cpython/Lib/subprocess.py

2143 lines
83 KiB
Python

# subprocess - Subprocesses with accessible I/O streams
#
# For more information about this module, see PEP 324.
#
# Copyright (c) 2003-2005 by Peter Astrand <astrand@lysator.liu.se>
#
# Licensed to PSF under a Contributor Agreement.
r"""Subprocesses with accessible I/O streams
This module allows you to spawn processes, connect to their
input/output/error pipes, and obtain their return codes.
For a complete description of this module see the Python documentation.
Main API
========
run(...): Runs a command, waits for it to complete, then returns a
CompletedProcess instance.
Popen(...): A class for flexibly executing a command in a new process
Constants
---------
DEVNULL: Special value that indicates that os.devnull should be used
PIPE: Special value that indicates a pipe should be created
STDOUT: Special value that indicates that stderr should go to stdout
Older API
=========
call(...): Runs a command, waits for it to complete, then returns
the return code.
check_call(...): Same as call() but raises CalledProcessError()
if return code is not 0
check_output(...): Same as check_call() but returns the contents of
stdout instead of a return code
getoutput(...): Runs a command in the shell, waits for it to complete,
then returns the output
getstatusoutput(...): Runs a command in the shell, waits for it to complete,
then returns a (exitcode, output) tuple
"""
import builtins
import errno
import io
import locale
import os
import time
import signal
import sys
import threading
import warnings
import contextlib
from time import monotonic as _time
import types
try:
import fcntl
except ImportError:
fcntl = None
__all__ = ["Popen", "PIPE", "STDOUT", "call", "check_call", "getstatusoutput",
"getoutput", "check_output", "run", "CalledProcessError", "DEVNULL",
"SubprocessError", "TimeoutExpired", "CompletedProcess"]
# NOTE: We intentionally exclude list2cmdline as it is
# considered an internal implementation detail. issue10838.
# use presence of msvcrt to detect Windows-like platforms (see bpo-8110)
try:
import msvcrt
except ModuleNotFoundError:
_mswindows = False
else:
_mswindows = True
if _mswindows:
import _winapi
from _winapi import (CREATE_NEW_CONSOLE, CREATE_NEW_PROCESS_GROUP,
STD_INPUT_HANDLE, STD_OUTPUT_HANDLE,
STD_ERROR_HANDLE, SW_HIDE,
STARTF_USESTDHANDLES, STARTF_USESHOWWINDOW,
ABOVE_NORMAL_PRIORITY_CLASS, BELOW_NORMAL_PRIORITY_CLASS,
HIGH_PRIORITY_CLASS, IDLE_PRIORITY_CLASS,
NORMAL_PRIORITY_CLASS, REALTIME_PRIORITY_CLASS,
CREATE_NO_WINDOW, DETACHED_PROCESS,
CREATE_DEFAULT_ERROR_MODE, CREATE_BREAKAWAY_FROM_JOB)
__all__.extend(["CREATE_NEW_CONSOLE", "CREATE_NEW_PROCESS_GROUP",
"STD_INPUT_HANDLE", "STD_OUTPUT_HANDLE",
"STD_ERROR_HANDLE", "SW_HIDE",
"STARTF_USESTDHANDLES", "STARTF_USESHOWWINDOW",
"STARTUPINFO",
"ABOVE_NORMAL_PRIORITY_CLASS", "BELOW_NORMAL_PRIORITY_CLASS",
"HIGH_PRIORITY_CLASS", "IDLE_PRIORITY_CLASS",
"NORMAL_PRIORITY_CLASS", "REALTIME_PRIORITY_CLASS",
"CREATE_NO_WINDOW", "DETACHED_PROCESS",
"CREATE_DEFAULT_ERROR_MODE", "CREATE_BREAKAWAY_FROM_JOB"])
else:
if sys.platform in {"emscripten", "wasi"}:
def _fork_exec(*args, **kwargs):
raise OSError(
errno.ENOTSUP, f"{sys.platform} does not support processes."
)
else:
from _posixsubprocess import fork_exec as _fork_exec
import select
import selectors
# Exception classes used by this module.
class SubprocessError(Exception): pass
class CalledProcessError(SubprocessError):
"""Raised when run() is called with check=True and the process
returns a non-zero exit status.
Attributes:
cmd, returncode, stdout, stderr, output
"""
def __init__(self, returncode, cmd, output=None, stderr=None):
self.returncode = returncode
self.cmd = cmd
self.output = output
self.stderr = stderr
def __str__(self):
if self.returncode and self.returncode < 0:
try:
return "Command '%s' died with %r." % (
self.cmd, signal.Signals(-self.returncode))
except ValueError:
return "Command '%s' died with unknown signal %d." % (
self.cmd, -self.returncode)
else:
return "Command '%s' returned non-zero exit status %d." % (
self.cmd, self.returncode)
@property
def stdout(self):
"""Alias for output attribute, to match stderr"""
return self.output
@stdout.setter
def stdout(self, value):
# There's no obvious reason to set this, but allow it anyway so
# .stdout is a transparent alias for .output
self.output = value
class TimeoutExpired(SubprocessError):
"""This exception is raised when the timeout expires while waiting for a
child process.
Attributes:
cmd, output, stdout, stderr, timeout
"""
def __init__(self, cmd, timeout, output=None, stderr=None):
self.cmd = cmd
self.timeout = timeout
self.output = output
self.stderr = stderr
def __str__(self):
return ("Command '%s' timed out after %s seconds" %
(self.cmd, self.timeout))
@property
def stdout(self):
return self.output
@stdout.setter
def stdout(self, value):
# There's no obvious reason to set this, but allow it anyway so
# .stdout is a transparent alias for .output
self.output = value
if _mswindows:
class STARTUPINFO:
def __init__(self, *, dwFlags=0, hStdInput=None, hStdOutput=None,
hStdError=None, wShowWindow=0, lpAttributeList=None):
self.dwFlags = dwFlags
self.hStdInput = hStdInput
self.hStdOutput = hStdOutput
self.hStdError = hStdError
self.wShowWindow = wShowWindow
self.lpAttributeList = lpAttributeList or {"handle_list": []}
def copy(self):
attr_list = self.lpAttributeList.copy()
if 'handle_list' in attr_list:
attr_list['handle_list'] = list(attr_list['handle_list'])
return STARTUPINFO(dwFlags=self.dwFlags,
hStdInput=self.hStdInput,
hStdOutput=self.hStdOutput,
hStdError=self.hStdError,
wShowWindow=self.wShowWindow,
lpAttributeList=attr_list)
class Handle(int):
closed = False
def Close(self, CloseHandle=_winapi.CloseHandle):
if not self.closed:
self.closed = True
CloseHandle(self)
def Detach(self):
if not self.closed:
self.closed = True
return int(self)
raise ValueError("already closed")
def __repr__(self):
return "%s(%d)" % (self.__class__.__name__, int(self))
__del__ = Close
else:
# When select or poll has indicated that the file is writable,
# we can write up to _PIPE_BUF bytes without risk of blocking.
# POSIX defines PIPE_BUF as >= 512.
_PIPE_BUF = getattr(select, 'PIPE_BUF', 512)
# poll/select have the advantage of not requiring any extra file
# descriptor, contrarily to epoll/kqueue (also, they require a single
# syscall).
if hasattr(selectors, 'PollSelector'):
_PopenSelector = selectors.PollSelector
else:
_PopenSelector = selectors.SelectSelector
if _mswindows:
# On Windows we just need to close `Popen._handle` when we no longer need
# it, so that the kernel can free it. `Popen._handle` gets closed
# implicitly when the `Popen` instance is finalized (see `Handle.__del__`,
# which is calling `CloseHandle` as requested in [1]), so there is nothing
# for `_cleanup` to do.
#
# [1] https://docs.microsoft.com/en-us/windows/desktop/ProcThread/
# creating-processes
_active = None
def _cleanup():
pass
else:
# This lists holds Popen instances for which the underlying process had not
# exited at the time its __del__ method got called: those processes are
# wait()ed for synchronously from _cleanup() when a new Popen object is
# created, to avoid zombie processes.
_active = []
def _cleanup():
if _active is None:
return
for inst in _active[:]:
res = inst._internal_poll(_deadstate=sys.maxsize)
if res is not None:
try:
_active.remove(inst)
except ValueError:
# This can happen if two threads create a new Popen instance.
# It's harmless that it was already removed, so ignore.
pass
PIPE = -1
STDOUT = -2
DEVNULL = -3
# XXX This function is only used by multiprocessing and the test suite,
# but it's here so that it can be imported when Python is compiled without
# threads.
def _optim_args_from_interpreter_flags():
"""Return a list of command-line arguments reproducing the current
optimization settings in sys.flags."""
args = []
value = sys.flags.optimize
if value > 0:
args.append('-' + 'O' * value)
return args
def _args_from_interpreter_flags():
"""Return a list of command-line arguments reproducing the current
settings in sys.flags, sys.warnoptions and sys._xoptions."""
flag_opt_map = {
'debug': 'd',
# 'inspect': 'i',
# 'interactive': 'i',
'dont_write_bytecode': 'B',
'no_site': 'S',
'verbose': 'v',
'bytes_warning': 'b',
'quiet': 'q',
# -O is handled in _optim_args_from_interpreter_flags()
}
args = _optim_args_from_interpreter_flags()
for flag, opt in flag_opt_map.items():
v = getattr(sys.flags, flag)
if v > 0:
args.append('-' + opt * v)
if sys.flags.isolated:
args.append('-I')
else:
if sys.flags.ignore_environment:
args.append('-E')
if sys.flags.no_user_site:
args.append('-s')
if sys.flags.safe_path:
args.append('-P')
# -W options
warnopts = sys.warnoptions[:]
xoptions = getattr(sys, '_xoptions', {})
bytes_warning = sys.flags.bytes_warning
dev_mode = sys.flags.dev_mode
if bytes_warning > 1:
warnopts.remove("error::BytesWarning")
elif bytes_warning:
warnopts.remove("default::BytesWarning")
if dev_mode:
warnopts.remove('default')
for opt in warnopts:
args.append('-W' + opt)
# -X options
if dev_mode:
args.extend(('-X', 'dev'))
for opt in ('faulthandler', 'tracemalloc', 'importtime',
'showrefcount', 'utf8'):
if opt in xoptions:
value = xoptions[opt]
if value is True:
arg = opt
else:
arg = '%s=%s' % (opt, value)
args.extend(('-X', arg))
return args
def _text_encoding():
# Return default text encoding and emit EncodingWarning if
# sys.flags.warn_default_encoding is true.
if sys.flags.warn_default_encoding:
f = sys._getframe()
filename = f.f_code.co_filename
stacklevel = 2
while f := f.f_back:
if f.f_code.co_filename != filename:
break
stacklevel += 1
warnings.warn("'encoding' argument not specified.",
EncodingWarning, stacklevel)
if sys.flags.utf8_mode:
return "utf-8"
else:
return locale.getencoding()
def call(*popenargs, timeout=None, **kwargs):
"""Run command with arguments. Wait for command to complete or
timeout, then return the returncode attribute.
The arguments are the same as for the Popen constructor. Example:
retcode = call(["ls", "-l"])
"""
with Popen(*popenargs, **kwargs) as p:
try:
return p.wait(timeout=timeout)
except: # Including KeyboardInterrupt, wait handled that.
p.kill()
# We don't call p.wait() again as p.__exit__ does that for us.
raise
def check_call(*popenargs, **kwargs):
"""Run command with arguments. Wait for command to complete. If
the exit code was zero then return, otherwise raise
CalledProcessError. The CalledProcessError object will have the
return code in the returncode attribute.
The arguments are the same as for the call function. Example:
check_call(["ls", "-l"])
"""
retcode = call(*popenargs, **kwargs)
if retcode:
cmd = kwargs.get("args")
if cmd is None:
cmd = popenargs[0]
raise CalledProcessError(retcode, cmd)
return 0
def check_output(*popenargs, timeout=None, **kwargs):
r"""Run command with arguments and return its output.
If the exit code was non-zero it raises a CalledProcessError. The
CalledProcessError object will have the return code in the returncode
attribute and output in the output attribute.
The arguments are the same as for the Popen constructor. Example:
>>> check_output(["ls", "-l", "/dev/null"])
b'crw-rw-rw- 1 root root 1, 3 Oct 18 2007 /dev/null\n'
The stdout argument is not allowed as it is used internally.
To capture standard error in the result, use stderr=STDOUT.
>>> check_output(["/bin/sh", "-c",
... "ls -l non_existent_file ; exit 0"],
... stderr=STDOUT)
b'ls: non_existent_file: No such file or directory\n'
There is an additional optional argument, "input", allowing you to
pass a string to the subprocess's stdin. If you use this argument
you may not also use the Popen constructor's "stdin" argument, as
it too will be used internally. Example:
>>> check_output(["sed", "-e", "s/foo/bar/"],
... input=b"when in the course of fooman events\n")
b'when in the course of barman events\n'
By default, all communication is in bytes, and therefore any "input"
should be bytes, and the return value will be bytes. If in text mode,
any "input" should be a string, and the return value will be a string
decoded according to locale encoding, or by "encoding" if set. Text mode
is triggered by setting any of text, encoding, errors or universal_newlines.
"""
for kw in ('stdout', 'check'):
if kw in kwargs:
raise ValueError(f'{kw} argument not allowed, it will be overridden.')
if 'input' in kwargs and kwargs['input'] is None:
# Explicitly passing input=None was previously equivalent to passing an
# empty string. That is maintained here for backwards compatibility.
if kwargs.get('universal_newlines') or kwargs.get('text'):
empty = ''
else:
empty = b''
kwargs['input'] = empty
return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
**kwargs).stdout
class CompletedProcess(object):
"""A process that has finished running.
This is returned by run().
Attributes:
args: The list or str args passed to run().
returncode: The exit code of the process, negative for signals.
stdout: The standard output (None if not captured).
stderr: The standard error (None if not captured).
"""
def __init__(self, args, returncode, stdout=None, stderr=None):
self.args = args
self.returncode = returncode
self.stdout = stdout
self.stderr = stderr
def __repr__(self):
args = ['args={!r}'.format(self.args),
'returncode={!r}'.format(self.returncode)]
if self.stdout is not None:
args.append('stdout={!r}'.format(self.stdout))
if self.stderr is not None:
args.append('stderr={!r}'.format(self.stderr))
return "{}({})".format(type(self).__name__, ', '.join(args))
__class_getitem__ = classmethod(types.GenericAlias)
def check_returncode(self):
"""Raise CalledProcessError if the exit code is non-zero."""
if self.returncode:
raise CalledProcessError(self.returncode, self.args, self.stdout,
self.stderr)
def run(*popenargs,
input=None, capture_output=False, timeout=None, check=False, **kwargs):
"""Run command with arguments and return a CompletedProcess instance.
The returned instance will have attributes args, returncode, stdout and
stderr. By default, stdout and stderr are not captured, and those attributes
will be None. Pass stdout=PIPE and/or stderr=PIPE in order to capture them.
If check is True and the exit code was non-zero, it raises a
CalledProcessError. The CalledProcessError object will have the return code
in the returncode attribute, and output & stderr attributes if those streams
were captured.
If timeout is given, and the process takes too long, a TimeoutExpired
exception will be raised.
There is an optional argument "input", allowing you to
pass bytes or a string to the subprocess's stdin. If you use this argument
you may not also use the Popen constructor's "stdin" argument, as
it will be used internally.
By default, all communication is in bytes, and therefore any "input" should
be bytes, and the stdout and stderr will be bytes. If in text mode, any
"input" should be a string, and stdout and stderr will be strings decoded
according to locale encoding, or by "encoding" if set. Text mode is
triggered by setting any of text, encoding, errors or universal_newlines.
The other arguments are the same as for the Popen constructor.
"""
if input is not None:
if kwargs.get('stdin') is not None:
raise ValueError('stdin and input arguments may not both be used.')
kwargs['stdin'] = PIPE
if capture_output:
if kwargs.get('stdout') is not None or kwargs.get('stderr') is not None:
raise ValueError('stdout and stderr arguments may not be used '
'with capture_output.')
kwargs['stdout'] = PIPE
kwargs['stderr'] = PIPE
with Popen(*popenargs, **kwargs) as process:
try:
stdout, stderr = process.communicate(input, timeout=timeout)
except TimeoutExpired as exc:
process.kill()
if _mswindows:
# Windows accumulates the output in a single blocking
# read() call run on child threads, with the timeout
# being done in a join() on those threads. communicate()
# _after_ kill() is required to collect that and add it
# to the exception.
exc.stdout, exc.stderr = process.communicate()
else:
# POSIX _communicate already populated the output so
# far into the TimeoutExpired exception.
process.wait()
raise
except: # Including KeyboardInterrupt, communicate handled that.
process.kill()
# We don't call process.wait() as .__exit__ does that for us.
raise
retcode = process.poll()
if check and retcode:
raise CalledProcessError(retcode, process.args,
output=stdout, stderr=stderr)
return CompletedProcess(process.args, retcode, stdout, stderr)
def list2cmdline(seq):
"""
Translate a sequence of arguments into a command line
string, using the same rules as the MS C runtime:
1) Arguments are delimited by white space, which is either a
space or a tab.
2) A string surrounded by double quotation marks is
interpreted as a single argument, regardless of white space
contained within. A quoted string can be embedded in an
argument.
3) A double quotation mark preceded by a backslash is
interpreted as a literal double quotation mark.
4) Backslashes are interpreted literally, unless they
immediately precede a double quotation mark.
5) If backslashes immediately precede a double quotation mark,
every pair of backslashes is interpreted as a literal
backslash. If the number of backslashes is odd, the last
backslash escapes the next double quotation mark as
described in rule 3.
"""
# See
# http://msdn.microsoft.com/en-us/library/17w5ykft.aspx
# or search http://msdn.microsoft.com for
# "Parsing C++ Command-Line Arguments"
result = []
needquote = False
for arg in map(os.fsdecode, seq):
bs_buf = []
# Add a space to separate this argument from the others
if result:
result.append(' ')
needquote = (" " in arg) or ("\t" in arg) or not arg
if needquote:
result.append('"')
for c in arg:
if c == '\\':
# Don't know if we need to double yet.
bs_buf.append(c)
elif c == '"':
# Double backslashes.
result.append('\\' * len(bs_buf)*2)
bs_buf = []
result.append('\\"')
else:
# Normal char
if bs_buf:
result.extend(bs_buf)
bs_buf = []
result.append(c)
# Add remaining backslashes, if any.
if bs_buf:
result.extend(bs_buf)
if needquote:
result.extend(bs_buf)
result.append('"')
return ''.join(result)
# Various tools for executing commands and looking at their output and status.
#
def getstatusoutput(cmd, *, encoding=None, errors=None):
"""Return (exitcode, output) of executing cmd in a shell.
Execute the string 'cmd' in a shell with 'check_output' and
return a 2-tuple (status, output). The locale encoding is used
to decode the output and process newlines.
A trailing newline is stripped from the output.
The exit status for the command can be interpreted
according to the rules for the function 'wait'. Example:
>>> import subprocess
>>> subprocess.getstatusoutput('ls /bin/ls')
(0, '/bin/ls')
>>> subprocess.getstatusoutput('cat /bin/junk')
(1, 'cat: /bin/junk: No such file or directory')
>>> subprocess.getstatusoutput('/bin/junk')
(127, 'sh: /bin/junk: not found')
>>> subprocess.getstatusoutput('/bin/kill $$')
(-15, '')
"""
try:
data = check_output(cmd, shell=True, text=True, stderr=STDOUT,
encoding=encoding, errors=errors)
exitcode = 0
except CalledProcessError as ex:
data = ex.output
exitcode = ex.returncode
if data[-1:] == '\n':
data = data[:-1]
return exitcode, data
def getoutput(cmd, *, encoding=None, errors=None):
"""Return output (stdout or stderr) of executing cmd in a shell.
Like getstatusoutput(), except the exit status is ignored and the return
value is a string containing the command's output. Example:
>>> import subprocess
>>> subprocess.getoutput('ls /bin/ls')
'/bin/ls'
"""
return getstatusoutput(cmd, encoding=encoding, errors=errors)[1]
def _use_posix_spawn():
"""Check if posix_spawn() can be used for subprocess.
subprocess requires a posix_spawn() implementation that properly reports
errors to the parent process, & sets errno on the following failures:
* Process attribute actions failed.
* File actions failed.
* exec() failed.
Prefer an implementation which can use vfork() in some cases for best
performance.
"""
if _mswindows or not hasattr(os, 'posix_spawn'):
# os.posix_spawn() is not available
return False
if sys.platform in ('darwin', 'sunos5'):
# posix_spawn() is a syscall on both macOS and Solaris,
# and properly reports errors
return True
# Check libc name and runtime libc version
try:
ver = os.confstr('CS_GNU_LIBC_VERSION')
# parse 'glibc 2.28' as ('glibc', (2, 28))
parts = ver.split(maxsplit=1)
if len(parts) != 2:
# reject unknown format
raise ValueError
libc = parts[0]
version = tuple(map(int, parts[1].split('.')))
if sys.platform == 'linux' and libc == 'glibc' and version >= (2, 24):
# glibc 2.24 has a new Linux posix_spawn implementation using vfork
# which properly reports errors to the parent process.
return True
# Note: Don't use the implementation in earlier glibc because it doesn't
# use vfork (even if glibc 2.26 added a pipe to properly report errors
# to the parent process).
except (AttributeError, ValueError, OSError):
# os.confstr() or CS_GNU_LIBC_VERSION value not available
pass
# By default, assume that posix_spawn() does not properly report errors.
return False
# These are primarily fail-safe knobs for negatives. A True value does not
# guarantee the given libc/syscall API will be used.
_USE_POSIX_SPAWN = _use_posix_spawn()
_USE_VFORK = True
class Popen:
""" Execute a child program in a new process.
For a complete description of the arguments see the Python documentation.
Arguments:
args: A string, or a sequence of program arguments.
bufsize: supplied as the buffering argument to the open() function when
creating the stdin/stdout/stderr pipe file objects
executable: A replacement program to execute.
stdin, stdout and stderr: These specify the executed programs' standard
input, standard output and standard error file handles, respectively.
preexec_fn: (POSIX only) An object to be called in the child process
just before the child is executed.
close_fds: Controls closing or inheriting of file descriptors.
shell: If true, the command will be executed through the shell.
cwd: Sets the current directory before the child is executed.
env: Defines the environment variables for the new process.
text: If true, decode stdin, stdout and stderr using the given encoding
(if set) or the system default otherwise.
universal_newlines: Alias of text, provided for backwards compatibility.
startupinfo and creationflags (Windows only)
restore_signals (POSIX only)
start_new_session (POSIX only)
process_group (POSIX only)
group (POSIX only)
extra_groups (POSIX only)
user (POSIX only)
umask (POSIX only)
pass_fds (POSIX only)
encoding and errors: Text mode encoding and error handling to use for
file objects stdin, stdout and stderr.
Attributes:
stdin, stdout, stderr, pid, returncode
"""
_child_created = False # Set here since __del__ checks it
def __init__(self, args, bufsize=-1, executable=None,
stdin=None, stdout=None, stderr=None,
preexec_fn=None, close_fds=True,
shell=False, cwd=None, env=None, universal_newlines=None,
startupinfo=None, creationflags=0,
restore_signals=True, start_new_session=False,
pass_fds=(), *, user=None, group=None, extra_groups=None,
encoding=None, errors=None, text=None, umask=-1, pipesize=-1,
process_group=None):
"""Create new Popen instance."""
_cleanup()
# Held while anything is calling waitpid before returncode has been
# updated to prevent clobbering returncode if wait() or poll() are
# called from multiple threads at once. After acquiring the lock,
# code must re-check self.returncode to see if another thread just
# finished a waitpid() call.
self._waitpid_lock = threading.Lock()
self._input = None
self._communication_started = False
if bufsize is None:
bufsize = -1 # Restore default
if not isinstance(bufsize, int):
raise TypeError("bufsize must be an integer")
if pipesize is None:
pipesize = -1 # Restore default
if not isinstance(pipesize, int):
raise TypeError("pipesize must be an integer")
if _mswindows:
if preexec_fn is not None:
raise ValueError("preexec_fn is not supported on Windows "
"platforms")
else:
# POSIX
if pass_fds and not close_fds:
warnings.warn("pass_fds overriding close_fds.", RuntimeWarning)
close_fds = True
if startupinfo is not None:
raise ValueError("startupinfo is only supported on Windows "
"platforms")
if creationflags != 0:
raise ValueError("creationflags is only supported on Windows "
"platforms")
self.args = args
self.stdin = None
self.stdout = None
self.stderr = None
self.pid = None
self.returncode = None
self.encoding = encoding
self.errors = errors
self.pipesize = pipesize
# Validate the combinations of text and universal_newlines
if (text is not None and universal_newlines is not None
and bool(universal_newlines) != bool(text)):
raise SubprocessError('Cannot disambiguate when both text '
'and universal_newlines are supplied but '
'different. Pass one or the other.')
# Input and output objects. The general principle is like
# this:
#
# Parent Child
# ------ -----
# p2cwrite ---stdin---> p2cread
# c2pread <--stdout--- c2pwrite
# errread <--stderr--- errwrite
#
# On POSIX, the child objects are file descriptors. On
# Windows, these are Windows file handles. The parent objects
# are file descriptors on both platforms. The parent objects
# are -1 when not using PIPEs. The child objects are -1
# when not redirecting.
(p2cread, p2cwrite,
c2pread, c2pwrite,
errread, errwrite) = self._get_handles(stdin, stdout, stderr)
# We wrap OS handles *before* launching the child, otherwise a
# quickly terminating child could make our fds unwrappable
# (see #8458).
if _mswindows:
if p2cwrite != -1:
p2cwrite = msvcrt.open_osfhandle(p2cwrite.Detach(), 0)
if c2pread != -1:
c2pread = msvcrt.open_osfhandle(c2pread.Detach(), 0)
if errread != -1:
errread = msvcrt.open_osfhandle(errread.Detach(), 0)
self.text_mode = encoding or errors or text or universal_newlines
if self.text_mode and encoding is None:
self.encoding = encoding = _text_encoding()
# How long to resume waiting on a child after the first ^C.
# There is no right value for this. The purpose is to be polite
# yet remain good for interactive users trying to exit a tool.
self._sigint_wait_secs = 0.25 # 1/xkcd221.getRandomNumber()
self._closed_child_pipe_fds = False
if self.text_mode:
if bufsize == 1:
line_buffering = True
# Use the default buffer size for the underlying binary streams
# since they don't support line buffering.
bufsize = -1
else:
line_buffering = False
if process_group is None:
process_group = -1 # The internal APIs are int-only
gid = None
if group is not None:
if not hasattr(os, 'setregid'):
raise ValueError("The 'group' parameter is not supported on the "
"current platform")
elif isinstance(group, str):
try:
import grp
except ImportError:
raise ValueError("The group parameter cannot be a string "
"on systems without the grp module")
gid = grp.getgrnam(group).gr_gid
elif isinstance(group, int):
gid = group
else:
raise TypeError("Group must be a string or an integer, not {}"
.format(type(group)))
if gid < 0:
raise ValueError(f"Group ID cannot be negative, got {gid}")
gids = None
if extra_groups is not None:
if not hasattr(os, 'setgroups'):
raise ValueError("The 'extra_groups' parameter is not "
"supported on the current platform")
elif isinstance(extra_groups, str):
raise ValueError("Groups must be a list, not a string")
gids = []
for extra_group in extra_groups:
if isinstance(extra_group, str):
try:
import grp
except ImportError:
raise ValueError("Items in extra_groups cannot be "
"strings on systems without the "
"grp module")
gids.append(grp.getgrnam(extra_group).gr_gid)
elif isinstance(extra_group, int):
gids.append(extra_group)
else:
raise TypeError("Items in extra_groups must be a string "
"or integer, not {}"
.format(type(extra_group)))
# make sure that the gids are all positive here so we can do less
# checking in the C code
for gid_check in gids:
if gid_check < 0:
raise ValueError(f"Group ID cannot be negative, got {gid_check}")
uid = None
if user is not None:
if not hasattr(os, 'setreuid'):
raise ValueError("The 'user' parameter is not supported on "
"the current platform")
elif isinstance(user, str):
try:
import pwd
except ImportError:
raise ValueError("The user parameter cannot be a string "
"on systems without the pwd module")
uid = pwd.getpwnam(user).pw_uid
elif isinstance(user, int):
uid = user
else:
raise TypeError("User must be a string or an integer")
if uid < 0:
raise ValueError(f"User ID cannot be negative, got {uid}")
try:
if p2cwrite != -1:
self.stdin = io.open(p2cwrite, 'wb', bufsize)
if self.text_mode:
self.stdin = io.TextIOWrapper(self.stdin, write_through=True,
line_buffering=line_buffering,
encoding=encoding, errors=errors)
if c2pread != -1:
self.stdout = io.open(c2pread, 'rb', bufsize)
if self.text_mode:
self.stdout = io.TextIOWrapper(self.stdout,
encoding=encoding, errors=errors)
if errread != -1:
self.stderr = io.open(errread, 'rb', bufsize)
if self.text_mode:
self.stderr = io.TextIOWrapper(self.stderr,
encoding=encoding, errors=errors)
self._execute_child(args, executable, preexec_fn, close_fds,
pass_fds, cwd, env,
startupinfo, creationflags, shell,
p2cread, p2cwrite,
c2pread, c2pwrite,
errread, errwrite,
restore_signals,
gid, gids, uid, umask,
start_new_session, process_group)
except:
# Cleanup if the child failed starting.
for f in filter(None, (self.stdin, self.stdout, self.stderr)):
try:
f.close()
except OSError:
pass # Ignore EBADF or other errors.
if not self._closed_child_pipe_fds:
to_close = []
if stdin == PIPE:
to_close.append(p2cread)
if stdout == PIPE:
to_close.append(c2pwrite)
if stderr == PIPE:
to_close.append(errwrite)
if hasattr(self, '_devnull'):
to_close.append(self._devnull)
for fd in to_close:
try:
if _mswindows and isinstance(fd, Handle):
fd.Close()
else:
os.close(fd)
except OSError:
pass
raise
def __repr__(self):
obj_repr = (
f"<{self.__class__.__name__}: "
f"returncode: {self.returncode} args: {self.args!r}>"
)
if len(obj_repr) > 80:
obj_repr = obj_repr[:76] + "...>"
return obj_repr
__class_getitem__ = classmethod(types.GenericAlias)
@property
def universal_newlines(self):
# universal_newlines as retained as an alias of text_mode for API
# compatibility. bpo-31756
return self.text_mode
@universal_newlines.setter
def universal_newlines(self, universal_newlines):
self.text_mode = bool(universal_newlines)
def _translate_newlines(self, data, encoding, errors):
data = data.decode(encoding, errors)
return data.replace("\r\n", "\n").replace("\r", "\n")
def __enter__(self):
return self
def __exit__(self, exc_type, value, traceback):
if self.stdout:
self.stdout.close()
if self.stderr:
self.stderr.close()
try: # Flushing a BufferedWriter may raise an error
if self.stdin:
self.stdin.close()
finally:
if exc_type == KeyboardInterrupt:
# https://bugs.python.org/issue25942
# In the case of a KeyboardInterrupt we assume the SIGINT
# was also already sent to our child processes. We can't
# block indefinitely as that is not user friendly.
# If we have not already waited a brief amount of time in
# an interrupted .wait() or .communicate() call, do so here
# for consistency.
if self._sigint_wait_secs > 0:
try:
self._wait(timeout=self._sigint_wait_secs)
except TimeoutExpired:
pass
self._sigint_wait_secs = 0 # Note that this has been done.
return # resume the KeyboardInterrupt
# Wait for the process to terminate, to avoid zombies.
self.wait()
def __del__(self, _maxsize=sys.maxsize, _warn=warnings.warn):
if not self._child_created:
# We didn't get to successfully create a child process.
return
if self.returncode is None:
# Not reading subprocess exit status creates a zombie process which
# is only destroyed at the parent python process exit
_warn("subprocess %s is still running" % self.pid,
ResourceWarning, source=self)
# In case the child hasn't been waited on, check if it's done.
self._internal_poll(_deadstate=_maxsize)
if self.returncode is None and _active is not None:
# Child is still running, keep us alive until we can wait on it.
_active.append(self)
def _get_devnull(self):
if not hasattr(self, '_devnull'):
self._devnull = os.open(os.devnull, os.O_RDWR)
return self._devnull
def _stdin_write(self, input):
if input:
try:
self.stdin.write(input)
except BrokenPipeError:
pass # communicate() must ignore broken pipe errors.
except OSError as exc:
if exc.errno == errno.EINVAL:
# bpo-19612, bpo-30418: On Windows, stdin.write() fails
# with EINVAL if the child process exited or if the child
# process is still running but closed the pipe.
pass
else:
raise
try:
self.stdin.close()
except BrokenPipeError:
pass # communicate() must ignore broken pipe errors.
except OSError as exc:
if exc.errno == errno.EINVAL:
pass
else:
raise
def communicate(self, input=None, timeout=None):
"""Interact with process: Send data to stdin and close it.
Read data from stdout and stderr, until end-of-file is
reached. Wait for process to terminate.
The optional "input" argument should be data to be sent to the
child process, or None, if no data should be sent to the child.
communicate() returns a tuple (stdout, stderr).
By default, all communication is in bytes, and therefore any
"input" should be bytes, and the (stdout, stderr) will be bytes.
If in text mode (indicated by self.text_mode), any "input" should
be a string, and (stdout, stderr) will be strings decoded
according to locale encoding, or by "encoding" if set. Text mode
is triggered by setting any of text, encoding, errors or
universal_newlines.
"""
if self._communication_started and input:
raise ValueError("Cannot send input after starting communication")
# Optimization: If we are not worried about timeouts, we haven't
# started communicating, and we have one or zero pipes, using select()
# or threads is unnecessary.
if (timeout is None and not self._communication_started and
[self.stdin, self.stdout, self.stderr].count(None) >= 2):
stdout = None
stderr = None
if self.stdin:
self._stdin_write(input)
elif self.stdout:
stdout = self.stdout.read()
self.stdout.close()
elif self.stderr:
stderr = self.stderr.read()
self.stderr.close()
self.wait()
else:
if timeout is not None:
endtime = _time() + timeout
else:
endtime = None
try:
stdout, stderr = self._communicate(input, endtime, timeout)
except KeyboardInterrupt:
# https://bugs.python.org/issue25942
# See the detailed comment in .wait().
if timeout is not None:
sigint_timeout = min(self._sigint_wait_secs,
self._remaining_time(endtime))
else:
sigint_timeout = self._sigint_wait_secs
self._sigint_wait_secs = 0 # nothing else should wait.
try:
self._wait(timeout=sigint_timeout)
except TimeoutExpired:
pass
raise # resume the KeyboardInterrupt
finally:
self._communication_started = True
sts = self.wait(timeout=self._remaining_time(endtime))
return (stdout, stderr)
def poll(self):
"""Check if child process has terminated. Set and return returncode
attribute."""
return self._internal_poll()
def _remaining_time(self, endtime):
"""Convenience for _communicate when computing timeouts."""
if endtime is None:
return None
else:
return endtime - _time()
def _check_timeout(self, endtime, orig_timeout, stdout_seq, stderr_seq,
skip_check_and_raise=False):
"""Convenience for checking if a timeout has expired."""
if endtime is None:
return
if skip_check_and_raise or _time() > endtime:
raise TimeoutExpired(
self.args, orig_timeout,
output=b''.join(stdout_seq) if stdout_seq else None,
stderr=b''.join(stderr_seq) if stderr_seq else None)
def wait(self, timeout=None):
"""Wait for child process to terminate; returns self.returncode."""
if timeout is not None:
endtime = _time() + timeout
try:
return self._wait(timeout=timeout)
except KeyboardInterrupt:
# https://bugs.python.org/issue25942
# The first keyboard interrupt waits briefly for the child to
# exit under the common assumption that it also received the ^C
# generated SIGINT and will exit rapidly.
if timeout is not None:
sigint_timeout = min(self._sigint_wait_secs,
self._remaining_time(endtime))
else:
sigint_timeout = self._sigint_wait_secs
self._sigint_wait_secs = 0 # nothing else should wait.
try:
self._wait(timeout=sigint_timeout)
except TimeoutExpired:
pass
raise # resume the KeyboardInterrupt
def _close_pipe_fds(self,
p2cread, p2cwrite,
c2pread, c2pwrite,
errread, errwrite):
# self._devnull is not always defined.
devnull_fd = getattr(self, '_devnull', None)
with contextlib.ExitStack() as stack:
if _mswindows:
if p2cread != -1:
stack.callback(p2cread.Close)
if c2pwrite != -1:
stack.callback(c2pwrite.Close)
if errwrite != -1:
stack.callback(errwrite.Close)
else:
if p2cread != -1 and p2cwrite != -1 and p2cread != devnull_fd:
stack.callback(os.close, p2cread)
if c2pwrite != -1 and c2pread != -1 and c2pwrite != devnull_fd:
stack.callback(os.close, c2pwrite)
if errwrite != -1 and errread != -1 and errwrite != devnull_fd:
stack.callback(os.close, errwrite)
if devnull_fd is not None:
stack.callback(os.close, devnull_fd)
# Prevent a double close of these handles/fds from __init__ on error.
self._closed_child_pipe_fds = True
if _mswindows:
#
# Windows methods
#
def _get_handles(self, stdin, stdout, stderr):
"""Construct and return tuple with IO objects:
p2cread, p2cwrite, c2pread, c2pwrite, errread, errwrite
"""
if stdin is None and stdout is None and stderr is None:
return (-1, -1, -1, -1, -1, -1)
p2cread, p2cwrite = -1, -1
c2pread, c2pwrite = -1, -1
errread, errwrite = -1, -1
if stdin is None:
p2cread = _winapi.GetStdHandle(_winapi.STD_INPUT_HANDLE)
if p2cread is None:
p2cread, _ = _winapi.CreatePipe(None, 0)
p2cread = Handle(p2cread)
_winapi.CloseHandle(_)
elif stdin == PIPE:
p2cread, p2cwrite = _winapi.CreatePipe(None, 0)
p2cread, p2cwrite = Handle(p2cread), Handle(p2cwrite)
elif stdin == DEVNULL:
p2cread = msvcrt.get_osfhandle(self._get_devnull())
elif isinstance(stdin, int):
p2cread = msvcrt.get_osfhandle(stdin)
else:
# Assuming file-like object
p2cread = msvcrt.get_osfhandle(stdin.fileno())
p2cread = self._make_inheritable(p2cread)
if stdout is None:
c2pwrite = _winapi.GetStdHandle(_winapi.STD_OUTPUT_HANDLE)
if c2pwrite is None:
_, c2pwrite = _winapi.CreatePipe(None, 0)
c2pwrite = Handle(c2pwrite)
_winapi.CloseHandle(_)
elif stdout == PIPE:
c2pread, c2pwrite = _winapi.CreatePipe(None, 0)
c2pread, c2pwrite = Handle(c2pread), Handle(c2pwrite)
elif stdout == DEVNULL:
c2pwrite = msvcrt.get_osfhandle(self._get_devnull())
elif isinstance(stdout, int):
c2pwrite = msvcrt.get_osfhandle(stdout)
else:
# Assuming file-like object
c2pwrite = msvcrt.get_osfhandle(stdout.fileno())
c2pwrite = self._make_inheritable(c2pwrite)
if stderr is None:
errwrite = _winapi.GetStdHandle(_winapi.STD_ERROR_HANDLE)
if errwrite is None:
_, errwrite = _winapi.CreatePipe(None, 0)
errwrite = Handle(errwrite)
_winapi.CloseHandle(_)
elif stderr == PIPE:
errread, errwrite = _winapi.CreatePipe(None, 0)
errread, errwrite = Handle(errread), Handle(errwrite)
elif stderr == STDOUT:
errwrite = c2pwrite
elif stderr == DEVNULL:
errwrite = msvcrt.get_osfhandle(self._get_devnull())
elif isinstance(stderr, int):
errwrite = msvcrt.get_osfhandle(stderr)
else:
# Assuming file-like object
errwrite = msvcrt.get_osfhandle(stderr.fileno())
errwrite = self._make_inheritable(errwrite)
return (p2cread, p2cwrite,
c2pread, c2pwrite,
errread, errwrite)
def _make_inheritable(self, handle):
"""Return a duplicate of handle, which is inheritable"""
h = _winapi.DuplicateHandle(
_winapi.GetCurrentProcess(), handle,
_winapi.GetCurrentProcess(), 0, 1,
_winapi.DUPLICATE_SAME_ACCESS)
return Handle(h)
def _filter_handle_list(self, handle_list):
"""Filter out console handles that can't be used
in lpAttributeList["handle_list"] and make sure the list
isn't empty. This also removes duplicate handles."""
# An handle with it's lowest two bits set might be a special console
# handle that if passed in lpAttributeList["handle_list"], will
# cause it to fail.
return list({handle for handle in handle_list
if handle & 0x3 != 0x3
or _winapi.GetFileType(handle) !=
_winapi.FILE_TYPE_CHAR})
def _execute_child(self, args, executable, preexec_fn, close_fds,
pass_fds, cwd, env,
startupinfo, creationflags, shell,
p2cread, p2cwrite,
c2pread, c2pwrite,
errread, errwrite,
unused_restore_signals,
unused_gid, unused_gids, unused_uid,
unused_umask,
unused_start_new_session, unused_process_group):
"""Execute program (MS Windows version)"""
assert not pass_fds, "pass_fds not supported on Windows."
if isinstance(args, str):
pass
elif isinstance(args, bytes):
if shell:
raise TypeError('bytes args is not allowed on Windows')
args = list2cmdline([args])
elif isinstance(args, os.PathLike):
if shell:
raise TypeError('path-like args is not allowed when '
'shell is true')
args = list2cmdline([args])
else:
args = list2cmdline(args)
if executable is not None:
executable = os.fsdecode(executable)
# Process startup details
if startupinfo is None:
startupinfo = STARTUPINFO()
else:
# bpo-34044: Copy STARTUPINFO since it is modified above,
# so the caller can reuse it multiple times.
startupinfo = startupinfo.copy()
use_std_handles = -1 not in (p2cread, c2pwrite, errwrite)
if use_std_handles:
startupinfo.dwFlags |= _winapi.STARTF_USESTDHANDLES
startupinfo.hStdInput = p2cread
startupinfo.hStdOutput = c2pwrite
startupinfo.hStdError = errwrite
attribute_list = startupinfo.lpAttributeList
have_handle_list = bool(attribute_list and
"handle_list" in attribute_list and
attribute_list["handle_list"])
# If we were given an handle_list or need to create one
if have_handle_list or (use_std_handles and close_fds):
if attribute_list is None:
attribute_list = startupinfo.lpAttributeList = {}
handle_list = attribute_list["handle_list"] = \
list(attribute_list.get("handle_list", []))
if use_std_handles:
handle_list += [int(p2cread), int(c2pwrite), int(errwrite)]
handle_list[:] = self._filter_handle_list(handle_list)
if handle_list:
if not close_fds:
warnings.warn("startupinfo.lpAttributeList['handle_list'] "
"overriding close_fds", RuntimeWarning)
# When using the handle_list we always request to inherit
# handles but the only handles that will be inherited are
# the ones in the handle_list
close_fds = False
if shell:
startupinfo.dwFlags |= _winapi.STARTF_USESHOWWINDOW
startupinfo.wShowWindow = _winapi.SW_HIDE
comspec = os.environ.get("COMSPEC", "cmd.exe")
args = '{} /c "{}"'.format (comspec, args)
if cwd is not None:
cwd = os.fsdecode(cwd)
sys.audit("subprocess.Popen", executable, args, cwd, env)
# Start the process
try:
hp, ht, pid, tid = _winapi.CreateProcess(executable, args,
# no special security
None, None,
int(not close_fds),
creationflags,
env,
cwd,
startupinfo)
finally:
# Child is launched. Close the parent's copy of those pipe
# handles that only the child should have open. You need
# to make sure that no handles to the write end of the
# output pipe are maintained in this process or else the
# pipe will not close when the child process exits and the
# ReadFile will hang.
self._close_pipe_fds(p2cread, p2cwrite,
c2pread, c2pwrite,
errread, errwrite)
# Retain the process handle, but close the thread handle
self._child_created = True
self._handle = Handle(hp)
self.pid = pid
_winapi.CloseHandle(ht)
def _internal_poll(self, _deadstate=None,
_WaitForSingleObject=_winapi.WaitForSingleObject,
_WAIT_OBJECT_0=_winapi.WAIT_OBJECT_0,
_GetExitCodeProcess=_winapi.GetExitCodeProcess):
"""Check if child process has terminated. Returns returncode
attribute.
This method is called by __del__, so it can only refer to objects
in its local scope.
"""
if self.returncode is None:
if _WaitForSingleObject(self._handle, 0) == _WAIT_OBJECT_0:
self.returncode = _GetExitCodeProcess(self._handle)
return self.returncode
def _wait(self, timeout):
"""Internal implementation of wait() on Windows."""
if timeout is None:
timeout_millis = _winapi.INFINITE
else:
timeout_millis = int(timeout * 1000)
if self.returncode is None:
# API note: Returns immediately if timeout_millis == 0.
result = _winapi.WaitForSingleObject(self._handle,
timeout_millis)
if result == _winapi.WAIT_TIMEOUT:
raise TimeoutExpired(self.args, timeout)
self.returncode = _winapi.GetExitCodeProcess(self._handle)
return self.returncode
def _readerthread(self, fh, buffer):
buffer.append(fh.read())
fh.close()
def _communicate(self, input, endtime, orig_timeout):
# Start reader threads feeding into a list hanging off of this
# object, unless they've already been started.
if self.stdout and not hasattr(self, "_stdout_buff"):
self._stdout_buff = []
self.stdout_thread = \
threading.Thread(target=self._readerthread,
args=(self.stdout, self._stdout_buff))
self.stdout_thread.daemon = True
self.stdout_thread.start()
if self.stderr and not hasattr(self, "_stderr_buff"):
self._stderr_buff = []
self.stderr_thread = \
threading.Thread(target=self._readerthread,
args=(self.stderr, self._stderr_buff))
self.stderr_thread.daemon = True
self.stderr_thread.start()
if self.stdin:
self._stdin_write(input)
# Wait for the reader threads, or time out. If we time out, the
# threads remain reading and the fds left open in case the user
# calls communicate again.
if self.stdout is not None:
self.stdout_thread.join(self._remaining_time(endtime))
if self.stdout_thread.is_alive():
raise TimeoutExpired(self.args, orig_timeout)
if self.stderr is not None:
self.stderr_thread.join(self._remaining_time(endtime))
if self.stderr_thread.is_alive():
raise TimeoutExpired(self.args, orig_timeout)
# Collect the output from and close both pipes, now that we know
# both have been read successfully.
stdout = None
stderr = None
if self.stdout:
stdout = self._stdout_buff
self.stdout.close()
if self.stderr:
stderr = self._stderr_buff
self.stderr.close()
# All data exchanged. Translate lists into strings.
stdout = stdout[0] if stdout else None
stderr = stderr[0] if stderr else None
return (stdout, stderr)
def send_signal(self, sig):
"""Send a signal to the process."""
# Don't signal a process that we know has already died.
if self.returncode is not None:
return
if sig == signal.SIGTERM:
self.terminate()
elif sig == signal.CTRL_C_EVENT:
os.kill(self.pid, signal.CTRL_C_EVENT)
elif sig == signal.CTRL_BREAK_EVENT:
os.kill(self.pid, signal.CTRL_BREAK_EVENT)
else:
raise ValueError("Unsupported signal: {}".format(sig))
def terminate(self):
"""Terminates the process."""
# Don't terminate a process that we know has already died.
if self.returncode is not None:
return
try:
_winapi.TerminateProcess(self._handle, 1)
except PermissionError:
# ERROR_ACCESS_DENIED (winerror 5) is received when the
# process already died.
rc = _winapi.GetExitCodeProcess(self._handle)
if rc == _winapi.STILL_ACTIVE:
raise
self.returncode = rc
kill = terminate
else:
#
# POSIX methods
#
def _get_handles(self, stdin, stdout, stderr):
"""Construct and return tuple with IO objects:
p2cread, p2cwrite, c2pread, c2pwrite, errread, errwrite
"""
p2cread, p2cwrite = -1, -1
c2pread, c2pwrite = -1, -1
errread, errwrite = -1, -1
if stdin is None:
pass
elif stdin == PIPE:
p2cread, p2cwrite = os.pipe()
if self.pipesize > 0 and hasattr(fcntl, "F_SETPIPE_SZ"):
fcntl.fcntl(p2cwrite, fcntl.F_SETPIPE_SZ, self.pipesize)
elif stdin == DEVNULL:
p2cread = self._get_devnull()
elif isinstance(stdin, int):
p2cread = stdin
else:
# Assuming file-like object
p2cread = stdin.fileno()
if stdout is None:
pass
elif stdout == PIPE:
c2pread, c2pwrite = os.pipe()
if self.pipesize > 0 and hasattr(fcntl, "F_SETPIPE_SZ"):
fcntl.fcntl(c2pwrite, fcntl.F_SETPIPE_SZ, self.pipesize)
elif stdout == DEVNULL:
c2pwrite = self._get_devnull()
elif isinstance(stdout, int):
c2pwrite = stdout
else:
# Assuming file-like object
c2pwrite = stdout.fileno()
if stderr is None:
pass
elif stderr == PIPE:
errread, errwrite = os.pipe()
if self.pipesize > 0 and hasattr(fcntl, "F_SETPIPE_SZ"):
fcntl.fcntl(errwrite, fcntl.F_SETPIPE_SZ, self.pipesize)
elif stderr == STDOUT:
if c2pwrite != -1:
errwrite = c2pwrite
else: # child's stdout is not set, use parent's stdout
errwrite = sys.__stdout__.fileno()
elif stderr == DEVNULL:
errwrite = self._get_devnull()
elif isinstance(stderr, int):
errwrite = stderr
else:
# Assuming file-like object
errwrite = stderr.fileno()
return (p2cread, p2cwrite,
c2pread, c2pwrite,
errread, errwrite)
def _posix_spawn(self, args, executable, env, restore_signals,
p2cread, p2cwrite,
c2pread, c2pwrite,
errread, errwrite):
"""Execute program using os.posix_spawn()."""
if env is None:
env = os.environ
kwargs = {}
if restore_signals:
# See _Py_RestoreSignals() in Python/pylifecycle.c
sigset = []
for signame in ('SIGPIPE', 'SIGXFZ', 'SIGXFSZ'):
signum = getattr(signal, signame, None)
if signum is not None:
sigset.append(signum)
kwargs['setsigdef'] = sigset
file_actions = []
for fd in (p2cwrite, c2pread, errread):
if fd != -1:
file_actions.append((os.POSIX_SPAWN_CLOSE, fd))
for fd, fd2 in (
(p2cread, 0),
(c2pwrite, 1),
(errwrite, 2),
):
if fd != -1:
file_actions.append((os.POSIX_SPAWN_DUP2, fd, fd2))
if file_actions:
kwargs['file_actions'] = file_actions
self.pid = os.posix_spawn(executable, args, env, **kwargs)
self._child_created = True
self._close_pipe_fds(p2cread, p2cwrite,
c2pread, c2pwrite,
errread, errwrite)
def _execute_child(self, args, executable, preexec_fn, close_fds,
pass_fds, cwd, env,
startupinfo, creationflags, shell,
p2cread, p2cwrite,
c2pread, c2pwrite,
errread, errwrite,
restore_signals,
gid, gids, uid, umask,
start_new_session, process_group):
"""Execute program (POSIX version)"""
if isinstance(args, (str, bytes)):
args = [args]
elif isinstance(args, os.PathLike):
if shell:
raise TypeError('path-like args is not allowed when '
'shell is true')
args = [args]
else:
args = list(args)
if shell:
# On Android the default shell is at '/system/bin/sh'.
unix_shell = ('/system/bin/sh' if
hasattr(sys, 'getandroidapilevel') else '/bin/sh')
args = [unix_shell, "-c"] + args
if executable:
args[0] = executable
if executable is None:
executable = args[0]
sys.audit("subprocess.Popen", executable, args, cwd, env)
if (_USE_POSIX_SPAWN
and os.path.dirname(executable)
and preexec_fn is None
and not close_fds
and not pass_fds
and cwd is None
and (p2cread == -1 or p2cread > 2)
and (c2pwrite == -1 or c2pwrite > 2)
and (errwrite == -1 or errwrite > 2)
and not start_new_session
and process_group == -1
and gid is None
and gids is None
and uid is None
and umask < 0):
self._posix_spawn(args, executable, env, restore_signals,
p2cread, p2cwrite,
c2pread, c2pwrite,
errread, errwrite)
return
orig_executable = executable
# For transferring possible exec failure from child to parent.
# Data format: "exception name:hex errno:description"
# Pickle is not used; it is complex and involves memory allocation.
errpipe_read, errpipe_write = os.pipe()
# errpipe_write must not be in the standard io 0, 1, or 2 fd range.
low_fds_to_close = []
while errpipe_write < 3:
low_fds_to_close.append(errpipe_write)
errpipe_write = os.dup(errpipe_write)
for low_fd in low_fds_to_close:
os.close(low_fd)
try:
try:
# We must avoid complex work that could involve
# malloc or free in the child process to avoid
# potential deadlocks, thus we do all this here.
# and pass it to fork_exec()
if env is not None:
env_list = []
for k, v in env.items():
k = os.fsencode(k)
if b'=' in k:
raise ValueError("illegal environment variable name")
env_list.append(k + b'=' + os.fsencode(v))
else:
env_list = None # Use execv instead of execve.
executable = os.fsencode(executable)
if os.path.dirname(executable):
executable_list = (executable,)
else:
# This matches the behavior of os._execvpe().
executable_list = tuple(
os.path.join(os.fsencode(dir), executable)
for dir in os.get_exec_path(env))
fds_to_keep = set(pass_fds)
fds_to_keep.add(errpipe_write)
self.pid = _fork_exec(
args, executable_list,
close_fds, tuple(sorted(map(int, fds_to_keep))),
cwd, env_list,
p2cread, p2cwrite, c2pread, c2pwrite,
errread, errwrite,
errpipe_read, errpipe_write,
restore_signals, start_new_session,
process_group, gid, gids, uid, umask,
preexec_fn, _USE_VFORK)
self._child_created = True
finally:
# be sure the FD is closed no matter what
os.close(errpipe_write)
self._close_pipe_fds(p2cread, p2cwrite,
c2pread, c2pwrite,
errread, errwrite)
# Wait for exec to fail or succeed; possibly raising an
# exception (limited in size)
errpipe_data = bytearray()
while True:
part = os.read(errpipe_read, 50000)
errpipe_data += part
if not part or len(errpipe_data) > 50000:
break
finally:
# be sure the FD is closed no matter what
os.close(errpipe_read)
if errpipe_data:
try:
pid, sts = os.waitpid(self.pid, 0)
if pid == self.pid:
self._handle_exitstatus(sts)
else:
self.returncode = sys.maxsize
except ChildProcessError:
pass
try:
exception_name, hex_errno, err_msg = (
errpipe_data.split(b':', 2))
# The encoding here should match the encoding
# written in by the subprocess implementations
# like _posixsubprocess
err_msg = err_msg.decode()
except ValueError:
exception_name = b'SubprocessError'
hex_errno = b'0'
err_msg = 'Bad exception data from child: {!r}'.format(
bytes(errpipe_data))
child_exception_type = getattr(
builtins, exception_name.decode('ascii'),
SubprocessError)
if issubclass(child_exception_type, OSError) and hex_errno:
errno_num = int(hex_errno, 16)
child_exec_never_called = (err_msg == "noexec")
if child_exec_never_called:
err_msg = ""
# The error must be from chdir(cwd).
err_filename = cwd
else:
err_filename = orig_executable
if errno_num != 0:
err_msg = os.strerror(errno_num)
raise child_exception_type(errno_num, err_msg, err_filename)
raise child_exception_type(err_msg)
def _handle_exitstatus(self, sts,
waitstatus_to_exitcode=os.waitstatus_to_exitcode,
_WIFSTOPPED=os.WIFSTOPPED,
_WSTOPSIG=os.WSTOPSIG):
"""All callers to this function MUST hold self._waitpid_lock."""
# This method is called (indirectly) by __del__, so it cannot
# refer to anything outside of its local scope.
if _WIFSTOPPED(sts):
self.returncode = -_WSTOPSIG(sts)
else:
self.returncode = waitstatus_to_exitcode(sts)
def _internal_poll(self, _deadstate=None, _waitpid=os.waitpid,
_WNOHANG=os.WNOHANG, _ECHILD=errno.ECHILD):
"""Check if child process has terminated. Returns returncode
attribute.
This method is called by __del__, so it cannot reference anything
outside of the local scope (nor can any methods it calls).
"""
if self.returncode is None:
if not self._waitpid_lock.acquire(False):
# Something else is busy calling waitpid. Don't allow two
# at once. We know nothing yet.
return None
try:
if self.returncode is not None:
return self.returncode # Another thread waited.
pid, sts = _waitpid(self.pid, _WNOHANG)
if pid == self.pid:
self._handle_exitstatus(sts)
except OSError as e:
if _deadstate is not None:
self.returncode = _deadstate
elif e.errno == _ECHILD:
# This happens if SIGCLD is set to be ignored or
# waiting for child processes has otherwise been
# disabled for our process. This child is dead, we
# can't get the status.
# http://bugs.python.org/issue15756
self.returncode = 0
finally:
self._waitpid_lock.release()
return self.returncode
def _try_wait(self, wait_flags):
"""All callers to this function MUST hold self._waitpid_lock."""
try:
(pid, sts) = os.waitpid(self.pid, wait_flags)
except ChildProcessError:
# This happens if SIGCLD is set to be ignored or waiting
# for child processes has otherwise been disabled for our
# process. This child is dead, we can't get the status.
pid = self.pid
sts = 0
return (pid, sts)
def _wait(self, timeout):
"""Internal implementation of wait() on POSIX."""
if self.returncode is not None:
return self.returncode
if timeout is not None:
endtime = _time() + timeout
# Enter a busy loop if we have a timeout. This busy loop was
# cribbed from Lib/threading.py in Thread.wait() at r71065.
delay = 0.0005 # 500 us -> initial delay of 1 ms
while True:
if self._waitpid_lock.acquire(False):
try:
if self.returncode is not None:
break # Another thread waited.
(pid, sts) = self._try_wait(os.WNOHANG)
assert pid == self.pid or pid == 0
if pid == self.pid:
self._handle_exitstatus(sts)
break
finally:
self._waitpid_lock.release()
remaining = self._remaining_time(endtime)
if remaining <= 0:
raise TimeoutExpired(self.args, timeout)
delay = min(delay * 2, remaining, .05)
time.sleep(delay)
else:
while self.returncode is None:
with self._waitpid_lock:
if self.returncode is not None:
break # Another thread waited.
(pid, sts) = self._try_wait(0)
# Check the pid and loop as waitpid has been known to
# return 0 even without WNOHANG in odd situations.
# http://bugs.python.org/issue14396.
if pid == self.pid:
self._handle_exitstatus(sts)
return self.returncode
def _communicate(self, input, endtime, orig_timeout):
if self.stdin and not self._communication_started:
# Flush stdio buffer. This might block, if the user has
# been writing to .stdin in an uncontrolled fashion.
try:
self.stdin.flush()
except BrokenPipeError:
pass # communicate() must ignore BrokenPipeError.
if not input:
try:
self.stdin.close()
except BrokenPipeError:
pass # communicate() must ignore BrokenPipeError.
stdout = None
stderr = None
# Only create this mapping if we haven't already.
if not self._communication_started:
self._fileobj2output = {}
if self.stdout:
self._fileobj2output[self.stdout] = []
if self.stderr:
self._fileobj2output[self.stderr] = []
if self.stdout:
stdout = self._fileobj2output[self.stdout]
if self.stderr:
stderr = self._fileobj2output[self.stderr]
self._save_input(input)
if self._input:
input_view = memoryview(self._input)
with _PopenSelector() as selector:
if self.stdin and input:
selector.register(self.stdin, selectors.EVENT_WRITE)
if self.stdout and not self.stdout.closed:
selector.register(self.stdout, selectors.EVENT_READ)
if self.stderr and not self.stderr.closed:
selector.register(self.stderr, selectors.EVENT_READ)
while selector.get_map():
timeout = self._remaining_time(endtime)
if timeout is not None and timeout < 0:
self._check_timeout(endtime, orig_timeout,
stdout, stderr,
skip_check_and_raise=True)
raise RuntimeError( # Impossible :)
'_check_timeout(..., skip_check_and_raise=True) '
'failed to raise TimeoutExpired.')
ready = selector.select(timeout)
self._check_timeout(endtime, orig_timeout, stdout, stderr)
# XXX Rewrite these to use non-blocking I/O on the file
# objects; they are no longer using C stdio!
for key, events in ready:
if key.fileobj is self.stdin:
chunk = input_view[self._input_offset :
self._input_offset + _PIPE_BUF]
try:
self._input_offset += os.write(key.fd, chunk)
except BrokenPipeError:
selector.unregister(key.fileobj)
key.fileobj.close()
else:
if self._input_offset >= len(self._input):
selector.unregister(key.fileobj)
key.fileobj.close()
elif key.fileobj in (self.stdout, self.stderr):
data = os.read(key.fd, 32768)
if not data:
selector.unregister(key.fileobj)
key.fileobj.close()
self._fileobj2output[key.fileobj].append(data)
self.wait(timeout=self._remaining_time(endtime))
# All data exchanged. Translate lists into strings.
if stdout is not None:
stdout = b''.join(stdout)
if stderr is not None:
stderr = b''.join(stderr)
# Translate newlines, if requested.
# This also turns bytes into strings.
if self.text_mode:
if stdout is not None:
stdout = self._translate_newlines(stdout,
self.stdout.encoding,
self.stdout.errors)
if stderr is not None:
stderr = self._translate_newlines(stderr,
self.stderr.encoding,
self.stderr.errors)
return (stdout, stderr)
def _save_input(self, input):
# This method is called from the _communicate_with_*() methods
# so that if we time out while communicating, we can continue
# sending input if we retry.
if self.stdin and self._input is None:
self._input_offset = 0
self._input = input
if input is not None and self.text_mode:
self._input = self._input.encode(self.stdin.encoding,
self.stdin.errors)
def send_signal(self, sig):
"""Send a signal to the process."""
# bpo-38630: Polling reduces the risk of sending a signal to the
# wrong process if the process completed, the Popen.returncode
# attribute is still None, and the pid has been reassigned
# (recycled) to a new different process. This race condition can
# happens in two cases.
#
# Case 1. Thread A calls Popen.poll(), thread B calls
# Popen.send_signal(). In thread A, waitpid() succeed and returns
# the exit status. Thread B calls kill() because poll() in thread A
# did not set returncode yet. Calling poll() in thread B prevents
# the race condition thanks to Popen._waitpid_lock.
#
# Case 2. waitpid(pid, 0) has been called directly, without
# using Popen methods: returncode is still None is this case.
# Calling Popen.poll() will set returncode to a default value,
# since waitpid() fails with ProcessLookupError.
self.poll()
if self.returncode is not None:
# Skip signalling a process that we know has already died.
return
# The race condition can still happen if the race condition
# described above happens between the returncode test
# and the kill() call.
try:
os.kill(self.pid, sig)
except ProcessLookupError:
# Suppress the race condition error; bpo-40550.
pass
def terminate(self):
"""Terminate the process with SIGTERM
"""
self.send_signal(signal.SIGTERM)
def kill(self):
"""Kill the process with SIGKILL
"""
self.send_signal(signal.SIGKILL)