cpython/Doc/packaging/commandref.rst

375 lines
10 KiB
ReStructuredText

.. _packaging-command-reference:
*****************
Command Reference
*****************
This reference briefly documents all standard Packaging commands and some of
their options.
.. FIXME does not work: Use pysetup run --help-commands to list all
standard and extra commands availavble on your system, with their
description. Use pysetup run <command> --help to get help about the options
of one command.
.. XXX sections from this document should be merged with other docs (e.g. check
and upload with uploading.rst, install_* with install/install.rst, etc.);
there is no value in partially duplicating information. this file could
however serve as an index, i.e. just a list of all commands with links to
every section that describes options or usage
Preparing distributions
=======================
:command:`check`
----------------
Perform some tests on the metadata of a distribution.
For example, it verifies that all required metadata fields are provided in the
:file:`setup.cfg` file.
.. TODO document reST checks
:command:`test`
---------------
Run a test suite.
When doing test-driven development, or running automated builds that need
testing before they are installed for downloading or use, it's often useful to
be able to run a project's unit tests without actually installing the project
anywhere. The :command:`test` command runs project's unit tests without
actually installing it, by temporarily putting the project's source on
:data:`sys.path`, after first running :command:`build_ext -i` to ensure that any
C extensions are built.
You can use this command in one of two ways: either by specifying a
unittest-compatible test suite for your project (or any callable that returns
it) or by passing a test runner function that will run your tests and display
results in the console. Both options take a Python dotted name in the form
``package.module.callable`` to specify the object to use.
If none of these options are specified, Packaging will try to perform test
discovery using either unittest (for Python 3.2 and higher) or unittest2 (for
older versions, if installed).
.. this is a pseudo-command name used to disambiguate the options in indexes and
links
.. program:: packaging test
.. cmdoption:: --suite=NAME, -s NAME
Specify the test suite (or module, class, or method) to be run. The default
for this option can be set by in the project's :file:`setup.cfg` file:
.. code-block:: cfg
[test]
suite = mypackage.tests.get_all_tests
.. cmdoption:: --runner=NAME, -r NAME
Specify the test runner to be called.
:command:`config`
-----------------
Perform distribution configuration.
The build step
==============
This step is mainly useful to compile C/C++ libraries or extension modules. The
build commands can be run manually to check for syntax errors or packaging
issues (for example if the addition of a new source file was forgotten in the
:file:`setup.cfg` file), and is also run automatically by commands which need
it. Packaging checks the mtime of source and built files to avoid re-building
if it's not necessary.
:command:`build`
----------------
Build all files of a distribution, delegating to the other :command:`build_*`
commands to do the work.
:command:`build_clib`
---------------------
Build C libraries.
:command:`build_ext`
--------------------
Build C/C++ extension modules.
:command:`build_py`
-------------------
Build the Python modules (just copy them to the build directory) and
:term:`byte-compile <bytecode>` them to :file:`.pyc` and/or :file:`.pyo` files.
The byte compilation is controlled by two sets of options:
- ``--compile`` and ``--no-compile`` are used to control the creation of
:file:`.pyc` files; the default is ``--no-compile``.
- ``--optimize N`` (or ``-ON``) is used to control the creation of :file:`.pyo`
files: ``-O1`` turns on basic optimizations, ``-O2`` also discards docstrings,
``-O0`` does not create :file:`.pyo` files; the default is ``-O0``.
You can mix and match these options: for example, ``--no-compile --optimize 2``
will create :file:`.pyo` files but no :file:`.pyc` files.
.. XXX these option roles do not work
Calling Python with :option:`-O` or :option:`-B` does not control the creation
of bytecode files, only the options described above do.
:command:`build_scripts`
------------------------
Build the scripts (just copy them to the build directory and adjust their
shebang if they're Python scripts).
:command:`clean`
----------------
Clean the build tree of the release.
.. program:: packaging clean
.. cmdoption:: --all, -a
Remove build directories for modules, scripts, etc., not only temporary build
by-products.
Creating source and built distributions
=======================================
:command:`sdist`
----------------
Build a source distribution for a release.
It is recommended that you always build and upload a source distribution. Users
of OSes with easy access to compilers and users of advanced packaging tools will
prefer to compile from source rather than using pre-built distributions. For
Windows users, providing a binary installer is also recommended practice.
:command:`bdist`
----------------
Build a binary distribution for a release.
This command will call other :command:`bdist_*` commands to create one or more
distributions depending on the options given. The default is to create a
.tar.gz archive on Unix and a zip archive on Windows or OS/2.
.. program:: packaging bdist
.. cmdoption:: --formats
Binary formats to build (comma-separated list).
.. cmdoption:: --show-formats
Dump list of available formats.
:command:`bdist_dumb`
---------------------
Build a "dumb" installer, a simple archive of files that could be unpacked under
``$prefix`` or ``$exec_prefix``.
:command:`bdist_wininst`
------------------------
Build a Windows installer.
:command:`bdist_msi`
--------------------
Build a `Microsoft Installer`_ (.msi) file.
.. _Microsoft Installer: http://msdn.microsoft.com/en-us/library/cc185688(VS.85).aspx
In most cases, the :command:`bdist_msi` installer is a better choice than the
:command:`bdist_wininst` installer, because it provides better support for Win64
platforms, allows administrators to perform non-interactive installations, and
allows installation through group policies.
Publishing distributions
========================
:command:`register`
-------------------
This command registers the current release with the Python Package Index. This
is described in more detail in :PEP:`301`.
.. TODO explain user and project registration with the web UI
:command:`upload`
-----------------
Upload source and/or binary distributions to PyPI.
The distributions have to be built on the same command line as the
:command:`upload` command; see :ref:`packaging-package-upload` for more info.
.. program:: packaging upload
.. cmdoption:: --sign, -s
Sign each uploaded file using GPG (GNU Privacy Guard). The ``gpg`` program
must be available for execution on the system ``PATH``.
.. cmdoption:: --identity=NAME, -i NAME
Specify the identity or key name for GPG to use when signing. The value of
this option will be passed through the ``--local-user`` option of the
``gpg`` program.
.. cmdoption:: --show-response
Display the full response text from server; this is useful for debugging
PyPI problems.
.. cmdoption:: --repository=URL, -r URL
The URL of the repository to upload to. Defaults to
http://pypi.python.org/pypi (i.e., the main PyPI installation).
.. cmdoption:: --upload-docs
Also run :command:`upload_docs`. Mainly useful as a default value in
:file:`setup.cfg` (on the command line, it's shorter to just type both
commands).
:command:`upload_docs`
----------------------
Upload HTML documentation to PyPI.
PyPI now supports publishing project documentation at a URI of the form
``http://packages.python.org/<project>``. :command:`upload_docs` will create
the necessary zip file out of a documentation directory and will post to the
repository.
Note that to upload the documentation of a project, the corresponding version
must already be registered with PyPI, using the :command:`register` command ---
just like with :command:`upload`.
Assuming there is an ``Example`` project with documentation in the subdirectory
:file:`docs`, for example::
Example/
example.py
setup.cfg
docs/
build/
html/
index.html
tips_tricks.html
conf.py
index.txt
tips_tricks.txt
You can simply specify the directory with the HTML files in your
:file:`setup.cfg` file:
.. code-block:: cfg
[upload_docs]
upload-dir = docs/build/html
.. program:: packaging upload_docs
.. cmdoption:: --upload-dir
The directory to be uploaded to the repository. By default documentation
is searched for in ``docs`` (or ``doc``) directory in project root.
.. cmdoption:: --show-response
Display the full response text from server; this is useful for debugging
PyPI problems.
.. cmdoption:: --repository=URL, -r URL
The URL of the repository to upload to. Defaults to
http://pypi.python.org/pypi (i.e., the main PyPI installation).
The install step
================
These commands are used by end-users of a project using :program:`pysetup` or
another compatible installer. Each command will run the corresponding
:command:`build_*` command and then move the built files to their destination on
the target system.
:command:`install_dist`
-----------------------
Install a distribution, delegating to the other :command:`install_*` commands to
do the work. See :ref:`packaging-how-install-works` for complete usage
instructions.
:command:`install_data`
-----------------------
Install data files.
:command:`install_distinfo`
---------------------------
Install files recording details of the installation as specified in :PEP:`376`.
:command:`install_headers`
--------------------------
Install C/C++ header files.
:command:`install_lib`
----------------------
Install all modules (extensions and pure Python).
.. XXX what about C libraries created with build_clib?
Similarly to ``build_py``, there are options to control the compilation of
Python code to :term:`bytecode` files (see above). By default, :file:`.pyc`
files will be created (``--compile``) and :file:`.pyo` files will not
(``--optimize 0``).
:command:`install_scripts`
--------------------------
Install scripts.