add:
* `_simple_enum` decorator to transform a normal class into an enum
* `_test_simple_enum` function to compare
* `_old_convert_` to enable checking `_convert_` generated enums
`_simple_enum` takes a normal class and converts it into an enum:
@simple_enum(Enum)
class Color:
RED = 1
GREEN = 2
BLUE = 3
`_old_convert_` works much like` _convert_` does, using the original logic:
# in a test file
import socket, enum
CheckedAddressFamily = enum._old_convert_(
enum.IntEnum, 'AddressFamily', 'socket',
lambda C: C.isupper() and C.startswith('AF_'),
source=_socket,
)
`_test_simple_enum` takes a traditional enum and a simple enum and
compares the two:
# in the REPL or the same module as Color
class CheckedColor(Enum):
RED = 1
GREEN = 2
BLUE = 3
_test_simple_enum(CheckedColor, Color)
_test_simple_enum(CheckedAddressFamily, socket.AddressFamily)
Any important differences will raise a TypeError
add:
_simple_enum decorator to transform a normal class into an enum
_test_simple_enum function to compare
_old_convert_ to enable checking _convert_ generated enums
_simple_enum takes a normal class and converts it into an enum:
@simple_enum(Enum)
class Color:
RED = 1
GREEN = 2
BLUE = 3
_old_convert_ works much like _convert_ does, using the original logic:
# in a test file
import socket, enum
CheckedAddressFamily = enum._old_convert_(
enum.IntEnum, 'AddressFamily', 'socket',
lambda C: C.isupper() and C.startswith('AF_'),
source=_socket,
)
test_simple_enum takes a traditional enum and a simple enum and
compares the two:
# in the REPL or the same module as Color
class CheckedColor(Enum):
RED = 1
GREEN = 2
BLUE = 3
_test_simple_enum(CheckedColor, Color)
_test_simple_enum(CheckedAddressFamily, socket.AddressFamily)
Any important differences will raise a TypeError
Many servers in the cloud environment require SNI to be used during the
SSL/TLS handshake, therefore it is not possible to fetch their certificates
using the ssl.get_server_certificate interface.
This change adds an additional optional hostname argument that can be used to
set the SNI. Note that it is intentionally a separate argument instead of
using the host part of the addr tuple, because one might want to explicitly
fetch the default certificate or fetch a certificate from a specific IP
address with the specified SNI hostname. A separate argument also works better
for backwards compatibility.
Automerge-Triggered-By: GH:tiran
- Remove HAVE_X509_VERIFY_PARAM_SET1_HOST check
- Update hashopenssl to require OpenSSL 1.1.1
- multissltests only OpenSSL > 1.1.0
- ALPN is always supported
- SNI is always supported
- Remove deprecated NPN code. Python wrappers are no-op.
- ECDH is always supported
- Remove OPENSSL_VERSION_1_1 macro
- Remove locking callbacks
- Drop PY_OPENSSL_1_1_API macro
- Drop HAVE_SSL_CTX_CLEAR_OPTIONS macro
- SSL_CTRL_GET_MAX_PROTO_VERSION is always defined now
- security level is always available now
- get_num_tickets is available with TLS 1.3
- X509_V_ERR MISMATCH is always available now
- Always set SSL_MODE_RELEASE_BUFFERS
- X509_V_FLAG_TRUSTED_FIRST is always available
- get_ciphers is always supported
- SSL_CTX_set_keylog_callback is always available
- Update Modules/Setup with static link example
- Mention PEP in whatsnew
- Drop 1.0.2 and 1.1.0 from GHA tests
ssl.match_hostname() no longer accepts IPv4 addresses with additional text
after the address and only quad-dotted notation without trailing
whitespaces. Some inet_aton() implementations ignore whitespace and all data
after whitespace, e.g. '127.0.0.1 whatever'.
Short notations like '127.1' for '127.0.0.1' were already filtered out.
The bug was initially found by Dominik Czarnota and reported by Paul Kehrer.
Signed-off-by: Christian Heimes <christian@python.org>
https://bugs.python.org/issue37463
The ssl module now can dump key material to a keylog file and trace TLS
protocol messages with a tracing callback. The default and stdlib
contexts also support SSLKEYLOGFILE env var.
The msg_callback and related enums are private members. The feature
is designed for internal debugging and not for end users.
Signed-off-by: Christian Heimes <christian@python.org>
Instead of maintaining the same doc string two times, let's copy common
doc strings from SSLObject methods and properties to SSLSocket.
Signed-off-by: Christian Heimes <christian@python.org>
Add SSLContext.post_handshake_auth and
SSLSocket.verify_client_post_handshake for TLS 1.3 post-handshake
authentication.
Signed-off-by: Christian Heimes <christian@python.org>q
https://bugs.python.org/issue34670
Commit 141c5e8c re-added match_hostname() call. The resurrection of the
function call was never intended and was solely a merge mistake.
Signed-off-by: Christian Heimes <christian@python.org>
OpenSSL 1.1 has introduced a new API to set the minimum and maximum
supported protocol version. The API is easier to use than the old
OP_NO_TLS1 option flags, too.
Since OpenSSL has no call to set minimum version to highest supported,
the implementation emulate maximum_version = MINIMUM_SUPPORTED and
minimum_version = MAXIMUM_SUPPORTED by figuring out the minumum and
maximum supported version at compile time.
Signed-off-by: Christian Heimes <christian@python.org>
Direct instantiation of SSLSocket and SSLObject objects is now prohibited.
The constructors were never documented, tested, or designed as public
constructors. The SSLSocket constructor had limitations. For example it was
not possible to enabled hostname verification except was
ssl_version=PROTOCOL_TLS_CLIENT with cert_reqs=CERT_REQUIRED.
SSLContext.wrap_socket() and SSLContext.wrap_bio are the recommended API
to construct SSLSocket and SSLObject instances. ssl.wrap_socket() is
also deprecated.
The only test case for direct instantiation was added a couple of days
ago for IDNA testing.
Signed-off-by: Christian Heimes <christian@python.org>
* The SSLSocket is no longer implemented on top of SSLObject to
avoid an extra level of indirection.
* Owner and session are now handled in the internal constructor.
* _ssl._SSLSocket now uses the same method names as SSLSocket and
SSLObject.
* Channel binding type check is now handled in C code. Channel binding
is always available.
The patch also changes the signature of SSLObject.__init__(). In my
opinion it's fine. A SSLObject is not a user-constructable object.
SSLContext.wrap_bio() is the only valid factory.
ssl.match_hostname() has been simplified and no longer depends on re and
ipaddress module for wildcard and IP addresses. Error reporting for invalid
wildcards has been improved.
Signed-off-by: Christian Heimes <christian@python.org>
Previously, the ssl module stored international domain names (IDNs)
as U-labels. This is problematic for a number of reasons -- for
example, it made it impossible for users to use a different version
of IDNA than the one built into Python.
After this change, we always convert to A-labels as soon as possible,
and use them for all internal processing. In particular, server_hostname
attribute is now an A-label, and on the server side there's a new
sni_callback that receives the SNI servername as an A-label rather than
a U-label.
Until now Python used a hard coded white list of default TLS cipher
suites. The old approach has multiple downsides. OpenSSL's default
selection was completely overruled. Python did neither benefit from new
cipher suites (ChaCha20, TLS 1.3 suites) nor blacklisted cipher suites.
For example we used to re-enable 3DES.
Python now defaults to OpenSSL DEFAULT cipher suite selection and black
lists all unwanted ciphers. Downstream vendors can override the default
cipher list with --with-ssl-default-suites.
Signed-off-by: Christian Heimes <christian@python.org>
bpo-31399: Let OpenSSL verify hostname and IP
The ssl module now uses OpenSSL's X509_VERIFY_PARAM_set1_host() and
X509_VERIFY_PARAM_set1_ip() API to verify hostname and IP addresses.
* Remove match_hostname calls
* Check for libssl with set1_host, libssl must provide X509_VERIFY_PARAM_set1_host()
* Add documentation for OpenSSL 1.0.2 requirement
* Don't support OpenSSL special mode with a leading dot, e.g. ".example.org" matches "www.example.org". It's not standard conform.
* Add hostname_checks_common_name
Signed-off-by: Christian Heimes <christian@python.org>
DER_cert_to_PEM_cert() used textwrap.fill() to format PEM.
But it's library to wrap lines on word boundary, while PEM is
base64 encoded string.
Additionally, importing textwrap is little slow.
SSLSocket.wrap_bio() and SSLSocket.wrap_socket() hard-code SSLObject and
SSLSocket as return types. In the light of future deprecation of
ssl.wrap_socket() module function and direct instantiation of SSLSocket,
it is desirable to make the return type of SSLSocket.wrap_bio() and
SSLSocket.wrap_socket() customizable.
Signed-off-by: Christian Heimes <christian@python.org>
The SSL module now raises SSLCertVerificationError when OpenSSL fails to
verify the peer's certificate. The exception contains more information about
the error.
Original patch by Chi Hsuan Yen
Signed-off-by: Christian Heimes <christian@python.org>
* bpo-29136: Add TLS 1.3 support
TLS 1.3 introduces a new, distinct set of cipher suites. The TLS 1.3
cipher suites don't overlap with cipher suites from TLS 1.2 and earlier.
Since Python sets its own set of permitted ciphers, TLS 1.3 handshake
will fail as soon as OpenSSL 1.1.1 is released. Let's enable the common
AES-GCM and ChaCha20 suites.
Additionally the flag OP_NO_TLSv1_3 is added. It defaults to 0 (no op) with
OpenSSL prior to 1.1.1. This allows applications to opt-out from TLS 1.3
now.
Signed-off-by: Christian Heimes <christian@python.org>
* bpo-27340: Use memoryview in SSLSocket.sendall()
SSLSocket.sendall() now uses memoryview to create slices of data. This fix
support for all bytes-like object. It is also more efficient and avoids
costly copies.
Signed-off-by: Christian Heimes <christian@python.org>
* Cast view to bytes, fix typo
Signed-off-by: Christian Heimes <christian@python.org>
The deprecation include manual creation of SSLSocket and certfile/keyfile
(or similar) in ftplib, httplib, imaplib, smtplib, poplib and urllib.
ssl.wrap_socket() is not marked as deprecated yet.
The options OP_NO_COMPRESSION, OP_CIPHER_SERVER_PREFERENCE, OP_SINGLE_DH_USE, OP_SINGLE_ECDH_USE, OP_NO_SSLv2 (except for PROTOCOL_SSLv2), and OP_NO_SSLv3 (except for PROTOCOL_SSLv3) are set by default. The initial cipher suite list contains only HIGH ciphers, no NULL ciphers and MD5 ciphers (except for PROTOCOL_SSLv2).
Binbin
Christian Heimes
Jürgen Gmach
Zackery Spytz
Ethan Furman
juhovh
Victor Stinner
Xtreak
Serhiy Storchaka
Matt Eaton
orlnub123
Mads Jensen
Mandeep Singh
INADA Naoki
Steve Dower
Martin Panter