Py_FinalizeEx() now clears _PyRuntime.warnings variables and
_PyRuntime.exitfuncs.
Changes:
* Add _PyWarnings_Fini(): called by Py_FinalizeEx()
* call_ll_exitfuncs() now clears _PyRuntime.exitfuncs while iterating
on it (on backward order).
Fix invalid function cast warnings with gcc 8
for method conventions different from METH_NOARGS, METH_O and
METH_VARARGS excluding Argument Clinic generated code.
If Py_BUILD_CORE is defined, the PyThreadState_GET() macro access
_PyRuntime which comes from the internal pycore_state.h header.
Public headers must not require internal headers.
Move PyThreadState_GET() and _PyInterpreterState_GET_UNSAFE() from
Include/pystate.h to Include/internal/pycore_state.h, and rename
PyThreadState_GET() to _PyThreadState_GET() there.
The PyThreadState_GET() macro of pystate.h is now redefined when
pycore_state.h is included, to use the fast _PyThreadState_GET().
Changes:
* Add _PyThreadState_GET() macro
* Replace "PyThreadState_GET()->interp" with
_PyInterpreterState_GET_UNSAFE()
* Replace PyThreadState_GET() with _PyThreadState_GET() in internal C
files (compiled with Py_BUILD_CORE defined), but keep
PyThreadState_GET() in the public header files.
* _testcapimodule.c: replace PyThreadState_GET() with
PyThreadState_Get(); the module is not compiled with Py_BUILD_CORE
defined.
* pycore_state.h now requires Py_BUILD_CORE to be defined.
When an unawaited coroutine is collected very late in shutdown --
like, during the final GC at the end of PyImport_Cleanup -- then it
was triggering an interpreter abort, because we'd try to look up the
"warnings" module and not only was it missing (we were prepared for
that), but the entire module system was missing (which we were not
prepared for).
I've tried to fix this at the source, by making the utility function
get_warnings_attr robust against this in general. Note that it already
has the convention that it can return NULL without setting an error,
which is how it signals that the attribute it was asked to fetch is
missing, and that all callers already check for NULL returns.
There's a similar check for being late in shutdown at the top of
warn_explicit, which might be unnecessary after this fix, but I'm not
sure so I'm going to leave it.
The previous version was correct in terms of behaviour, but
checking the return value of PyErr_WarnFormat allows to
avoid calling PyErr_Occurred and silences the coverity alarm.
* Add coro.cr_origin and sys.set_coroutine_origin_tracking_depth
* Use coroutine origin information in the unawaited coroutine warning
* Stop using set_coroutine_wrapper in asyncio debug mode
* In BaseEventLoop.set_debug, enable debugging in the correct thread
- primary change is to add a new default filter entry for
'default::DeprecationWarning:__main__'
- secondary change is an internal one to cope with plain
strings in the warning module's internal filter list
(this avoids the need to create a compiled regex object
early on during interpreter startup)
- assorted documentation updates, including many more
examples of configuring the warnings settings
- additional tests to ensure that both the pure Python and
the C accelerated warnings modules have the expected
default configuration
Fix compiler warnings in Py_FinalizeEx(): only define variables if
they are needed, add #ifdef.
Other cleanup changes:
* _PyWarnings_InitWithConfig() is no more needed: call
_PyWarnings_Init() instead.
* Inline pymain_init_main_interpreter() in its caller. This
subfunction is no more justifed.
Rather than supporting dev mode directly in the warnings module, this
instead adjusts the initialisation code to add an extra 'default'
entry to sys.warnoptions when dev mode is enabled.
This ensures that dev mode behaves *exactly* as if `-Wdefault` had
been passed on the command line, including in the way it interacts
with `sys.warnoptions`, and with other command line flags like `-bb`.
Fix also bpo-20361: have -b & -bb options take precedence over any
other warnings options.
Patch written by Nick Coghlan, with minor modifications of Victor Stinner.
The warnings module doesn't leak memory anymore in the hidden
warnings registry for the "ignore" action of warnings filters.
The warn_explicit() function doesn't add the warning key to the
registry anymore for the "ignore" action.
create_filter() now expects the action as a _Py_Identifier which
avoids string comparison, and more important, to avoid handling the
"unknown action" annoying case.
* Py_Main() now reads the PYTHONHOME environment variable
* Add _Py_GetPythonHomeWithConfig() private function
* Add _PyWarnings_InitWithConfig()
* init_filters() doesn't get the current core configuration from the
current interpreter or Python thread anymore. Pass explicitly the
configuration to _PyWarnings_InitWithConfig().
* _Py_InitializeCore() now fails on _PyWarnings_InitWithConfig()
failure.
* Pass configuration as constant
* Optimize warnings.filterwarnings(). Replace re.compile('') with
None to avoid the cost of calling a regex.match() method, whereas
it always matchs.
* Optimize get_warnings_attr(): replace PyObject_GetAttrString() with
_PyObject_GetAttrId().
Cleanup also create_filter():
* Use _Py_IDENTIFIER() to allow to cleanup strings at Python
finalization
* Replace Py_FatalError() with a regular exceptions
The developer mode (-X dev) now creates all default warnings filters
to order filters in the correct order to always show ResourceWarning
and make BytesWarning depend on the -b option.
Write a functional test to make sure that ResourceWarning is logged
twice at the same location in the developer mode.
Add a new 'dev_mode' field to _PyCoreConfig.
When Python is build is debug mode (Py_DEBUG), DeprecationWarning,
PendingDeprecationWarning and ImportWarning warnings are now
displayed by default.
test_venv: run "-m pip" and "-m ensurepip._uninstall" with -W
ignore::DeprecationWarning since pip code is not part of Python.
Get rid of _PyObject_HasAttrId() and PyDict_GetItemString().
Silence only expected AttributeError, KeyError and ImportError when
get an attribute, look up in a dict or import a module.
The concrete PyDict_* API is used to interact with PyInterpreterState.modules in a number of places. This isn't compatible with all dict subclasses, nor with other Mapping implementations. This patch switches the concrete API usage to the corresponding abstract API calls.
We also add a PyImport_GetModule() function (and some other helpers) to reduce a bunch of code duplication.
PR #1638, for bpo-28411, causes problems in some (very) edge cases. Until that gets sorted out, we're reverting the merge. PR #3506, a fix on top of #1638, is also getting reverted.
* group the (stateful) runtime globals into various topical structs
* consolidate the topical structs under a single top-level _PyRuntimeState struct
* add a check-c-globals.py script that helps identify runtime globals
Other globals are excluded (see globals.txt and check-c-globals.py).
* group the (stateful) runtime globals into various topical structs
* consolidate the topical structs under a single top-level _PyRuntimeState struct
* add a check-c-globals.py script that helps identify runtime globals
Other globals are excluded (see globals.txt and check-c-globals.py).
Issue #28915: Replace _PyObject_CallMethodId() with
_PyObject_CallMethodIdObjArgs() in various modules when the format string was
only made of "O" formats, PyObject* arguments.
_PyObject_CallMethodIdObjArgs() avoids the creation of a temporary tuple and
doesn't have to parse a format string.
Replace
_PyObject_CallArg1(func, arg)
with
PyObject_CallFunctionObjArgs(func, arg, NULL)
Using the _PyObject_CallArg1() macro increases the usage of the C stack, which
was unexpected and unwanted. PyObject_CallFunctionObjArgs() doesn't have this
issue.
Issue #28858: The change b9c9691c72c5 introduced a regression. It seems like
_PyObject_CallArg1() uses more stack memory than
PyObject_CallFunctionObjArgs().
Replace
PyObject_CallFunction(func, "O", arg)
and
PyObject_CallFunction(func, "O", arg, NULL)
with
_PyObject_CallArg1(func, arg)
Replace
PyObject_CallFunction(func, NULL)
with
_PyObject_CallNoArg(func)
_PyObject_CallNoArg() and _PyObject_CallArg1() are simpler and don't allocate
memory on the C stack.
* PyObject_CallFunctionObjArgs(func, NULL) => _PyObject_CallNoArg(func)
* PyObject_CallFunctionObjArgs(func, arg, NULL) => _PyObject_CallArg1(func, arg)
PyObject_CallFunctionObjArgs() allocates 40 bytes on the C stack and requires
extra work to "parse" C arguments to build a C array of PyObject*.
_PyObject_CallNoArg() and _PyObject_CallArg1() are simpler and don't allocate
memory on the C stack.
This change is part of the fastcall project. The change on listsort() is
related to the issue #23507.
Hansraj Das
Jeroen Demeyer
Eric Snow
Victor Stinner
Serhiy Storchaka
Benjamin Peterson
Zackery Spytz
Thomas Kluyver
Nathaniel J. Smith
Yury Selivanov
Nick Coghlan
Victor Stinner
luzpaz
Oren Milman