The address tuple for CAN_RAW no longer returns the address family
after the introduction of CAN ISO-TP support in a30f6d45ac. However,
updating test_socket.CANTest.testSendFrame was missed as part of the
change, so the test incorrectly attempts to index past the last tuple
item to retrieve the address family.
This removes the now-redundant check for equality against socket.AF_CAN,
as the tuple will not contain the address family.
add:
* `_simple_enum` decorator to transform a normal class into an enum
* `_test_simple_enum` function to compare
* `_old_convert_` to enable checking `_convert_` generated enums
`_simple_enum` takes a normal class and converts it into an enum:
@simple_enum(Enum)
class Color:
RED = 1
GREEN = 2
BLUE = 3
`_old_convert_` works much like` _convert_` does, using the original logic:
# in a test file
import socket, enum
CheckedAddressFamily = enum._old_convert_(
enum.IntEnum, 'AddressFamily', 'socket',
lambda C: C.isupper() and C.startswith('AF_'),
source=_socket,
)
`_test_simple_enum` takes a traditional enum and a simple enum and
compares the two:
# in the REPL or the same module as Color
class CheckedColor(Enum):
RED = 1
GREEN = 2
BLUE = 3
_test_simple_enum(CheckedColor, Color)
_test_simple_enum(CheckedAddressFamily, socket.AddressFamily)
Any important differences will raise a TypeError
add:
_simple_enum decorator to transform a normal class into an enum
_test_simple_enum function to compare
_old_convert_ to enable checking _convert_ generated enums
_simple_enum takes a normal class and converts it into an enum:
@simple_enum(Enum)
class Color:
RED = 1
GREEN = 2
BLUE = 3
_old_convert_ works much like _convert_ does, using the original logic:
# in a test file
import socket, enum
CheckedAddressFamily = enum._old_convert_(
enum.IntEnum, 'AddressFamily', 'socket',
lambda C: C.isupper() and C.startswith('AF_'),
source=_socket,
)
test_simple_enum takes a traditional enum and a simple enum and
compares the two:
# in the REPL or the same module as Color
class CheckedColor(Enum):
RED = 1
GREEN = 2
BLUE = 3
_test_simple_enum(CheckedColor, Color)
_test_simple_enum(CheckedAddressFamily, socket.AddressFamily)
Any important differences will raise a TypeError
* Enum: streamline repr() and str(); improve docs
- repr() is now ``enum_class.member_name``
- stdlib global enums are ``module_name.member_name``
- str() is now ``member_name``
- add HOW-TO section for ``Enum``
- change main documentation to be an API reference
* Move socket related functions from test.support to socket_helper.
* Import socket, nntplib and urllib.error lazily in transient_internet().
* Remove importing multiprocess.
Running `test_socket` or anything that depends on it (like python -m
test.pythoninfo) crashes if IOCTL_VM_SOCKETS_GET_LOCAL_CID does not
exist in the socket module.
Automerge-Triggered-By: @pablogsal
The socket module now has the socket.send_fds() and socket.recv.fds() functions.
Contributed by Joannah Nanjekye, Shinya Okano (original patch)
and Victor Stinner.
Co-Authored-By: Victor Stinner <vstinner@redhat.com>
Support for RFCOMM, L2CAP, HCI, SCO is based on the BTPROTO_* macros
being defined. Winsock only supports RFCOMM, even though it has a
BTHPROTO_L2CAP macro. L2CAP support would build on windows, but not
necessarily work.
This also adds some basic unittests for constants (all of which existed
prior to this commit, just not on windows) and creating sockets.
pair: Nate Duarte <slacknate@gmail.com>
Expose the CAN_BCM SocketCAN constants used in the bcm_msg_head struct
flags (provided by <linux/can/bcm.h>) under the socket library.
This adds the following constants with a CAN_BCM prefix:
* SETTIMER
* STARTTIMER
* TX_COUNTEVT
* TX_ANNOUNCE
* TX_CP_CAN_ID
* RX_FILTER_ID
* RX_CHECK_DLC
* RX_NO_AUTOTIMER
* RX_ANNOUNCE_RESUME
* TX_RESET_MULTI_IDX
* RX_RTR_FRAME
* CAN_FD_FRAME
The CAN_FD_FRAME flag was introduced in the 4.8 kernel, while the other
ones were present since SocketCAN drivers were mainlined in 2.6.25. As
such, it is probably unnecessary to guard against these constants being
missing.
At the moment you can definitely use UDPLITE sockets on Linux systems, but it would be good if this support were formalized such that you can detect support at runtime easily.
At the moment, to make and use a UDPLITE socket requires something like the following code:
```
>>> import socket
>>> a = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, 136)
>>> b = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, 136)
>>> a.bind(('localhost', 44444))
>>> b.sendto(b'test'*256, ('localhost', 44444))
>>> b.setsockopt(136, 10, 16)
>>> b.sendto(b'test'*256, ('localhost', 44444))
>>> b.setsockopt(136, 10, 32)
>>> b.sendto(b'test'*256, ('localhost', 44444))
>>> b.setsockopt(136, 10, 64)
>>> b.sendto(b'test'*256, ('localhost', 44444))
```
If you look at this through Wireshark, you can see that the packets are different in that the checksums and checksum coverages change.
With the pull request that I am submitting momentarily, you could do the following code instead:
```
>>> import socket
>>> a = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDPLITE)
>>> b = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDPLITE)
>>> a.bind(('localhost', 44444))
>>> b.sendto(b'test'*256, ('localhost', 44444))
>>> b.set_send_checksum_coverage(16)
>>> b.sendto(b'test'*256, ('localhost', 44444))
>>> b.set_send_checksum_coverage(32)
>>> b.sendto(b'test'*256, ('localhost', 44444))
>>> b.set_send_checksum_coverage(64)
>>> b.sendto(b'test'*256, ('localhost', 44444))
```
One can also detect support for UDPLITE just by checking
```
>>> hasattr(socket, 'IPPROTO_UDPLITE')
```
https://bugs.python.org/issue37345
* use platform.system() as runtime test, rather than sys.platform() build-time test
* IPv6 zone id support on AIX is limited to inet_pton6_zone(), so skip related
getaddrinfo() and getnameinfo() tests as not supported
The length check for AF_ALG salg_name and salg_type had a off-by-one
error. The code assumed that both values are not necessarily NULL
terminated. However the Kernel code for alg_bind() ensures that the last
byte of both strings are NULL terminated.
Signed-off-by: Christian Heimes <christian@python.org>
* Replace testInheritFlags() with two tests:
testInheritFlagsBlocking() and testInheritFlagsTimeout()
to test different default socket timeout. Moreover, the test now
checks sock.gettimeout() rather than a functional test on recv().
* Replace time.time() with time.monotonic()
* Add socket_setdefaulttimeout() context manager to restore the
default timeout when the test completes.
* Remove testConnect(): accept() wasn't blocking and testAccept()
already tests non-blocking accept().
* Remove accept() functional test from testInitNonBlocking():
already tested by testAccept()
* Rewrite testSetBlocking() with a new assert_sock_timeout() method
* Use addCleanup() and context manager to close sockets
* Replace assertTrue(x < y) with assertLess(x, y)
testAccept() and testRecv() of test_socket.NonBlockingTCPTests have a
race condition: time.sleep() is used as a weak synchronization
primitive and the tests fail randomly on slow buildbots.
Use a reliable threading.Event to fix these tests.
Other changes:
* Replace send() with sendall()
* Expect specific BlockingIOError rather than generic OSError
* Add a timeout to select() in testAccept() and testRecv()
* Use addCleanup() to close sockets
* Use assertRaises()
After some failures in AMD64 FreeBSD CURRENT Debug 3.x buildbots
regarding tests in test_socket that are using
testFDPassSeparateMinSpace(), FreeBDS revision 337423 was pointed
out to be the reason the test started to fail.
A close examination of the manpage for cmsg_space(3) reveals that
the number of file descriptors needs to be taken into account when
using CMSG_LEN().
This commit fixes tests in test_socket to use correctly CMSG_LEN, taking
into account the number of FDs.
The test tries to fill the receiver's socket buffer and expects an
error. But the RDS protocol doesn't require that. Moreover, the Linux
implementation of RDS expects that the producer of the messages
reduces its rate, it's not the role of the receiver to trigger an
error.
The test fails on Fedora 28 by design, so remove it.
* Add support.MS_WINDOWS: True if Python is running on Microsoft Windows.
* Add support.MACOS: True if Python is running on Apple macOS.
* Replace support.is_android with support.ANDROID
* Replace support.is_jython with support.JYTHON
* Cleanup code to initialize unix_shell
Serhiy Storchaka
Shane Harvey
karl ding
Inada Naoki
Ethan Furman
Erlend Egeberg Aasland
pxinwr
Christian Heimes
Akashkumar D Khunt
Hai Shi
Pablo Galindo
Victor Stinner
bggardner
Joannah Nanjekye
Greg Bowser
Paul Monson
Zackery Spytz
Gabe Appleton
xdegaye
Victor Stinner
Giampaolo Rodola
Michael Felt
Dima Tisnek
Bjorn Andersson
Sergey Fedoseev