Build and link with private copy of Tcl/Tk 8.6 for the macOS 10.6+
installer. The 10.9+ installer variant already does this. This means that
the Python 3.7 provided by the python.org macOS installers no longer need or
use any external versions of Tcl/Tk, either system-provided or user-
installed, such as ActiveTcl.
test_asyncio hangs indefinitely on macOS 10.13.2+ on `read_pty_output()`
using the KqueueSelector. Closing `proto.transport` (as is done in
`write_pty_output()`) seems to fix it.
(cherry picked from commit 12f74d8608)
Co-authored-by: Nathan Henrie <n8henrie@users.noreply.github.com>
Also, re-enable test_read_pty_output on macOS.
This also fixespython/typing#512
This also fixespython/typing#511
As was discussed in both issues, some typing forms deserve to be treated
as immutable by copy and pickle modules, so that:
* copy(X) is X
* deepcopy(X) is X
* loads(dumps(X)) is X # pickled by reference
This PR adds such behaviour to:
* Type variables
* Special forms like Union, Any, ClassVar
* Unsubscripted generic aliases to containers like List, Mapping, Iterable
This not only resolves inconsistencies mentioned in the issues, but also
improves backwards compatibility with previous versions of Python
(including 3.6).
Note that this requires some dances with __module__ for type variables
(similar to NamedTuple) because the class TypeVar itself is define in typing,
while type variables should get module where they were defined.
https://bugs.python.org/issue32873
bpo-32844: subprocess: Fix a potential misredirection of a low fd to stderr.
When redirecting, subprocess attempts to achieve the following state:
each fd to be redirected to is less than or equal to the fd
it is redirected from, which is necessary because redirection
occurs in the ascending order of destination descriptors.
It fails to do so in a couple of corner cases,
for example, if 1 is redirected to 2 and 0 is closed in the parent.
Historically, -m added the empty string as sys.path
zero, meaning it resolved imports against the current
working directory, the same way -c and the interactive
prompt do.
This changes the sys.path initialisation to add the
*starting* working directory as sys.path[0] instead,
such that changes to the working directory while the
program is running will have no effect on imports
when using the -m switch.
- new test case for pre-initialization of sys.warnoptions and sys._xoptions
- restored ability to call these APIs prior to Py_Initialize
- updated the docs for the affected APIs to make it clear they can be
called before Py_Initialize
- also enhanced the existing embedding test cases
to check for expected settings in the sys module
Harden ssl module against LibreSSL CVE-2018-8970.
X509_VERIFY_PARAM_set1_host() is called with an explicit namelen. A new test
ensures that NULL bytes are not allowed.
Signed-off-by: Christian Heimes <christian@python.org>
LibreSSL 2.7 introduced OpenSSL 1.1.0 API. The ssl module now detects
LibreSSL 2.7 and only provides API shims for OpenSSL < 1.1.0 and
LibreSSL < 2.7.
Documentation updates and fixes for failing tests will be provided in
another patch set.
Signed-off-by: Christian Heimes <christian@python.org>
* Added new opcode END_ASYNC_FOR.
* Setting global StopAsyncIteration no longer breaks "async for" loops.
* Jumping into an "async for" loop is now disabled.
* Jumping out of an "async for" loop no longer corrupts the stack.
* Simplify the compiler.
If a non-dataclass derives from a frozen dataclass, allow attributes to be set.
Require either all of the dataclasses in a class hierarchy to be frozen, or all non-frozen.
Store `@dataclass` parameters on the class object under `__dataclass_params__`. This is needed to detect frozen base classes.
Multi-phase initialized modules allow m_traverse to be called while the
module is still being initialized, so module authors may need to account
for that.
Creating backup files with ~ suffix can be undesirable in some environment,
such as when building RPM packages. Instead of requiring the user to remove
those files manually, option -n was added, that simply disables this feature.
-n was selected because 2to3 has the same option with this behavior.
New tests also added.
I also made the comments in line with the builtin Grammar/Grammar. PEP 306 was
withdrawn, Kees Blom's railroad program has been lost to the sands of time for
at least 16 years now (I found a python-dev post from people looking for it).
fstat may block for long time if the file descriptor is on a
non-responsive NFS server, hanging all threads. Most fstat() calls are
handled by _Py_fstat(), releasing the GIL internally, but but
_Py_fstat_noraise() does not release the GIL, and most calls release the
GIL explicitly around it.
This patch fixes last 2 calls to _Py_fstat_no_raise(), avoiding hangs
when calling:
- mmap.mmap()
- os.urandom()
- random.seed()
In some conditions the standard streams will be None or closed in the child process (for example if using "pythonw" instead of "python" on Windows). Avoid failing with a non-0 exit code in those conditions.
Report and initial patch by poxthegreat.
Fix a crash on fork when using a custom memory allocator (ex: using
PYTHONMALLOC env var).
_PyGILState_Reinit() and _PyInterpreterState_Enable() now use the
default RAW memory allocator to allocate a new interpreters mutex on
fork.
Like Python, IDLE optionally runs one startup file in the Shell window
before presenting the first interactive input prompt. For IDLE,
option -s runs a file named in environmental variable IDLESTARTUP or
PYTHONSTARTUP; -r file runs file. Python sets __file__ to the startup
file name before running the file and unsets it before the first
prompt. IDLE now does the same when run normally, without the -n
option.
* Prevent low-grade poplib REDOS (CVE-2018-1060)
The regex to test a mail server's timestamp is susceptible to
catastrophic backtracking on long evil responses from the server.
Happily, the maximum length of malicious inputs is 2K thanks
to a limit introduced in the fix for CVE-2013-1752.
A 2KB evil response from the mail server would result in small slowdowns
(milliseconds vs. microseconds) accumulated over many apop calls.
This is a potential DOS vector via accumulated slowdowns.
Replace it with a similar non-vulnerable regex.
The new regex is RFC compliant.
The old regex was non-compliant in edge cases.
* Prevent difflib REDOS (CVE-2018-1061)
The default regex for IS_LINE_JUNK is susceptible to
catastrophic backtracking.
This is a potential DOS vector.
Replace it with an equivalent non-vulnerable regex.
Also introduce unit and REDOS tests for difflib.
Co-authored-by: Tim Peters <tim.peters@gmail.com>
Co-authored-by: Christian Heimes <christian@python.org>
OpenSSL 1.1 has introduced a new API to set the minimum and maximum
supported protocol version. The API is easier to use than the old
OP_NO_TLS1 option flags, too.
Since OpenSSL has no call to set minimum version to highest supported,
the implementation emulate maximum_version = MINIMUM_SUPPORTED and
minimum_version = MAXIMUM_SUPPORTED by figuring out the minumum and
maximum supported version at compile time.
Signed-off-by: Christian Heimes <christian@python.org>
Direct instantiation of SSLSocket and SSLObject objects is now prohibited.
The constructors were never documented, tested, or designed as public
constructors. The SSLSocket constructor had limitations. For example it was
not possible to enabled hostname verification except was
ssl_version=PROTOCOL_TLS_CLIENT with cert_reqs=CERT_REQUIRED.
SSLContext.wrap_socket() and SSLContext.wrap_bio are the recommended API
to construct SSLSocket and SSLObject instances. ssl.wrap_socket() is
also deprecated.
The only test case for direct instantiation was added a couple of days
ago for IDNA testing.
Signed-off-by: Christian Heimes <christian@python.org>
The ssl module function ssl.wrap_socket() has been de-emphasized
and deprecated in favor of the more secure and efficient
SSLContext.wrap_socket() method.
Signed-off-by: Christian Heimes <christian@python.org>
* bpo-32947: OpenSSL 1.1.1-pre1 / TLS 1.3 fixes
Misc fixes and workarounds for compatibility with OpenSSL 1.1.1-pre1 and
TLS 1.3 support. With OpenSSL 1.1.1, Python negotiates TLS 1.3 by
default. Some test cases only apply to TLS 1.2. Other tests currently
fail because the threaded or async test servers stop after failure.
I'm going to address these issues when OpenSSL 1.1.1 reaches beta.
OpenSSL 1.1.1 has added a new option OP_ENABLE_MIDDLEBOX_COMPAT for TLS
1.3. The feature is enabled by default for maximum compatibility with
broken middle boxes. Users should be able to disable the hack and CPython's test suite needs
it to verify default options.
Signed-off-by: Christian Heimes <christian@python.org>
When comprehensions switched to using a nested scope, the old
code for generating a temporary name to hold the accumulation
target became redundant, but was never actually removed.
Patch by Nitish Chandra.
unsafe_hash=False is now the default. It is the same behavior as the old hash=None parameter. unsafe_hash=True will try to add __hash__. If it already exists, TypeError is raised.
The ctypes module used to depend on indirect linking for dlopen. The shared
extension is now explicitly linked against libdl on platforms with dl.
Signed-off-by: Christian Heimes <christian@python.org>
The ssl module now detects missing NPN support in LibreSSL.
Co-Authored-By: Bernard Spil <brnrd@FreeBSD.org>
Signed-off-by: Christian Heimes <christian@python.org>
* The SSLSocket is no longer implemented on top of SSLObject to
avoid an extra level of indirection.
* Owner and session are now handled in the internal constructor.
* _ssl._SSLSocket now uses the same method names as SSLSocket and
SSLObject.
* Channel binding type check is now handled in C code. Channel binding
is always available.
The patch also changes the signature of SSLObject.__init__(). In my
opinion it's fine. A SSLObject is not a user-constructable object.
SSLContext.wrap_bio() is the only valid factory.
ssl.match_hostname() has been simplified and no longer depends on re and
ipaddress module for wildcard and IP addresses. Error reporting for invalid
wildcards has been improved.
Signed-off-by: Christian Heimes <christian@python.org>
Previously, the ssl module stored international domain names (IDNs)
as U-labels. This is problematic for a number of reasons -- for
example, it made it impossible for users to use a different version
of IDNA than the one built into Python.
After this change, we always convert to A-labels as soon as possible,
and use them for all internal processing. In particular, server_hostname
attribute is now an A-label, and on the server side there's a new
sni_callback that receives the SNI servername as an A-label rather than
a U-label.
Make test.support.temp_cwd() fork-safe. The context manager test.support.temp_cwd() no longer removes the temporary directory when executing in a process other than the parent it entered from.
If a forked child exits the context manager it won't do the cleanup.
Serhiy Storchaka
INADA Naoki
Terry Jan Reedy
Nick Coghlan
Eric V. Smith
Ned Deily
Julien Palard
Antoine Pitrou
Cheryl Sabella
Ivan Levkivskyi
Alexey Izbyshev
Garvit Khatri
Christian Heimes
Xiang Zhang
Himanshu Lakhara
jab
Thomas Moreau
Matt Eaton
aetracht
xdegaye
Marcel Plch
Miro Hrončok
Łukasz Langa
Antoine Pietri
Nir Soffer
Emanuele Gaifas
Andrew Svetlov
Yury Selivanov
Victor Stinner
Steve Dower
Jamie Davis
Jon Wayne Parrott
Joffrey F
Tobotimus
Nitish Chandra
Sergey Fedoseev
animalize
Anselm Kruis