cpython/Lib/packaging/dist.py

769 lines
32 KiB
Python

"""Class representing the project being built/installed/etc."""
import os
import re
from packaging import logger
from packaging.util import strtobool, resolve_name
from packaging.config import Config
from packaging.errors import (PackagingOptionError, PackagingArgError,
PackagingModuleError, PackagingClassError)
from packaging.command import get_command_class, STANDARD_COMMANDS
from packaging.command.cmd import Command
from packaging.metadata import Metadata
from packaging.fancy_getopt import FancyGetopt
# Regex to define acceptable Packaging command names. This is not *quite*
# the same as a Python name -- leading underscores are not allowed. The fact
# that they're very similar is no coincidence: the default naming scheme is
# to look for a Python module named after the command.
command_re = re.compile(r'^[a-zA-Z]([a-zA-Z0-9_]*)$')
USAGE = """\
usage: %(script)s [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...]
or: %(script)s --help [cmd1 cmd2 ...]
or: %(script)s --help-commands
or: %(script)s cmd --help
"""
def gen_usage(script_name):
script = os.path.basename(script_name)
return USAGE % {'script': script}
class Distribution:
"""Class used to represent a project and work with it.
Most of the work hiding behind 'pysetup run' is really done within a
Distribution instance, which farms the work out to the commands
specified on the command line.
"""
# 'global_options' describes the command-line options that may be
# supplied to the setup script prior to any actual commands.
# Eg. "pysetup run -n" or "pysetup run --dry-run" both take advantage of
# these global options. This list should be kept to a bare minimum,
# since every global option is also valid as a command option -- and we
# don't want to pollute the commands with too many options that they
# have minimal control over.
global_options = [
('dry-run', 'n', "don't actually do anything"),
('help', 'h', "show detailed help message"),
('no-user-cfg', None, 'ignore pydistutils.cfg in your home directory'),
]
# 'common_usage' is a short (2-3 line) string describing the common
# usage of the setup script.
common_usage = """\
Common commands: (see '--help-commands' for more)
pysetup run build will build the project underneath 'build/'
pysetup run install will install the project
"""
# options that are not propagated to the commands
display_options = [
('help-commands', None,
"list all available commands"),
('use-2to3', None,
"use 2to3 to make source python 3.x compatible"),
('convert-2to3-doctests', None,
"use 2to3 to convert doctests in seperate text files"),
]
display_option_names = [x[0].replace('-', '_') for x in display_options]
# negative options are options that exclude other options
negative_opt = {}
# -- Creation/initialization methods -------------------------------
def __init__(self, attrs=None):
"""Construct a new Distribution instance: initialize all the
attributes of a Distribution, and then use 'attrs' (a dictionary
mapping attribute names to values) to assign some of those
attributes their "real" values. (Any attributes not mentioned in
'attrs' will be assigned to some null value: 0, None, an empty list
or dictionary, etc.) Most importantly, initialize the
'command_obj' attribute to the empty dictionary; this will be
filled in with real command objects by 'parse_command_line()'.
"""
# Default values for our command-line options
self.dry_run = False
self.help = False
for attr in self.display_option_names:
setattr(self, attr, False)
# Store the configuration
self.config = Config(self)
# Store the distribution metadata (name, version, author, and so
# forth) in a separate object -- we're getting to have enough
# information here (and enough command-line options) that it's
# worth it.
self.metadata = Metadata()
# 'cmdclass' maps command names to class objects, so we
# can 1) quickly figure out which class to instantiate when
# we need to create a new command object, and 2) have a way
# for the setup script to override command classes
self.cmdclass = {}
# 'script_name' and 'script_args' are usually set to sys.argv[0]
# and sys.argv[1:], but they can be overridden when the caller is
# not necessarily a setup script run from the command line.
self.script_name = None
self.script_args = None
# 'command_options' is where we store command options between
# parsing them (from config files, the command line, etc.) and when
# they are actually needed -- ie. when the command in question is
# instantiated. It is a dictionary of dictionaries of 2-tuples:
# command_options = { command_name : { option : (source, value) } }
self.command_options = {}
# 'dist_files' is the list of (command, pyversion, file) that
# have been created by any dist commands run so far. This is
# filled regardless of whether the run is dry or not. pyversion
# gives sysconfig.get_python_version() if the dist file is
# specific to a Python version, 'any' if it is good for all
# Python versions on the target platform, and '' for a source
# file. pyversion should not be used to specify minimum or
# maximum required Python versions; use the metainfo for that
# instead.
self.dist_files = []
# These options are really the business of various commands, rather
# than of the Distribution itself. We provide aliases for them in
# Distribution as a convenience to the developer.
self.packages = []
self.package_data = {}
self.package_dir = None
self.py_modules = []
self.libraries = []
self.headers = []
self.ext_modules = []
self.ext_package = None
self.include_dirs = []
self.extra_path = None
self.scripts = []
self.data_files = {}
self.password = ''
self.use_2to3 = False
self.convert_2to3_doctests = []
self.extra_files = []
# And now initialize bookkeeping stuff that can't be supplied by
# the caller at all. 'command_obj' maps command names to
# Command instances -- that's how we enforce that every command
# class is a singleton.
self.command_obj = {}
# 'have_run' maps command names to boolean values; it keeps track
# of whether we have actually run a particular command, to make it
# cheap to "run" a command whenever we think we might need to -- if
# it's already been done, no need for expensive filesystem
# operations, we just check the 'have_run' dictionary and carry on.
# It's only safe to query 'have_run' for a command class that has
# been instantiated -- a false value will be inserted when the
# command object is created, and replaced with a true value when
# the command is successfully run. Thus it's probably best to use
# '.get()' rather than a straight lookup.
self.have_run = {}
# Now we'll use the attrs dictionary (ultimately, keyword args from
# the setup script) to possibly override any or all of these
# distribution options.
if attrs is not None:
# Pull out the set of command options and work on them
# specifically. Note that this order guarantees that aliased
# command options will override any supplied redundantly
# through the general options dictionary.
options = attrs.get('options')
if options is not None:
del attrs['options']
for command, cmd_options in options.items():
opt_dict = self.get_option_dict(command)
for opt, val in cmd_options.items():
opt_dict[opt] = ("setup script", val)
# Now work on the rest of the attributes. Any attribute that's
# not already defined is invalid!
for key, val in attrs.items():
if self.metadata.is_metadata_field(key):
self.metadata[key] = val
elif hasattr(self, key):
setattr(self, key, val)
else:
logger.warning(
'unknown argument given to Distribution: %r', key)
# no-user-cfg is handled before other command line args
# because other args override the config files, and this
# one is needed before we can load the config files.
# If attrs['script_args'] wasn't passed, assume false.
#
# This also make sure we just look at the global options
self.want_user_cfg = True
if self.script_args is not None:
for arg in self.script_args:
if not arg.startswith('-'):
break
if arg == '--no-user-cfg':
self.want_user_cfg = False
break
self.finalize_options()
def get_option_dict(self, command):
"""Get the option dictionary for a given command. If that
command's option dictionary hasn't been created yet, then create it
and return the new dictionary; otherwise, return the existing
option dictionary.
"""
d = self.command_options.get(command)
if d is None:
d = self.command_options[command] = {}
return d
def get_fullname(self):
return self.metadata.get_fullname()
def dump_option_dicts(self, header=None, commands=None, indent=""):
from pprint import pformat
if commands is None: # dump all command option dicts
commands = sorted(self.command_options)
if header is not None:
logger.info(indent + header)
indent = indent + " "
if not commands:
logger.info(indent + "no commands known yet")
return
for cmd_name in commands:
opt_dict = self.command_options.get(cmd_name)
if opt_dict is None:
logger.info(indent + "no option dict for %r command",
cmd_name)
else:
logger.info(indent + "option dict for %r command:", cmd_name)
out = pformat(opt_dict)
for line in out.split('\n'):
logger.info(indent + " " + line)
# -- Config file finding/parsing methods ---------------------------
# XXX to be removed
def parse_config_files(self, filenames=None):
return self.config.parse_config_files(filenames)
def find_config_files(self):
return self.config.find_config_files()
# -- Command-line parsing methods ----------------------------------
def parse_command_line(self):
"""Parse the setup script's command line, taken from the
'script_args' instance attribute (which defaults to 'sys.argv[1:]'
-- see 'setup()' in run.py). This list is first processed for
"global options" -- options that set attributes of the Distribution
instance. Then, it is alternately scanned for Packaging commands
and options for that command. Each new command terminates the
options for the previous command. The allowed options for a
command are determined by the 'user_options' attribute of the
command class -- thus, we have to be able to load command classes
in order to parse the command line. Any error in that 'options'
attribute raises PackagingGetoptError; any error on the
command line raises PackagingArgError. If no Packaging commands
were found on the command line, raises PackagingArgError. Return
true if command line was successfully parsed and we should carry
on with executing commands; false if no errors but we shouldn't
execute commands (currently, this only happens if user asks for
help).
"""
#
# We now have enough information to show the Macintosh dialog
# that allows the user to interactively specify the "command line".
#
toplevel_options = self._get_toplevel_options()
# We have to parse the command line a bit at a time -- global
# options, then the first command, then its options, and so on --
# because each command will be handled by a different class, and
# the options that are valid for a particular class aren't known
# until we have loaded the command class, which doesn't happen
# until we know what the command is.
self.commands = []
parser = FancyGetopt(toplevel_options + self.display_options)
parser.set_negative_aliases(self.negative_opt)
args = parser.getopt(args=self.script_args, object=self)
option_order = parser.get_option_order()
# for display options we return immediately
if self.handle_display_options(option_order):
return
while args:
args = self._parse_command_opts(parser, args)
if args is None: # user asked for help (and got it)
return
# Handle the cases of --help as a "global" option, ie.
# "pysetup run --help" and "pysetup run --help command ...". For the
# former, we show global options (--dry-run, etc.)
# and display-only options (--name, --version, etc.); for the
# latter, we omit the display-only options and show help for
# each command listed on the command line.
if self.help:
self._show_help(parser,
display_options=len(self.commands) == 0,
commands=self.commands)
return
return True
def _get_toplevel_options(self):
"""Return the non-display options recognized at the top level.
This includes options that are recognized *only* at the top
level as well as options recognized for commands.
"""
return self.global_options
def _parse_command_opts(self, parser, args):
"""Parse the command-line options for a single command.
'parser' must be a FancyGetopt instance; 'args' must be the list
of arguments, starting with the current command (whose options
we are about to parse). Returns a new version of 'args' with
the next command at the front of the list; will be the empty
list if there are no more commands on the command line. Returns
None if the user asked for help on this command.
"""
# Pull the current command from the head of the command line
command = args[0]
if not command_re.match(command):
raise SystemExit("invalid command name %r" % command)
self.commands.append(command)
# Dig up the command class that implements this command, so we
# 1) know that it's a valid command, and 2) know which options
# it takes.
try:
cmd_class = get_command_class(command)
except PackagingModuleError as msg:
raise PackagingArgError(msg)
# XXX We want to push this in packaging.command
#
# Require that the command class be derived from Command -- want
# to be sure that the basic "command" interface is implemented.
for meth in ('initialize_options', 'finalize_options', 'run'):
if hasattr(cmd_class, meth):
continue
raise PackagingClassError(
'command %r must implement %r' % (cmd_class, meth))
# Also make sure that the command object provides a list of its
# known options.
if not (hasattr(cmd_class, 'user_options') and
isinstance(cmd_class.user_options, list)):
raise PackagingClassError(
"command class %s must provide "
"'user_options' attribute (a list of tuples)" % cmd_class)
# If the command class has a list of negative alias options,
# merge it in with the global negative aliases.
negative_opt = self.negative_opt
if hasattr(cmd_class, 'negative_opt'):
negative_opt = negative_opt.copy()
negative_opt.update(cmd_class.negative_opt)
# Check for help_options in command class. They have a different
# format (tuple of four) so we need to preprocess them here.
if (hasattr(cmd_class, 'help_options') and
isinstance(cmd_class.help_options, list)):
help_options = cmd_class.help_options[:]
else:
help_options = []
# All commands support the global options too, just by adding
# in 'global_options'.
parser.set_option_table(self.global_options +
cmd_class.user_options +
help_options)
parser.set_negative_aliases(negative_opt)
args, opts = parser.getopt(args[1:])
if hasattr(opts, 'help') and opts.help:
self._show_help(parser, display_options=False,
commands=[cmd_class])
return
if (hasattr(cmd_class, 'help_options') and
isinstance(cmd_class.help_options, list)):
help_option_found = False
for help_option, short, desc, func in cmd_class.help_options:
if hasattr(opts, help_option.replace('-', '_')):
help_option_found = True
if hasattr(func, '__call__'):
func()
else:
raise PackagingClassError(
"invalid help function %r for help option %r: "
"must be a callable object (function, etc.)"
% (func, help_option))
if help_option_found:
return
# Put the options from the command line into their official
# holding pen, the 'command_options' dictionary.
opt_dict = self.get_option_dict(command)
for name, value in vars(opts).items():
opt_dict[name] = ("command line", value)
return args
def finalize_options(self):
"""Set final values for all the options on the Distribution
instance, analogous to the .finalize_options() method of Command
objects.
"""
if getattr(self, 'convert_2to3_doctests', None):
self.convert_2to3_doctests = [os.path.join(p)
for p in self.convert_2to3_doctests]
else:
self.convert_2to3_doctests = []
def _show_help(self, parser, global_options=True, display_options=True,
commands=[]):
"""Show help for the setup script command line in the form of
several lists of command-line options. 'parser' should be a
FancyGetopt instance; do not expect it to be returned in the
same state, as its option table will be reset to make it
generate the correct help text.
If 'global_options' is true, lists the global options:
--dry-run, etc. If 'display_options' is true, lists
the "display-only" options: --help-commands. Finally,
lists per-command help for every command name or command class
in 'commands'.
"""
if global_options:
if display_options:
options = self._get_toplevel_options()
else:
options = self.global_options
parser.set_option_table(options)
parser.print_help(self.common_usage + "\nGlobal options:")
print()
if display_options:
parser.set_option_table(self.display_options)
parser.print_help(
"Information display options (just display " +
"information, ignore any commands)")
print()
for command in self.commands:
if isinstance(command, type) and issubclass(command, Command):
cls = command
else:
cls = get_command_class(command)
if (hasattr(cls, 'help_options') and
isinstance(cls.help_options, list)):
parser.set_option_table(cls.user_options + cls.help_options)
else:
parser.set_option_table(cls.user_options)
parser.print_help("Options for %r command:" % cls.__name__)
print()
print(gen_usage(self.script_name))
def handle_display_options(self, option_order):
"""If there were any non-global "display-only" options
(--help-commands) on the command line, display the requested info and
return true; else return false.
"""
# User just wants a list of commands -- we'll print it out and stop
# processing now (ie. if they ran "setup --help-commands foo bar",
# we ignore "foo bar").
if self.help_commands:
self.print_commands()
print()
print(gen_usage(self.script_name))
return True
# If user supplied any of the "display metadata" options, then
# display that metadata in the order in which the user supplied the
# metadata options.
any_display_options = False
is_display_option = set()
for option in self.display_options:
is_display_option.add(option[0])
for opt, val in option_order:
if val and opt in is_display_option:
opt = opt.replace('-', '_')
value = self.metadata[opt]
if opt in ('keywords', 'platform'):
print(','.join(value))
elif opt in ('classifier', 'provides', 'requires',
'obsoletes'):
print('\n'.join(value))
else:
print(value)
any_display_options = True
return any_display_options
def print_command_list(self, commands, header, max_length):
"""Print a subset of the list of all commands -- used by
'print_commands()'.
"""
print(header + ":")
for cmd in commands:
cls = self.cmdclass.get(cmd) or get_command_class(cmd)
description = getattr(cls, 'description',
'(no description available)')
print(" %-*s %s" % (max_length, cmd, description))
def _get_command_groups(self):
"""Helper function to retrieve all the command class names divided
into standard commands (listed in
packaging2.command.STANDARD_COMMANDS) and extra commands (given in
self.cmdclass and not standard commands).
"""
extra_commands = [cmd for cmd in self.cmdclass
if cmd not in STANDARD_COMMANDS]
return STANDARD_COMMANDS, extra_commands
def print_commands(self):
"""Print out a help message listing all available commands with a
description of each. The list is divided into standard commands
(listed in packaging2.command.STANDARD_COMMANDS) and extra commands
(given in self.cmdclass and not standard commands). The
descriptions come from the command class attribute
'description'.
"""
std_commands, extra_commands = self._get_command_groups()
max_length = 0
for cmd in (std_commands + extra_commands):
if len(cmd) > max_length:
max_length = len(cmd)
self.print_command_list(std_commands,
"Standard commands",
max_length)
if extra_commands:
print()
self.print_command_list(extra_commands,
"Extra commands",
max_length)
# -- Command class/object methods ----------------------------------
def get_command_obj(self, command, create=True):
"""Return the command object for 'command'. Normally this object
is cached on a previous call to 'get_command_obj()'; if no command
object for 'command' is in the cache, then we either create and
return it (if 'create' is true) or return None.
"""
cmd_obj = self.command_obj.get(command)
if not cmd_obj and create:
logger.debug("Distribution.get_command_obj(): "
"creating %r command object", command)
cls = get_command_class(command)
cmd_obj = self.command_obj[command] = cls(self)
self.have_run[command] = 0
# Set any options that were supplied in config files or on the
# command line. (XXX support for error reporting is suboptimal
# here: errors aren't reported until finalize_options is called,
# which means we won't report the source of the error.)
options = self.command_options.get(command)
if options:
self._set_command_options(cmd_obj, options)
return cmd_obj
def _set_command_options(self, command_obj, option_dict=None):
"""Set the options for 'command_obj' from 'option_dict'. Basically
this means copying elements of a dictionary ('option_dict') to
attributes of an instance ('command').
'command_obj' must be a Command instance. If 'option_dict' is not
supplied, uses the standard option dictionary for this command
(from 'self.command_options').
"""
command_name = command_obj.get_command_name()
if option_dict is None:
option_dict = self.get_option_dict(command_name)
logger.debug(" setting options for %r command:", command_name)
for option, (source, value) in option_dict.items():
logger.debug(" %s = %s (from %s)", option, value, source)
try:
bool_opts = [x.replace('-', '_')
for x in command_obj.boolean_options]
except AttributeError:
bool_opts = []
try:
neg_opt = command_obj.negative_opt
except AttributeError:
neg_opt = {}
try:
is_string = isinstance(value, str)
if option in neg_opt and is_string:
setattr(command_obj, neg_opt[option], not strtobool(value))
elif option in bool_opts and is_string:
setattr(command_obj, option, strtobool(value))
elif hasattr(command_obj, option):
setattr(command_obj, option, value)
else:
raise PackagingOptionError(
"error in %s: command %r has no such option %r" %
(source, command_name, option))
except ValueError as msg:
raise PackagingOptionError(msg)
def get_reinitialized_command(self, command, reinit_subcommands=False):
"""Reinitializes a command to the state it was in when first
returned by 'get_command_obj()': ie., initialized but not yet
finalized. This provides the opportunity to sneak option
values in programmatically, overriding or supplementing
user-supplied values from the config files and command line.
You'll have to re-finalize the command object (by calling
'finalize_options()' or 'ensure_finalized()') before using it for
real.
'command' should be a command name (string) or command object. If
'reinit_subcommands' is true, also reinitializes the command's
sub-commands, as declared by the 'sub_commands' class attribute (if
it has one). See the "install_dist" command for an example. Only
reinitializes the sub-commands that actually matter, ie. those
whose test predicates return true.
Returns the reinitialized command object.
"""
if not isinstance(command, Command):
command_name = command
command = self.get_command_obj(command_name)
else:
command_name = command.get_command_name()
if not command.finalized:
return command
command.initialize_options()
self.have_run[command_name] = 0
command.finalized = False
self._set_command_options(command)
if reinit_subcommands:
for sub in command.get_sub_commands():
self.get_reinitialized_command(sub, reinit_subcommands)
return command
# -- Methods that operate on the Distribution ----------------------
def run_commands(self):
"""Run each command that was seen on the setup script command line.
Uses the list of commands found and cache of command objects
created by 'get_command_obj()'.
"""
for cmd in self.commands:
self.run_command(cmd)
# -- Methods that operate on its Commands --------------------------
def run_command(self, command, options=None):
"""Do whatever it takes to run a command (including nothing at all,
if the command has already been run). Specifically: if we have
already created and run the command named by 'command', return
silently without doing anything. If the command named by 'command'
doesn't even have a command object yet, create one. Then invoke
'run()' on that command object (or an existing one).
"""
# Already been here, done that? then return silently.
if self.have_run.get(command):
return
if options is not None:
self.command_options[command] = options
cmd_obj = self.get_command_obj(command)
cmd_obj.ensure_finalized()
self.run_command_hooks(cmd_obj, 'pre_hook')
logger.info("running %s", command)
cmd_obj.run()
self.run_command_hooks(cmd_obj, 'post_hook')
self.have_run[command] = 1
def run_command_hooks(self, cmd_obj, hook_kind):
"""Run hooks registered for that command and phase.
*cmd_obj* is a finalized command object; *hook_kind* is either
'pre_hook' or 'post_hook'.
"""
if hook_kind not in ('pre_hook', 'post_hook'):
raise ValueError('invalid hook kind: %r' % hook_kind)
hooks = getattr(cmd_obj, hook_kind, None)
if hooks is None:
return
for hook in hooks.values():
if isinstance(hook, str):
try:
hook_obj = resolve_name(hook)
except ImportError as e:
raise PackagingModuleError(e)
else:
hook_obj = hook
if not hasattr(hook_obj, '__call__'):
raise PackagingOptionError('hook %r is not callable' % hook)
logger.info('running %s %s for command %s',
hook_kind, hook, cmd_obj.get_command_name())
hook_obj(cmd_obj)
# -- Distribution query methods ------------------------------------
def has_pure_modules(self):
return len(self.packages or self.py_modules or []) > 0
def has_ext_modules(self):
return self.ext_modules and len(self.ext_modules) > 0
def has_c_libraries(self):
return self.libraries and len(self.libraries) > 0
def has_modules(self):
return self.has_pure_modules() or self.has_ext_modules()
def has_headers(self):
return self.headers and len(self.headers) > 0
def has_scripts(self):
return self.scripts and len(self.scripts) > 0
def has_data_files(self):
return self.data_files and len(self.data_files) > 0
def is_pure(self):
return (self.has_pure_modules() and
not self.has_ext_modules() and
not self.has_c_libraries())