cpython/Doc/using/cmdline.rst

545 lines
17 KiB
ReStructuredText

.. highlightlang:: none
.. _using-on-general:
Command line and environment
============================
The CPython interpreter scans the command line and the environment for various
settings.
.. note::
Other implementations' command line schemes may differ. See
:ref:`implementations` for further resources.
.. _using-on-cmdline:
Command line
------------
When invoking Python, you may specify any of these options::
python [-dEiOQsStuUvxX3?] [-c command | -m module-name | script | - ] [args]
The most common use case is, of course, a simple invocation of a script::
python myscript.py
.. _using-on-interface-options:
Interface options
~~~~~~~~~~~~~~~~~
The interpreter interface resembles that of the UNIX shell, but provides some
additional methods of invocation:
* When called with standard input connected to a tty device, it prompts for
commands and executes them until an EOF (an end-of-file character, you can
produce that with *Ctrl-D* on UNIX or *Ctrl-Z, Enter* on Windows) is read.
* When called with a file name argument or with a file as standard input, it
reads and executes a script from that file.
* When called with a directory name argument, it reads and executes an
appropriately named script from that directory.
* When called with ``-c command``, it executes the Python statement(s) given as
*command*. Here *command* may contain multiple statements separated by
newlines. Leading whitespace is significant in Python statements!
* When called with ``-m module-name``, the given module is located on the
Python module path and executed as a script.
In non-interactive mode, the entire input is parsed before it is executed.
An interface option terminates the list of options consumed by the interpreter,
all consecutive arguments will end up in :data:`sys.argv` -- note that the first
element, subscript zero (``sys.argv[0]``), is a string reflecting the program's
source.
.. cmdoption:: -c <command>
Execute the Python code in *command*. *command* can be one ore more
statements separated by newlines, with significant leading whitespace as in
normal module code.
If this option is given, the first element of :data:`sys.argv` will be
``"-c"`` and the current directory will be added to the start of
:data:`sys.path` (allowing modules in that directory to be imported as top
level modules).
.. cmdoption:: -m <module-name>
Search :data:`sys.path` for the named module and execute its contents as
the :mod:`__main__` module.
Since the argument is a *module* name, you must not give a file extension
(``.py``). The ``module-name`` should be a valid Python module name, but
the implementation may not always enforce this (e.g. it may allow you to
use a name that includes a hyphen).
.. note::
This option cannot be used with builtin modules and extension modules
written in C, since they do not have Python module files. However, it
can still be used for precompiled modules, even if the original source
file is not available.
If this option is given, the first element of :data:`sys.argv` will be the
full path to the module file. As with the :option:`-c` option, the current
directory will be added to the start of :data:`sys.path`.
Many standard library modules contain code that is invoked on their execution
as a script. An example is the :mod:`timeit` module::
python -mtimeit -s 'setup here' 'benchmarked code here'
python -mtimeit -h # for details
.. seealso::
:func:`runpy.run_module`
The actual implementation of this feature.
:pep:`338` -- Executing modules as scripts
.. versionadded:: 2.4
.. versionchanged:: 2.5
The named module can now be located inside a package.
.. describe:: -
Read commands from standard input (:data:`sys.stdin`). If standard input is
a terminal, :option:`-i` is implied.
If this option is given, the first element of :data:`sys.argv` will be
``"-"`` and the current directory will be added to the start of
:data:`sys.path`.
.. describe:: <script>
Execute the Python code contained in *script*, which must be a filesystem
path (absolute or relative) referring to either a Python file, a directory
containing a ``__main__.py`` file, or a zipfile containing a
``__main__.py`` file.
If this option is given, the first element of :data:`sys.argv` will be the
script name as given on the command line.
If the script name refers directly to a Python file, the directory
containing that file is added to the start of :data:`sys.path`, and the
file is executed as the :mod:`__main__` module.
If the script name refers to a directory or zipfile, the script name is
added to the start of :data:`sys.path` and the ``__main__.py`` file in
that location is executed as the :mod:`__main__` module.
.. versionchanged:: 2.5
Directories and zipfiles containing a ``__main__.py`` file at the top
level are now considered valid Python scripts.
If no interface option is given, :option:`-i` is implied, ``sys.argv[0]`` is
an empty string (``""``) and the current directory will be added to the
start of :data:`sys.path`.
.. seealso:: :ref:`tut-invoking`
Generic options
~~~~~~~~~~~~~~~
.. cmdoption:: -?
-h
--help
Print a short description of all command line options.
.. versionchanged:: 2.5
The ``--help`` variant.
.. cmdoption:: -V
--version
Print the Python version number and exit. Example output could be::
Python 2.5.1
.. versionchanged:: 2.5
The ``--version`` variant.
Miscellaneous options
~~~~~~~~~~~~~~~~~~~~~
.. cmdoption:: -B
If given, Python won't try to write ``.pyc`` or ``.pyo`` files on the
import of source modules. See also :envvar:`PYTHONDONTWRITEBYTECODE`.
.. versionadded:: 2.6
.. cmdoption:: -d
Turn on parser debugging output (for wizards only, depending on compilation
options). See also :envvar:`PYTHONDEBUG`.
.. cmdoption:: -E
Ignore all :envvar:`PYTHON*` environment variables, e.g.
:envvar:`PYTHONPATH` and :envvar:`PYTHONHOME`, that might be set.
.. versionadded:: 2.2
.. cmdoption:: -i
When a script is passed as first argument or the :option:`-c` option is used,
enter interactive mode after executing the script or the command, even when
:data:`sys.stdin` does not appear to be a terminal. The
:envvar:`PYTHONSTARTUP` file is not read.
This can be useful to inspect global variables or a stack trace when a script
raises an exception. See also :envvar:`PYTHONINSPECT`.
.. cmdoption:: -O
Turn on basic optimizations. This changes the filename extension for
compiled (:term:`bytecode`) files from ``.pyc`` to ``.pyo``. See also
:envvar:`PYTHONOPTIMIZE`.
.. cmdoption:: -OO
Discard docstrings in addition to the :option:`-O` optimizations.
.. cmdoption:: -Q <arg>
Division control. The argument must be one of the following:
``old``
division of int/int and long/long return an int or long (*default*)
``new``
new division semantics, i.e. division of int/int and long/long returns a
float
``warn``
old division semantics with a warning for int/int and long/long
``warnall``
old division semantics with a warning for all uses of the division operator
.. seealso::
:file:`Tools/scripts/fixdiv.py`
for a use of ``warnall``
:pep:`238` -- Changing the division operator
.. cmdoption:: -s
Don't add user site directory to sys.path
.. versionadded:: 2.6
.. seealso::
:pep:`370` -- Per user site-packages directory
.. cmdoption:: -S
Disable the import of the module :mod:`site` and the site-dependent
manipulations of :data:`sys.path` that it entails.
.. cmdoption:: -t
Issue a warning when a source file mixes tabs and spaces for indentation in a
way that makes it depend on the worth of a tab expressed in spaces. Issue an
error when the option is given twice (:option:`-tt`).
.. cmdoption:: -u
Force stdin, stdout and stderr to be totally unbuffered. On systems where it
matters, also put stdin, stdout and stderr in binary mode.
Note that there is internal buffering in :meth:`file.readlines` and
:ref:`bltin-file-objects` (``for line in sys.stdin``) which is not influenced
by this option. To work around this, you will want to use
:meth:`file.readline` inside a ``while 1:`` loop.
See also :envvar:`PYTHONUNBUFFERED`.
.. XXX should the -U option be documented?
.. cmdoption:: -v
Print a message each time a module is initialized, showing the place
(filename or built-in module) from which it is loaded. When given twice
(:option:`-vv`), print a message for each file that is checked for when
searching for a module. Also provides information on module cleanup at exit.
See also :envvar:`PYTHONVERBOSE`.
.. cmdoption:: -W arg
Warning control. Python's warning machinery by default prints warning
messages to :data:`sys.stderr`. A typical warning message has the following
form::
file:line: category: message
By default, each warning is printed once for each source line where it
occurs. This option controls how often warnings are printed.
Multiple :option:`-W` options may be given; when a warning matches more than
one option, the action for the last matching option is performed. Invalid
:option:`-W` options are ignored (though, a warning message is printed about
invalid options when the first warning is issued).
Warnings can also be controlled from within a Python program using the
:mod:`warnings` module.
The simplest form of argument is one of the following action strings (or a
unique abbreviation):
``ignore``
Ignore all warnings.
``default``
Explicitly request the default behavior (printing each warning once per
source line).
``all``
Print a warning each time it occurs (this may generate many messages if a
warning is triggered repeatedly for the same source line, such as inside a
loop).
``module``
Print each warning only only the first time it occurs in each module.
``once``
Print each warning only the first time it occurs in the program.
``error``
Raise an exception instead of printing a warning message.
The full form of argument is::
action:message:category:module:line
Here, *action* is as explained above but only applies to messages that match
the remaining fields. Empty fields match all values; trailing empty fields
may be omitted. The *message* field matches the start of the warning message
printed; this match is case-insensitive. The *category* field matches the
warning category. This must be a class name; the match test whether the
actual warning category of the message is a subclass of the specified warning
category. The full class name must be given. The *module* field matches the
(fully-qualified) module name; this match is case-sensitive. The *line*
field matches the line number, where zero matches all line numbers and is
thus equivalent to an omitted line number.
.. seealso::
:mod:`warnings` -- the warnings module
:pep:`230` -- Warning framework
.. cmdoption:: -x
Skip the first line of the source, allowing use of non-Unix forms of
``#!cmd``. This is intended for a DOS specific hack only.
.. warning:: The line numbers in error messages will be off by one!
.. cmdoption:: -3
Warn about Python 3.x incompatibilities. Among these are:
* :meth:`dict.has_key`
* :func:`apply`
* :func:`callable`
* :func:`coerce`
* :func:`execfile`
* :func:`reduce`
* :func:`reload`
Using these will emit a :exc:`DeprecationWarning`.
.. versionadded:: 2.6
.. _using-on-envvars:
Environment variables
---------------------
These environment variables influence Python's behavior.
.. envvar:: PYTHONHOME
Change the location of the standard Python libraries. By default, the
libraries are searched in :file:`{prefix}/lib/python{version}` and
:file:`{exec_prefix}/lib/python{version}`, where :file:`{prefix}` and
:file:`{exec_prefix}` are installation-dependent directories, both defaulting
to :file:`/usr/local`.
When :envvar:`PYTHONHOME` is set to a single directory, its value replaces
both :file:`{prefix}` and :file:`{exec_prefix}`. To specify different values
for these, set :envvar:`PYTHONHOME` to :file:`{prefix}:{exec_prefix}`.
.. envvar:: PYTHONPATH
Augment the default search path for module files. The format is the same as
the shell's :envvar:`PATH`: one or more directory pathnames separated by
:data:`os.pathsep` (e.g. colons on Unix or semicolons on Windows).
Non-existent directories are silently ignored.
In addition to normal directories, individual :envvar:`PYTHONPATH` entries
may refer to zipfiles containing pure Python modules (in either source or
compiled form). Extension modules cannot be imported from zipfiles.
The default search path is installation dependent, but generally begins with
:file:`{prefix}/lib/python{version}`` (see :envvar:`PYTHONHOME` above). It
is *always* appended to :envvar:`PYTHONPATH`.
An additional directory will be inserted in the search path in front of
:envvar:`PYTHONPATH` as described above under
:ref:`using-on-interface-options`. The search path can be manipulated from
within a Python program as the variable :data:`sys.path`.
.. envvar:: PYTHONSTARTUP
If this is the name of a readable file, the Python commands in that file are
executed before the first prompt is displayed in interactive mode. The file
is executed in the same namespace where interactive commands are executed so
that objects defined or imported in it can be used without qualification in
the interactive session. You can also change the prompts :data:`sys.ps1` and
:data:`sys.ps2` in this file.
.. envvar:: PYTHONY2K
Set this to a non-empty string to cause the :mod:`time` module to require
dates specified as strings to include 4-digit years, otherwise 2-digit years
are converted based on rules described in the :mod:`time` module
documentation.
.. envvar:: PYTHONOPTIMIZE
If this is set to a non-empty string it is equivalent to specifying the
:option:`-O` option. If set to an integer, it is equivalent to specifying
:option:`-O` multiple times.
.. envvar:: PYTHONDEBUG
If this is set to a non-empty string it is equivalent to specifying the
:option:`-d` option. If set to an integer, it is equivalent to specifying
:option:`-d` multiple times.
.. envvar:: PYTHONINSPECT
If this is set to a non-empty string it is equivalent to specifying the
:option:`-i` option.
This variable can also be modified by Python code using :data:`os.environ`
to force inspect mode on program termination.
.. envvar:: PYTHONUNBUFFERED
If this is set to a non-empty string it is equivalent to specifying the
:option:`-u` option.
.. envvar:: PYTHONVERBOSE
If this is set to a non-empty string it is equivalent to specifying the
:option:`-v` option. If set to an integer, it is equivalent to specifying
:option:`-v` multiple times.
.. envvar:: PYTHONCASEOK
If this is set, Python ignores case in :keyword:`import` statements. This
only works on Windows.
.. envvar:: PYTHONDONTWRITEBYTECODE
If this is set, Python won't try to write ``.pyc`` or ``.pyo`` files on the
import of source modules.
.. versionadded:: 2.6
.. envvar:: PYTHONIOENCODING
Overrides the encoding used for stdin/stdout/stderr, in the syntax
``encodingname:errorhandler``. The ``:errorhandler`` part is optional and
has the same meaning as in :func:`str.encode`.
.. versionadded:: 2.6
.. envvar:: PYTHONNOUSERSITE
If this is set, Python won't add the user site directory to sys.path
.. versionadded:: 2.6
.. seealso::
:pep:`370` -- Per user site-packages directory
.. envvar:: PYTHONUSERBASE
Sets the base directory for the user site directory
.. versionadded:: 2.6
.. seealso::
:pep:`370` -- Per user site-packages directory
.. envvar:: PYTHONEXECUTABLE
If this environment variable is set, ``sys.argv[0]`` will be set to its
value instead of the value got through the C runtime. Only works on
Mac OS X.
Debug-mode variables
~~~~~~~~~~~~~~~~~~~~
Setting these variables only has an effect in a debug build of Python, that is,
if Python was configured with the :option:`--with-pydebug` build option.
.. envvar:: PYTHONTHREADDEBUG
If set, Python will print threading debug info.
.. versionchanged:: 2.6
Previously, this variable was called ``THREADDEBUG``.
.. envvar:: PYTHONDUMPREFS
If set, Python will dump objects and reference counts still alive after
shutting down the interpreter.
.. envvar:: PYTHONMALLOCSTATS
If set, Python will print memory allocation statistics every time a new
object arena is created, and on shutdown.