cpython/Doc/whatsnew/whatsnew25.tex

\documentclass{howto}
\usepackage{distutils}
% $Id$

% The easy_install stuff
% Stateful codec changes
% Fix XXX comments
% Count up the patches and bugs

\title{What's New in Python 2.5}
\release{0.1}
\author{A.M. Kuchling}
\authoraddress{\email{amk@amk.ca}}

\begin{document}
\maketitle
\tableofcontents

This article explains the new features in Python 2.5.  No release date
for Python 2.5 has been set; it will probably be released in the
autumn of 2006.  \pep{356} describes the planned release schedule.

Comments, suggestions, and error reports are welcome; please e-mail them 
to the author or open a bug in the Python bug tracker.

% XXX Compare with previous release in 2 - 3 sentences here.

This article doesn't attempt to provide a complete specification of
the new features, but instead provides a convenient overview.  For
full details, you should refer to the documentation for Python 2.5.
% XXX add hyperlink when the documentation becomes available online.
If you want to understand the complete implementation and design
rationale, refer to the PEP for a particular new feature.


%======================================================================
\section{PEP 243: Uploading Modules to PyPI}

PEP 243 describes an HTTP-based protocol for submitting software
packages to a central archive.  The Python package index at
\url{http://cheeseshop.python.org} now supports package uploads, and
the new \command{upload} Distutils command will upload a package to the
repository.

Before a package can be uploaded, you must be able to build a
distribution using the \command{sdist} Distutils command.  Once that
works, you can run \code{python setup.py upload} to add your package
to the PyPI archive.  Optionally you can GPG-sign the package by
supplying the \programopt{--sign} and
\programopt{--identity} options.

\begin{seealso}

\seepep{243}{Module Repository Upload Mechanism}{PEP written by
Sean Reifschneider; implemented by Martin von~L\"owis
and Richard Jones.  Note that the PEP doesn't exactly 
describe what's implemented in PyPI.}

\end{seealso}


%======================================================================
\section{PEP 308: Conditional Expressions}

For a long time, people have been requesting a way to write
conditional expressions, expressions that return value A or value B
depending on whether a Boolean value is true or false.  A conditional
expression lets you write a single assignment statement that has the
same effect as the following:

\begin{verbatim}
if condition:
    x = true_value
else:
    x = false_value
\end{verbatim}

There have been endless tedious discussions of syntax on both
python-dev and comp.lang.python.  A vote was even held that found the
majority of voters wanted conditional expressions in some form,
but there was no syntax that was preferred by a clear majority.
Candidates included C's \code{cond ? true_v : false_v},
\code{if cond then true_v else false_v}, and 16 other variations.

GvR eventually chose a surprising syntax:

\begin{verbatim}
x = true_value if condition else false_value
\end{verbatim}

Evaluation is still lazy as in existing Boolean expressions, so the
order of evaluation jumps around a bit.  The \var{condition}
expression in the middle is evaluated first, and the \var{true_value}
expression is evaluated only if the condition was true.  Similarly,
the \var{false_value} expression is only evaluated when the condition
is false.

This syntax may seem strange and backwards; why does the condition go
in the \emph{middle} of the expression, and not in the front as in C's
\code{c ? x : y}?  The decision was checked by applying the new syntax
to the modules in the standard library and seeing how the resulting
code read.  In many cases where a conditional expression is used, one
value seems to be the 'common case' and one value is an 'exceptional
case', used only on rarer occasions when the condition isn't met.  The
conditional syntax makes this pattern a bit more obvious:

\begin{verbatim}
contents = ((doc + '\n') if doc else '')
\end{verbatim}

I read the above statement as meaning ``here \var{contents} is 
usually assigned a value of \code{doc+'\e n'}; sometimes 
\var{doc} is empty, in which special case an empty string is returned.''  
I doubt I will use conditional expressions very often where there 
isn't a clear common and uncommon case.

There was some discussion of whether the language should require
surrounding conditional expressions with parentheses.  The decision
was made to \emph{not} require parentheses in the Python language's
grammar, but as a matter of style I think you should always use them.
Consider these two statements:

\begin{verbatim}
# First version -- no parens
level = 1 if logging else 0

# Second version -- with parens
level = (1 if logging else 0)
\end{verbatim}

In the first version, I think a reader's eye might group the statement
into 'level = 1', 'if logging', 'else 0', and think that the condition
decides whether the assignment to \var{level} is performed.  The
second version reads better, in my opinion, because it makes it clear
that the assignment is always performed and the choice is being made
between two values.

Another reason for including the brackets: a few odd combinations of
list comprehensions and lambdas could look like incorrect conditional
expressions. See \pep{308} for some examples.  If you put parentheses
around your conditional expressions, you won't run into this case.


\begin{seealso}

\seepep{308}{Conditional Expressions}{PEP written by
Guido van Rossum and Raymond D. Hettinger; implemented by Thomas
Wouters.}

\end{seealso}


%======================================================================
\section{PEP 309: Partial Function Application}

The \module{functional} module is intended to contain tools for
functional-style programming.  Currently it only contains a
\class{partial()} function, but new functions will probably be added
in future versions of Python.

For programs written in a functional style, it can be useful to
construct variants of existing functions that have some of the
parameters filled in.  Consider a Python function \code{f(a, b, c)};
you could create a new function \code{g(b, c)} that was equivalent to
\code{f(1, b, c)}.  This is called ``partial function application'',
and is provided by the \class{partial} class in the new
\module{functional} module.

The constructor for \class{partial} takes the arguments
\code{(\var{function}, \var{arg1}, \var{arg2}, ...
\var{kwarg1}=\var{value1}, \var{kwarg2}=\var{value2})}.  The resulting
object is callable, so you can just call it to invoke \var{function}
with the filled-in arguments.

Here's a small but realistic example:

\begin{verbatim}
import functional

def log (message, subsystem):
    "Write the contents of 'message' to the specified subsystem."
    print '%s: %s' % (subsystem, message)
    ...

server_log = functional.partial(log, subsystem='server')
server_log('Unable to open socket')
\end{verbatim}

Here's another example, from a program that uses PyGTk.  Here a
context-sensitive pop-up menu is being constructed dynamically.  The
callback provided for the menu option is a partially applied version
of the \method{open_item()} method, where the first argument has been
provided.

\begin{verbatim}
...
class Application:
    def open_item(self, path):
       ...
    def init (self):
        open_func = functional.partial(self.open_item, item_path)
        popup_menu.append( ("Open", open_func, 1) )
\end{verbatim}


\begin{seealso}

\seepep{309}{Partial Function Application}{PEP proposed and written by
Peter Harris; implemented by Hye-Shik Chang, with adaptations by
Raymond Hettinger.}

\end{seealso}


%======================================================================
\section{PEP 314: Metadata for Python Software Packages v1.1}

Some simple dependency support was added to Distutils.  The
\function{setup()} function now has \code{requires}, \code{provides},
and \code{obsoletes} keyword parameters.  When you build a source
distribution using the \code{sdist} command, the dependency
information will be recorded in the \file{PKG-INFO} file.

Another new keyword parameter is \code{download_url}, which should be
set to a URL for the package's source code.  This means it's now
possible to look up an entry in the package index, determine the
dependencies for a package, and download the required packages.

\begin{verbatim}
VERSION = '1.0'
setup(name='PyPackage', 
      version=VERSION,
      requires=['numarray', 'zlib (>=1.1.4)'],
      obsoletes=['OldPackage']
      download_url=('http://www.example.com/pypackage/dist/pkg-%s.tar.gz'
                    % VERSION),
     )
\end{verbatim}
 
\begin{seealso}

\seepep{314}{Metadata for Python Software Packages v1.1}{PEP proposed
and written by A.M. Kuchling, Richard Jones, and Fred Drake; 
implemented by Richard Jones and Fred Drake.}

\end{seealso}


%======================================================================
\section{PEP 328: Absolute and Relative Imports}

The simpler part of PEP 328 was implemented in Python 2.4: parentheses
could now be used to enclose the names imported from a module using
the \code{from ... import ...} statement, making it easier to import
many different names.

The more complicated part has been implemented in Python 2.5:
importing a module can be specified to use absolute or
package-relative imports.  The plan is to move toward making absolute
imports the default in future versions of Python.

Let's say you have a package directory like this:
\begin{verbatim}
pkg/
pkg/__init__.py
pkg/main.py
pkg/string.py
\end{verbatim}

This defines a package named \module{pkg} containing the
\module{pkg.main} and \module{pkg.string} submodules.  

Consider the code in the \file{main.py} module.  What happens if it
executes the statement \code{import string}?  In Python 2.4 and
earlier, it will first look in the package's directory to perform a
relative import, finds \file{pkg/string.py}, imports the contents of
that file as the \module{pkg.string} module, and that module is bound
to the name \samp{string} in the \module{pkg.main} module's namespace.

That's fine if \module{pkg.string} was what you wanted.  But what if
you wanted Python's standard \module{string} module?  There's no clean
way to ignore \module{pkg.string} and look for the standard module;
generally you had to look at the contents of \code{sys.modules}, which
is slightly unclean.   
Holger Krekel's \module{py.std} package provides a tidier way to perform
imports from the standard library, \code{import py ; py.std.string.join()},
but that package isn't available on all Python installations.

Reading code which relies on relative imports is also less clear,
because a reader may be confused about which module, \module{string}
or \module{pkg.string}, is intended to be used.  Python users soon
learned not to duplicate the names of standard library modules in the
names of their packages' submodules, but you can't protect against
having your submodule's name being used for a new module added in a
future version of Python.

In Python 2.5, you can switch \keyword{import}'s behaviour to 
absolute imports using a \code{from __future__ import absolute_import}
directive.  This absolute-import behaviour will become the default in
a future version (probably Python 2.7).  Once absolute imports 
are the default, \code{import string} will
always find the standard library's version.
It's suggested that users should begin using absolute imports as much
as possible, so it's preferable to begin writing \code{from pkg import
string} in your code.  

Relative imports are still possible by adding a leading period 
to the module name when using the \code{from ... import} form:

\begin{verbatim}
# Import names from pkg.string
from .string import name1, name2
# Import pkg.string
from . import string
\end{verbatim}

This imports the \module{string} module relative to the current
package, so in \module{pkg.main} this will import \var{name1} and
\var{name2} from \module{pkg.string}.  Additional leading periods
perform the relative import starting from the parent of the current
package.  For example, code in the \module{A.B.C} module can do:

\begin{verbatim}
from . import D                 # Imports A.B.D
from .. import E                # Imports A.E
from ..F import G               # Imports A.F.G
\end{verbatim}

Leading periods cannot be used with the \code{import \var{modname}} 
form of the import statement, only the \code{from ... import} form.

\begin{seealso}

\seepep{328}{Imports: Multi-Line and Absolute/Relative}
{PEP written by Aahz; implemented by Thomas Wouters.}

\seeurl{http://codespeak.net/py/current/doc/index.html}
{The py library by Holger Krekel, which contains the \module{py.std} package.}

\end{seealso}


%======================================================================
\section{PEP 338: Executing Modules as Scripts}

The \programopt{-m} switch added in Python 2.4 to execute a module as
a script gained a few more abilities.  Instead of being implemented in
C code inside the Python interpreter, the switch now uses an
implementation in a new module, \module{runpy}.

The \module{runpy} module implements a more sophisticated import
mechanism so that it's now possible to run modules in a package such
as \module{pychecker.checker}.  The module also supports alternative
import mechanisms such as the \module{zipimport} module.  This means
you can add a .zip archive's path to \code{sys.path} and then use the
\programopt{-m} switch to execute code from the archive.


\begin{seealso}

\seepep{338}{Executing modules as scripts}{PEP written and 
implemented by Nick Coghlan.}

\end{seealso}


%======================================================================
\section{PEP 341: Unified try/except/finally}

Until Python 2.5, the \keyword{try} statement came in two
flavours. You could use a \keyword{finally} block to ensure that code
is always executed, or one or more \keyword{except} blocks to catch 
specific exceptions.  You couldn't combine both \keyword{except} blocks and a
\keyword{finally} block, because generating the right bytecode for the
combined version was complicated and it wasn't clear what the
semantics of the combined should be.  

GvR spent some time working with Java, which does support the
equivalent of combining \keyword{except} blocks and a
\keyword{finally} block, and this clarified what the statement should
mean.  In Python 2.5, you can now write:

\begin{verbatim}
try:
    block-1 ...
except Exception1:
    handler-1 ...
except Exception2:
    handler-2 ...
else:
    else-block
finally:
    final-block 
\end{verbatim}

The code in \var{block-1} is executed.  If the code raises an
exception, the handlers are tried in order: \var{handler-1},
\var{handler-2}, ...  If no exception is raised, the \var{else-block}
is executed.  No matter what happened previously, the
\var{final-block} is executed once the code block is complete and any
raised exceptions handled.  Even if there's an error in an exception
handler or the \var{else-block} and a new exception is raised, the
\var{final-block} is still executed.

\begin{seealso}

\seepep{341}{Unifying try-except and try-finally}{PEP written by Georg Brandl; 
implementation by Thomas Lee.}

\end{seealso}


%======================================================================
\section{PEP 342: New Generator Features\label{section-generators}}

Python 2.5 adds a simple way to pass values \emph{into} a generator.
As introduced in Python 2.3, generators only produce output; once a
generator's code is invoked to create an iterator, there's no way to
pass any new information into the function when its execution is
resumed.  Sometimes the ability to pass in some information would be
useful.  Hackish solutions to this include making the generator's code
look at a global variable and then changing the global variable's
value, or passing in some mutable object that callers then modify.

To refresh your memory of basic generators, here's a simple example:

\begin{verbatim}
def counter (maximum):
    i = 0
    while i < maximum:
        yield i
        i += 1
\end{verbatim}

When you call \code{counter(10)}, the result is an iterator that
returns the values from 0 up to 9.  On encountering the
\keyword{yield} statement, the iterator returns the provided value and
suspends the function's execution, preserving the local variables.
Execution resumes on the following call to the iterator's 
\method{next()} method, picking up after the \keyword{yield} statement.

In Python 2.3, \keyword{yield} was a statement; it didn't return any
value.  In 2.5, \keyword{yield} is now an expression, returning a
value that can be assigned to a variable or otherwise operated on:

\begin{verbatim}
val = (yield i)
\end{verbatim}

I recommend that you always put parentheses around a \keyword{yield}
expression when you're doing something with the returned value, as in
the above example.  The parentheses aren't always necessary, but it's
easier to always add them instead of having to remember when they're
needed.\footnote{The exact rules are that a \keyword{yield}-expression must
always be parenthesized except when it occurs at the top-level
expression on the right-hand side of an assignment, meaning you can
write \code{val = yield i} but have to use parentheses when there's an
operation, as in \code{val = (yield i) + 12}.}

Values are sent into a generator by calling its
\method{send(\var{value})} method.  The generator's code is then
resumed and the \keyword{yield} expression returns the specified
\var{value}.  If the regular \method{next()} method is called, the
\keyword{yield} returns \constant{None}.

Here's the previous example, modified to allow changing the value of
the internal counter.

\begin{verbatim}
def counter (maximum):
    i = 0
    while i < maximum:
        val = (yield i)
        # If value provided, change counter
        if val is not None:
            i = val
        else:
            i += 1
\end{verbatim}

And here's an example of changing the counter:

\begin{verbatim}
>>> it = counter(10)
>>> print it.next()
0
>>> print it.next()
1
>>> print it.send(8)
8
>>> print it.next()
9
>>> print it.next()
Traceback (most recent call last):
  File ``t.py'', line 15, in ?
    print it.next()
StopIteration
\end{verbatim}

Because \keyword{yield} will often be returning \constant{None}, you
should always check for this case.  Don't just use its value in
expressions unless you're sure that the \method{send()} method
will be the only method used resume your generator function.

In addition to \method{send()}, there are two other new methods on
generators:

\begin{itemize}

  \item \method{throw(\var{type}, \var{value}=None,
  \var{traceback}=None)} is used to raise an exception inside the
  generator; the exception is raised by the \keyword{yield} expression
  where the generator's execution is paused.

  \item \method{close()} raises a new \exception{GeneratorExit}
  exception inside the generator to terminate the iteration.  
  On receiving this
  exception, the generator's code must either raise
  \exception{GeneratorExit} or \exception{StopIteration}; catching the 
  exception and doing anything else is illegal and will trigger
  a \exception{RuntimeError}.  \method{close()} will also be called by 
  Python's garbage collection when the generator is garbage-collected.

  If you need to run cleanup code in case of a \exception{GeneratorExit},
  I suggest using a \code{try: ... finally:} suite instead of 
  catching \exception{GeneratorExit}.

\end{itemize}

The cumulative effect of these changes is to turn generators from
one-way producers of information into both producers and consumers.

Generators also become \emph{coroutines}, a more generalized form of
subroutines.  Subroutines are entered at one point and exited at
another point (the top of the function, and a \keyword{return
statement}), but coroutines can be entered, exited, and resumed at
many different points (the \keyword{yield} statements).  We'll have to
figure out patterns for using coroutines effectively in Python.

The addition of the \method{close()} method has one side effect that
isn't obvious.  \method{close()} is called when a generator is
garbage-collected, so this means the generator's code gets one last
chance to run before the generator is destroyed.  This last chance
means that \code{try...finally} statements in generators can now be
guaranteed to work; the \keyword{finally} clause will now always get a
chance to run.  The syntactic restriction that you couldn't mix
\keyword{yield} statements with a \code{try...finally} suite has
therefore been removed.  This seems like a minor bit of language
trivia, but using generators and \code{try...finally} is actually
necessary in order to implement the  \keyword{with} statement
described by PEP 343.  We'll look at this new statement in the following 
section.

Another even more esoteric effect of this change: previously, the
\member{gi_frame} attribute of a generator was always a frame object.
It's now possible for \member{gi_frame} to be \code{None}
once the generator has been exhausted.

\begin{seealso}

\seepep{342}{Coroutines via Enhanced Generators}{PEP written by 
Guido van Rossum and Phillip J. Eby;
implemented by Phillip J. Eby.  Includes examples of 
some fancier uses of generators as coroutines.}

\seeurl{http://en.wikipedia.org/wiki/Coroutine}{The Wikipedia entry for 
coroutines.}

\seeurl{http://www.sidhe.org/\~{}dan/blog/archives/000178.html}{An
explanation of coroutines from a Perl point of view, written by Dan
Sugalski.}

\end{seealso}


%======================================================================
\section{PEP 343: The 'with' statement}

The \keyword{with} statement allows a clearer version of code that
uses \code{try...finally} blocks to ensure that clean-up code is
executed.

First, I'll discuss the statement as it will commonly be used, and
then a subsection will examine the implementation details and how to
write objects (called ``context managers'') that can be used with this
statement.  

The \keyword{with} statement is a new control-flow structure whose
basic structure is:

\begin{verbatim}
with expression [as variable]:
    with-block
\end{verbatim}

The expression is evaluated, and it should result in a type of object
that's called a context manager.  The context manager can return a
value that can optionally be bound to the name \var{variable}.  (Note
carefully: \var{variable} is \emph{not} assigned the result of
\var{expression}.)  One method of the context manager is run before
\var{with-block} is executed, and another method is run after the
block is done, even if the block raised an exception.

To enable the statement in Python 2.5, you need 
to add the following directive to your module:

\begin{verbatim}
from __future__ import with_statement
\end{verbatim}

The statement will always be enabled in Python 2.6.

Some standard Python objects can now behave as context managers. File
objects are one example:

\begin{verbatim}
with open('/etc/passwd', 'r') as f:
    for line in f:
        print line
        ... more processing code ...
\end{verbatim}

After this statement has executed, the file object in \var{f} will
have been automatically closed at this point, even if the 'for' loop
raised an exception part-way through the block.

The \module{threading} module's locks and condition variables 
also support the \keyword{with} statement:

\begin{verbatim}
lock = threading.Lock()
with lock:
    # Critical section of code
    ...
\end{verbatim}

The lock is acquired before the block is executed, and always released once 
the block is complete.

The \module{decimal} module's contexts, which encapsulate the desired
precision and rounding characteristics for computations, can also be
used as context managers.

\begin{verbatim}
import decimal

# Displays with default precision of 28 digits
v1 = decimal.Decimal('578')
print v1.sqrt()

with decimal.Context(prec=16):
    # All code in this block uses a precision of 16 digits.
    # The original context is restored on exiting the block.
    print v1.sqrt()
\end{verbatim}

\subsection{Writing Context Managers}

Under the hood, the \keyword{with} statement is fairly complicated.
Most people will only use \keyword{with} in company with
existing objects that are documented to work as context managers, and
don't need to know these details, so you can skip the following section if
you like.  Authors of new context managers will need to understand the
details of the underlying implementation.

A high-level explanation of the context management protocol is:

\begin{itemize}
\item The expression is evaluated and should result in an object
that's a context manager, meaning that it has a 
\method{__context__()} method.

\item This object's \method{__context__()} method is called, and must
return a context object.  

\item The context's \method{__enter__()} method is called. 
The value returned is assigned to \var{VAR}.  If no \code{as \var{VAR}} 
clause is present, the value is simply discarded.

\item The code in \var{BLOCK} is executed.

\item If \var{BLOCK} raises an exception, the context object's
\method{__exit__(\var{type}, \var{value}, \var{traceback})} is called
with the exception's information, the same values returned by
\function{sys.exc_info()}.  The method's return value
controls whether the exception is re-raised: any false value 
re-raises the exception, and \code{True} will result in suppressing it.
You'll only rarely want to suppress the exception; the 
author of the code containing the \keyword{with} statement will 
never realize anything went wrong.

\item If \var{BLOCK} didn't raise an exception, 
the context object's \method{__exit__()} is still called,
but \var{type}, \var{value}, and \var{traceback} are all \code{None}.

\end{itemize}

Let's think through an example.  I won't present detailed code but
will only sketch the necessary code.  The example will be writing a
context manager for a database that supports transactions.

(For people unfamiliar with database terminology: a set of changes to
the database are grouped into a transaction.  Transactions can be
either committed, meaning that all the changes are written into the
database, or rolled back, meaning that the changes are all discarded
and the database is unchanged.  See any database textbook for more
information.)
% XXX find a shorter reference?

Let's assume there's an object representing a database connection.
Our goal will be to let the user write code like this:

\begin{verbatim}
db_connection = DatabaseConnection()
with db_connection as cursor:
    cursor.execute('insert into ...')
    cursor.execute('delete from ...')
    # ... more operations ...
\end{verbatim}

The transaction should either be committed if the code in the block
runs flawlessly, or rolled back if there's an exception.

First, the \class{DatabaseConnection} needs a \method{__context__()}
method.  Sometimes an object can be its own context manager and can
simply return \code{self}; the \module{threading} module's lock objects 
can do this.  For our database example, though, we need to 
create a new object; I'll call this class \class{DatabaseContext}.
Our \method{__context__()} must therefore look like this:

\begin{verbatim}
class DatabaseConnection:
    ...
    def __context__ (self):
        return DatabaseContext(self)

    # Database interface
    def cursor (self):
        "Returns a cursor object and starts a new transaction"
    def commit (self):
        "Commits current transaction"
    def rollback (self):
        "Rolls back current transaction"
\end{verbatim}

The context needs the connection object so that the connection
object's \method{commit()} or \method{rollback()} methods can be
called:

\begin{verbatim}
class DatabaseContext:
    def __init__ (self, connection):
        self.connection = connection
\end{verbatim}

The \method {__enter__()} method is pretty easy, having only
to start a new transaction.  In this example,
the resulting cursor object would be a useful result,
so the method will return it.  The user can 
then add \code{as cursor} to their \keyword{with} statement
to bind the cursor to a variable name.

\begin{verbatim}
class DatabaseContext:
    ...
    def __enter__ (self):
        # Code to start a new transaction
        cursor = self.connection.cursor()
        return cursor
\end{verbatim}

The \method{__exit__()} method is the most complicated because it's
where most of the work has to be done.  The method has to check if an
exception occurred.  If there was no exception, the transaction is
committed.  The transaction is rolled back if there was an exception.
Here the code will just fall off the end of the function, returning 
the default value of \code{None}.  \code{None} is false, so the exception
will be re-raised automatically.  If you wished, you could be more explicit
and add a \keyword{return} at the marked location.

\begin{verbatim}
class DatabaseContext:
    ...
    def __exit__ (self, type, value, tb):
        if tb is None:
            # No exception, so commit
            self.connection.commit()
        else:
            # Exception occurred, so rollback.
            self.connection.rollback()
            # return False
\end{verbatim}


\subsection{The contextlib module\label{module-contextlib}}

The new \module{contextlib} module provides some functions and a
decorator that are useful for writing context managers.

The decorator is called \function{contextmanager}, and lets you write
a simple context manager as a generator.  The generator should yield
exactly one value.  The code up to the \keyword{yield} will be
executed as the \method{__enter__()} method, and the value yielded
will be the method's return value that will get bound to the variable
in the \keyword{with} statement's \keyword{as} clause, if any.  The
code after the \keyword{yield} will be executed in the
\method{__exit__()} method.  Any exception raised in the block 
will be raised by the \keyword{yield} statement.

Our database example from the previous section could be written 
using this decorator as:

\begin{verbatim}
from contextlib import contextmanager

@contextmanager
def db_transaction (connection):
    cursor = connection.cursor()
    try:
        yield cursor
    except:
        connection.rollback()
        raise
    else:
        connection.commit()

db = DatabaseConnection()
with db_transaction(db) as cursor:
    ...
\end{verbatim}

There's a \function{nested(\var{mgr1}, \var{mgr2}, ...)} manager that 
combines a number of context managers so you don't need to write 
nested \keyword{with} statements.  This example
both uses a database transaction and also acquires a thread lock:

\begin{verbatim}
lock = threading.Lock()
with nested (db_transaction(db), lock) as (cursor, locked):
    ...
\end{verbatim}

Finally, the \function{closing(\var{object})} context manager 
returns \var{object} so that it can be bound to a variable,
and calls \code{\var{object}.close()} at the end of the block.

\begin{verbatim}
with closing(open('/tmp/file', 'r')) as f:
    for line in f:
        ... 
\end{verbatim}

\begin{seealso}

\seepep{343}{The ``with'' statement}{PEP written by Guido van Rossum
and Nick Coghlan; implemented by Mike Bland, Guido van Rossum, and
Neal Norwitz.  The PEP shows the code generated for a \keyword{with}
statement, which can be helpful in learning how context managers
work.}

\seeurl{../lib/module-contextlib.html}{The documentation 
for the \module{contextlib} module.}

\end{seealso}


%======================================================================
\section{PEP 352: Exceptions as New-Style Classes}

Exception classes can now be new-style classes, not just classic
classes, and the built-in \exception{Exception} class and all the
standard built-in exceptions (\exception{NameError},
\exception{ValueError}, etc.) are now new-style classes.

The inheritance hierarchy for exceptions has been rearranged a bit.
In 2.5, the inheritance relationships are:

\begin{verbatim}
BaseException       # New in Python 2.5
|- KeyboardInterrupt
|- SystemExit
|- Exception
   |- (all other current built-in exceptions)
\end{verbatim}

This rearrangement was done because people often want to catch all
exceptions that indicate program errors.  \exception{KeyboardInterrupt} and
\exception{SystemExit} aren't errors, though, and usually represent an explicit
action such as the user hitting Control-C or code calling
\function{sys.exit()}.  A bare \code{except:} will catch all exceptions,
so you commonly need to list \exception{KeyboardInterrupt} and
\exception{SystemExit} in order to re-raise them.  The usual pattern is:

\begin{verbatim}
try:
    ...
except (KeyboardInterrupt, SystemExit):
    raise
except: 
    # Log error...  
    # Continue running program...
\end{verbatim}

In Python 2.5, you can now write \code{except Exception} to achieve
the same result, catching all the exceptions that usually indicate errors 
but leaving \exception{KeyboardInterrupt} and
\exception{SystemExit} alone.  As in previous versions,
a bare \code{except:} still catches all exceptions.

The goal for Python 3.0 is to require any class raised as an exception
to derive from \exception{BaseException} or some descendant of
\exception{BaseException}, and future releases in the
Python 2.x series may begin to enforce this constraint.  Therefore, I
suggest you begin making all your exception classes derive from
\exception{Exception} now.  It's been suggested that the bare
\code{except:} form should be removed in Python 3.0, but Guido van~Rossum
hasn't decided whether to do this or not.

Raising of strings as exceptions, as in the statement \code{raise
"Error occurred"}, is deprecated in Python 2.5 and will trigger a
warning.  The aim is to be able to remove the string-exception feature
in a few releases.


\begin{seealso}

\seepep{352}{Required Superclass for Exceptions}{PEP written by 
Brett Cannon and Guido van Rossum; implemented by Brett Cannon.}

\end{seealso}


%======================================================================
\section{PEP 353: Using ssize_t as the index type\label{section-353}}

A wide-ranging change to Python's C API, using a new 
\ctype{Py_ssize_t} type definition instead of \ctype{int}, 
will permit the interpreter to handle more data on 64-bit platforms.
This change doesn't affect Python's capacity on 32-bit platforms.

Various pieces of the Python interpreter used C's \ctype{int} type to
store sizes or counts; for example, the number of items in a list or
tuple were stored in an \ctype{int}.  The C compilers for most 64-bit
platforms still define \ctype{int} as a 32-bit type, so that meant
that lists could only hold up to \code{2**31 - 1} = 2147483647 items.
(There are actually a few different programming models that 64-bit C
compilers can use -- see
\url{http://www.unix.org/version2/whatsnew/lp64_wp.html} for a
discussion -- but the most commonly available model leaves \ctype{int}
as 32 bits.)

A limit of 2147483647 items doesn't really matter on a 32-bit platform
because you'll run out of memory before hitting the length limit.
Each list item requires space for a pointer, which is 4 bytes, plus
space for a \ctype{PyObject} representing the item.  2147483647*4 is
already more bytes than a 32-bit address space can contain.

It's possible to address that much memory on a 64-bit platform,
however.  The pointers for a list that size would only require 16GiB
of space, so it's not unreasonable that Python programmers might
construct lists that large.  Therefore, the Python interpreter had to
be changed to use some type other than \ctype{int}, and this will be a
64-bit type on 64-bit platforms.  The change will cause
incompatibilities on 64-bit machines, so it was deemed worth making
the transition now, while the number of 64-bit users is still
relatively small.  (In 5 or 10 years, we may \emph{all} be on 64-bit
machines, and the transition would be more painful then.)

This change most strongly affects authors of C extension modules.  
Python strings and container types such as lists and tuples 
now use \ctype{Py_ssize_t} to store their size.  
Functions such as \cfunction{PyList_Size()} 
now return \ctype{Py_ssize_t}.  Code in extension modules
may therefore need to have some variables changed to
\ctype{Py_ssize_t}.  

The \cfunction{PyArg_ParseTuple()} and \cfunction{Py_BuildValue()} functions
have a new conversion code, \samp{n}, for \ctype{Py_ssize_t}.  
\cfunction{PyArg_ParseTuple()}'s \samp{s\#} and \samp{t\#} still output
\ctype{int} by default, but you can define the macro 
\csimplemacro{PY_SSIZE_T_CLEAN} before including \file{Python.h} 
to make them return \ctype{Py_ssize_t}.

\pep{353} has a section on conversion guidelines that 
extension authors should read to learn about supporting 64-bit
platforms.

\begin{seealso}

\seepep{353}{Using ssize_t as the index type}{PEP written and implemented by Martin von~L\"owis.}

\end{seealso}


%======================================================================
\section{PEP 357: The '__index__' method}

The NumPy developers had a problem that could only be solved by adding
a new special method, \method{__index__}.  When using slice notation,
as in \code{[\var{start}:\var{stop}:\var{step}]}, the values of the
\var{start}, \var{stop}, and \var{step} indexes must all be either
integers or long integers.  NumPy defines a variety of specialized
integer types corresponding to unsigned and signed integers of 8, 16,
32, and 64 bits, but there was no way to signal that these types could
be used as slice indexes.

Slicing can't just use the existing \method{__int__} method because
that method is also used to implement coercion to integers.  If
slicing used \method{__int__}, floating-point numbers would also
become legal slice indexes and that's clearly an undesirable
behaviour.

Instead, a new special method called \method{__index__} was added.  It
takes no arguments and returns an integer giving the slice index to
use.  For example:

\begin{verbatim}
class C:
    def __index__ (self):
        return self.value  
\end{verbatim}

The return value must be either a Python integer or long integer.
The interpreter will check that the type returned is correct, and
raises a \exception{TypeError} if this requirement isn't met.

A corresponding \member{nb_index} slot was added to the C-level
\ctype{PyNumberMethods} structure to let C extensions implement this
protocol.  \cfunction{PyNumber_Index(\var{obj})} can be used in
extension code to call the \method{__index__} function and retrieve
its result.

\begin{seealso}

\seepep{357}{Allowing Any Object to be Used for Slicing}{PEP written 
and implemented by Travis Oliphant.}

\end{seealso}


%======================================================================
\section{Other Language Changes}

Here are all of the changes that Python 2.5 makes to the core Python
language.

\begin{itemize}

\item The \class{dict} type has a new hook for letting subclasses
provide a default value when a key isn't contained in the dictionary.
When a key isn't found, the dictionary's
\method{__missing__(\var{key})}
method will be called.  This hook is used to implement
the new \class{defaultdict} class in the \module{collections}
module.  The following example defines a dictionary 
that returns zero for any missing key:

\begin{verbatim}
class zerodict (dict):
    def __missing__ (self, key):
        return 0

d = zerodict({1:1, 2:2})
print d[1], d[2]   # Prints 1, 2
print d[3], d[4]   # Prints 0, 0
\end{verbatim}

\item The \function{min()} and \function{max()} built-in functions
gained a \code{key} keyword argument analogous to the \code{key}
argument for \method{sort()}.  This argument supplies a function that
takes a single argument and is called for every value in the list;
\function{min()}/\function{max()} will return the element with the 
smallest/largest return value from this function.
For example, to find the longest string in a list, you can do:

\begin{verbatim}
L = ['medium', 'longest', 'short']
# Prints 'longest'
print max(L, key=len)              
# Prints 'short', because lexicographically 'short' has the largest value
print max(L)         
\end{verbatim}

(Contributed by Steven Bethard and Raymond Hettinger.)

\item Two new built-in functions, \function{any()} and
\function{all()}, evaluate whether an iterator contains any true or
false values.  \function{any()} returns \constant{True} if any value
returned by the iterator is true; otherwise it will return
\constant{False}.  \function{all()} returns \constant{True} only if
all of the values returned by the iterator evaluate as being true.
(Suggested by GvR, and implemented by Raymond Hettinger.)

\item ASCII is now the default encoding for modules.  It's now 
a syntax error if a module contains string literals with 8-bit
characters but doesn't have an encoding declaration.  In Python 2.4
this triggered a warning, not a syntax error.  See \pep{263} 
for how to declare a module's encoding; for example, you might add 
a line like this near the top of the source file:

\begin{verbatim}
# -*- coding: latin1 -*-
\end{verbatim}

\item The list of base classes in a class definition can now be empty.  
As an example, this is now legal:

\begin{verbatim}
class C():
    pass
\end{verbatim}
(Implemented by Brett Cannon.)

\end{itemize}


%======================================================================
\subsection{Interactive Interpreter Changes}

In the interactive interpreter, \code{quit} and \code{exit} 
have long been strings so that new users get a somewhat helpful message
when they try to quit:

\begin{verbatim}
>>> quit
'Use Ctrl-D (i.e. EOF) to exit.'
\end{verbatim}

In Python 2.5, \code{quit} and \code{exit} are now objects that still
produce string representations of themselves, but are also callable.
Newbies who try \code{quit()} or \code{exit()} will now exit the
interpreter as they expect.  (Implemented by Georg Brandl.)


%======================================================================
\subsection{Optimizations}

\begin{itemize}

\item When they were introduced 
in Python 2.4, the built-in \class{set} and \class{frozenset} types
were built on top of Python's dictionary type.  
In 2.5 the internal data structure has been customized for implementing sets,
and as a result sets will use a third less memory and are somewhat faster.
(Implemented by Raymond Hettinger.)

\item The performance of some Unicode operations, such as 
character map decoding, has been improved.
% Patch 1313939

\item The code generator's peephole optimizer now performs
simple constant folding in expressions.  If you write something like
\code{a = 2+3}, the code generator will do the arithmetic and produce
code corresponding to \code{a = 5}.

\end{itemize}

The net result of the 2.5 optimizations is that Python 2.5 runs the
pystone benchmark around XXX\% faster than Python 2.4.


%======================================================================
\section{New, Improved, and Deprecated Modules}

The standard library received many enhancements and bug fixes in
Python 2.5.  Here's a partial list of the most notable changes, sorted
alphabetically by module name. Consult the \file{Misc/NEWS} file in
the source tree for a more complete list of changes, or look through
the SVN logs for all the details.

\begin{itemize}

% the cPickle module no longer accepts the deprecated None option in the
% args tuple returned by __reduce__().

% XXX csv module improvements

% XXX datetime.datetime() now has a strptime class method which can be used to
% create datetime object using a string and format.

% XXX fileinput: opening hook used to control how files are opened.
% .input() now has a mode parameter
% now has a fileno() function
% accepts Unicode filenames

\item The \module{audioop} module now supports the a-LAW encoding,
and the code for u-LAW encoding has been improved.  (Contributed by
Lars Immisch.)

\item The \module{collections} module gained a new type,
\class{defaultdict}, that subclasses the standard \class{dict}
type.  The new type mostly behaves like a dictionary but constructs a
default value when a key isn't present, automatically adding it to the
dictionary for the requested key value.

The first argument to \class{defaultdict}'s constructor is a factory
function that gets called whenever a key is requested but not found.
This factory function receives no arguments, so you can use built-in
type constructors such as \function{list()} or \function{int()}.  For
example, 
you can make an index of words based on their initial letter like this:

\begin{verbatim}
words = """Nel mezzo del cammin di nostra vita
mi ritrovai per una selva oscura
che la diritta via era smarrita""".lower().split()

index = defaultdict(list)

for w in words:
    init_letter = w[0]
    index[init_letter].append(w)
\end{verbatim}

Printing \code{index} results in the following output:

\begin{verbatim}
defaultdict(<type 'list'>, {'c': ['cammin', 'che'], 'e': ['era'], 
        'd': ['del', 'di', 'diritta'], 'm': ['mezzo', 'mi'], 
        'l': ['la'], 'o': ['oscura'], 'n': ['nel', 'nostra'], 
        'p': ['per'], 's': ['selva', 'smarrita'], 
        'r': ['ritrovai'], 'u': ['una'], 'v': ['vita', 'via']}
\end{verbatim}

The \class{deque} double-ended queue type supplied by the
\module{collections} module now has a \method{remove(\var{value})}
method that removes the first occurrence of \var{value} in the queue,
raising \exception{ValueError} if the value isn't found.

\item The \module{contextlib} module contains helper functions for use 
with the new \keyword{with} statement.  See section~\ref{module-contextlib}
for more about this module.  (Contributed by Phillip J. Eby.)

\item The \module{cProfile} module is a C implementation of 
the existing \module{profile} module that has much lower overhead.
The module's interface is the same as \module{profile}: you run
\code{cProfile.run('main()')} to profile a function, can save profile
data to a file, etc.  It's not yet known if the Hotshot profiler,
which is also written in C but doesn't match the \module{profile}
module's interface, will continue to be maintained in future versions
of Python.  (Contributed by Armin Rigo.)

\item In the \module{gc} module, the new \function{get_count()} function
returns a 3-tuple containing the current collection counts for the
three GC generations.  This is accounting information for the garbage
collector; when these counts reach a specified threshold, a garbage
collection sweep will be made.  The existing \function{gc.collect()}
function now takes an optional \var{generation} argument of 0, 1, or 2
to specify which generation to collect.

\item The \function{nsmallest()} and 
\function{nlargest()} functions in the \module{heapq} module 
now support a \code{key} keyword argument similar to the one
provided by the \function{min()}/\function{max()} functions
and the \method{sort()} methods.  For example:
Example:

\begin{verbatim}
>>> import heapq
>>> L = ["short", 'medium', 'longest', 'longer still']
>>> heapq.nsmallest(2, L)  # Return two lowest elements, lexicographically
['longer still', 'longest']
>>> heapq.nsmallest(2, L, key=len)   # Return two shortest elements
['short', 'medium']
\end{verbatim}

(Contributed by Raymond Hettinger.)

\item The \function{itertools.islice()} function now accepts
\code{None} for the start and step arguments.  This makes it more
compatible with the attributes of slice objects, so that you can now write
the following:

\begin{verbatim}
s = slice(5)     # Create slice object
itertools.islice(iterable, s.start, s.stop, s.step)
\end{verbatim}

(Contributed by Raymond Hettinger.)

\item The \module{nis} module now supports accessing domains other
than the system default domain by supplying a \var{domain} argument to
the \function{nis.match()} and \function{nis.maps()} functions.
(Contributed by Ben Bell.)

\item The \module{operator} module's \function{itemgetter()} 
and \function{attrgetter()} functions now support multiple fields.  
A call such as \code{operator.attrgetter('a', 'b')}
will return a function 
that retrieves the \member{a} and \member{b} attributes.  Combining 
this new feature with the \method{sort()} method's \code{key} parameter 
lets you easily sort lists using multiple fields.
(Contributed by Raymond Hettinger.)


\item The \module{os} module underwent several changes.  The
\member{stat_float_times} variable now defaults to true, meaning that
\function{os.stat()} will now return time values as floats.  (This
doesn't necessarily mean that \function{os.stat()} will return times
that are precise to fractions of a second; not all systems support
such precision.)

Constants named \member{os.SEEK_SET}, \member{os.SEEK_CUR}, and
\member{os.SEEK_END} have been added; these are the parameters to the
\function{os.lseek()} function.  Two new constants for locking are
\member{os.O_SHLOCK} and \member{os.O_EXLOCK}.

Two new functions, \function{wait3()} and \function{wait4()}, were
added.  They're similar the \function{waitpid()} function which waits
for a child process to exit and returns a tuple of the process ID and
its exit status, but \function{wait3()} and \function{wait4()} return
additional information.  \function{wait3()} doesn't take a process ID
as input, so it waits for any child process to exit and returns a
3-tuple of \var{process-id}, \var{exit-status}, \var{resource-usage}
as returned from the \function{resource.getrusage()} function.
\function{wait4(\var{pid})} does take a process ID.
(Contributed by Chad J. Schroeder.)

On FreeBSD, the \function{os.stat()} function now returns 
times with nanosecond resolution, and the returned object
now has \member{st_gen} and \member{st_birthtime}.
The \member{st_flags} member is also available, if the platform supports it.
(Contributed by Antti Louko and  Diego Petten\`o.)
% (Patch 1180695, 1212117)

\item The old \module{regex} and \module{regsub} modules, which have been 
deprecated ever since Python 2.0, have finally been deleted.  
Other deleted modules: \module{statcache}, \module{tzparse},
\module{whrandom}.

\item The \file{lib-old} directory,
which includes ancient modules such as \module{dircmp} and
\module{ni}, was also deleted.  \file{lib-old} wasn't on the default
\code{sys.path}, so unless your programs explicitly added the directory to 
\code{sys.path}, this removal shouldn't affect your code.

\item The \module{socket} module now supports \constant{AF_NETLINK}
sockets on Linux, thanks to a patch from Philippe Biondi.  
Netlink sockets are a Linux-specific mechanism for communications
between a user-space process and kernel code; an introductory 
article about them is at \url{http://www.linuxjournal.com/article/7356}.
In Python code, netlink addresses are represented as a tuple of 2 integers, 
\code{(\var{pid}, \var{group_mask})}.

Socket objects also gained accessor methods \method{getfamily()}, 
\method{gettype()}, and \method{getproto()} methods to retrieve the
family, type, and protocol values for the socket.

\item New module: \module{spwd} provides functions for accessing the
shadow password database on systems that support it.
% XXX give example

\item The Python developers switched from CVS to Subversion during the 2.5
development process.  Information about the exact build version is 
available as the \code{sys.subversion} variable, a 3-tuple
of \code{(\var{interpreter-name}, \var{branch-name}, \var{revision-range})}.
For example, at the time of writing 
my copy of 2.5 was reporting \code{('CPython', 'trunk', '45313:45315')}.

This information is also available to C extensions via the 
\cfunction{Py_GetBuildInfo()} function that returns a 
string of build information like this:
\code{"trunk:45355:45356M, Apr 13 2006, 07:42:19"}.  
(Contributed by Barry Warsaw.)

\item The \class{TarFile} class in the \module{tarfile} module now has
an \method{extractall()} method that extracts all members from the
archive into the current working directory.  It's also possible to set
a different directory as the extraction target, and to unpack only a
subset of the archive's members.  

A tarfile's compression can be autodetected by 
using the mode \code{'r|*'}.
% patch 918101
(Contributed by Lars Gust\"abel.)

\item The \module{unicodedata} module has been updated to use version 4.1.0
of the Unicode character database.  Version 3.2.0 is required 
by some specifications, so it's still available as 
\member{unicodedata.db_3_2_0}.

% patch #754022: Greatly enhanced webbrowser.py (by Oleg Broytmann).


\item The \module{xmlrpclib} module now supports returning 
      \class{datetime} objects for the XML-RPC date type.  Supply 
      \code{use_datetime=True} to the \function{loads()} function
      or the \class{Unmarshaller} class to enable this feature.
      (Contributed by Skip Montanaro.)
% Patch 1120353


\end{itemize}



%======================================================================
% whole new modules get described in subsections here

%======================================================================
\subsection{The ctypes package}

The \module{ctypes} package, written by Thomas Heller, has been added 
to the standard library.  \module{ctypes} lets you call arbitrary functions 
in shared libraries or DLLs.  Long-time users may remember the \module{dl} module, which 
provides functions for loading shared libraries and calling functions in them.  The \module{ctypes} package is much fancier.

To load a shared library or DLL, you must create an instance of the 
\class{CDLL} class and provide the name or path of the shared library
or DLL.  Once that's done, you can call arbitrary functions
by accessing them as attributes of the \class{CDLL} object.  

\begin{verbatim}
import ctypes

libc = ctypes.CDLL('libc.so.6')
result = libc.printf("Line of output\n")
\end{verbatim}

Type constructors for the various C types are provided: \function{c_int},
\function{c_float}, \function{c_double}, \function{c_char_p} (equivalent to \ctype{char *}), and so forth.  Unlike Python's types, the C versions are all mutable; you can assign to their \member{value} attribute
to change the wrapped value.  Python integers and strings will be automatically
converted to the corresponding C types, but for other types you 
must call the correct type constructor.  (And I mean \emph{must}; 
getting it wrong will often result in the interpreter crashing 
with a segmentation fault.)

You shouldn't use \function{c_char_p} with a Python string when the C function will be modifying the memory area, because Python strings are 
supposed to be immutable; breaking this rule will cause puzzling bugs.  When you need a modifiable memory area,
use \function{create_string_buffer()}:

\begin{verbatim}
s = "this is a string"
buf = ctypes.create_string_buffer(s)
libc.strfry(buf)
\end{verbatim}

C functions are assumed to return integers, but you can set
the \member{restype} attribute of the function object to 
change this:

\begin{verbatim}
>>> libc.atof('2.71828')
-1783957616
>>> libc.atof.restype = ctypes.c_double
>>> libc.atof('2.71828')
2.71828
\end{verbatim}

\module{ctypes} also provides a wrapper for Python's C API 
as the \code{ctypes.pythonapi} object.  This object does \emph{not} 
release the global interpreter lock before calling a function, because the lock must be held when calling into the interpreter's code.  
There's a \class{py_object()} type constructor that will create a 
\ctype{PyObject *} pointer.  A simple usage:

\begin{verbatim}
import ctypes

d = {}
ctypes.pythonapi.PyObject_SetItem(ctypes.py_object(d),
          ctypes.py_object("abc"),  ctypes.py_object(1))
# d is now {'abc', 1}.
\end{verbatim}

Don't forget to use \class{py_object()}; if it's omitted you end 
up with a segmentation fault.

\module{ctypes} has been around for a while, but people still write 
and distribution hand-coded extension modules because you can't rely on \module{ctypes} being present.
Perhaps developers will begin to write 
Python wrappers atop a library accessed through \module{ctypes} instead
of extension modules, now that \module{ctypes} is included with core Python.

\begin{seealso}

\seeurl{http://starship.python.net/crew/theller/ctypes/}
{The ctypes web page, with a tutorial, reference, and FAQ.}

\end{seealso}


%======================================================================
\subsection{The ElementTree package}

A subset of Fredrik Lundh's ElementTree library for processing XML has
been added to the standard library as \module{xmlcore.etree}.  The
available modules are
\module{ElementTree}, \module{ElementPath}, and
\module{ElementInclude} from ElementTree 1.2.6.   
The \module{cElementTree} accelerator module is also included. 

The rest of this section will provide a brief overview of using
ElementTree.  Full documentation for ElementTree is available at
\url{http://effbot.org/zone/element-index.htm}.

ElementTree represents an XML document as a tree of element nodes.
The text content of the document is stored as the \member{.text}
and \member{.tail} attributes of 
(This is one of the major differences between ElementTree and 
the Document Object Model; in the DOM there are many different
types of node, including \class{TextNode}.)

The most commonly used parsing function is \function{parse()}, that
takes either a string (assumed to contain a filename) or a file-like
object and returns an \class{ElementTree} instance:

\begin{verbatim}
from xmlcore.etree import ElementTree as ET

tree = ET.parse('ex-1.xml')

feed = urllib.urlopen(
          'http://planet.python.org/rss10.xml')
tree = ET.parse(feed)
\end{verbatim}

Once you have an \class{ElementTree} instance, you
can call its \method{getroot()} method to get the root \class{Element} node.

There's also an \function{XML()} function that takes a string literal
and returns an \class{Element} node (not an \class{ElementTree}).  
This function provides a tidy way to incorporate XML fragments,
approaching the convenience of an XML literal:

\begin{verbatim}
svg = et.XML("""<svg width="10px" version="1.0">
             </svg>""")
svg.set('height', '320px')
svg.append(elem1)
\end{verbatim}

Each XML element supports some dictionary-like and some list-like
access methods.  Dictionary-like operations are used to access attribute
values, and list-like operations are used to access child nodes.

\begin{tableii}{c|l}{code}{Operation}{Result}
  \lineii{elem[n]}{Returns n'th child element.}
  \lineii{elem[m:n]}{Returns list of m'th through n'th child elements.}
  \lineii{len(elem)}{Returns number of child elements.}
  \lineii{elem.getchildren()}{Returns list of child elements.}
  \lineii{elem.append(elem2)}{Adds \var{elem2} as a child.}
  \lineii{elem.insert(index, elem2)}{Inserts \var{elem2} at the specified location.}
  \lineii{del elem[n]}{Deletes n'th child element.}
  \lineii{elem.keys()}{Returns list of attribute names.}
  \lineii{elem.get(name)}{Returns value of attribute \var{name}.}
  \lineii{elem.set(name, value)}{Sets new value for attribute \var{name}.}
  \lineii{elem.attrib}{Retrieves the dictionary containing attributes.}
  \lineii{del elem.attrib[name]}{Deletes attribute \var{name}.}
\end{tableii}

Comments and processing instructions are also represented as
\class{Element} nodes.  To check if a node is a comment or processing
instructions:

\begin{verbatim}
if elem.tag is ET.Comment:
    ...
elif elem.tag is ET.ProcessingInstruction:
    ...
\end{verbatim}

To generate XML output, you should call the
\method{ElementTree.write()} method.  Like \function{parse()},
it can take either a string or a file-like object:

\begin{verbatim}
# Encoding is US-ASCII
tree.write('output.xml')

# Encoding is UTF-8
f = open('output.xml', 'w')
tree.write(f, 'utf-8')
\end{verbatim}

(Caution: the default encoding used for output is ASCII, which isn't
very useful for general XML work, raising an exception if there are
any characters with values greater than 127.  You should always
specify a different encoding such as UTF-8 that can handle any Unicode
character.)

This section is only a partial description of the ElementTree interfaces.
Please read the package's official documentation for more details.

\begin{seealso}

\seeurl{http://effbot.org/zone/element-index.htm}
{Official documentation for ElementTree.}


\end{seealso}


%======================================================================
\subsection{The hashlib package}

A new \module{hashlib} module, written by Gregory P. Smith, 
has been added to replace the
\module{md5} and \module{sha} modules.  \module{hashlib} adds support
for additional secure hashes (SHA-224, SHA-256, SHA-384, and SHA-512).
When available, the module uses OpenSSL for fast platform optimized
implementations of algorithms.  

The old \module{md5} and \module{sha} modules still exist as wrappers
around hashlib to preserve backwards compatibility.  The new module's
interface is very close to that of the old modules, but not identical.
The most significant difference is that the constructor functions
for creating new hashing objects are named differently.

\begin{verbatim}
# Old versions
h = md5.md5()   
h = md5.new()   

# New version 
h = hashlib.md5()

# Old versions
h = sha.sha()   
h = sha.new()   

# New version 
h = hashlib.sha1()

# Hash that weren't previously available
h = hashlib.sha224()
h = hashlib.sha256()
h = hashlib.sha384()
h = hashlib.sha512()

# Alternative form
h = hashlib.new('md5')          # Provide algorithm as a string
\end{verbatim}

Once a hash object has been created, its methods are the same as before:
\method{update(\var{string})} hashes the specified string into the 
current digest state, \method{digest()} and \method{hexdigest()}
return the digest value as a binary string or a string of hex digits,
and \method{copy()} returns a new hashing object with the same digest state.


%======================================================================
\subsection{The sqlite3 package}

The pysqlite module (\url{http://www.pysqlite.org}), a wrapper for the
SQLite embedded database, has been added to the standard library under
the package name \module{sqlite3}.  

SQLite is a C library that provides a SQL-language database that
stores data in disk files without requiring a separate server process.
pysqlite was written by Gerhard H\"aring and provides a SQL interface
compliant with the DB-API 2.0 specification described by
\pep{249}. This means that it should be possible to write the first
version of your applications using SQLite for data storage.  If
switching to a larger database such as PostgreSQL or Oracle is
later necessary, the switch should be relatively easy.

If you're compiling the Python source yourself, note that the source
tree doesn't include the SQLite code, only the wrapper module.
You'll need to have the SQLite libraries and headers installed before
compiling Python, and the build process will compile the module when
the necessary headers are available.

To use the module, you must first create a \class{Connection} object
that represents the database.  Here the data will be stored in the 
\file{/tmp/example} file:

\begin{verbatim}
conn = sqlite3.connect('/tmp/example')
\end{verbatim}

You can also supply the special name \samp{:memory:} to create
a database in RAM.

Once you have a \class{Connection}, you can create a \class{Cursor} 
object and call its \method{execute()} method to perform SQL commands:

\begin{verbatim}
c = conn.cursor()

# Create table
c.execute('''create table stocks
(date timestamp, trans varchar, symbol varchar,
 qty decimal, price decimal)''')

# Insert a row of data
c.execute("""insert into stocks
          values ('2006-01-05','BUY','RHAT',100,35.14)""")
\end{verbatim}    

Usually your SQL operations will need to use values from Python
variables.  You shouldn't assemble your query using Python's string
operations because doing so is insecure; it makes your program
vulnerable to an SQL injection attack.  

Instead, use SQLite's parameter substitution.  Put \samp{?} as a
placeholder wherever you want to use a value, and then provide a tuple
of values as the second argument to the cursor's \method{execute()}
method.  For example:

\begin{verbatim}    
# Never do this -- insecure!
symbol = 'IBM'
c.execute("... where symbol = '%s'" % symbol)

# Do this instead
t = (symbol,)
c.execute('select * from stocks where symbol=?', ('IBM',))

# Larger example
for t in (('2006-03-28', 'BUY', 'IBM', 1000, 45.00),
          ('2006-04-05', 'BUY', 'MSOFT', 1000, 72.00),
          ('2006-04-06', 'SELL', 'IBM', 500, 53.00),
         ):
    c.execute('insert into stocks values (?,?,?,?,?)', t)
\end{verbatim}

To retrieve data after executing a SELECT statement, you can either 
treat the cursor as an iterator, call the cursor's \method{fetchone()}
method to retrieve a single matching row, 
or call \method{fetchall()} to get a list of the matching rows.

This example uses the iterator form:

\begin{verbatim}
>>> c = conn.cursor()
>>> c.execute('select * from stocks order by price')
>>> for row in c:
...    print row
...
(u'2006-01-05', u'BUY', u'RHAT', 100, 35.140000000000001)
(u'2006-03-28', u'BUY', u'IBM', 1000, 45.0)
(u'2006-04-06', u'SELL', u'IBM', 500, 53.0)
(u'2006-04-05', u'BUY', u'MSOFT', 1000, 72.0)
>>>
\end{verbatim}

For more information about the SQL dialect supported by SQLite, see 
\url{http://www.sqlite.org}.

\begin{seealso}

\seeurl{http://www.pysqlite.org}
{The pysqlite web page.}

\seeurl{http://www.sqlite.org}
{The SQLite web page; the documentation describes the syntax and the
available data types for the supported SQL dialect.}

\seepep{249}{Database API Specification 2.0}{PEP written by
Marc-Andr\'e Lemburg.}

\end{seealso}


% ======================================================================
\section{Build and C API Changes}

Changes to Python's build process and to the C API include:

\begin{itemize}

\item The largest change to the C API came from \pep{353},
which modifies the interpreter to use a \ctype{Py_ssize_t} type
definition instead of \ctype{int}.  See the earlier
section~ref{section-353} for a discussion of this change.

\item The design of the bytecode compiler has changed a great deal, to
no longer generate bytecode by traversing the parse tree.  Instead
the parse tree is converted to an abstract syntax tree (or AST), and it is 
the abstract syntax tree that's traversed to produce the bytecode.

It's possible for Python code to obtain AST objects by using the 
\function{compile()} built-in and specifying \code{_ast.PyCF_ONLY_AST}
as the value of the 
\var{flags} parameter:

\begin{verbatim}
from _ast import PyCF_ONLY_AST
ast = compile("""a=0
for i in range(10):
    a += i
""", "<string>", 'exec', PyCF_ONLY_AST)

assignment = ast.body[0]
for_loop = ast.body[1]
\end{verbatim}

No documentation has been written for the AST code yet.  To start
learning about it, read the definition of the various AST nodes in
\file{Parser/Python.asdl}.  A Python script reads this file and
generates a set of C structure definitions in
\file{Include/Python-ast.h}.  The \cfunction{PyParser_ASTFromString()}
and \cfunction{PyParser_ASTFromFile()}, defined in
\file{Include/pythonrun.h}, take Python source as input and return the
root of an AST representing the contents.  This AST can then be turned
into a code object by \cfunction{PyAST_Compile()}.  For more
information, read the source code, and then ask questions on
python-dev.

% List of names taken from Jeremy's python-dev post at 
% http://mail.python.org/pipermail/python-dev/2005-October/057500.html
The AST code was developed under Jeremy Hylton's management, and
implemented by (in alphabetical order) Brett Cannon, Nick Coghlan,
Grant Edwards, John Ehresman, Kurt Kaiser, Neal Norwitz, Tim Peters,
Armin Rigo, and Neil Schemenauer, plus the participants in a number of
AST sprints at conferences such as PyCon.
 
\item The built-in set types now have an official C API.  Call
\cfunction{PySet_New()} and \cfunction{PyFrozenSet_New()} to create a
new set, \cfunction{PySet_Add()} and \cfunction{PySet_Discard()} to
add and remove elements, and \cfunction{PySet_Contains} and
\cfunction{PySet_Size} to examine the set's state.
(Contributed by Raymond Hettinger.)

\item C code can now obtain information about the exact revision
of the Python interpreter by calling the 
\cfunction{Py_GetBuildInfo()} function that returns a 
string of build information like this:
\code{"trunk:45355:45356M, Apr 13 2006, 07:42:19"}.  
(Contributed by Barry Warsaw.)

\item The CPython interpreter is still written in C, but 
the code can now be compiled with a {\Cpp} compiler without errors.  
(Implemented by Anthony Baxter, Martin von~L\"owis, Skip Montanaro.)

\item The \cfunction{PyRange_New()} function was removed.  It was
never documented, never used in the core code, and had dangerously lax
error checking.

\end{itemize}


%======================================================================
\subsection{Port-Specific Changes}

\begin{itemize}

\item MacOS X (10.3 and higher): dynamic loading of modules
now uses the \cfunction{dlopen()} function instead of MacOS-specific
functions.

\end{itemize}


%======================================================================
\section{Other Changes and Fixes \label{section-other}}

As usual, there were a bunch of other improvements and bugfixes
scattered throughout the source tree.  A search through the SVN change
logs finds there were XXX patches applied and YYY bugs fixed between
Python 2.4 and 2.5.  Both figures are likely to be underestimates.

Some of the more notable changes are:

\begin{itemize}

\item Evan Jones's patch to obmalloc, first described in a talk
at PyCon DC 2005, was applied.  Python 2.4 allocated small objects in
256K-sized arenas, but never freed arenas.  With this patch, Python
will free arenas when they're empty.  The net effect is that on some
platforms, when you allocate many objects, Python's memory usage may
actually drop when you delete them, and the memory may be returned to
the operating system.  (Implemented by Evan Jones, and reworked by Tim
Peters.)

Note that this change means extension modules need to be more careful
with how they allocate memory.  Python's API has many different
functions for allocating memory that are grouped into families.  For
example, \cfunction{PyMem_Malloc()}, \cfunction{PyMem_Realloc()}, and
\cfunction{PyMem_Free()} are one family that allocates raw memory,
while \cfunction{PyObject_Malloc()}, \cfunction{PyObject_Realloc()},
and \cfunction{PyObject_Free()} are another family that's supposed to
be used for creating Python objects.  

Previously these different families all reduced to the platform's
\cfunction{malloc()} and \cfunction{free()} functions.  This meant 
it didn't matter if you got things wrong and allocated memory with the
\cfunction{PyMem} function but freed it with the \cfunction{PyObject}
function.  With the obmalloc change, these families now do different
things, and mismatches will probably result in a segfault.  You should
carefully test your C extension modules with Python 2.5.

\item Coverity, a company that markets a source code analysis tool
  called Prevent, provided the results of their examination of the Python
  source code.  The analysis found about 60 bugs that 
  were quickly fixed.  Many of the bugs were refcounting problems, often
  occurring in error-handling code.  See
  \url{http://scan.coverity.com} for the statistics.

\end{itemize}


%======================================================================
\section{Porting to Python 2.5}

This section lists previously described changes that may require
changes to your code:

\begin{itemize}

\item ASCII is now the default encoding for modules.  It's now 
a syntax error if a module contains string literals with 8-bit
characters but doesn't have an encoding declaration.  In Python 2.4
this triggered a warning, not a syntax error.

\item The \module{pickle} module no longer uses the deprecated \var{bin} parameter.

\item Previously, the \member{gi_frame} attribute of a generator
was always a frame object.  Because of the \pep{342} changes
described in section~\ref{section-generators}, it's now possible
for \member{gi_frame} to be \code{None}.

\item C API: Many functions now use \ctype{Py_ssize_t} 
instead of \ctype{int} to allow processing more data 
on 64-bit machines.  Extension code may need to make 
the same change to avoid warnings and to support 64-bit machines.
See the earlier
section~ref{section-353} for a discussion of this change.

\item C API: 
The obmalloc changes mean that 
you must be careful to not mix usage 
of the \cfunction{PyMem_*()} and \cfunction{PyObject_*()}
families of functions. Memory allocated with 
one family's \cfunction{*_Malloc()} must be 
freed with the corresponding family's \cfunction{*_Free()} function.

\end{itemize}


%======================================================================
\section{Acknowledgements \label{acks}}

The author would like to thank the following people for offering
suggestions, corrections and assistance with various drafts of this
article: Martin von~L\"owis, Mike Rovner, Thomas Wouters.

\end{document}