Convert binary data to a line of ASCII characters in base64 coding. The return
value is the converted line, including a newline char if *newline* is
true. The output of this function conforms to :rfc:`3548`.
.. versionchanged:: 3.6
Added the *newline* parameter.
.. function:: a2b_qp(data, header=False)
Convert a block of quoted-printable data back to binary and return the binary
data. More than one line may be passed at a time. If the optional argument
*header* is present and true, underscores will be decoded as spaces.
.. function:: b2a_qp(data, quotetabs=False, istext=True, header=False)
Convert binary data to a line(s) of ASCII characters in quoted-printable
encoding. The return value is the converted line(s). If the optional argument
*quotetabs* is present and true, all tabs and spaces will be encoded. If the
optional argument *istext* is present and true, newlines are not encoded but
trailing whitespace will be encoded. If the optional argument *header* is
present and true, spaces will be encoded as underscores per :rfc:`1522`. If the
optional argument *header* is present and false, newline characters will be
encoded as well; otherwise linefeed conversion might corrupt the binary data
stream.
.. function:: crc_hqx(data, value)
Compute a 16-bit CRC value of *data*, starting with *value* as the
initial CRC, and return the result. This uses the CRC-CCITT polynomial
*x*:sup:`16` + *x*:sup:`12` + *x*:sup:`5` + 1, often represented as
0x1021. This CRC is used in the binhex4 format.
.. function:: crc32(data[, value])
Compute CRC-32, the unsigned 32-bit checksum of *data*, starting with an
initial CRC of *value*. The default initial CRC is zero. The algorithm
is consistent with the ZIP file checksum. Since the algorithm is designed for
use as a checksum algorithm, it is not suitable for use as a general hash
algorithm. Use as follows::
print(binascii.crc32(b"hello world"))
# Or, in two pieces:
crc = binascii.crc32(b"hello")
crc = binascii.crc32(b" world", crc)
print('crc32 = {:#010x}'.format(crc))
.. versionchanged:: 3.0
The result is always unsigned.
.. function:: b2a_hex(data[, sep[, bytes_per_sep=1]])
hexlify(data[, sep[, bytes_per_sep=1]])
Return the hexadecimal representation of the binary *data*. Every byte of
*data* is converted into the corresponding 2-digit hex representation. The
returned bytes object is therefore twice as long as the length of *data*.
Similar functionality (but returning a text string) is also conveniently
accessible using the :meth:`bytes.hex` method.
If *sep* is specified, it must be a single character str or bytes object.
It will be inserted in the output after every *bytes_per_sep* input bytes.
Separator placement is counted from the right end of the output by default,
if you wish to count from the left, supply a negative *bytes_per_sep* value.
>>> import binascii
>>> binascii.b2a_hex(b'\xb9\x01\xef')
b'b901ef'
>>> binascii.hexlify(b'\xb9\x01\xef', '-')
b'b9-01-ef'
>>> binascii.b2a_hex(b'\xb9\x01\xef', b'_', 2)
b'b9_01ef'
>>> binascii.b2a_hex(b'\xb9\x01\xef', b' ', -2)
b'b901 ef'
.. versionchanged:: 3.8
The *sep* and *bytes_per_sep* parameters were added.
.. function:: a2b_hex(hexstr)
unhexlify(hexstr)
Return the binary data represented by the hexadecimal string *hexstr*. This
function is the inverse of :func:`b2a_hex`. *hexstr* must contain an even number
of hexadecimal digits (which can be upper or lower case), otherwise an
:exc:`Error` exception is raised.
Similar functionality (accepting only text string arguments, but more
liberal towards whitespace) is also accessible using the
:meth:`bytes.fromhex` class method.
.. exception:: Error
Exception raised on errors. These are usually programming errors.
.. exception:: Incomplete
Exception raised on incomplete data. These are usually not programming errors,
but may be handled by reading a little more data and trying again.
.. seealso::
Module :mod:`base64`
Support for RFC compliant base64-style encoding in base 16, 32, 64,
and 85.
Module :mod:`quopri`
Support for quoted-printable encoding used in MIME email messages.