Mirror
/
cpython
mirror of https://github.com/python/cpython
4
1
Fork 0
Code Issues Releases Wiki Activity
cpython/Doc/perl/l2hinit.perl

548 lines
18 KiB
Perl
Raw Blame History

# LaTeX2HTML support base for use with Python documentation.
package main;
use L2hos;
$HTML_VERSION = 4.0;
$MAX_LINK_DEPTH = 2;
$ADDRESS = '';
$NO_FOOTNODE = 1;
$NUMBERED_FOOTNOTES = 1;
# Python documentation uses section numbers to support references to match
# in the printed and online versions.
#
$SHOW_SECTION_NUMBERS = 1;
$ICONSERVER = '../icons';
$IMAGE_TYPE = 'gif';
# Control where the navigation bars should show up:
$TOP_NAVIGATION = 1;
$BOTTOM_NAVIGATION = 1;
$AUTO_NAVIGATION = 0;
# these exactly match the python.org colors
$BODYTEXT = ('bgcolor="#ffffff" text="#000000"'
. ' link="#0000bb" vlink="#551a8b" alink="#ff0000"');
$CHILDLINE = "\n<p><hr>\n";
$VERBOSITY = 0;
# default # of columns for the indexes
$INDEX_COLUMNS = 2;
$MODULE_INDEX_COLUMNS = 4;
# A little painful, but lets us clean up the top level directory a little,
# and not be tied to the current directory (as far as I can tell). Testing
# an existing definition of $mydir is needed since it cannot be computed when
# run under mkhowto with recent versions of LaTeX2HTML, since this file is
# not read directly by LaTeX2HTML any more. mkhowto is required to prepend
# the required definition at the top of the actual input file.
#
if (!defined $mydir) {
use Cwd;
use File::Basename;
($myname, $mydir, $myext) = fileparse(__FILE__, '\..*');
chop $mydir; # remove trailing '/'
$mydir = getcwd() . "$dd$mydir"
unless $mydir =~ s|^/|/|;
}
$LATEX2HTMLSTYLES = "$mydir$envkey$LATEX2HTMLSTYLES";
push (@INC, $mydir);
($myrootname, $myrootdir, $myext) = fileparse($mydir, '\..*');
chop $myrootdir;
# Hackish way to get the appropriate paper-*/ directory into $TEXINPUTS;
# pass in the paper size (a4 or letter) as the environment variable PAPER
# to add the right directory. If not given, the current directory is
# added instead for use with HOWTO processing.
#
if (defined $ENV{'PAPER'}) {
$mytexinputs = "$myrootdir${dd}paper-$ENV{'PAPER'}$envkey";
}
else {
$mytexinputs = getcwd() . $envkey;
}
$mytexinputs .= "$myrootdir${dd}texinputs";
# Change this variable to change the text added in "About this document...";
# this should be an absolute pathname to get it right.
#
$ABOUT_FILE = "$myrootdir${dd}html${dd}stdabout.dat";
sub custom_driver_hook {
#
# This adds the directory of the main input file to $TEXINPUTS; it
# seems to be sufficiently general that it should be fine for HOWTO
# processing.
#
my $file = @_[0];
my($jobname, $dir, $ext) = fileparse($file, '\..*');
$dir = L2hos->Make_directory_absolute($dir);
$dir =~ s/$dd$//;
$TEXINPUTS = "$dir$envkey$mytexinputs";
print "\nAdding $dir to \$TEXINPUTS\n";
}
$CUSTOM_BUTTONS = '';
sub make_nav_sectref {
my($label,$title) = @_;
if ($title) {
return ("<b class='navlabel'>$label:</b> "
. "<span class='sectref'>$title</span>\n");
}
return '';
}
sub make_my_icon {
my($name, $text) = @_;
my $iconserver = ($ICONSERVER eq '.') ? '' : "$ICONSERVER/";
return "<img src=\"$iconserver$name.$IMAGE_TYPE\" border=\"0\""
. " height=\"32\"\n alt=\"$text\" width=\"32\">";
}
$BLANK_ICON = make_my_icon('blank', '');
@my_icons = ();
$my_icons{'next_page_inactive'} = $BLANK_ICON;
$my_icons{'previous_page_inactive'} = $BLANK_ICON;
$my_icons{'up_page_inactive'} = $BLANK_ICON;
$x = make_my_icon('next', 'Next Page');
$my_icons{'next_page'} = $x;
$my_icons{'next'} = $x;
$x = make_my_icon('previous', 'Previous Page');
$my_icons{'previous_page'} = $x;
$my_icons{'previous'} = $x;
$my_icons{'up'} = make_my_icon('up', 'Up One Level');
$my_icons{'contents'} = make_my_icon('contents', 'Contents');
$my_icons{'index'} = make_my_icon('index', 'Index');
$my_icons{'modules'} = make_my_icon('modules', 'Module Index');
sub use_my_icon {
my $s = @_[0];
$s =~ s/\<tex2html_([a-z_]+)_visible_mark\>/$my_icons{$1}/;
return $s;
}
sub make_nav_panel {
my $s;
$NEXT = $NEXT_TITLE ? use_my_icon("$NEXT") : $BLANK_ICON;
$UP = $UP_TITLE ? use_my_icon("$UP") : $BLANK_ICON;
$PREVIOUS = $PREVIOUS_TITLE ? use_my_icon("$PREVIOUS") : $BLANK_ICON;
$CONTENTS = use_my_icon("$CONTENTS");
$INDEX = $INDEX ? use_my_icon("$INDEX") : $BLANK_ICON;
if (!$CUSTOM_BUTTONS) {
$CUSTOM_BUTTONS = $BLANK_ICON;
}
$s = ('<table align="center" width="100%" cellpadding="0" cellspacing="2">'
. "\n<tr>"
# left-hand side
. "\n<td>$PREVIOUS</td>"
. "\n<td>$UP</td>"
. "\n<td>$NEXT</td>"
# title box
. "\n<td align=\"center\" width=\"100%\">$t_title</td>"
# right-hand side
. "\n<td>$CONTENTS</td>"
. "\n<td>$CUSTOM_BUTTONS</td>" # module index
. "\n<td>$INDEX</td>"
. "\n</tr></table>\n"
# textual navigation
. make_nav_sectref("Previous", $PREVIOUS_TITLE)
. make_nav_sectref("Up", $UP_TITLE)
. make_nav_sectref("Next", $NEXT_TITLE)
);
# remove these; they are unnecessary and cause errors from validation
$s =~ s/ NAME="tex2html\d+"\n */ /g;
return $s;
}
sub top_navigation_panel {
return make_nav_panel()
. '<br><hr>';
}
sub bot_navigation_panel {
return "<p><hr>"
. make_nav_panel();
}
sub add_link {
# Returns a pair (iconic link, textual link)
my($icon, $current_file, @link) = @_;
my($dummy, $file, $title) = split($delim,
$section_info{join(' ',@link)});
$icon =~ s/\<tex2html_([_a-z]+)_visible_mark\>/$my_icons{$1}/;
if ($title && ($file ne $current_file)) {
$title = purify($title);
$title = get_first_words($title, $WORDS_IN_NAVIGATION_PANEL_TITLES);
return (make_href($file, $icon), make_href($file, "$title"))
}
elsif ($icon eq $my_icons{"up"} && $EXTERNAL_UP_LINK) {
return (make_href($EXTERNAL_UP_LINK, $icon),
make_href($EXTERNAL_UP_LINK, "$EXTERNAL_UP_TITLE"))
}
elsif ($icon eq $my_icons{"previous"}
&& $EXTERNAL_PREV_LINK && $EXTERNAL_PREV_TITLE) {
return (make_href($EXTERNAL_PREV_LINK, $icon),
make_href($EXTERNAL_PREV_LINK, "$EXTERNAL_PREV_TITLE"))
}
elsif ($icon eq $my_icons{"next"}
&& $EXTERNAL_DOWN_LINK && $EXTERNAL_DOWN_TITLE) {
return (make_href($EXTERNAL_DOWN_LINK, $icon),
make_href($EXTERNAL_DOWN_LINK, "$EXTERNAL_DOWN_TITLE"))
}
return (&inactive_img($icon), "");
}
sub add_special_link {
my($icon, $file, $current_file) = @_;
$icon =~ s/\<tex2html_([_a-z]+)_visible_mark\>/$my_icons{$1}/;
return (($file && ($file ne $current_file))
? make_href($file, $icon)
: undef)
}
# The img_tag() function seems only to be called with the parameter
# 'anchor_invisible_mark', which we want to turn into ''. Since
# replace_icon_marks() is the only interesting caller, and all it really
# does is call img_tag(), we can just define the hook alternative to be
# a no-op instead.
#
sub replace_icons_hook {}
sub do_cmd_arabic {
# get rid of that nasty <SPAN CLASS="arabic">...</SPAN>
my($ctr, $val, $id, $text) = &read_counter_value(@_[0]);
return ($val ? farabic($val) : "0") . $text;
}
sub gen_index_id {
# this is used to ensure common index key generation and a stable sort
my($str,$extra) = @_;
sprintf('%s###%s%010d', $str, $extra, ++$global{'max_id'});
}
sub insert_index {
my($mark,$datafile,$columns,$letters,$prefix) = @_;
my $prog = "$myrootdir/tools/buildindex.py";
my $index;
if ($letters) {
$index = `$prog --columns $columns --letters $datafile`;
}
else {
$index = `$prog --columns $columns $datafile`;
}
if (!s/$mark/$prefix$index/) {
print "\nCould not locate index mark: $mark";
}
}
sub add_idx {
print "\nBuilding HTML for the index ...";
close(IDXFILE);
insert_index($idx_mark, 'index.dat', $INDEX_COLUMNS, 1, '');
}
$idx_module_mark = '<tex2html_idx_module_mark>';
$idx_module_title = 'Module Index';
sub add_module_idx {
print "\nBuilding HTML for the module index ...";
my $key;
my $first = 1;
my $prevplat = '';
my $allthesame = 1;
my $prefix = '';
foreach $key (keys %Modules) {
$key =~ s/<tt>([a-zA-Z0-9._]*)<\/tt>/\1/;
my $plat = "$ModulePlatforms{$key}";
$plat = ''
if ($plat eq $IGNORE_PLATFORM_ANNOTATION);
if (!$first) {
$allthesame = 0
if ($prevplat ne $plat);
}
else { $first = 0; }
$prevplat = $plat;
}
open(MODIDXFILE, '>modindex.dat') || die "\n$!\n";
foreach $key (keys %Modules) {
# dump the line in the data file; just use a dummy seqno field
my $nkey = $1;
my $moditem = "$Modules{$key}";
my $plat = '';
$key =~ s/<tt>([a-zA-Z0-9._]*)<\/tt>/\1/;
if ($ModulePlatforms{$key} && !$allthesame) {
$plat = (" <em>(<span class='platform'>$ModulePlatforms{$key}"
. '</span>)</em>');
}
print MODIDXFILE $moditem . $IDXFILE_FIELD_SEP
. "<tt class='module'>$key</tt>$plat###\n";
}
close(MODIDXFILE);
if (!$allthesame) {
$prefix = <<PLAT_DISCUSS;
<p> Some module names are followed by an annotation indicating what
platform they are available on.</p>
PLAT_DISCUSS
}
insert_index($idx_module_mark, 'modindex.dat', $MODULE_INDEX_COLUMNS, 0,
$prefix);
}
# replace both indexes as needed:
sub add_idx_hook {
add_idx() if (/$idx_mark/);
process_python_state();
if ($MODULE_INDEX_FILE) {
local ($_);
open(MYFILE, "<$MODULE_INDEX_FILE");
sysread(MYFILE, $_, 1024*1024);
close(MYFILE);
add_module_idx();
open(MYFILE,">$MODULE_INDEX_FILE");
print MYFILE $_;
close(MYFILE);
}
}
# In addition to the standard stuff, add label to allow named node files and
# support suppression of the page complete (for HTML Help use).
sub do_cmd_tableofcontents {
local($_) = @_;
$TITLE = $toc_title;
$tocfile = $CURRENT_FILE;
my($closures,$reopens) = preserve_open_tags();
anchor_label('contents', $CURRENT_FILE, $_); # this is added
join('', "<BR>\n\\tableofchildlinks[off]", $closures
, make_section_heading($toc_title, 'H2'), $toc_mark
, $reopens, $_);
}
# In addition to the standard stuff, add label to allow named node files.
sub do_cmd_listoffigures {
local($_) = @_;
$TITLE = $lof_title;
$loffile = $CURRENT_FILE;
my($closures,$reopens) = preserve_open_tags();
anchor_label('lof', $CURRENT_FILE, $_); # this is added
join('', "<BR>\n", $closures
, make_section_heading($lof_title, 'H2'), $lof_mark
, $reopens, $_);
}
# In addition to the standard stuff, add label to allow named node files.
sub do_cmd_listoftables {
local($_) = @_;
$TITLE = $lot_title;
$lotfile = $CURRENT_FILE;
my($closures,$reopens) = preserve_open_tags();
anchor_label('lot', $CURRENT_FILE, $_); # this is added
join('', "<BR>\n", $closures
, make_section_heading($lot_title, 'H2'), $lot_mark
, $reopens, $_);
}
# In addition to the standard stuff, add label to allow named node files.
sub do_cmd_textohtmlinfopage {
local($_) = @_;
if ($INFO) { #
anchor_label("about",$CURRENT_FILE,$_); # this is added
} #
my $the_version = ''; # and the rest is
if ($t_date) { # mostly ours
$the_version = ",\n$t_date";
if ($PYTHON_VERSION) {
$the_version .= ", Release $PYTHON_VERSION";
}
}
$_ = (($INFO == 1)
? join('',
$close_all,
"<strong>$t_title</strong>$the_version\n",
`cat $ABOUT_FILE`,
$open_all, $_)
: join('', $close_all, $INFO,"\n", $open_all, $_));
$_;
}
# $idx_mark will be replaced with the real index at the end
sub do_cmd_textohtmlindex {
local($_) = @_;
$TITLE = $idx_title;
$idxfile = $CURRENT_FILE;
if (%index_labels) { make_index_labels(); }
if (($SHORT_INDEX) && (%index_segment)) { make_preindex(); }
else { $preindex = ''; }
my $heading = make_section_heading($idx_title, 'h2') . $idx_mark;
my($pre,$post) = minimize_open_tags($heading);
anchor_label('genindex',$CURRENT_FILE,$_); # this is added
return "<br>\n" . $pre . $_;
}
$MODULE_INDEX_FILE = '';
# $idx_module_mark will be replaced with the real index at the end
sub do_cmd_textohtmlmoduleindex {
local($_) = @_;
$TITLE = $idx_module_title;
anchor_label('modindex', $CURRENT_FILE, $_);
$MODULE_INDEX_FILE = "$CURRENT_FILE";
$_ = ('<p>' . make_section_heading($idx_module_title, 'h2')
. $idx_module_mark . $_);
return $_;
}
# The bibliography and the index should be treated as separate
# sections in their own HTML files. The \bibliography{} command acts
# as a sectioning command that has the desired effect. But when the
# bibliography is constructed manually using the thebibliography
# environment, or when using the theindex environment it is not
# possible to use the normal sectioning mechanism. This subroutine
# inserts a \bibliography{} or a dummy \textohtmlindex command just
# before the appropriate environments to force sectioning.
# XXX This *assumes* that if there are two {theindex} environments,
# the first is the module index and the second is the standard
# index. This is sufficient for the current Python documentation,
# but that's about it.
sub add_bbl_and_idx_dummy_commands {
my $id = $global{'max_id'};
s/([\\]begin\s*$O\d+$C\s*thebibliography)/$bbl_cnt++; $1/eg;
s/([\\]begin\s*$O\d+$C\s*thebibliography)/$id++; "\\bibliography$O$id$C$O$id$C $1"/geo;
my(@parts) = split(/\\begin\s*$O\d+$C\s*theindex/);
if (scalar(@parts) == 3) {
# Be careful to re-write the string in place, since $_ is *not*
# returned explicity; *** nasty side-effect dependency! ***
print "\nadd_bbl_and_idx_dummy_commands ==> adding module index";
my $rx = "([\\\\]begin\\s*$O\\d+$C\\s*theindex[\\s\\S]*)"
. "([\\\\]begin\\s*$O\\d+$C\\s*theindex)";
s/$rx/\\textohtmlmoduleindex \1 \\textohtmlindex \2/o;
# Add a button to the navigation areas:
$CUSTOM_BUTTONS .= ('<a href="modindex.html" title="Module Index">'
. $my_icons{'modules'}
. '</a>');
}
else {
$CUSTOM_BUTTONS .= $BLANK_ICON;
$global{'max_id'} = $id; # not sure why....
s/([\\]begin\s*$O\d+$C\s*theindex)/\\textohtmlindex $1/o;
s/[\\]printindex/\\textohtmlindex /o;
}
#----------------------------------------------------------------------
lib_add_bbl_and_idx_dummy_commands()
if defined(&lib_add_bbl_and_idx_dummy_commands);
}
# The bibliographic references, the appendices, the lists of figures
# and tables etc. must appear in the contents table at the same level
# as the outermost sectioning command. This subroutine finds what is
# the outermost level and sets the above to the same level;
sub set_depth_levels {
# Sets $outermost_level
my $level;
#RRM: do not alter user-set value for $MAX_SPLIT_DEPTH
foreach $level ("part", "chapter", "section", "subsection",
"subsubsection", "paragraph") {
last if (($outermost_level) = /\\($level)$delimiter_rx/);
}
$level = ($outermost_level ? $section_commands{$outermost_level} :
do {$outermost_level = 'section'; 3;});
#RRM: but calculate value for $MAX_SPLIT_DEPTH when a $REL_DEPTH was given
if ($REL_DEPTH && $MAX_SPLIT_DEPTH) {
$MAX_SPLIT_DEPTH = $level + $MAX_SPLIT_DEPTH;
} elsif (!($MAX_SPLIT_DEPTH)) { $MAX_SPLIT_DEPTH = 1 };
%unnumbered_section_commands = ('tableofcontents' => $level,
'listoffigures' => $level,
'listoftables' => $level,
'bibliography' => $level,
'textohtmlindex' => $level,
'textohtmlmoduleindex' => $level);
$section_headings{'textohtmlmoduleindex'} = 'h1';
%section_commands = (%unnumbered_section_commands,
%section_commands);
make_sections_rx();
}
# This changes the markup used for {verbatim} environments, and is the
# best way I've found that ensures the <dl> goes on the outside of the
# <pre>...</pre>.
#
# Note that this *must* be done in the init file, not the python.perl
# style support file. The %declarations must be set before
# initialize() is called in the main LaTeX2HTML script (which happens
# before style files are loaded).
#
%declarations = ('preform' => '<dl><dd><pre class="verbatim"></pre></dl>',
%declarations);
# This is added to get rid of the long comment that follows the
# doctype declaration; MSIE5 on NT4 SP4 barfs on it and drops the
# content of the page.
sub make_head_and_body {
my($title, $body) = @_;
my $DTDcomment = '';
my($version, $isolanguage) = ($HTML_VERSION, 'EN');
my %isolanguages = ( 'english', 'EN' , 'USenglish', 'EN.US'
, 'original', 'EN' , 'german' , 'DE'
, 'austrian', 'DE.AT', 'french' , 'FR'
, 'spanish', 'ES');
$isolanguage = $isolanguages{$default_language};
$isolanguage = 'EN' unless $isolanguage;
$title = &purify($title,1);
eval("\$title = ". $default_title ) unless ($title);
# allow user-modification of the <TITLE> tag; thanks Dan Young
if (defined &custom_TITLE_hook) {
$title = &custom_TITLE_hook($title, $toc_sec_title);
}
if ($DOCTYPE =~ /\/\/[\w\.]+\s*$/) { # language spec included
$DTDcomment = "<!DOCTYPE html PUBLIC \"$DOCTYPE\">\n";
} else {
$DTDcomment = "<!DOCTYPE html PUBLIC \"$DOCTYPE//"
. ($ISO_LANGUAGE ? $ISO_LANGUAGE : $isolanguage) . "\">\n";
}
$STYLESHEET = $FILE.".css" unless $STYLESHEET;
if (!$charset && $CHARSET) { $charset = $CHARSET; $charset =~ s/_/\-/go; }
join('', ($DOCTYPE ? $DTDcomment : '' )
,"<html>\n<head>\n<title>", $title, "</title>\n"
, &meta_information($title)
, ($CHARSET && $HTML_VERSION ge "2.1" ?
"<meta http-equiv=\"Content-Type\" content=\"text/html; charset=$charset\">\n"
: "" )
, ($BASE ? "<base href=\"$BASE\">\n" : "" )
, "<link rel=\"STYLESHEET\" href=\"$STYLESHEET\">"
, $more_links_mark
, "\n</head>\n<body $body>\n");
}
1; # This must be the last line
Reference in New Issue View Git Blame Copy Permalink