Add new functions to get the Python interpreter behavior:
* _PyPreConfig_InitPythonConfig()
* _PyCoreConfig_InitPythonConfig()
Add new functions to get an isolated configuration:
* _PyPreConfig_InitIsolatedConfig()
* _PyCoreConfig_InitIsolatedConfig()
Replace _PyPreConfig_INIT and _PyCoreConfig_INIT with new functions
_PyPreConfig_Init() and _PyCoreConfig_Init().
_PyCoreConfig: set configure_c_stdio and parse_argv to 0 by default
to behave as Python 3.6 in the default configuration.
_PyCoreConfig_Read() no longer sets coerce_c_locale_warn to 1 if it's
equal to 0. coerce_c_locale_warn must now be set to -1 (ex: using
_PyCoreConfig_InitPythonConfig()) to enable C locale coercion
warning.
Add unit tests for _PyCoreConfig_InitPythonConfig()
and _PyCoreConfig_InitIsolatedConfig().
Changes:
* Rename _PyCoreConfig_GetCoreConfig() to _PyPreConfig_GetCoreConfig()
* Fix core_read_precmdline(): handle parse_argv=0
* Fix _Py_PreInitializeFromCoreConfig(): pass coreconfig.argv
to _Py_PreInitializeFromPyArgv(), except if parse_argv=0
* Add PyMemAllocatorName enum
* _PyPreConfig.allocator type becomes PyMemAllocatorName, instead of
char*
* Remove _PyPreConfig_Clear()
* Add _PyMem_GetAllocatorName()
* Rename _PyMem_GetAllocatorsName() to
_PyMem_GetCurrentAllocatorName()
* Remove _PyPreConfig_SetAllocator(): just call
_PyMem_SetupAllocators() directly, we don't have do reallocate the
configuration with the new allocator anymore!
* _PyPreConfig_Write() parameter becomes const, as it should be in
the first place!
* Add a private _Py_InitializeMain() function.
* Add again _PyCoreConfig._init_main.
* _Py_InitializeFromConfig() now uses _init_main to decide
if _Py_InitializeMainInterpreter() should be called.
* _PyCoreConfig: rename _frozen to pathconfig_warnings, its value is
now the opposite of Py_FrozenFlag.
* Add an unit test for _init_main=0 and _Py_InitializeMain().
We cannot use "unsigned int" for exitcode on Windows, since
Py_Main() and _Py_RunMain() always return an "int".
Changes:
* _PyPathConfig_ComputeSysPath0() now returns -1 if an exception is
raised.
* pymain_run_python() no longer uses _PyInitError but display the
exception and set exitcode to 1 in case of error.
* Fix _Py_RunMain(): return an exitcode rather than calling
exit() on pymain_run_python() failure.
* _Py_ExitInitError() no longer uses ExitProcess() on Windows, use
exit() on all platforms.
* _Py_ExitInitError() now fails with a fatal error if 'err' is not an
error not an exit.
Add "struct _ceval_runtime_state *ceval = &_PyRuntime.ceval;" local
variables to function to better highlight the dependency on the
global variable _PyRuntime and to point directly to _PyRuntime.ceval
field rather than on the larger _PyRuntime.
Changes:
* Add _PyRuntimeState_GetThreadState(runtime) macro.
* Add _PyEval_AddPendingCall(ceval, ...) and
_PyThreadState_Swap(gilstate, ...) functions.
* _PyThreadState_GET() macro now calls
_PyRuntimeState_GetThreadState() using &_PyRuntime.
* Add 'ceval' parameter to COMPUTE_EVAL_BREAKER(),
SIGNAL_PENDING_SIGNALS(), _PyEval_SignalAsyncExc(),
_PyEval_SignalReceived() and _PyEval_FiniThreads() macros and
functions.
* Add 'tstate' parameter to call_function(), do_call_core() and
do_raise().
* Add 'runtime' parameter to _Py_CURRENTLY_FINALIZING(),
_Py_FinishPendingCalls() and _PyThreadState_DeleteExcept()
macros and functions.
* Declare 'runtime', 'tstate', 'ceval' and 'eval_breaker' variables
as constant.
_PyCoreConfig_SetPyArgv() and _PyCoreConfig_SetWideString() now
pre-initialize Python if needed to ensure that the locale encoding is
properly configured.
* Add _Py_PreInitializeFromPyArgv() internal function.
* Add 'args' parameter to _Py_PreInitializeFromCoreConfig()
_PyCoreConfig: Change filesystem_encoding, filesystem_errors,
stdio_encoding and stdio_errors fields type from char* to wchar_t*.
Changes:
* PyInterpreterState: replace fscodec_initialized (int) with fs_codec
structure.
* Add get_error_handler_wide() and unicode_encode_utf8() helper
functions.
* Add error_handler parameter to unicode_encode_locale()
and unicode_decode_locale().
* Remove _PyCoreConfig_SetString().
* Rename _PyCoreConfig_SetWideString() to _PyCoreConfig_SetString().
* Rename _PyCoreConfig_SetWideStringFromString()
to _PyCoreConfig_DecodeLocale().
Add _Py_FORCE_UTF8_LOCALE and _Py_FORCE_UTF8_FS_ENCODING macros to
avoid factorize "#if defined(__ANDROID__) || defined(__VXWORKS__)"
and "#if defined(__APPLE__)".
Cleanup also config_init_fs_encoding().
* Remove _PyInitError.user_err field and _Py_INIT_USER_ERR() macro:
use _Py_INIT_ERR() instead. _Py_ExitInitError() now longer calls
abort() on error: exit with exit code 1 instead.
* Add _PyInitError._type private field.
* exitcode field type is now unsigned int on Windows.
* Rename prefix field to _func.
* Rename msg field to err_msg.
* Add _PyEval_FiniThreads2(). _PyEval_FiniThreads() now only clears
the pending lock, whereas _PyEval_FiniThreads2() destroys the GIL.
* pymain_free() now calls _PyEval_FiniThreads2().
* Py_FinalizeEx() now calls _PyEval_FiniThreads().
Py_FinalizeEx() now clears _PyRuntime.warnings variables and
_PyRuntime.exitfuncs.
Changes:
* Add _PyWarnings_Fini(): called by Py_FinalizeEx()
* call_ll_exitfuncs() now clears _PyRuntime.exitfuncs while iterating
on it (on backward order).
Py_InitializeEx() now uses a runtime variable passed to subfunctions,
rather than working directly on the global variable _PyRuntime.
Add 'runtime' parameter to _PyCoreConfig_Write(), _PySys_Create(),
_PySys_InitMain(), _PyGILState_Init(),
emit_stderr_warning_for_legacy_locale() and other subfunctions.
* Add a 'runtime' variable to Py_FinalizeEx() rather than working
directly on the global variable _PyRuntime
* Add a 'runtime' parameter to _PyGC_Fini(), _PyGILState_Fini()
and call_ll_exitfuncs()
Fix Python Initialization code on FreeBSD to detect properly when
stdin file descriptor (fd 0) is invalid.
On FreeBSD, fstat() must be used to check if stdin (fd 0) is valid.
dup(0) doesn't fail if stdin is invalid in some cases.
This is effectively an un-revert of #11617 and #12024 (reverted in #12159). Portions of those were merged in other PRs (with lower risk) and this represents the remainder. Note that I found 3 different bugs in the original PRs and have fixed them here.
bpo-36443, bpo-36202: Since Python 3.7.0, calling Py_DecodeLocale()
before Py_Initialize() produces mojibake if the LC_CTYPE locale is
coerced and/or if the UTF-8 Mode is enabled by the user
configuration. This change fix the issue by disabling LC_CTYPE
coercion and UTF-8 Mode by default. They must now be enabled
explicitly (opt-in) using the new _Py_PreInitialize() API with
_PyPreConfig.
When embedding Python, set coerce_c_locale and utf8_mode attributes
of _PyPreConfig to -1 to enable automatically these parameters
depending on the LC_CTYPE locale, environment variables and command
line arguments
Alternative: Setting Py_UTF8Mode to 1 always explicitly enables the
UTF-8 Mode.
Changes:
* _PyPreConfig_INIT now sets coerce_c_locale and utf8_mode to 0 by
default.
* _Py_InitializeFromArgs() and _Py_InitializeFromWideArgs() can now
be called with config=NULL.
* _PyCoreConfig_Write() now updates _PyRuntime.preconfig
* Remove _PyPreCmdline_Copy()
* _PyPreCmdline_Read() now accepts _PyPreConfig and _PyCoreConfig
optional configurations.
* Rename _PyPreConfig_ReadFromArgv() to _PyPreConfig_Read(). Simplify
the code.
* Calling _PyCoreConfig_Read() no longer adds the warning options
twice: don't add a warning option if it's already in the list.
* Rename _PyCoreConfig_ReadFromArgv() to _PyCoreConfig_Read().
* Rename config_from_cmdline() to _PyCoreConfig_ReadFromArgv().
* Add more assertions on _PyCoreConfig in _PyCoreConfig_Read().
* Move some functions.
* Make some config functions private.
* Initialize _PyPreConfig.dev_mode to -1.
* _PyPreConfig_Read(): coreconfig has the priority over preconfig.
* _PyCoreConfig_Read() now calls _PyPreCmdline_Read() internally.
* config_from_cmdline() now pass _PyPreCmdline to config_read().
* Add _PyPreCmdline_Copy().
Prepare code to move some _PyPreConfig parameters into _PyPreCmdline.
Changes:
* _PyCoreConfig_ReadFromArgv(): remove preconfig parameter,
use _PyRuntime.preconfig.
* Add _PyPreCmdline_GetPreConfig() (called by _PyPreConfig_Read()).
* Rename _PyPreCmdline_Init() to _PyPreCmdline_SetArgv()
* Factorize _Py_PreInitializeFromPreConfig() code: add
pyinit_preinit().
* _PyPreConfig_Read() now sets coerce_c_locale to 2 if it must be
coerced.
* Remove _PyCoreConfig_ReadPreConfig().
* _PyCoreConfig_Write() now copies updated preconfig into _PyRuntime.
* Add _PyRuntime.pre_initialized: set to 1 when Python
is pre-initialized
* Add _Py_PreInitialize() and _Py_PreInitializeFromPreConfig().
* _PyCoreConfig_Read() now calls _Py_PreInitialize().
* Move _PyPreConfig_GetGlobalConfig() and
_PyCoreConfig_GetGlobalConfig() calls from main.c to preconfig.c
and coreconfig.c.
Calling _PyRuntime_Initialize() after _PyRuntime_Finalize() now re-initializes
_PyRuntime structure. Previously, _PyRuntime_Initialize() did
nothing in that case.
* _PyPreConfig_Read() now sets temporarily LC_CTYPE to the user
preferred locale, as _PyPreConfig_Write() will do permanentely.
* Fix _PyCoreConfig_Clear(): clear run_xxx attributes
* _Py_SetArgcArgv() doesn't have to be exported
* _PyCoreConfig_SetGlobalConfig() no longer applies preconfig
* _PyPreConfig_Write() now reallocates the pre-configuration with the
new memory allocator.
* It is no longer needed to force the "default raw memory allocator"
to clear pre-configuration and core configuration. Simplify the
code.
* _PyPreConfig_Write() now does nothing if called after
Py_Initialize(): no longer check if the allocator is the same.
* Remove _PyMem_GetDebugAllocatorsName(): dev mode sets again
allocator to "debug".
* _PyPreConfig_Write() now sets the memory allocator.
* _PyPreConfig_Write() gets a return type: _PyInitError.
* _Py_InitializeCore() now reads and writes the pre-configuration
(set the memory allocator, configure the locale) before reading and
writing the core configuration.
* Move 'allocator' and 'dev_mode' fields from _PyCoreConfig
to _PyPreConfig.
* Fix InitConfigTests of test_embed: dev_mode sets allocator to
"debug", add a new tests for env vars with dev mode enabled.
* Move following fields from _PyCoreConfig to _PyPreConfig:
* coerce_c_locale
* coerce_c_locale_warn
* legacy_windows_stdio
* utf8_mode
* _PyPreConfig_ReadFromArgv() is now responsible to choose the
filesystem encoding
* _PyPreConfig_Write() now sets the LC_CTYPE locale
* Revert "bpo-36097: Use only public C-API in the_xxsubinterpreters module (adding as necessary). (#12003)"
This reverts commit bcfa450f21.
* Revert "bpo-33608: Simplify ceval's DISPATCH by hoisting eval_breaker ahead of time. (gh-12062)"
This reverts commit bda918bf65.
* Revert "bpo-33608: Use _Py_AddPendingCall() in _PyCrossInterpreterData_Release(). (gh-12024)"
This reverts commit b05b711a2c.
* Revert "bpo-33608: Factor out a private, per-interpreter _Py_AddPendingCall(). (GH-11617)"
This reverts commit ef4ac967e2.
Add a new _Py_INIT_EXIT() macro to be able to exit Python with an
exitcode using _PyInitError API. Rewrite function calls by
pymain_main() to use _PyInitError.
Changes:
* Remove _PyMain.err and _PyMain.status field
* Add _Py_INIT_EXIT() macro and _PyInitError.exitcode field.
* Rename _Py_FatalInitError() to _Py_ExitInitError().
The whole coreconfig.h header is now excluded from Py_LIMITED_API.
Move functions definitions into a new internal pycore_coreconfig.h
header.
* Move Include/coreconfig.h to Include/cpython/coreconfig.h
* coreconfig.h header is now excluded from Py_LIMITED_API
* Move functions to pycore_coreconfig.h
* bpo-1054041: Exit properly by a signal after a ^C.
An uncaught KeyboardInterrupt exception means the user pressed ^C and
our code did not handle it. Programs that install SIGINT handlers are
supposed to reraise the SIGINT signal to the SIG_DFL handler in order
to exit in a manner that their calling process can detect that they
died due to a Ctrl-C. https://www.cons.org/cracauer/sigint.html
After this change on POSIX systems
while true; do python -c 'import time; time.sleep(23)'; done
can be stopped via a simple Ctrl-C instead of the shell infinitely
restarting a new python process.
What to do on Windows, or if anything needs to be done there has not
yet been determined. That belongs in its own PR.
TODO(gpshead): A unittest for this behavior is still needed.
* Do the unhandled ^C check after pymain_free.
* Return STATUS_CONTROL_C_EXIT on Windows.
* Fix ifdef around unistd.h include.
* 📜🤖 Added by blurb_it.
* Add STATUS_CTRL_C_EXIT to the os module on Windows
* Add unittests.
* Don't send CTRL_C_EVENT in the Windows test.
It was causing CI systems to bail out of the entire test suite.
See https://dev.azure.com/Python/cpython/_build/results?buildId=37980
for example.
* Correct posix test (fail on macOS?) check.
* STATUS_CONTROL_C_EXIT must be unsigned.
* Improve the error message.
* test typo :)
* Skip if the bash version is too old.
...and rename the windows test to reflect what it does.
* min bash version is 4.4, detect no bash.
* restore a blank line i didn't mean to delete.
* PyErr_Occurred() before the Py_DECREF(co);
* Don't add os.STATUS_CONTROL_C_EXIT as a constant.
* Update the Windows test comment.
* Refactor common logic into a run_eval_code_obj fn.
* Split _Py_InitializeCore_impl() into subfunctions: add multiple pycore_init_xxx() functions
* Preliminary sys.stderr is now set earlier to get an usable
sys.stderr ealier.
* Move code into _Py_Initialize_ReconfigureCore() to be able to call
it from _Py_InitializeCore().
* Split _PyExc_Init(): create a new _PyBuiltins_AddExceptions()
function.
* Call _PyExc_Init() earlier in _Py_InitializeCore_impl()
and new_interpreter() to get working exceptions earlier.
* _Py_ReadyTypes() now returns _PyInitError rather than calling
Py_FatalError().
* Misc code cleanup
* The PyByteArray_Init() and PyByteArray_Fini() functions have been
removed. They did nothing since Python 2.7.4 and Python 3.2.0, were
excluded from the limited API (stable ABI), and were not
documented.
* Move "_PyXXX_Init()" and "_PyXXX_Fini()" declarations from
Include/cpython/pylifecycle.h to
Include/internal/pycore_pylifecycle.h. Replace
"PyAPI_FUNC(TYPE)" with "extern TYPE".
* _PyExc_Init() now returns an error on failure rather than calling
Py_FatalError(). Move macros inside _PyExc_Init() and undefine them
when done. Rewrite macros to make them look more like statement:
add ";" when using them, add "do { ... } while (0)".
* _PyUnicode_Init() now returns a _PyInitError error rather than call
Py_FatalError().
* Move stdin check from _PySys_BeginInit() to init_sys_streams().
* _Py_ReadyTypes() now returns a _PyInitError error rather than
calling Py_FatalError().
bpo-34523, bpo-35290: C locale coercion now resets the Python
internal "force ASCII" mode. This change fix the filesystem encoding
on FreeBSD CURRENT, which has a new "C.UTF-8" locale, when
the UTF-8 mode is disabled.
Add _Py_ResetForceASCII(): _Py_SetLocaleFromEnv() now calls it.
* The _PySys_EndInit() function now copies the
config->module_search_path list, so config is longer modified when
sys.path is updated.
* config->warnoptions list and config->xoptions dict are also copied
* test_embed: InitConfigTests now also tests
main_config['module_search_path']
* Fix _Py_InitializeMainInterpreter(): don't use config->warnoptions
but sys.warnoptions to decide if the warnings module should
be imported at startup.
* ast.h now includes Python-ast.h and node.h
* parsetok.h now includes node.h and grammar.h
* symtable.h now includes Python-ast.h
* Modify asdl_c.py to enhance Python-ast.h:
* Add #ifndef/#define Py_PYTHON_AST_H to be able to include the header
twice
* Add "extern { ... }" for C++
* Undefine "Yield" macro conflicting with winbase.h
* Remove "#undef Yield" from C files, it's now done in Python-ast.h
* Remove now useless includes in C files
* And pycore_lifecycle.h and pycore_pathconfig.h headers to
Include/internal/
* Move Py_BUILD_CORE specific code from coreconfig.h and
pylifecycle.h to pycore_pathconfig.h and pycore_lifecycle.h
* Move _Py_wstrlist_XXX() definitions and _PyPathConfig code
from pycore_state.h to pycore_pathconfig.h
* Move "Init" and "Fini" function definitions from pylifecycle.c to
pycore_lifecycle.h.
If Py_BUILD_CORE is defined, the PyThreadState_GET() macro access
_PyRuntime which comes from the internal pycore_state.h header.
Public headers must not require internal headers.
Move PyThreadState_GET() and _PyInterpreterState_GET_UNSAFE() from
Include/pystate.h to Include/internal/pycore_state.h, and rename
PyThreadState_GET() to _PyThreadState_GET() there.
The PyThreadState_GET() macro of pystate.h is now redefined when
pycore_state.h is included, to use the fast _PyThreadState_GET().
Changes:
* Add _PyThreadState_GET() macro
* Replace "PyThreadState_GET()->interp" with
_PyInterpreterState_GET_UNSAFE()
* Replace PyThreadState_GET() with _PyThreadState_GET() in internal C
files (compiled with Py_BUILD_CORE defined), but keep
PyThreadState_GET() in the public header files.
* _testcapimodule.c: replace PyThreadState_GET() with
PyThreadState_Get(); the module is not compiled with Py_BUILD_CORE
defined.
* pycore_state.h now requires Py_BUILD_CORE to be defined.
Don't call _Py_FatalError_PrintExc() nor flush_std_files() if the
current thread doesn't hold the GIL, or if the current thread
has no Python state thread.
Configuring python with ./configure --with-pydebug CFLAGS="-D COUNT_ALLOCS -O0"
makes "make smelly" fail as some symbols were being exported without the "Py_" or
"_Py" prefixes.
* Revert "bpo-34589: Add -X coerce_c_locale command line option (GH-9378)"
This reverts commit dbdee0073c.
* Revert "bpo-34589: C locale coercion off by default (GH-9073)"
This reverts commit 7a0791b699.
* Revert "bpo-34589: Make _PyCoreConfig.coerce_c_locale private (GH-9371)"
This reverts commit 188ebfa475.
_PyCoreConfig:
* Rename coerce_c_locale to _coerce_c_locale
* Rename coerce_c_locale_warn to _coerce_c_locale_warn
These fields are now private (name prefixed by "_").
GCC complains:
Python/pylifecycle.c: In function ‘_Py_InitializeFromConfig’:
Python/pylifecycle.c:900:13: warning: ‘interp’ may be used uninitialized in this function [-Wmaybe-uninitialized]
err = _Py_InitializeMainInterpreter(interp, &main_config);
~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This seems spurious since &interp is passed to _Py_InitializeCore. Anyway, we
can easily initialize to quiet the warning.
Use the core configuration of the interpreter, rather
than using global configuration variables. For example, replace
Py_QuietFlag with core_config->quiet.
_PyCoreConfig_Read() is now responsible to choose the filesystem
encoding and error handler. Using Py_Main(), the encoding is now
chosen even before calling Py_Initialize().
_PyCoreConfig.filesystem_encoding is now the reference, instead of
Py_FileSystemDefaultEncoding, for the Python filesystem encoding.
Changes:
* Add filesystem_encoding and filesystem_errors to _PyCoreConfig
* _PyCoreConfig_Read() now reads the locale encoding for the file
system encoding.
* PyUnicode_EncodeFSDefault() and PyUnicode_DecodeFSDefaultAndSize()
now use the interpreter configuration rather than
Py_FileSystemDefaultEncoding and Py_FileSystemDefaultEncodeErrors
global configuration variables.
* Add _Py_SetFileSystemEncoding() and _Py_ClearFileSystemEncoding()
private functions to only modify Py_FileSystemDefaultEncoding and
Py_FileSystemDefaultEncodeErrors in coreconfig.c.
* _Py_CoerceLegacyLocale() now takes an int rather than
_PyCoreConfig for the warning.
On Windows, the LC_CTYPE is now set to the user preferred locale at
startup: _Py_SetLocaleFromEnv(LC_CTYPE) is now called during the
Python initialization. Previously, the LC_CTYPE locale was "C" at
startup, but changed when calling setlocale(LC_CTYPE, "") or
setlocale(LC_ALL, "").
pymain_read_conf() now also calls _Py_SetLocaleFromEnv(LC_CTYPE) to
behave as _Py_InitializeCore(). Moreover, it doesn't save/restore the
LC_ALL anymore.
On Windows, standard streams like sys.stdout now always use
surrogateescape error handler by default (ignore the locale).
Standard streams like sys.stdout now use the "surrogateescape" error
handler, instead of "strict", on the POSIX locale (when the C locale is not
coerced and the UTF-8 Mode is disabled).
Add tests on sys.stdout.errors with LC_ALL=POSIX.
* _Py_InitializeCore() now sets the LC_CTYPE locale to the user
preferred locale before checking if the C locale should be coerced
or not in _PyCoreConfig_Read().
* Fix pymain_read_conf(): remember if the C locale has been coerced
when the configuration should be read again if the encoding has
changed.
Python now gets the locale encoding with C code to initialize the encoding
of standard streams like sys.stdout. Moreover, the encoding is now
initialized to the Python codec name to get a normalized encoding name and
to ensure that the codec is loaded. The change avoids importing
_bootlocale and _locale modules at startup by default.
When the PYTHONIOENCODING environment variable only contains an encoding,
the error handler is now is now set explicitly to "strict".
Rename also get_default_standard_stream_error_handler() to
get_stdio_errors().
Reduce the buffer to format the "cpXXX" string (Windows locale encoding).
On HP-UX with C or POSIX locale, sys.getfilesystemencoding() now returns
"ascii" instead of "roman8" (when the UTF-8 Mode is disabled and the C locale
is not coerced).
nl_langinfo(CODESET) announces "roman8" whereas it uses the Latin1
encoding in practice.
* Add Include/coreconfig.h
* Move config_*() and _PyCoreConfig_*() functions from Modules/main.c
to a new Python/coreconfig.c file.
* Inline _Py_ReadHashSeed() into config_init_hash_seed()
* Move global configuration variables to coreconfig.c
* If _Py_InitializeCore() is called twice, the second call now copies
and apply (partially) the new configuration.
* Rename _Py_CommandLineDetails to _PyCmdline
* Move more code into pymain_init(). The core configuration created
by Py_Main() is new destroyed before running Python to reduce the
memory footprint.
* _Py_InitializeCore() now returns the created interpreter.
_Py_InitializeMainInterpreter() now expects an interpreter.
* Remove _Py_InitializeEx_Private(): _freeze_importlib now uses
_Py_InitializeFromConfig()
* _PyCoreConfig_InitPathConfig() now only computes the path
configuration if needed.
* _PyCoreConfig: add isolated and site_import attributes
* Replace Py_IgnoreEnvironment with config->ignore_environment when
reading the current configuration
* _PyCoreConfig_Read() now sets ignore_environment, utf8_mode,
isolated and site_import from Py_IgnoreEnvironment, Py_UTF8Mode,
Py_IsolatedFlag and Py_NoSiteFlag
* _Py_InitializeCore() now sets Py_xxx flags from the configuration
* pymain_read_conf() now uses _PyCoreConfig_Copy() to save/restore
the configuration.
* Rename _disable_importlib of _PyCoreConfig to _install_importlib
* _PyCoreConfig_SetGlobalConfig() now also set
Py_HashRandomizationFlag
* Replace !Py_NoSiteFlag with core_config->site_import
* _PyCoreConfig_Read() no longer directly modifies Py_IsolatedFlag
and Py_NoSiteFlag global configuration flags. The function now
requires two pointers to integer, so these flags can be set later,
to avoid side effets in _PyCoreConfig_Read().
* pathconfig_global_init() now leaves Py_IsolatedFlag and
Py_NoSiteFlag unchanged.
* Fix pathconfig_global_init(): avoid computing the path
configuration twice, use _PyCoreConfig_SetPathConfig().
Rework _PyCoreConfig_Read() function which *reads* core configuration
to not *modify* the path configuration.
A new _PyCoreConfig_SetPathConfig() function now recreates the path
configuration from the core configuration. This function is now
called very late in _Py_InitializeCore(), just before calling
initimport().
Changes:
* Add _PyCoreConfig.dll_path
* Py_SetPath() now fails with a fatal python error on memory
allocation failure.
* Rename _PyPathConfig_Calculate() to _PyPathConfig_Calculate_impl()
* Replace _PyPathConfig_Init() with _PyPathConfig_Calculate(): the
function now requires a _PyPathConfig
* Add _PyPathConfig_SetGlobal() to set the _Py_path_config global
variable.
* Add _PyCoreConfig_InitPathConfig(): compute the path configuration
* Add _PyCoreConfig_SetPathConfig(): set path configuration from core
configuration
* Rename wstrlist_append() to _Py_wstrlist_append()
* _Py_wstrlist_append() now handles integer overflow.
Py_Main() can again be called after Py_Initialize(), as in Python
3.6. The new configuration is ignored, except of
_PyMainInterpreterConfig.argv which is used to update sys.argv.
External importers were being added in both phases of the import
system initialisation.
They're only supposed to be added in the second phase, after the
import machinery has been appropriately configured.
* _Py_InitializeCore() doesn't call _PyMem_SetupAllocators() anymore
if the PYTHONMALLOC environment variable is not set.
* pymain_cmdline() now sets the allocator to the default, instead of
setting the allocator in subfunctions.
* Py_SetStandardStreamEncoding() now calls
_PyMem_SetDefaultAllocator() to get a known allocator, to be able
to release the memory with the same allocator.
* Add _PyCoreConfig.install_signal_handlers
* Remove _PyMain.config: _PyMainInterpreterConfig usage is now
restricted to pymain_init_python_main().
* Rename _PyMain.core_config to _PyMain.config
* _PyMainInterpreterConfig_Read() now creates the xoptions dictionary
from the core config
* Fix _PyMainInterpreterConfig_Read(): don't replace xoptions and
argv if they are already set.
Merge _PyCoreConfig_ReadEnv() into _PyCoreConfig_Read(), and
_Py_CommandLineDetails usage is now restricted to pymain_cmdline().
Changes:
* _PyCoreConfig: Add nxoption, xoptions, nwarnoption and warnoptions
* Add _PyCoreConfig.program: argv[0] or ""
* Move filename, command, module and xoptions from
_Py_CommandLineDetails to _PyMain. xoptions _Py_OptList becomes
(int, wchar_t**) list.
* Add pymain_cmdline() function
* Rename copy_argv() to copy_wstrlist(). Rename clear_argv() to
clear_wstrlist(). Remove _Py_OptList structure: use (int,
wchar_t**) list instead.
* Rename pymain_set_flag_from_env() to pymain_get_env_flag()
* Rename pymain_set_flags_from_env() to pymain_get_env_flags()
* _PyMainInterpreterConfig_Read() now creates the warnoptions from
_PyCoreConfig.warnoptions
* Inline pymain_add_warning_dev_mode() and
pymain_add_warning_bytes_flag() into config_init_warnoptions()
* Inline pymain_get_program_name() into _PyCoreConfig_Read()
* _Py_CommandLineDetails: Replace warning_options with nwarnoption
and warnoptions. Replace env_warning_options with nenv_warnoption
and env_warnoptions.
* pymain_warnings_envvar() now has a single implementation for
Windows and Unix: use config_get_env_var_dup() to also get the
variable as wchar_t* on Unix.
Victor Stinner
Eric Snow
Stefan Krah
Stéphane Wirtel
Gregory P. Smith
Serhiy Storchaka
Pablo Galindo
Benjamin Peterson
Thomas Nyberg
Victor Stinner
Yury Selivanov
Marcel Plch