It seems like this should be a different error than SystemError, but
I don't have any great ideas and SystemError was raised in 2.4 and earlier.
Will backport.
Check this and raise an error when something else is used - before
this change ctypes would hang or crash when such a callback was
called. This is a partial fix for #1574584.
Will backport to release25-maint.
installed to build extensions. This patch makes distutils emit a warning when
the compiler should use an SDK but that SDK is not installed, hopefully reducing
some confusion.
universal build of python on OSX 10.3 to ensure that those flags can be used
to compile code (the universal build uses compiler flags that aren't supported
on 10.3). This patches gives the same treatment to CFLAGS, PY_CFLAGS and
BLDSHARED.
* unified the way intobject, longobject and mystrtoul handle
values around -sys.maxint-1.
* in general, trying to entierely avoid overflows in any computation
involving signed ints or longs is extremely involved. Fixed a few
simple cases where a compiler might be too clever (but that's all
guesswork).
* more overflow checks against bad data in marshal.c.
* 2.5 specific: fixed a number of places that were still confusing int
and Py_ssize_t. Some of them could potentially have caused
"real-world" breakage.
* list.pop(x): fixing overflow issues on x was messy. I just reverted
to PyArg_ParseTuple("n"), which does the right thing. (An obscure
test was trying to give a Decimal to list.pop()... doesn't make
sense any more IMHO)
* trying to write a few tests...
The compiler was checking that there was something on the fblock
stack, but not that there was a loop on the stack. Fixed that and
added a test for the specific syntax error.
Bug fix candidate.
As mentioned on python-dev, reverting patch #1504333 because it introduced
an infinite loop in rev 47154.
This patch also adds a test to prevent the regression.
- gbk and gb18030 codec now handle U+30FB KATAKANA MIDDLE DOT correctly.
- iso2022_jp_2 codec now encodes into G0 for KS X 1001, GB2312
codepoints to conform the standard.
- iso2022_jp_3 and iso2022_jp_2004 codec can encode JIS X 2013:2
codepoints now.
generator expressions (x for x, in ... ) works again.
Sigh, I only fixed for loops the first time, not list comps and genexprs too.
I couldn't find any more unpacking cases where there is a similar bug lurking.
This code should be refactored to eliminate the duplication. I'm sure
the listcomp/genexpr code can be refactored. I'm not sure if the for loop
can re-use any of the same code though.
Will backport to 2.5 (the only place it matters).
Debian sparc buildbots. Since this goes through a lot of tests
and hits the disk a lot it could be slow (especially if NFS is involved).
I'm not sure if that's the problem, but printing periodic msgs shouldn't hurt.
The code was stolen from test_compiler.
OverflowError while x*x succeeds and produces infinity; apparently
these inconsistencies cannot be fixed across ``all'' platforms and
there's a widespread feeling that therefore ``every'' platform
should keep suffering forevermore. Ah well.
Small: Always generate a NL or NEWLINE token following
a COMMENT token. The old code did not generate an NL token if
the comment was on a line by itself.
Large: The output of untokenize() will now match the
input exactly if it is passed the full token sequence. The
old, crufty output is still generated if a limited input
sequence is provided, where limited means that it does not
include position information for tokens.
Remaining bug: There is no CONTINUATION token (\) so there is no way
for untokenize() to handle such code.
Also, expanded the number of doctests in hopes of eventually removing
the old-style tests that compare against a golden file.
Bug fix candidate for Python 2.5.1. (Sigh.)
inf) but didn't; added a test to test_float to verify that, and ignored the
ERANGE value for errno in the pow operation to make the new test pass (with
help from Marilyn Davis at the Google Python Sprint -- thanks!).
of the Python part of a callback function to C. If it cannot be
converted, call PyErr_WriteUnraisable with the exception we got.
Before, arbitrary data has been passed to the calling C code in this
case.
(I'm not really sure the NEWS entry is understandable, but I cannot
find better words)
before raising SystemExit, allowing IDLE to honor quit() and exit().
M Lib/site.py
M Lib/idlelib/PyShell.py
M Lib/idlelib/CREDITS.txt
M Lib/idlelib/NEWS.txt
M Misc/NEWS
sporadically on other platforms. This is really a band-aid that doesn't
fix the underlying issue in SocketServer. It's not clear if it's worth
it to fix SocketServer, however, I opened a bug to track it:
http://python.org/sf/1540386
ctypes instances no longer have the internal and undocumented
'_as_parameter_' attribute which was used to adapt them to foreign
function calls; this mechanism is replaced by a function pointer in
the type's stgdict.
In the 'from_param' class methods, try the _as_parameter_ attribute if
other conversions are not possible.
This makes the documented _as_parameter_ mechanism work as intended.
Change the ctypes version number to 1.0.1.
Replace UnicodeDecodeErrors raised during == and !=
compares of Unicode and other objects with a new
UnicodeWarning.
All other comparisons continue to raise exceptions.
Exceptions other than UnicodeDecodeErrors are also left
untouched.
were failing due to inappropriate clipping of numbers larger than 2**31
with new-style classes. (typeobject.c) In reviewing the code for classic
classes, there were 2 problems. Any negative value return could be returned.
Always return -1 if there was an error. Also make the checks similar
with the new-style classes. I believe this is correct for 32 and 64 bit
boxes, including Windows64.
Add a test of classic classes too.
I modified this patch some by fixing style, some error checking, and adding
XXX comments. This patch requires review and some changes are to be expected.
I'm checking in now to get the greatest possible review and establish a
baseline for moving forward. I don't want this to hold up release if possible.
protected by "if verbose:", which caused the test to fail on
all non-Windows boxes.
Note that I deliberately didn't convert this to unittest yet,
because I expect it would be even harder to debug this on Tru64
after conversion.
appears to be utterly insane. Plug some theoretical
insecurities in the test script:
- Verify that the SIGALRM handler was actually installed.
- Don't call alarm() before the handler is installed.
- Move everything that can fail inside the try/finally,
so the test cleans up after itself more often.
- Try sending all the expected signals in
force_test_exit(), not just SIGALRM. Since that was
fixed to actually send SIGALRM (instead of invisibly
dying with an AttributeError), we've seen that sending
SIGALRM alone does not stop this from hanging.
- Move the "kill the child" business into the finally
clause, so the child doesn't survive test failure
to send SIGALRM to other tests later (there are also
baffling SIGALRM-related failures in test_socket).
- Cancel the alarm in the finally clause -- if the
test dies early, we again don't want SIGALRM showing
up to confuse a later test.
Alas, this still relies on timing luck wrt the spawned
script that sends the test signals, but it's hard to see
how waiting for seconds can so often be so unlucky.
test_threadedsignals: curiously, this test never fails
on Tru64, but doesn't normally signal SIGALRM. Anyway,
fixed an obvious (but probably inconsequential) logic
error.
The first hunk changes the colon to an ! like other Windows variants.
We need to always wait on the child so the lock gets released and
no other tests fail. This is the try/finally in the second hunk.
at stopping test_signal from hanging forever on the Tru64
buildbot. That could be because there's no such thing as
signal.SIGALARM. Changed to the idiotic (but standard)
signal.SIGALRM instead, and added some more debug output.
64-bit boxes. I have no idea what the ctypes docs mean
by "integers", and blind-guessing here that it intended to
mean the signed C "int" type, in which case perhaps I can
repair this by feeding the thread id argument to type
ctypes.c_long().
Also made the worker thread daemonic, so it doesn't hang
Python shutdown if the test continues to fail.
of quoted test data relied on preserving a single trailing
blank. Changed the string from raw to regular, and forced
in the trailing blank via an explicit \x20 escape.
PyThreadState_SetAsyncExc(): internal correctness changes wrt
refcount safety and deadlock avoidance. Also added a basic test
case (relying on ctypes) and repaired the docs.
directories each time it ran, at least on Windows.
Several changes: explicitly closed all files; wrapped long
lines; stopped suppressing errors when removing a file or
directory fails (removing /shouldn't/ fail!); and changed
what appeared to be incorrect usage of os.removedirs() (that
doesn't remove empty directories at and /under/ the given
path, instead it must be given an empty leaf directory and
then deletes empty directories moving /up/ the path -- could
be that the conceptually simpler shutil.rmtree() was really
actually intended here).
In the 2.5 development cycle, MAKE_CLOSURE as changed to take free
variables as a tuple rather than as individual items on the stack.
Closes patch #1534084.
on each iteration. I'm not positive this is the best way to handle
this. I'm also not sure that there aren't other cases where
the lnotab is generated incorrectly. It would be great if people
that use pdb or tracing could test heavily.
Also:
* Remove dead/duplicated code that wasn't used/necessary
because we already handled the docstring prior to entering the loop.
* add some debugging code into the compiler (#if 0'd out).
writing the crc to file on the "PPC64 Debian trunk" buildbot
when running test_tarfile.
This is again a case where the native zlib crc is an unsigned
32-bit int, but the Python wrapper implicitly casts it to
signed C long, so that "the sign bit looks different" on
different platforms.
buildbot (& possibly other 64-bit boxes) during test_gzip.
The native zlib crc32 function returns an unsigned 32-bit integer,
which the Python wrapper implicitly casts to C long. Therefore the
same crc can "look negative" on a 32-bit box but "look positive" on
a 64-bit box. This patch papers over that platform difference when
writing the crc to file.
It may be better to change the Python wrapper, either to make
the result "look positive" on all platforms (which means it may
have to return a Python long at times on a 32-bit box), or to
keep the sign the same across boxes. But that would be a visible
change in what users see, while the current hack changes no
visible behavior (well, apart from stopping the struct deprecation
warning).
Note that the module-level write32() function is no longer used.
Patch by Douglas Greiman.
The test_run_abort() testcase produces a core file on Unix systems,
even though the test is successful. This can be confusing or alarming
to someone who runs 'make test' and then finds that the Python
interpreter apparently crashed.
warning on Windows.
Afraid I can't detect a pattern to when the pack formats decide
to use a signed or unsigned format code -- appears nearly
arbitrary to my eyes. So I left all the pack formats alone and
changed the special-case data values instead.
warnings on Win32.
Also added an XXX about the line:
pos3 = self.fp.tell()
`pos3` is never referenced, and I have no idea what the code
intended to do instead.
These problems may mask more important, real problems.
One or both methods are known to fail on: Solaris, OpenBSD, Debian, Ubuntu.
They pass on Windows and some Linux boxes.
41667, 41668 - initial switch to xmlcore
47044 - mention of xmlcore in What's New
50687 - mention of xmlcore in the library reference
re-apply xmlcore changes to xml:
41674 - line ending changes (re-applied manually), directory props
41677 - add cElementTree wrapper
41678 - PSF licensing for etree
41812 - whitespace normalization
42724 - fix svn:eol-style settings
43681, 43682 - remove Python version-compatibility cruft from minidom
46773 - fix encoding of \r\n\t in attr values in saxutils
47269 - added XMLParser alias for cElementTree compatibility
additional tests were added in Lib/test/test_sax.py that failed with
the xmlcore changes; these relate to SF bugs #1511497, #1513611
with PEP 302. This was fixed by adding an ``imp.NullImporter`` type that is
used in ``sys.path_importer_cache`` to cache non-directory paths and avoid
excessive filesystem operations during imports.
concept, and that different ways of trying to find "the
hardware address" may return different results. Certainly
true on both of my Windows boxes, and in different ways
(see whining on python-dev).
inspect.py, and pydoc.py. Specifically, this allows for querying the type of
an object against these built-in C types and more importantly, for getting
their docstrings printed in the interactive interpreter's help() function.
This patch includes a new built-in module called _types which provides
definitions of getset and member descriptors for use by the types.py module.
These types are exposed as types.GetSetDescriptorType and
types.MemberDescriptorType. Query functions are provided as
inspect.isgetsetdescriptor() and inspect.ismemberdescriptor(). The
implementations of these are robust enough to work with Python implementations
other than CPython, which may not have these fundamental types.
The patch also includes documentation and test suite updates.
I commit these changes now under these guiding principles:
1. Silence is assent. The release manager has not said "no", and of the few
people that cared enough to respond to the thread, the worst vote was "0".
2. It's easier to ask for forgiveness than permission.
3. It's so dang easy to revert stuff in svn, that you could view this as a
forcing function. :)
Windows build patches will follow.
When a node number disagrees, keep track of all sources & the
node numbers they reported, and stick all that in the error message.
Changed all callers to supply a non-empty "source" argument; made
the "source" argument non-optional.
On my box, test_uuid still fails, but with the less confusing output:
AssertionError: different sources disagree on node:
from source 'getnode1', node was 00038a000015
from source 'getnode2', node was 00038a000015
from source 'ipconfig', node was 001111b2b7bf
Only the last one appears to be correct; e.g.,
C:\Code\python\PCbuild>getmac
Physical Address Transport Name
=================== ==========================================================
00-11-11-B2-B7-BF \Device\Tcpip_{190FB163-5AFD-4483-86A1-2FE16AC61FF1}
62-A1-AC-6C-FD-BE \Device\Tcpip_{8F77DF5A-EA3D-4F1D-975E-D472CEE6438A}
E2-1F-01-C6-5D-88 \Device\Tcpip_{CD18F76B-2EF3-409F-9B8A-6481EE70A1E4}
I can't find anything on my box with MAC 00-03-8a-00-00-15, and am
not clear on where that comes from.
Fix the DllGetClassObject and DllCanUnloadNow so that they forward the
call to the comtypes.server.inprocserver module.
The latter was never documented, never used by published code, and
didn't work anyway, so I think it does not deserve a NEWS entry (but I
might be wrong).
it into email 4.0. Specifically, in Message.get_content_charset(), handle RFC
2231 headers that contain an encoding not known to Python, or a character in
the data that isn't in the charset encoding. Also forward port the
appropriate unit tests.
This adds a new key definition for OSX, which is slightly different from the
classic mac definition.
Also add NEWS item for a couple of bugfixes I added recently.
to guess /which/ line the spawned thread is in at the time
sys._current_frames() is called: we know it finished
enter_g.set(), but can't know whether the instruction
counter has advanced to the following leave_g.wait().
The latter is overwhelming most likely, but not guaranteed,
and I see that the "x86 Ubuntu dapper (icc) trunk" buildbot
found it on the other line once. Changed the test so it
passes in either case.
that a 2.93 sec audio file will always take 3.1 sec (as it did on the
hardware I had when I first wrote the test), expect that it will take
2.93 sec +/- 10%, and only fail if it's outside of that range.
Compute the expected
points out there are really two types of continued headers defined in this
RFC (i.e. "encoded" parameters with the form "name*0*=" and unencoded
parameters with the form "name*0="), but we were were handling them both the
same way and that isn't correct.
This patch should be much more RFC compliant in that only encoded params are
%-decoded and the charset/language information is only extract if there are
any encoded params in the segments. If there are no encoded params then the
RFC says that there will be no charset/language parts.
Note however that this will change the return value for Message.get_param() in
some cases. For example, whereas before if you had all unencoded param
continuations you would have still gotten a 3-tuple back from this method
(with charset and language == None), you will now get just a string. I don't
believe this is a backward incompatible change though because the
documentation for this method already indicates that either return value is
possible and that you must do an isinstance(val, tuple) check to discriminate
between the two. (Yeah that API kind of sucks but we can't change /that/
without breaking code.)
Test cases, some documentation updates, and a NEWS item accompany this patch.
Moved the code for _PyThread_CurrentFrames() up, so it's no longer
in a huge "#ifdef WITH_THREAD" block (I didn't realize it /was/ in
one).
Changed test_sys's test_current_frames() so it passes with or without
thread supported compiled in.
Note that test_sys fails when Python is compiled without threads,
but for an unrelated reason (the old test_exit() fails with an
indirect ImportError on the `thread` module). There are also
other unrelated compilation failures without threads, in extension
modules (like ctypes); at least the core compiles again.
Do we really support --without-threads? If so, there are several
problems remaining.
of values in the time tuple passed in. Unfortunately people came to rely on
undocumented behaviour of setting unneeded values to 0, regardless of if it was
within the valid range. Now those values force the value internally to the
minimum value when 0 is passed in.
Specifically, instead of raising a ValueError when there is a single tick in
the parameter, simply return that the entire string unquoted, with None for
both the charset and the language. Also, if there are more than 2 ticks in
the parameter, interpret the first three parts as the standard RFC 2231 parts,
then the rest of the parts as the encoded string.
Test cases added.
Original fewer-than-3-parts fix by Tokio Kikuchi.
Resolves SF bug # 1218081. I will back port the fix and tests to Python 2.4
(email 3.0) and Python 2.3 (email 2.5).
Also, bump the version number to email 4.0.1, removing the 'alpha' moniker.
1. 'as' highlighted as builtin in comment string on import line
2. Comments such as "#False identity" which start with a keyword immediately
after the '#' character aren't colored as comments.
3. u or U beginning unicode string not correctly highlighted
Closes bug 1325071
Georg Brandl
Neal Norwitz
Walter Dörwald
Thomas Heller
Andrew M. Kuchling
Martin v. Löwis
Tim Peters
Brett Cannon
Ronald Oussoren
Hye-Shik Chang
Armin Rigo
Jeremy Hylton
Barry Warsaw
Vinay Sajip
Kurt B. Kaiser
Jack Diederich
Nick Coghlan
Gustavo Niemeyer
Raymond Hettinger
Thomas Wouters
Alex Martelli
Anthony Baxter
Neil Schemenauer
Fredrik Lundh
Marc-André Lemburg
Ka-Ping Yee
Guido van Rossum
Andrew MacIntyre
Bob Ippolito
George Yoshida
Fred Drake
Phillip J. Eby
Gregory P. Smith
Greg Ward
Facundo Batista
Peter Astrand