Mirror
/
cpython
mirror of https://github.com/python/cpython
4
1
Fork 0
Code Issues Releases Wiki Activity
cpython/Doc/c-api/init.rst

1020 lines
43 KiB
ReStructuredText
Raw Blame History

.. highlightlang:: c
.. _initialization:
*****************************************
Initialization, Finalization, and Threads
*****************************************
.. cfunction:: void Py_Initialize()
.. index::
single: Py_SetProgramName()
single: PyEval_InitThreads()
single: PyEval_ReleaseLock()
single: PyEval_AcquireLock()
single: modules (in module sys)
single: path (in module sys)
module: builtins
module: __main__
module: sys
triple: module; search; path
single: PySys_SetArgv()
single: Py_Finalize()
Initialize the Python interpreter. In an application embedding Python, this
should be called before using any other Python/C API functions; with the
exception of :cfunc:`Py_SetProgramName`, :cfunc:`PyEval_InitThreads`,
:cfunc:`PyEval_ReleaseLock`, and :cfunc:`PyEval_AcquireLock`. This initializes
the table of loaded modules (``sys.modules``), and creates the fundamental
modules :mod:`builtins`, :mod:`__main__` and :mod:`sys`. It also initializes
the module search path (``sys.path``). It does not set ``sys.argv``; use
:cfunc:`PySys_SetArgv` for that. This is a no-op when called for a second time
(without calling :cfunc:`Py_Finalize` first). There is no return value; it is a
fatal error if the initialization fails.
.. cfunction:: void Py_InitializeEx(int initsigs)
This function works like :cfunc:`Py_Initialize` if *initsigs* is 1. If
*initsigs* is 0, it skips initialization registration of signal handlers, which
might be useful when Python is embedded.
.. cfunction:: int Py_IsInitialized()
Return true (nonzero) when the Python interpreter has been initialized, false
(zero) if not. After :cfunc:`Py_Finalize` is called, this returns false until
:cfunc:`Py_Initialize` is called again.
.. cfunction:: void Py_Finalize()
Undo all initializations made by :cfunc:`Py_Initialize` and subsequent use of
Python/C API functions, and destroy all sub-interpreters (see
:cfunc:`Py_NewInterpreter` below) that were created and not yet destroyed since
the last call to :cfunc:`Py_Initialize`. Ideally, this frees all memory
allocated by the Python interpreter. This is a no-op when called for a second
time (without calling :cfunc:`Py_Initialize` again first). There is no return
value; errors during finalization are ignored.
This function is provided for a number of reasons. An embedding application
might want to restart Python without having to restart the application itself.
An application that has loaded the Python interpreter from a dynamically
loadable library (or DLL) might want to free all memory allocated by Python
before unloading the DLL. During a hunt for memory leaks in an application a
developer might want to free all memory allocated by Python before exiting from
the application.
**Bugs and caveats:** The destruction of modules and objects in modules is done
in random order; this may cause destructors (:meth:`__del__` methods) to fail
when they depend on other objects (even functions) or modules. Dynamically
loaded extension modules loaded by Python are not unloaded. Small amounts of
memory allocated by the Python interpreter may not be freed (if you find a leak,
please report it). Memory tied up in circular references between objects is not
freed. Some memory allocated by extension modules may not be freed. Some
extensions may not work properly if their initialization routine is called more
than once; this can happen if an application calls :cfunc:`Py_Initialize` and
:cfunc:`Py_Finalize` more than once.
.. cfunction:: PyThreadState* Py_NewInterpreter()
.. index::
module: builtins
module: __main__
module: sys
single: stdout (in module sys)
single: stderr (in module sys)
single: stdin (in module sys)
Create a new sub-interpreter. This is an (almost) totally separate environment
for the execution of Python code. In particular, the new interpreter has
separate, independent versions of all imported modules, including the
fundamental modules :mod:`builtins`, :mod:`__main__` and :mod:`sys`. The
table of loaded modules (``sys.modules``) and the module search path
(``sys.path``) are also separate. The new environment has no ``sys.argv``
variable. It has new standard I/O stream file objects ``sys.stdin``,
``sys.stdout`` and ``sys.stderr`` (however these refer to the same underlying
:ctype:`FILE` structures in the C library).
The return value points to the first thread state created in the new
sub-interpreter. This thread state is made in the current thread state.
Note that no actual thread is created; see the discussion of thread states
below. If creation of the new interpreter is unsuccessful, *NULL* is
returned; no exception is set since the exception state is stored in the
current thread state and there may not be a current thread state. (Like all
other Python/C API functions, the global interpreter lock must be held before
calling this function and is still held when it returns; however, unlike most
other Python/C API functions, there needn't be a current thread state on
entry.)
.. index::
single: Py_Finalize()
single: Py_Initialize()
Extension modules are shared between (sub-)interpreters as follows: the first
time a particular extension is imported, it is initialized normally, and a
(shallow) copy of its module's dictionary is squirreled away. When the same
extension is imported by another (sub-)interpreter, a new module is initialized
and filled with the contents of this copy; the extension's ``init`` function is
not called. Note that this is different from what happens when an extension is
imported after the interpreter has been completely re-initialized by calling
:cfunc:`Py_Finalize` and :cfunc:`Py_Initialize`; in that case, the extension's
``initmodule`` function *is* called again.
.. index:: single: close() (in module os)
**Bugs and caveats:** Because sub-interpreters (and the main interpreter) are
part of the same process, the insulation between them isn't perfect --- for
example, using low-level file operations like :func:`os.close` they can
(accidentally or maliciously) affect each other's open files. Because of the
way extensions are shared between (sub-)interpreters, some extensions may not
work properly; this is especially likely when the extension makes use of
(static) global variables, or when the extension manipulates its module's
dictionary after its initialization. It is possible to insert objects created
in one sub-interpreter into a namespace of another sub-interpreter; this should
be done with great care to avoid sharing user-defined functions, methods,
instances or classes between sub-interpreters, since import operations executed
by such objects may affect the wrong (sub-)interpreter's dictionary of loaded
modules. (XXX This is a hard-to-fix bug that will be addressed in a future
release.)
Also note that the use of this functionality is incompatible with extension
modules such as PyObjC and ctypes that use the :cfunc:`PyGILState_\*` APIs (and
this is inherent in the way the :cfunc:`PyGILState_\*` functions work). Simple
things may work, but confusing behavior will always be near.
.. cfunction:: void Py_EndInterpreter(PyThreadState *tstate)
.. index:: single: Py_Finalize()
Destroy the (sub-)interpreter represented by the given thread state. The given
thread state must be the current thread state. See the discussion of thread
states below. When the call returns, the current thread state is *NULL*. All
thread states associated with this interpreter are destroyed. (The global
interpreter lock must be held before calling this function and is still held
when it returns.) :cfunc:`Py_Finalize` will destroy all sub-interpreters that
haven't been explicitly destroyed at that point.
.. cfunction:: void Py_SetProgramName(wchar_t *name)
.. index::
single: Py_Initialize()
single: main()
single: Py_GetPath()
This function should be called before :cfunc:`Py_Initialize` is called for
the first time, if it is called at all. It tells the interpreter the value
of the ``argv[0]`` argument to the :cfunc:`main` function of the program
(converted to wide characters).
This is used by :cfunc:`Py_GetPath` and some other functions below to find
the Python run-time libraries relative to the interpreter executable. The
default value is ``'python'``. The argument should point to a
zero-terminated wide character string in static storage whose contents will not
change for the duration of the program's execution. No code in the Python
interpreter will change the contents of this storage.
.. cfunction:: wchar* Py_GetProgramName()
.. index:: single: Py_SetProgramName()
Return the program name set with :cfunc:`Py_SetProgramName`, or the default.
The returned string points into static storage; the caller should not modify its
value.
.. cfunction:: wchar_t* Py_GetPrefix()
Return the *prefix* for installed platform-independent files. This is derived
through a number of complicated rules from the program name set with
:cfunc:`Py_SetProgramName` and some environment variables; for example, if the
program name is ``'/usr/local/bin/python'``, the prefix is ``'/usr/local'``. The
returned string points into static storage; the caller should not modify its
value. This corresponds to the :makevar:`prefix` variable in the top-level
:file:`Makefile` and the :option:`--prefix` argument to the :program:`configure`
script at build time. The value is available to Python code as ``sys.prefix``.
It is only useful on Unix. See also the next function.
.. cfunction:: wchar_t* Py_GetExecPrefix()
Return the *exec-prefix* for installed platform-*dependent* files. This is
derived through a number of complicated rules from the program name set with
:cfunc:`Py_SetProgramName` and some environment variables; for example, if the
program name is ``'/usr/local/bin/python'``, the exec-prefix is
``'/usr/local'``. The returned string points into static storage; the caller
should not modify its value. This corresponds to the :makevar:`exec_prefix`
variable in the top-level :file:`Makefile` and the :option:`--exec-prefix`
argument to the :program:`configure` script at build time. The value is
available to Python code as ``sys.exec_prefix``. It is only useful on Unix.
Background: The exec-prefix differs from the prefix when platform dependent
files (such as executables and shared libraries) are installed in a different
directory tree. In a typical installation, platform dependent files may be
installed in the :file:`/usr/local/plat` subtree while platform independent may
be installed in :file:`/usr/local`.
Generally speaking, a platform is a combination of hardware and software
families, e.g. Sparc machines running the Solaris 2.x operating system are
considered the same platform, but Intel machines running Solaris 2.x are another
platform, and Intel machines running Linux are yet another platform. Different
major revisions of the same operating system generally also form different
platforms. Non-Unix operating systems are a different story; the installation
strategies on those systems are so different that the prefix and exec-prefix are
meaningless, and set to the empty string. Note that compiled Python bytecode
files are platform independent (but not independent from the Python version by
which they were compiled!).
System administrators will know how to configure the :program:`mount` or
:program:`automount` programs to share :file:`/usr/local` between platforms
while having :file:`/usr/local/plat` be a different filesystem for each
platform.
.. cfunction:: wchar_t* Py_GetProgramFullPath()
.. index::
single: Py_SetProgramName()
single: executable (in module sys)
Return the full program name of the Python executable; this is computed as a
side-effect of deriving the default module search path from the program name
(set by :cfunc:`Py_SetProgramName` above). The returned string points into
static storage; the caller should not modify its value. The value is available
to Python code as ``sys.executable``.
.. cfunction:: wchar_t* Py_GetPath()
.. index::
triple: module; search; path
single: path (in module sys)
Return the default module search path; this is computed from the program name
(set by :cfunc:`Py_SetProgramName` above) and some environment variables. The
returned string consists of a series of directory names separated by a platform
dependent delimiter character. The delimiter character is ``':'`` on Unix and
Mac OS X, ``';'`` on Windows. The returned string points into static storage;
the caller should not modify its value. The value is available to Python code
as the list ``sys.path``, which may be modified to change the future search path
for loaded modules.
.. XXX should give the exact rules
.. cfunction:: const char* Py_GetVersion()
Return the version of this Python interpreter. This is a string that looks
something like ::
"3.0a5+ (py3k:63103M, May 12 2008, 00:53:55) \n[GCC 4.2.3]"
.. index:: single: version (in module sys)
The first word (up to the first space character) is the current Python version;
the first three characters are the major and minor version separated by a
period. The returned string points into static storage; the caller should not
modify its value. The value is available to Python code as :data:`sys.version`.
.. cfunction:: const char* Py_GetBuildNumber()
Return a string representing the Subversion revision that this Python executable
was built from. This number is a string because it may contain a trailing 'M'
if Python was built from a mixed revision source tree.
.. cfunction:: const char* Py_GetPlatform()
.. index:: single: platform (in module sys)
Return the platform identifier for the current platform. On Unix, this is
formed from the "official" name of the operating system, converted to lower
case, followed by the major revision number; e.g., for Solaris 2.x, which is
also known as SunOS 5.x, the value is ``'sunos5'``. On Mac OS X, it is
``'darwin'``. On Windows, it is ``'win'``. The returned string points into
static storage; the caller should not modify its value. The value is available
to Python code as ``sys.platform``.
.. cfunction:: const char* Py_GetCopyright()
Return the official copyright string for the current Python version, for example
``'Copyright 1991-1995 Stichting Mathematisch Centrum, Amsterdam'``
.. index:: single: copyright (in module sys)
The returned string points into static storage; the caller should not modify its
value. The value is available to Python code as ``sys.copyright``.
.. cfunction:: const char* Py_GetCompiler()
Return an indication of the compiler used to build the current Python version,
in square brackets, for example::
"[GCC 2.7.2.2]"
.. index:: single: version (in module sys)
The returned string points into static storage; the caller should not modify its
value. The value is available to Python code as part of the variable
``sys.version``.
.. cfunction:: const char* Py_GetBuildInfo()
Return information about the sequence number and build date and time of the
current Python interpreter instance, for example ::
"#67, Aug 1 1997, 22:34:28"
.. index:: single: version (in module sys)
The returned string points into static storage; the caller should not modify its
value. The value is available to Python code as part of the variable
``sys.version``.
.. cfunction:: void PySys_SetArgv(int argc, wchar_t **argv)
.. index::
single: main()
single: Py_FatalError()
single: argv (in module sys)
Set :data:`sys.argv` based on *argc* and *argv*. These parameters are
similar to those passed to the program's :cfunc:`main` function with the
difference that the first entry should refer to the script file to be
executed rather than the executable hosting the Python interpreter. If there
isn't a script that will be run, the first entry in *argv* can be an empty
string. If this function fails to initialize :data:`sys.argv`, a fatal
condition is signalled using :cfunc:`Py_FatalError`.
This function also prepends the executed script's path to :data:`sys.path`.
If no script is executed (in the case of calling ``python -c`` or just the
interactive interpreter), the empty string is used instead.
.. XXX impl. doesn't seem consistent in allowing 0/NULL for the params;
check w/ Guido.
.. cfunction:: void Py_SetPythonHome(char *home)
Set the default "home" directory, that is, the location of the standard
Python libraries. The libraries are searched in
:file:`{home}/lib/python{version}` and :file:`{home}/lib/python{version}`.
.. cfunction:: char* Py_GetPythonHome()
Return the default "home", that is, the value set by a previous call to
:cfunc:`Py_SetPythonHome`, or the value of the :envvar:`PYTHONHOME`
environment variable if it is set.
.. _threads:
Thread State and the Global Interpreter Lock
============================================
.. index::
single: global interpreter lock
single: interpreter lock
single: lock, interpreter
The Python interpreter is not fully thread safe. In order to support
multi-threaded Python programs, there's a global lock that must be held by the
current thread before it can safely access Python objects. Without the lock,
even the simplest operations could cause problems in a multi-threaded program:
for example, when two threads simultaneously increment the reference count of
the same object, the reference count could end up being incremented only once
instead of twice.
.. index:: single: setcheckinterval() (in module sys)
Therefore, the rule exists that only the thread that has acquired the global
interpreter lock may operate on Python objects or call Python/C API functions.
In order to support multi-threaded Python programs, the interpreter regularly
releases and reacquires the lock --- by default, every 100 bytecode instructions
(this can be changed with :func:`sys.setcheckinterval`). The lock is also
released and reacquired around potentially blocking I/O operations like reading
or writing a file, so that other threads can run while the thread that requests
the I/O is waiting for the I/O operation to complete.
.. index::
single: PyThreadState
single: PyThreadState
The Python interpreter needs to keep some bookkeeping information separate per
thread --- for this it uses a data structure called :ctype:`PyThreadState`.
There's one global variable, however: the pointer to the current
:ctype:`PyThreadState` structure. While most thread packages have a way to
store "per-thread global data," Python's internal platform independent thread
abstraction doesn't support this yet. Therefore, the current thread state must
be manipulated explicitly.
This is easy enough in most cases. Most code manipulating the global
interpreter lock has the following simple structure::
Save the thread state in a local variable.
Release the interpreter lock.
...Do some blocking I/O operation...
Reacquire the interpreter lock.
Restore the thread state from the local variable.
This is so common that a pair of macros exists to simplify it::
Py_BEGIN_ALLOW_THREADS
...Do some blocking I/O operation...
Py_END_ALLOW_THREADS
.. index::
single: Py_BEGIN_ALLOW_THREADS
single: Py_END_ALLOW_THREADS
The :cmacro:`Py_BEGIN_ALLOW_THREADS` macro opens a new block and declares a
hidden local variable; the :cmacro:`Py_END_ALLOW_THREADS` macro closes the
block. Another advantage of using these two macros is that when Python is
compiled without thread support, they are defined empty, thus saving the thread
state and lock manipulations.
When thread support is enabled, the block above expands to the following code::
PyThreadState *_save;
_save = PyEval_SaveThread();
...Do some blocking I/O operation...
PyEval_RestoreThread(_save);
Using even lower level primitives, we can get roughly the same effect as
follows::
PyThreadState *_save;
_save = PyThreadState_Swap(NULL);
PyEval_ReleaseLock();
...Do some blocking I/O operation...
PyEval_AcquireLock();
PyThreadState_Swap(_save);
.. index::
single: PyEval_RestoreThread()
single: errno
single: PyEval_SaveThread()
single: PyEval_ReleaseLock()
single: PyEval_AcquireLock()
There are some subtle differences; in particular, :cfunc:`PyEval_RestoreThread`
saves and restores the value of the global variable :cdata:`errno`, since the
lock manipulation does not guarantee that :cdata:`errno` is left alone. Also,
when thread support is disabled, :cfunc:`PyEval_SaveThread` and
:cfunc:`PyEval_RestoreThread` don't manipulate the lock; in this case,
:cfunc:`PyEval_ReleaseLock` and :cfunc:`PyEval_AcquireLock` are not available.
This is done so that dynamically loaded extensions compiled with thread support
enabled can be loaded by an interpreter that was compiled with disabled thread
support.
The global interpreter lock is used to protect the pointer to the current thread
state. When releasing the lock and saving the thread state, the current thread
state pointer must be retrieved before the lock is released (since another
thread could immediately acquire the lock and store its own thread state in the
global variable). Conversely, when acquiring the lock and restoring the thread
state, the lock must be acquired before storing the thread state pointer.
Why am I going on with so much detail about this? Because when threads are
created from C, they don't have the global interpreter lock, nor is there a
thread state data structure for them. Such threads must bootstrap themselves
into existence, by first creating a thread state data structure, then acquiring
the lock, and finally storing their thread state pointer, before they can start
using the Python/C API. When they are done, they should reset the thread state
pointer, release the lock, and finally free their thread state data structure.
Threads can take advantage of the :cfunc:`PyGILState_\*` functions to do all of
the above automatically. The typical idiom for calling into Python from a C
thread is now::
PyGILState_STATE gstate;
gstate = PyGILState_Ensure();
/* Perform Python actions here. */
result = CallSomeFunction();
/* evaluate result */
/* Release the thread. No Python API allowed beyond this point. */
PyGILState_Release(gstate);
Note that the :cfunc:`PyGILState_\*` functions assume there is only one global
interpreter (created automatically by :cfunc:`Py_Initialize`). Python still
supports the creation of additional interpreters (using
:cfunc:`Py_NewInterpreter`), but mixing multiple interpreters and the
:cfunc:`PyGILState_\*` API is unsupported.
.. ctype:: PyInterpreterState
This data structure represents the state shared by a number of cooperating
threads. Threads belonging to the same interpreter share their module
administration and a few other internal items. There are no public members in
this structure.
Threads belonging to different interpreters initially share nothing, except
process state like available memory, open file descriptors and such. The global
interpreter lock is also shared by all threads, regardless of to which
interpreter they belong.
.. ctype:: PyThreadState
This data structure represents the state of a single thread. The only public
data member is :ctype:`PyInterpreterState \*`:attr:`interp`, which points to
this thread's interpreter state.
.. cfunction:: void PyEval_InitThreads()
.. index::
single: PyEval_ReleaseLock()
single: PyEval_ReleaseThread()
single: PyEval_SaveThread()
single: PyEval_RestoreThread()
Initialize and acquire the global interpreter lock. It should be called in the
main thread before creating a second thread or engaging in any other thread
operations such as :cfunc:`PyEval_ReleaseLock` or
``PyEval_ReleaseThread(tstate)``. It is not needed before calling
:cfunc:`PyEval_SaveThread` or :cfunc:`PyEval_RestoreThread`.
.. index:: single: Py_Initialize()
This is a no-op when called for a second time. It is safe to call this function
before calling :cfunc:`Py_Initialize`.
.. index:: module: _thread
When only the main thread exists, no lock operations are needed. This is a
common situation (most Python programs do not use threads), and the lock
operations slow the interpreter down a bit. Therefore, the lock is not created
initially. This situation is equivalent to having acquired the lock: when
there is only a single thread, all object accesses are safe. Therefore, when
this function initializes the lock, it also acquires it. Before the Python
:mod:`_thread` module creates a new thread, knowing that either it has the lock
or the lock hasn't been created yet, it calls :cfunc:`PyEval_InitThreads`. When
this call returns, it is guaranteed that the lock has been created and that the
calling thread has acquired it.
It is **not** safe to call this function when it is unknown which thread (if
any) currently has the global interpreter lock.
This function is not available when thread support is disabled at compile time.
.. cfunction:: int PyEval_ThreadsInitialized()
Returns a non-zero value if :cfunc:`PyEval_InitThreads` has been called. This
function can be called without holding the lock, and therefore can be used to
avoid calls to the locking API when running single-threaded. This function is
not available when thread support is disabled at compile time.
.. cfunction:: void PyEval_AcquireLock()
Acquire the global interpreter lock. The lock must have been created earlier.
If this thread already has the lock, a deadlock ensues. This function is not
available when thread support is disabled at compile time.
.. cfunction:: void PyEval_ReleaseLock()
Release the global interpreter lock. The lock must have been created earlier.
This function is not available when thread support is disabled at compile time.
.. cfunction:: void PyEval_AcquireThread(PyThreadState *tstate)
Acquire the global interpreter lock and set the current thread state to
*tstate*, which should not be *NULL*. The lock must have been created earlier.
If this thread already has the lock, deadlock ensues. This function is not
available when thread support is disabled at compile time.
.. cfunction:: void PyEval_ReleaseThread(PyThreadState *tstate)
Reset the current thread state to *NULL* and release the global interpreter
lock. The lock must have been created earlier and must be held by the current
thread. The *tstate* argument, which must not be *NULL*, is only used to check
that it represents the current thread state --- if it isn't, a fatal error is
reported. This function is not available when thread support is disabled at
compile time.
.. cfunction:: PyThreadState* PyEval_SaveThread()
Release the interpreter lock (if it has been created and thread support is
enabled) and reset the thread state to *NULL*, returning the previous thread
state (which is not *NULL*). If the lock has been created, the current thread
must have acquired it. (This function is available even when thread support is
disabled at compile time.)
.. cfunction:: void PyEval_RestoreThread(PyThreadState *tstate)
Acquire the interpreter lock (if it has been created and thread support is
enabled) and set the thread state to *tstate*, which must not be *NULL*. If the
lock has been created, the current thread must not have acquired it, otherwise
deadlock ensues. (This function is available even when thread support is
disabled at compile time.)
.. cfunction:: void PyEval_ReInitThreads()
This function is called from :cfunc:`PyOS_AfterFork` to ensure that newly
created child processes don't hold locks referring to threads which
are not running in the child process.
The following macros are normally used without a trailing semicolon; look for
example usage in the Python source distribution.
.. cmacro:: Py_BEGIN_ALLOW_THREADS
This macro expands to ``{ PyThreadState *_save; _save = PyEval_SaveThread();``.
Note that it contains an opening brace; it must be matched with a following
:cmacro:`Py_END_ALLOW_THREADS` macro. See above for further discussion of this
macro. It is a no-op when thread support is disabled at compile time.
.. cmacro:: Py_END_ALLOW_THREADS
This macro expands to ``PyEval_RestoreThread(_save); }``. Note that it contains
a closing brace; it must be matched with an earlier
:cmacro:`Py_BEGIN_ALLOW_THREADS` macro. See above for further discussion of
this macro. It is a no-op when thread support is disabled at compile time.
.. cmacro:: Py_BLOCK_THREADS
This macro expands to ``PyEval_RestoreThread(_save);``: it is equivalent to
:cmacro:`Py_END_ALLOW_THREADS` without the closing brace. It is a no-op when
thread support is disabled at compile time.
.. cmacro:: Py_UNBLOCK_THREADS
This macro expands to ``_save = PyEval_SaveThread();``: it is equivalent to
:cmacro:`Py_BEGIN_ALLOW_THREADS` without the opening brace and variable
declaration. It is a no-op when thread support is disabled at compile time.
All of the following functions are only available when thread support is enabled
at compile time, and must be called only when the interpreter lock has been
created.
.. cfunction:: PyInterpreterState* PyInterpreterState_New()
Create a new interpreter state object. The interpreter lock need not be held,
but may be held if it is necessary to serialize calls to this function.
.. cfunction:: void PyInterpreterState_Clear(PyInterpreterState *interp)
Reset all information in an interpreter state object. The interpreter lock must
be held.
.. cfunction:: void PyInterpreterState_Delete(PyInterpreterState *interp)
Destroy an interpreter state object. The interpreter lock need not be held.
The interpreter state must have been reset with a previous call to
:cfunc:`PyInterpreterState_Clear`.
.. cfunction:: PyThreadState* PyThreadState_New(PyInterpreterState *interp)
Create a new thread state object belonging to the given interpreter object. The
interpreter lock need not be held, but may be held if it is necessary to
serialize calls to this function.
.. cfunction:: void PyThreadState_Clear(PyThreadState *tstate)
Reset all information in a thread state object. The interpreter lock must be
held.
.. cfunction:: void PyThreadState_Delete(PyThreadState *tstate)
Destroy a thread state object. The interpreter lock need not be held. The
thread state must have been reset with a previous call to
:cfunc:`PyThreadState_Clear`.
.. cfunction:: PyThreadState* PyThreadState_Get()
Return the current thread state. The interpreter lock must be held. When the
current thread state is *NULL*, this issues a fatal error (so that the caller
needn't check for *NULL*).
.. cfunction:: PyThreadState* PyThreadState_Swap(PyThreadState *tstate)
Swap the current thread state with the thread state given by the argument
*tstate*, which may be *NULL*. The interpreter lock must be held.
.. cfunction:: PyObject* PyThreadState_GetDict()
Return a dictionary in which extensions can store thread-specific state
information. Each extension should use a unique key to use to store state in
the dictionary. It is okay to call this function when no current thread state
is available. If this function returns *NULL*, no exception has been raised and
the caller should assume no current thread state is available.
.. cfunction:: int PyThreadState_SetAsyncExc(long id, PyObject *exc)
Asynchronously raise an exception in a thread. The *id* argument is the thread
id of the target thread; *exc* is the exception object to be raised. This
function does not steal any references to *exc*. To prevent naive misuse, you
must write your own C extension to call this. Must be called with the GIL held.
Returns the number of thread states modified; this is normally one, but will be
zero if the thread id isn't found. If *exc* is :const:`NULL`, the pending
exception (if any) for the thread is cleared. This raises no exceptions.
.. cfunction:: PyGILState_STATE PyGILState_Ensure()
Ensure that the current thread is ready to call the Python C API regardless of
the current state of Python, or of its thread lock. This may be called as many
times as desired by a thread as long as each call is matched with a call to
:cfunc:`PyGILState_Release`. In general, other thread-related APIs may be used
between :cfunc:`PyGILState_Ensure` and :cfunc:`PyGILState_Release` calls as long
as the thread state is restored to its previous state before the Release(). For
example, normal usage of the :cmacro:`Py_BEGIN_ALLOW_THREADS` and
:cmacro:`Py_END_ALLOW_THREADS` macros is acceptable.
The return value is an opaque "handle" to the thread state when
:cfunc:`PyGILState_Ensure` was called, and must be passed to
:cfunc:`PyGILState_Release` to ensure Python is left in the same state. Even
though recursive calls are allowed, these handles *cannot* be shared - each
unique call to :cfunc:`PyGILState_Ensure` must save the handle for its call
to :cfunc:`PyGILState_Release`.
When the function returns, the current thread will hold the GIL. Failure is a
fatal error.
.. cfunction:: void PyGILState_Release(PyGILState_STATE)
Release any resources previously acquired. After this call, Python's state will
be the same as it was prior to the corresponding :cfunc:`PyGILState_Ensure` call
(but generally this state will be unknown to the caller, hence the use of the
GILState API.)
Every call to :cfunc:`PyGILState_Ensure` must be matched by a call to
:cfunc:`PyGILState_Release` on the same thread.
Asynchronous Notifications
==========================
A mechanism is provided to make asynchronous notifications to the main
interpreter thread. These notifications take the form of a function
pointer and a void argument.
.. index:: single: setcheckinterval() (in module sys)
Every check interval, when the interpreter lock is released and reacquired,
python will also call any such provided functions. This can be used for
example by asynchronous IO handlers. The notification can be scheduled
from a worker thread and the actual call than made at the earliest
convenience by the main thread where it has possession of the global
interpreter lock and can perform any Python API calls.
.. cfunction:: void Py_AddPendingCall( int (*func)(void *, void *arg) )
.. index:: single: Py_AddPendingCall()
Post a notification to the Python main thread. If successful,
*func* will be called with the argument *arg* at the earliest
convenience. *func* will be called having the global interpreter
lock held and can thus use the full Python API and can take any
action such as setting object attributes to signal IO completion.
It must return 0 on success, or -1 signalling an exception.
The notification function won't be interrupted to perform another
asynchronous notification recursively,
but it can still be interrupted to switch threads if the interpreter
lock is released, for example, if it calls back into python code.
This function returns 0 on success in which case the notification has been
scheduled. Otherwise, for example if the notification buffer is full,
it returns -1 without setting any exception.
This function can be called on any thread, be it a Python thread or
some other system thread. If it is a Python thread, it doesn't matter if
it holds the global interpreter lock or not.
.. versionadded:: 2.7
.. _profiling:
Profiling and Tracing
=====================
.. sectionauthor:: Fred L. Drake, Jr. <fdrake@acm.org>
The Python interpreter provides some low-level support for attaching profiling
and execution tracing facilities. These are used for profiling, debugging, and
coverage analysis tools.
This C interface allows the profiling or tracing code to avoid the overhead of
calling through Python-level callable objects, making a direct C function call
instead. The essential attributes of the facility have not changed; the
interface allows trace functions to be installed per-thread, and the basic
events reported to the trace function are the same as had been reported to the
Python-level trace functions in previous versions.
.. ctype:: int (*Py_tracefunc)(PyObject *obj, PyFrameObject *frame, int what, PyObject *arg)
The type of the trace function registered using :cfunc:`PyEval_SetProfile` and
:cfunc:`PyEval_SetTrace`. The first parameter is the object passed to the
registration function as *obj*, *frame* is the frame object to which the event
pertains, *what* is one of the constants :const:`PyTrace_CALL`,
:const:`PyTrace_EXCEPTION`, :const:`PyTrace_LINE`, :const:`PyTrace_RETURN`,
:const:`PyTrace_C_CALL`, :const:`PyTrace_C_EXCEPTION`, or
:const:`PyTrace_C_RETURN`, and *arg* depends on the value of *what*:
+------------------------------+--------------------------------------+
| Value of *what* | Meaning of *arg* |
+==============================+======================================+
| :const:`PyTrace_CALL` | Always *NULL*. |
+------------------------------+--------------------------------------+
| :const:`PyTrace_EXCEPTION` | Exception information as returned by |
| | :func:`sys.exc_info`. |
+------------------------------+--------------------------------------+
| :const:`PyTrace_LINE` | Always *NULL*. |
+------------------------------+--------------------------------------+
| :const:`PyTrace_RETURN` | Value being returned to the caller. |
+------------------------------+--------------------------------------+
| :const:`PyTrace_C_CALL` | Name of function being called. |
+------------------------------+--------------------------------------+
| :const:`PyTrace_C_EXCEPTION` | Always *NULL*. |
+------------------------------+--------------------------------------+
| :const:`PyTrace_C_RETURN` | Always *NULL*. |
+------------------------------+--------------------------------------+
.. cvar:: int PyTrace_CALL
The value of the *what* parameter to a :ctype:`Py_tracefunc` function when a new
call to a function or method is being reported, or a new entry into a generator.
Note that the creation of the iterator for a generator function is not reported
as there is no control transfer to the Python bytecode in the corresponding
frame.
.. cvar:: int PyTrace_EXCEPTION
The value of the *what* parameter to a :ctype:`Py_tracefunc` function when an
exception has been raised. The callback function is called with this value for
*what* when after any bytecode is processed after which the exception becomes
set within the frame being executed. The effect of this is that as exception
propagation causes the Python stack to unwind, the callback is called upon
return to each frame as the exception propagates. Only trace functions receives
these events; they are not needed by the profiler.
.. cvar:: int PyTrace_LINE
The value passed as the *what* parameter to a trace function (but not a
profiling function) when a line-number event is being reported.
.. cvar:: int PyTrace_RETURN
The value for the *what* parameter to :ctype:`Py_tracefunc` functions when a
call is returning without propagating an exception.
.. cvar:: int PyTrace_C_CALL
The value for the *what* parameter to :ctype:`Py_tracefunc` functions when a C
function is about to be called.
.. cvar:: int PyTrace_C_EXCEPTION
The value for the *what* parameter to :ctype:`Py_tracefunc` functions when a C
function has thrown an exception.
.. cvar:: int PyTrace_C_RETURN
The value for the *what* parameter to :ctype:`Py_tracefunc` functions when a C
function has returned.
.. cfunction:: void PyEval_SetProfile(Py_tracefunc func, PyObject *obj)
Set the profiler function to *func*. The *obj* parameter is passed to the
function as its first parameter, and may be any Python object, or *NULL*. If
the profile function needs to maintain state, using a different value for *obj*
for each thread provides a convenient and thread-safe place to store it. The
profile function is called for all monitored events except the line-number
events.
.. cfunction:: void PyEval_SetTrace(Py_tracefunc func, PyObject *obj)
Set the tracing function to *func*. This is similar to
:cfunc:`PyEval_SetProfile`, except the tracing function does receive line-number
events.
.. cfunction:: PyObject* PyEval_GetCallStats(PyObject *self)
Return a tuple of function call counts. There are constants defined for the
positions within the tuple:
+-------------------------------+-------+
| Name | Value |
+===============================+=======+
| :const:`PCALL_ALL` | 0 |
+-------------------------------+-------+
| :const:`PCALL_FUNCTION` | 1 |
+-------------------------------+-------+
| :const:`PCALL_FAST_FUNCTION` | 2 |
+-------------------------------+-------+
| :const:`PCALL_FASTER_FUNCTION`| 3 |
+-------------------------------+-------+
| :const:`PCALL_METHOD` | 4 |
+-------------------------------+-------+
| :const:`PCALL_BOUND_METHOD` | 5 |
+-------------------------------+-------+
| :const:`PCALL_CFUNCTION` | 6 |
+-------------------------------+-------+
| :const:`PCALL_TYPE` | 7 |
+-------------------------------+-------+
| :const:`PCALL_GENERATOR` | 8 |
+-------------------------------+-------+
| :const:`PCALL_OTHER` | 9 |
+-------------------------------+-------+
| :const:`PCALL_POP` | 10 |
+-------------------------------+-------+
:const:`PCALL_FAST_FUNCTION` means no argument tuple needs to be created.
:const:`PCALL_FASTER_FUNCTION` means that the fast-path frame setup code is used.
If there is a method call where the call can be optimized by changing
the argument tuple and calling the function directly, it gets recorded
twice.
This function is only present if Python is compiled with :const:`CALL_PROFILE`
defined.
.. _advanced-debugging:
Advanced Debugger Support
=========================
.. sectionauthor:: Fred L. Drake, Jr. <fdrake@acm.org>
These functions are only intended to be used by advanced debugging tools.
.. cfunction:: PyInterpreterState* PyInterpreterState_Head()
Return the interpreter state object at the head of the list of all such objects.
.. cfunction:: PyInterpreterState* PyInterpreterState_Next(PyInterpreterState *interp)
Return the next interpreter state object after *interp* from the list of all
such objects.
.. cfunction:: PyThreadState * PyInterpreterState_ThreadHead(PyInterpreterState *interp)
Return the a pointer to the first :ctype:`PyThreadState` object in the list of
threads associated with the interpreter *interp*.
.. cfunction:: PyThreadState* PyThreadState_Next(PyThreadState *tstate)
Return the next thread state object after *tstate* from the list of all such
objects belonging to the same :ctype:`PyInterpreterState` object.
Reference in New Issue View Git Blame Copy Permalink