Peter Schneider-Kamp.
Clarified some docstrings in the spirit of the patch; left out the
degrees() and radians() functions (see the patch comments on SF).
- Add an explicit call to PyType_Ready(&PyList_Type) to pythonrun.c
(just for the heck of it, really -- we should either explicitly
ready all types, or none).
New functions getnameinfo, getaddrinfo. New exceptions socket.gaierror,
socket.herror. Various new constants, in particular AF_INET6 and error
codes and parameters for getaddrinfo.
AF_INET6 support in setipaddr, makesockaddr, getsockaddr, getsockaddrlen,
gethost_common, PySocket_gethostbyaddr.
The ob_sval member of a string object isn't necessarily aligned to better
than a native long, so the new "q" and "Q" struct codes can't get away w/
casting tricks on platforms where LONG_LONG requires stricter-than-long
alignment. After I thought of a few elaborate workarounds, Guido bashed
me over the head with the obvious memcpy approach, herewith implemented.
Check for slice/item deletion, which calls slice/item assignment with a NULL
value, and raise a TypeError instead of coredumping. Bugreport and suggested
fix by Alex Martelli.
that info to code dynamically compiled *by* code compiled with generators
enabled. Doesn't yet work because there's still no way to tell the parser
that "yield" is OK (unlike nested_scopes, the parser has its fingers in
this too).
Replaced PyEval_GetNestedScopes by a more-general
PyEval_MergeCompilerFlags. Perhaps I should not have? I doubted it was
*intended* to be part of the public API, so just did.
Include sys/poll.h if it was found by the configure script. The OpenGroup
spec says poll.h is the correct header file to use, so that file is
preferred.
Also note that it isn't just Linux nice() that is broken: at least FreeBSD
and BSDI also have this problem. os.nice() should probably just be emulated
using getpriority()/setpriority(), if they are available, but I'll get to
that later.
This patch allows the readline module to build cleanly with GNU
readline 4.2 without breaking the build for earlier GNU readline
versions. The configure script checks for the presence of
rl_completion_matches in libreadline.
unicodeobject.h, which forces sizeof(Py_UNICODE) == sizeof(Py_UCS4).
(this may be good enough for platforms that doesn't have a 16-bit
type. the UTF-16 codecs don't work, though)
Protect several more uses of constants with #ifdefs; these are necessary on
(at least) SCO OpenServer 5. Fixes a non-SF-submitted bugreport by Michael
Kent.
the new PyLong_{As,From}{Unsigned,}LongLong tests, so the bulk of the
code is in the new #include file testcapi_long.h, which generates
different code depending on how macros are set. This sucks, but I couldn't
think of anything that sucked less.
UNIX headache? If we still maintain dependencies by hand, someone who
knows what they're doing should teach whatever needs it that
_testcapimodule.c includes testcapi_long.h.
Replaced PyLong_{As,From}{Unsigned,}LongLong guts with calls
to _PyLong_{As,From}ByteArray.
_testcapimodule.c:
Added strong tests of PyLong_{As,From}{Unsigned,}LongLong.
Fixes SF bug #432552 PyLong_AsLongLong() problems.
Possible bugfix candidate, but the fix relies on code added to longobject
to support the new q/Q structmodule format codes.
functions. I intend to replace their guts with calls to the new
_PyLong_{As,From}ByteArray() functions, but AFAICT there's no tests for
them at all now; I also suspect PyLong_AsLongLong() isn't catching all
overflow cases, but without a std test to demonstrate that why should you
believe me <wink>.
Also added a raiseTestError() utility function.
This completes the q/Q project.
longobject.c _PyLong_AsByteArray: The original code had a gross bug:
the most-significant Python digit doesn't necessarily have SHIFT
significant bits, and you really need to count how many copies of the sign
bit it has else spurious overflow errors result.
test_struct.py: This now does exhaustive std q/Q testing at, and on both
sides of, all relevant power-of-2 boundaries, both positive and negative.
NEWS: Added brief dict news while I was at it.
native mode, and only when config #defines HAVE_LONG_LONG. Standard mode
will eventually treat them as 8-byte ints across all platforms, but that
likely requires a new set of routines in longobject.c first (while
sizeof(long) >= 4 is guaranteed by C, there's nothing in C we can rely
on x-platform to hold 8 bytes of int, so we'll have to roll our own;
I'm thinking of a simple pair of conversion functions, Python long
to/from sized vector of unsigned bytes; that may be useful for GMP
conversions too; std q/Q would call them with size fixed at 8).
test_struct.py: In addition to adding some native-mode 'q' and 'Q' tests,
got rid of unused code, and repaired a non-portable assumption about
native sizeof(short) (it isn't 2 on some Cray boxes).
libstruct.tex: In addition to adding a bit of 'q'/'Q' docs (more needed
later), removed an erroneous footnote about 'I' behavior.
*are* obsolete; three variables and the maketrans() function are not
(yet) obsolete.
Add a compensating warnings.filterwarnings() call to test_strop.py.
Add this to the NEWS.
return a (C) long: PyArg_ParseTuple and Py_BuildValue may not let us get
at the size_t we really want, but C int is clearly too small for a 64-bit
box, and both the start parameter and the return value should work for
large mapped files even on 32-bit boxes. The code really needs to be
rethought from scratch (not by me, though ...).
1) it didn't obey the "start" parameter (and when it does, we must validate
the value)
2) the return value needs to be an absolute index, rather than relative to
some arbitrary point in the file
(checking CVS, it appears this method never worked; these changes bring it
into line with typical .find() behavior)
When getting a string buffer for a string we just created, use
PyString_AS_STRING() instead of PyString_AsString() to avoid the
call overhead and extra type check.
meaning infinity -- but at least warn about it in the code! I pissed
away a couple hours on this today, and don't wish the same on the next
in line.
Bugfix candidate.
means "replace everything". But the string module, string.replace()
amd test_string.py believe a 0 count means "replace nothing".
"Nothing" wins, strop loses.
Bugfix candidate.
Platform blew up on "123".replace("123", ""). Michael Hudson pinned the
blame on platform malloc(0) returning NULL.
This is a candidate for all bugfix releases.
This closes SF bug #231328.
Added all constants needed to use the functions defined in this module
that are not defined elsewhere (the O_* symbols are available in the
os module). No additonal modules are needed to use this now.
PyObject_AsFileDescriptor() -- it does the same thing everywhere, so
use it the same way everyone else does so that exceptions are
consistent. This means we have less code here, and we do not need to
resort to hackish ways of getting the Python-visible function name to
fdconv().
this could cause invalid paths to be returned for AF_UNIX sockets on some
platforms (including FreeBSD 4.2-RELEASE), appearantly because there is
no assurance that the address will be nul-terminated when filled in by the
kernel.
PySocketSock_recvfrom(): Use PyString_AS_STRING() to get the data pointer
of a string we create ourselves; there is no need for the extra type
check from PyString_AsString().
This closes SF bug #416573.
This patch does several things to termios:
(1) changes all functions to be METH_VARARGS
(2) changes all functions to be able to take a file object as the
first parameter, as per
http://mail.python.org/pipermail/python-dev/2001-February/012701.html
(3) give better error messages
(4) removes a bunch of comments that just repeat the docstrings
(5) #includes <termio.h> before #including <sys/ioctl.h> so more
#constants are actually #defined.
(6) a couple of docstring tweaks
I have tested this minimally (i.e. it builds, and
doesn't blow up too embarassingly) on OSF1/alpha and
on one of the sf compile farm's solaris boxes, and
rather more comprehansively on my linux/x86 box.
It still needs to be tested on all the other platforms
we build termios on.
This closes the code portion of SF patch #417081.
while not generally a good idea, this is used by RDF users, and works
to implement RDF-style namespace+localname concatenation as defined
in the RDF specifications. (This also corrects a backwards-compatibility
bug.)
Be more conservative while clearing out handlers; set the slot in the
self->handlers array to NULL before DECREFing the callback.
Still more adjustments to make the code style internally consistent.
OpenSSL versions beore 0.9.5. This just is too experimental to be
worth it, especially since the user would have to do some severe
hacking of the Modules/Setup file to even enable the EGD code, and
without the EGD code it would always spit out a warning on some
systems -- even when socket.ssl() is not used. Fixing that properly
is not my job; the EGD patch is clearly not so important that it
should hold up the 2.1 release.
always:
- #undef HAVE_CONFIG_H (because otherwise chardefs.h tries to include
strings.h)
- #include readline.h and history.h
and we never declare any readline function prototypes ourselves.
This makes it compile with readline 4.2, albeit with a few warnings.
Some of the remaining warnings are about completion_matches(), which
is renamed to rl_completion_matches().
I've tested it with various other versions, from 2.0 up, and they all
seem to work (some with warnings) -- but only on Red Hat Linux 6.2.
Fixing the warnings for readline 4.2 would break compatibility with
3.0 (and maybe even earlier versions), and readline doesn't seem to
have a way to test for its version at compile time, so I'd rather
leave the warnings in than break compilation with older versions.
problem reported by Neil Schemenauer on python-dev on 4/12/01, wth
subject "Problem with SSL and socketmodule on Debian Potato?".
It's tentative because Moshe objected, but Martin rebutted, and Moshe
seems unavailable for comments.
(Note that with OpenSSL 0.9.6a, I get a lot of compilation warnings
for socketmodule.c -- I'm assuming I can safely ignore these until 2.1
is released.)
before calling any callbacks. This is important
since the callback objects only look at themselves
to determine that they are invalide. This change
avoids a segfault when callbacks use a different
reference to an object in the process of being
deallocated.
This fixes SF bug #415660.
(with modification of existing dict elements!).
This is part of SF patch #409864: lazy fix for Pings bizarre scoping
crash.
The adaptation I made to Michael's patch was to change the error
handling to avoid masking other errors (moving the specific error
message to inside test_dict_inner()), and to insert a test for
dict==NULL at the start.
Michael Hudson suggested this fox for the Tru64 problem (SF bug
232597). It looks reasonable, it works on Tru64, and it doesn't beak
anything on Linux, so I say go for it.
of 2-space and 4-space indents. Whatever, when I saw the checkin diff it
was clear that what my editor thinks a tab means didn't match this module's
belief. Removed all the tabs from the lines I added and changed, left
everything else alone.
pickled into the signed(!) 4-byte BININT format, so were getting unpickled
again as negative ints. Repaired that.
Added some minimal docs at the top about what I've learned about the pickle
format codes (little of which was obvious from staring at the code,
although that's partly because all the size-related bugs greatly obscured
the true intent of the code).
Happy side effect: because save_int() needed to grow a *proper* range
check in order to fix this bug, it can now use the more-efficient BININT1,
BININT2 and BININT formats when the long's value is small enough to fit
in a signed 4-byte int (before this, on a sizeof(long)==8 box it always
used the general INT format for negative ints).
test_cpickle works again on sizeof(long)==8 machines. test_pickle is
still busted big-time.
binary pickle, and the latter contains a pickle of a negative Python
int i written on a sizeof(long)==4 box (and whether by cPickle or
pickle.py), it's read incorrectly as i + 2**32. The patch repairs that,
and allows test_cpickle.py (to which I added a relevant test case earlier
today) to work again on sizeof(long)==8 boxes.
There's another (at least one) sizeof(long)==8 binary pickle bug, but in
pickle.py instead. That bug is still there, and test_pickle.py doesn't
catch it yet (try pickling and unpickling, e.g., 1 << 46).
where sizeof(long)==8. This *was* broken on boxes where signed right
shifts didn't sign-extend, but not elsewhere. Unfortunately, apart
from the Cray T3E I don't know of such a box, and Guido has so far
refused to buy me any Cray machines for home Python testing <wink>.
More immediately interesting would be if someone could please test
this on *any* sizeof(long)==8 box, to make sure I didn't break it.
handling of EAGAIN.
This may or may not fix the problem for me (Mandrake 7.2 on a Dell
Optiplex GX110 desktop): I can't hear the output, but it does pass the
test now. It doesn't fix the problem for Fred (Mandrake 7.2 on a Dell
Inspiron 7500 which has the Maestro sound drivers). Fred suspects
that it's the kernel version in combination with the driver.
gives the CVS revision of this file even if it does not include the
extra RCS "$Revision: " cruft.
initpyexpat(): Use get_version_string() instead of hard-coding magic
indexes into the RCS string (which may be affected by export options).
tracked as soon as it is clear; this can decrease the number of roots for
the cycle detector sooner rather than later in applications which hold on
to weak references beyond the time of the invalidation.
If a module has a future statement enabling nested scopes, they are
also enable for the exec statement and the functions compile() and
execfile() if they occur in the module.
If Python is run with the -i option, which enters interactive mode
after executing a script, and the script it runs enables nested
scopes, they are also enabled in interactive mode.
XXX The use of -i with -c "from __future__ import nested_scopes" is
not supported. What's the point?
To support these changes, many function variants have been added to
pythonrun.c. All the variants names end with Flags and they take an
extra PyCompilerFlags * argument. It is possible that this complexity
will be eliminated in a future version of the interpreter in which
nested scopes are not optional.
with free variables. Thanks to Martin v. Loewis for finding two of
the problems. This fixes SF buf 405583.
There is also a C API change: PyFrame_New() is reverting to its
pre-2.1 signature. The change introduced by nested scopes was a
mistake. XXX Is this okay between beta releases?
cell_clear(), the GC helper, must decref its reference to break
cycles.
frame_dealloc() must dealloc all cell vars and free vars in addition
to locals.
eval_code2() setup code must INCREF cells it copies out of the
closure.
The STORE_DEREF opcode implementation must DECREF the object it passes
to PyCell_Set().
these can be missing on some (all?) Irix and Tru64 versions.
Protect the CRTSCTS value with a cast; this can be a larger value on
Solaris/SPARC.
This should fix SF tracker items #405092, #405350, and #405355.
defined and export both names.
Solaris also does not define CBAUDEX; it is not clear that CBAUDEXT
(which is defined there) is the same thing, so we only protect against
the lack of CBAUDEX.
Reported by Greg V. Wilson.
Fixed recno support (keys are integers rather than strings).
Work around DB bug that cause stdin to be closed by rnopen() when the
DB file needed to exist but did not (no longer segfaults).
This closes SF tracker patch #403445.
Also wrapped some long lines and added whitespace around operators -- FLD.
the internal API function to release the interned strings as the very
last thing before returning status. This aids in memory use debugging
because it eliminates a huge source of noise from the reports. This
is never called during normal (non-debugging) use because releasing
the interned strings slows Python's shutdown and isn't necessary
anyway because the system will always reclaim the memory.
(Fred, I'll leave the doc changes to you, because I don't know if you
want to delete libsoundex.tex or leave it in.
Someone else will have to tweak PC/os2vacpp/{config.c,makefile} and
PCbuild/pythoncore.dsp, both of which refer to soundex.c)
The bug report title isn't correct, but was on the right track.
Rev 2.13 applied a patch intended to improve asinh and acosh, but the
author mistakenly replaced the body of asin with their new code for asinh.
See bug report for all the gory details.
This patch: (a) puts the "new" (as of 2.13) asinh code into the asinh
function; and, (b) repairs asin via what Abramowitz & Stegun say it should
be (which is probably the same as what 2.12 did for asin, although I got
tired of matching parentheses before being 100% sure of that -- and I don't
care! The source of the old code is a mystery, and I *know* why I picked
the new code.).
* fixes the zlib decompress sync flush bug as reported in bug #124981
* avoids repeat calls to (in|de)flateEnd when destroying (de)compression
objects
* raises exception when allocating unused_data fails
* fixes memory leak when allocating unused_data fails
* raises exception when allocating decompress data fails
* removes vestigial code from decompress flush now that decompression
returns all available data
* tidies code so object compress/decompress/flush routines are consistent
compiled only for some versions of Expat, but was no longer needed as the
new implementation works for all versions. Keeping it created multiple
definitions for Expat 1.2, which caused compilation to fail.
in_callback field that's set to true whenever a callback into an
event handler is true. Needed for:
set_error(): Add line number of offset information to the exception
as attributes, so users don't need to parse the text of the
message.
set_error_attr(): New helper function for set_error().
xmlparse_GetInputContext(): New function of the parser object;
returns the document source for an event during a callback, None
at all other times.
xmlparse_SetParamEntityParsing(): Make the signature consistent with
the other parser methods (use xmlparseobject* for self instead of
PyObject*).
initpyexpat(): Don't lose the reference to the exception class!
call_with_frame(),
getcode(): Re-indent to be consistent with the rest of the file.
_testcapimodule.c
make sure PyList_Reverse doesn't blow up again
getargs.c
assert args isn't NULL at the top of vgetargs1 instead of
waiting for a NULL-pointer dereference at the end
Fix the .binary() method of mpz objects for 64-bit systems.
[Also removed a lot of trailing whitespace elsewhere in the file. --FLD]
This closes SF patch #103547.
of nested functions. Either is allowed in a function if it contains
no defs or lambdas or the defs and lambdas it contains have no free
variables. If a function is itself nested and has free variables,
either is illegal.
Revise the symtable to use a PySymtableEntryObject, which holds all
the revelent information for a scope, rather than using a bunch of
st_cur_XXX pointers in the symtable struct. The changes simplify the
internal management of the current symtable scope and of the stack.
Added new C source file: Python/symtable.c. (Does the Windows build
process need to be updated?)
As part of these changes, the initial _symtable module interface
introduced in 2.1a2 is replaced. A dictionary of
PySymtableEntryObjects are returned.
now carry a 'code' attribute that gives the Expat error
number.
Added support for additional handlers for Expat 1.95.*, including
XmlDeclHandler, EntityDeclHandler, ElementDeclHandler, and
AttlistDeclHandler. Associated constants are in the 'model'
sub-object.
Added two new attributes to the parser object: ordered_attributes and
specified_attributes. These are used to control how attributes are
reported and which attributes are reported.
Adds support for raw packets (AF_PACKET) under Linux. I haven't
tested this code thoroughly; it compiles and the basic calls all work
without crashing. Not sure what to actually do with raw sockets though.
Not sure what other platforms this might be useful for.
This involves changing the zlib build process to build zlib itself from sources, then use that library. Also updated are the comments to reflect the new official home of zlib, and add Windows specific notes regarding the build process.
"Partial" as the code uses sys.prefix in an attempt to locate 'w9xpopen.exe', but sys.prefix is not set if Python can't find it itself. So this _still_ fails in Pythonwin, but I am committing the patch for 2 reasons:
* Embedded apps that set sys.prefix or use PYTHONHOME will work
* The exception raised on failure to find the executable is far more obvious
directory. Modify meaning of -s option to specify the Modules directory.
Add -l option to specify library source directory when building extension
modules. Perhaps these names should be switched to avoid breaking old
code. Add -c compiler option to when emitting rules to build object files.
Neil Schemenauer
Martin v. Löwis
Fred Drake
Tim Peters
Guido van Rossum
Jack Jansen
Marc-André Lemburg
Thomas Wouters
Andrew M. Kuchling
Fredrik Lundh
Peter Schneider-Kamp
Mark Hammond
Greg Stein
Jeremy Hylton
Moshe Zadka
Skip Montanaro
Barry Warsaw
Sjoerd Mullender