64-bit boxes. I have no idea what the ctypes docs mean
by "integers", and blind-guessing here that it intended to
mean the signed C "int" type, in which case perhaps I can
repair this by feeding the thread id argument to type
ctypes.c_long().
Also made the worker thread daemonic, so it doesn't hang
Python shutdown if the test continues to fail.
of quoted test data relied on preserving a single trailing
blank. Changed the string from raw to regular, and forced
in the trailing blank via an explicit \x20 escape.
PyThreadState_SetAsyncExc(): internal correctness changes wrt
refcount safety and deadlock avoidance. Also added a basic test
case (relying on ctypes) and repaired the docs.
directories each time it ran, at least on Windows.
Several changes: explicitly closed all files; wrapped long
lines; stopped suppressing errors when removing a file or
directory fails (removing /shouldn't/ fail!); and changed
what appeared to be incorrect usage of os.removedirs() (that
doesn't remove empty directories at and /under/ the given
path, instead it must be given an empty leaf directory and
then deletes empty directories moving /up/ the path -- could
be that the conceptually simpler shutil.rmtree() was really
actually intended here).
In the 2.5 development cycle, MAKE_CLOSURE as changed to take free
variables as a tuple rather than as individual items on the stack.
Closes patch #1534084.
on each iteration. I'm not positive this is the best way to handle
this. I'm also not sure that there aren't other cases where
the lnotab is generated incorrectly. It would be great if people
that use pdb or tracing could test heavily.
Also:
* Remove dead/duplicated code that wasn't used/necessary
because we already handled the docstring prior to entering the loop.
* add some debugging code into the compiler (#if 0'd out).
Patch by Douglas Greiman.
The test_run_abort() testcase produces a core file on Unix systems,
even though the test is successful. This can be confusing or alarming
to someone who runs 'make test' and then finds that the Python
interpreter apparently crashed.
These problems may mask more important, real problems.
One or both methods are known to fail on: Solaris, OpenBSD, Debian, Ubuntu.
They pass on Windows and some Linux boxes.
41667, 41668 - initial switch to xmlcore
47044 - mention of xmlcore in What's New
50687 - mention of xmlcore in the library reference
re-apply xmlcore changes to xml:
41674 - line ending changes (re-applied manually), directory props
41677 - add cElementTree wrapper
41678 - PSF licensing for etree
41812 - whitespace normalization
42724 - fix svn:eol-style settings
43681, 43682 - remove Python version-compatibility cruft from minidom
46773 - fix encoding of \r\n\t in attr values in saxutils
47269 - added XMLParser alias for cElementTree compatibility
additional tests were added in Lib/test/test_sax.py that failed with
the xmlcore changes; these relate to SF bugs #1511497, #1513611
concept, and that different ways of trying to find "the
hardware address" may return different results. Certainly
true on both of my Windows boxes, and in different ways
(see whining on python-dev).
inspect.py, and pydoc.py. Specifically, this allows for querying the type of
an object against these built-in C types and more importantly, for getting
their docstrings printed in the interactive interpreter's help() function.
This patch includes a new built-in module called _types which provides
definitions of getset and member descriptors for use by the types.py module.
These types are exposed as types.GetSetDescriptorType and
types.MemberDescriptorType. Query functions are provided as
inspect.isgetsetdescriptor() and inspect.ismemberdescriptor(). The
implementations of these are robust enough to work with Python implementations
other than CPython, which may not have these fundamental types.
The patch also includes documentation and test suite updates.
I commit these changes now under these guiding principles:
1. Silence is assent. The release manager has not said "no", and of the few
people that cared enough to respond to the thread, the worst vote was "0".
2. It's easier to ask for forgiveness than permission.
3. It's so dang easy to revert stuff in svn, that you could view this as a
forcing function. :)
Windows build patches will follow.
When a node number disagrees, keep track of all sources & the
node numbers they reported, and stick all that in the error message.
Changed all callers to supply a non-empty "source" argument; made
the "source" argument non-optional.
On my box, test_uuid still fails, but with the less confusing output:
AssertionError: different sources disagree on node:
from source 'getnode1', node was 00038a000015
from source 'getnode2', node was 00038a000015
from source 'ipconfig', node was 001111b2b7bf
Only the last one appears to be correct; e.g.,
C:\Code\python\PCbuild>getmac
Physical Address Transport Name
=================== ==========================================================
00-11-11-B2-B7-BF \Device\Tcpip_{190FB163-5AFD-4483-86A1-2FE16AC61FF1}
62-A1-AC-6C-FD-BE \Device\Tcpip_{8F77DF5A-EA3D-4F1D-975E-D472CEE6438A}
E2-1F-01-C6-5D-88 \Device\Tcpip_{CD18F76B-2EF3-409F-9B8A-6481EE70A1E4}
I can't find anything on my box with MAC 00-03-8a-00-00-15, and am
not clear on where that comes from.
to guess /which/ line the spawned thread is in at the time
sys._current_frames() is called: we know it finished
enter_g.set(), but can't know whether the instruction
counter has advanced to the following leave_g.wait().
The latter is overwhelming most likely, but not guaranteed,
and I see that the "x86 Ubuntu dapper (icc) trunk" buildbot
found it on the other line once. Changed the test so it
passes in either case.
that a 2.93 sec audio file will always take 3.1 sec (as it did on the
hardware I had when I first wrote the test), expect that it will take
2.93 sec +/- 10%, and only fail if it's outside of that range.
Compute the expected
Moved the code for _PyThread_CurrentFrames() up, so it's no longer
in a huge "#ifdef WITH_THREAD" block (I didn't realize it /was/ in
one).
Changed test_sys's test_current_frames() so it passes with or without
thread supported compiled in.
Note that test_sys fails when Python is compiled without threads,
but for an unrelated reason (the old test_exit() fails with an
indirect ImportError on the `thread` module). There are also
other unrelated compilation failures without threads, in extension
modules (like ctypes); at least the core compiles again.
Do we really support --without-threads? If so, there are several
problems remaining.
of values in the time tuple passed in. Unfortunately people came to rely on
undocumented behaviour of setting unneeded values to 0, regardless of if it was
within the valid range. Now those values force the value internally to the
minimum value when 0 is passed in.
The hppa ubuntu box sometimes hangs forever in these tests. My guess
is that the wait is failing for some reason. Use WNOHANG, so we won't
wait until the buildbot kills the test suite.
I haven't been able to reproduce the failure, so I'm not sure if
this will help or not. Hopefully, this change will cause the test
to fail, rather than hang. That will be better since we will get
the rest of the test results. It may also help us debug the real problem.
*** The reason this originally failed was because there were many
zombie children outstanding before rev 47158 cleaned them up.
There are still hangs in test_subprocess that need to be addressed,
but that will take more work. This should close some holes.
str() or repr()) would work, just not multi-value tuples. Probably not a
backport candidate, since it changes the behaviour of passing a
single-element tuple:
>>> string.Template("$foo").substitute(dict(foo=(1,)))
'(1,)'
versus
'1'
handler would cause a segfault. This merges in Expat's lib/xmlparse.c
revisions 1.154 and 1.155, which fix this and a closely related problem
(the later does not affect Python).
Moved the crasher test to the tests for xml.parsers.expat.
be called at the end of each test that spawns children (perhaps it
should be called from regrtest instead?). This will hopefully prevent
some of the unexplained failures in the buildbots (hppa and alpha)
during tests that spawn children. The problems were not reproducible.
There were many zombies that remained at the end of several tests.
In the worst case, this shouldn't cause any more problems,
though it may not help either. Time will tell.
(modified patch by Sam Ruby; changed to use separate REs for start and end
tags to reduce matching cost for end tags; extended tests; updated to avoid
breaking previous changes to support IPv6 addresses in unquoted attribute
values)
consistent with os.wait() returning immediately because some other
subprocess had previously exited; the test suite then immediately
tries to lock the mailbox and gets an error saying it's already
locked.
To fix this, do a waitpid() so the test suite only continues once
the intended child process has exited.
('[' and ']' were not accepted in unquoted attribute values)
- cleaned up tests of character and entity reference decoding so the
tests cover the documented relationships among handle_charref,
handle_entityref, convert_charref, convert_codepoint, and
convert_entityref, without bringing up Unicode issues that sgmllib
cannot be involved in
both a subclass of Warning and a subclass of types.ClassType. The latter is no
longer true thanks to new-style exceptions.
Closes bug #1510580. Thanks to AMK for the test.
The problem of checking too eagerly for recursive calls is the
following: if a RuntimeError is caused by recursion, and if code needs
to normalize it immediately (as in the 2nd test), then
PyErr_NormalizeException() needs a call to the RuntimeError class to
instantiate it, and this hits the recursion limit again... causing
PyErr_NormalizeException() to never finish.
Moved this particular recursion check to slot_tp_call(), which is not
involved in instantiating built-in exceptions.
Backport candidate.
constructor, meaning it is treated as *args, not as a single argument. This
means using the 'message' attribute won't work (until Py3K comes around),
and so one must grab from 'arg' to get the error number.
os.environ (setting envar COLUMNS), which at least caused
test_float_default() to fail if the tests were run more than once.
This repairs the test_optparse -R failures Neal reported on
python-dev. It also explains some seemingly bizarre test_optparse
failures we saw a couple weeks ago on the buildbots, when
test_optparse failed due to test_file failing to clean up after
itself, and then test_optparse failed in an entirely different
way when regrtest's -w option ran test_optparse a second time.
It's now obvious that make_parser() permanently changing os.environ
was responsible for the second half of that.
is that the wait is failing for some reason. Use WNOHANG, so we won't
wait until the buildbot kills the test suite.
I haven't been able to reproduce the failure, so I'm not sure if
this will help or not. Hopefully, this change will cause the test
to fail, rather than hang. That will be better since we will get
the rest of the test results. It may also help us debug the real problem.
issues that crop up from time to time, but this change seems to have been
pretty stable (no spurious warnings) for about a week.
Other modules which use threads may require similar use of
threading_setup/threading_cleanup from test_support.
of this test. It probably still requires more disk space
than most buildbots have, and in any case is still so
intrusive that if we don't find another way to test this I'm
taking my buildbot offline permanently ;-)
This will hopefully get the buildbots to pass. Not sure this
test will be feasible or even work. But everything is red now,
so it can't get much worse.
arguments in reverse, the interpreter would infinitely recourse trying to get a
coercion that worked. So put in a recursion check after a coercion is made and
the next call to attempt to use the coerced values.
Fixes bug #992017 and closes crashers/coerce.py .
Heavily revised, comprising revisions:
46640 - original trunk revision (backed out in r46655)
46647 - markup fix (backed out in r46655)
46692:46918 merged from branch aimacintyre-sf1454481
branch tested on buildbots (Windows buildbots had problems
not related to these changes).
when running with -O.
test_simple_validation_error still fails under -O. That appears to be because
wsgiref's validate.py uses `assert` statements all over the place to check
arguments for sanity. That should all be changed (it's not a logical error
in the software if a user passes bogus arguments, so this isn't a reasonable
use for `assert` -- checking external preconditions should generally raise
ValueError or TypeError instead, as appropriate).
a search path setup, some of these hosts resolve to the wrong address.
By appending a period to the hostname, the hostname should only resolve
to what we want it to resolve to. Hopefully this doesn't break different bots.
Also add more info to failure message to aid debugging test failure.
a search path setup, some of these hosts resolve to the wrong address.
By appending a period to the hostname, the hostname should only resolve
to what we want it to resolve to. Hopefully this doesn't break different bots.
clean up files and directories the tests often leave behind by
mistake. This is the first time in history I don't have a bogus
"db_home" directory after running the tests ;-)
Also worked on runtest's docstring, to say something about all the
arguments, and to document the non-obvious return values.
New functions runtest_inner() and cleanup_test_droppings() in
support of the above.
run immediately after test_file. At least 8 buildbot
boxes passed since the underlying problem got fixed,
and they all failed before the fix, so there's no point
to this anymore.
test clean up after itself appears to fix the test failures
when test_optparse follows test_file.
test_main(): Get rid of TESTFN no matter what. That's
also enough to fix the mystery failures. Doesn't hurt
to fix them twice :-)
Since test_file is implicated in mysterious test failures
when followed by test_optparse, if I had any brains I'd
look at the checkin that last changed test_file ;-)
the char buffer was requested. Now it actually returns the char buffer if
available or raises a TypeError if it isn't (as is raised for the other buffer
types if they are not present but requested).
Not a backport candidate since it does change semantics of the buffer object
(although it could be argued this is enough of a bug to bother backporting).
Give a consistent behavior for comparison and hashing of method objects
(both user- and built-in methods). Now compares the 'self' recursively.
The hash was already asking for the hash of 'self'.
from ?iga Seilnacht (sorry about the name, but Firefox
on my box can't display the first character of the name --
the SF "Unix name" is zseil).
This appears to cure the oddball intermittent leaks across
runs when running test_exceptions under -R. I'm not sure
why, but I'm too sleepy to care ;-)
The thrust of the SF patch was to remove randomness in the
pickle protocol used. I changed the patch to use
range(pickle.HIGHEST_PROTOCOL + 1), to try both pickle and
cPickle, and randomly mucked with other test lines to put
statements on their own lines.
Not a bugfix candidate (this is fiddling new-in-2.5 code).
Found them using::
find . -name '*.py' | while read i ; do grep 'def[^(]*( ' $i /dev/null ; done
find . -name '*.py' | while read i ; do grep ' ):' $i /dev/null ; done
(I was doing this all over my own code anyway, because I'd been using spaces in
all defs, so I thought I'd make a run on the Python code as well. If you need
to do such fixes in your own code, you can use xx-rename or parenregu.el within
emacs.)
string_reverse(): Simplify.
assertRaises(): Raise TestFailed on failure.
test_unpack_from(), test_pack_into(), test_pack_into_fn(): never
use `assert` to test for an expected result (it doesn't test anything
when Python is run with -O).
Move the long-winded, multiply-nested -R support out
of runtest() and into some module-level helper functions.
This makes runtest() and the -R code easier to follow.
That in turn allowed seeing some opportunities for code
simplification, and made it obvious that reglog.txt
never got closed.
46640 Patch #1454481: Make thread stack size runtime tunable.
46647 Markup fix
The first is causing many buildbots to fail test runs, and there
are multiple causes with seemingly no immediate prospects for
repairing them. See python-dev discussion.
Note that a branch can (and should) be created for resolving these
problems, like
svn copy svn+ssh://svn.python.org/python/trunk -r46640 svn+ssh://svn.python.org/python/branches/NEW_BRANCH
followed by merging rev 46647 to the new branch.
- Following Guido's comments, renamed
* pack_to -> pack_into
* recv_buf -> recv_into
* recvfrom_buf -> recvfrom_into
- Made fixes to _struct.c according to Neal Norwitz comments on the checkins
list.
- Converted some ints into the appropriate -- I hope -- ssize_t and size_t.
the output required more than one line. "Small" dicts got
displayed in seemingly random order (the hash-induced order
produced by dict.__repr__). None of this was documented.
Now pprint functions always sort dicts by key, and the docs
promise it.
This was proposed and agreed to during the PyCon 2006 core
sprint -- I just didn't have time for it before now.
but disabled then because str and unicode strings gave different
results. The implementations were repaired later during the
sprint, but the new test remained disabled.
Tim Peters
Guido van Rossum
Armin Rigo
Martin v. Löwis
Thomas Heller
Andrew MacIntyre
Georg Brandl
Bob Ippolito
Neil Schemenauer
Neal Norwitz
Andrew M. Kuchling
Fred Drake
Barry Warsaw
Brett Cannon
Greg Ward
Phillip J. Eby
Peter Astrand
Hye-Shik Chang
Nick Coghlan
Thomas Wouters
Vinay Sajip
Walter Dörwald
Ronald Oussoren
Ka-Ping Yee
Martin Blais
Gregory P. Smith
Fredrik Lundh