- drop TargetScopeError in favour of raising SyntaxError directly
as per the updated PEP 572
- comprehension iteration variables are explicitly local, but
named expression targets in comprehensions are nonlocal or
global. Raise SyntaxError as specified in PEP 572
- named expression targets in the outermost iterable of a
comprehension have an ambiguous target scope. Avoid resolving
that question now by raising SyntaxError. PEP 572
originally required this only for cases where the bound name
conflicts with the iteration variable in the comprehension,
but CPython can't easily restrict the exception to that case
(as it doesn't know the target variable names when visiting
the outermost iterator expression)
PyConfig_Read() is now responsible to handle early calls to
PySys_AddXOption() and PySys_AddWarnOption().
Options added by PySys_AddXOption() are now handled the same way than
PyConfig.xoptions and command line -X options.
For example, PySys_AddXOption(L"faulthandler") enables faulthandler
as expected.
bpo-37834: Normalise handling of reparse points on Windows
* ntpath.realpath() and nt.stat() will traverse all supported reparse points (previously was mixed)
* nt.lstat() will let the OS traverse reparse points that are not name surrogates (previously would not traverse any reparse point)
* nt.[l]stat() will only set S_IFLNK for symlinks (previous behaviour)
* nt.readlink() will read destinations for symlinks and junction points only
bpo-1311: os.path.exists('nul') now returns True on Windows
* nt.stat('nul').st_mode is now S_IFCHR (previously was an error)
There are plenty of legitimate scripts in the tree that begin with a
`#!`, but also a few that seem to be marked executable by mistake.
Found them with this command -- it gets executable files known to Git,
filters to the ones that don't start with a `#!`, and then unmarks
them as executable:
$ git ls-files --stage \
| perl -lane 'print $F[3] if (!/^100644/)' \
| while read f; do
head -c2 "$f" | grep -qxF '#!' \
|| chmod a-x "$f"; \
done
Looking at the list by hand confirms that we didn't sweep up any
files that should have the executable bit after all. In particular
* The `.psd` files are images from Photoshop.
* The `.bat` files sure look like things that can be run.
But we have lots of other `.bat` files, and they don't have
this bit set, so it must not be needed for them.
Automerge-Triggered-By: @benjaminp
The fact that keyword names are strings is now part of the vectorcall and `METH_FASTCALL` protocols. The biggest concrete change is that `_PyStack_UnpackDict` now checks that and raises `TypeError` if not.
CC @markshannon @vstinner
https://bugs.python.org/issue37540
sys._base_executable is now always defined on all platforms, and can be overridden through configuration.
Also adds test.support.PythonSymlink to encapsulate platform-specific logic for symlinking sys.executable
Python now gets the absolute path of the script filename specified on
the command line (ex: "python3 script.py"): the __file__ attribute of
the __main__ module, sys.argv[0] and sys.path[0] become an absolute
path, rather than a relative path.
* Add _Py_isabs() and _Py_abspath() functions.
* _PyConfig_Read() now tries to get the absolute path of
run_filename, but keeps the relative path if _Py_abspath() fails.
* Reimplement os._getfullpathname() using _Py_abspath().
* Use _Py_isabs() in getpath.c.
Remove sys.getcheckinterval() and sys.setcheckinterval() functions.
They were deprecated since Python 3.2. Use sys.getswitchinterval()
and sys.setswitchinterval() instead.
Remove also check_interval field of the PyInterpreterState structure.
* Rename PyImport_Cleanup() to _PyImport_Cleanup() and move it to the
internal C API. Add 'tstate' parameters.
* Remove documentation of _PyImport_Init(), PyImport_Cleanup(),
_PyImport_Fini(). All three were documented as "For internal use
only.".
* Add 'tstate' parameter to many internal import.c functions.
* _PyImportZip_Init() now gets 'tstate' parameter rather than
'interp'.
* Add 'interp' parameter to _PyState_ClearModules() and rename it
to _PyInterpreterState_ClearModules().
* Move private _PyImport_FindBuiltin() to the internal C API; add
'tstate' parameter to it.
* Remove private _PyImport_AddModuleObject() from the C API:
use public PyImport_AddModuleObject() instead.
* Remove private _PyImport_FindExtensionObjectEx() from the C API:
use private _PyImport_FindExtensionObject() instead.
* Add Include/cpython/import.h and Include/internal/pycore_import.h
header files.
* Move _PyImport_ReInitLock() to the internal C API. Don't export the
symbol anymore.
Add a new public PyObject_CallNoArgs() function to the C API: call a
callable Python object without any arguments.
It is the most efficient way to call a callback without any argument.
On x86-64, for example, PyObject_CallFunctionObjArgs(func, NULL)
allocates 960 bytes on the stack per call, whereas
PyObject_CallNoArgs(func) only allocates 624 bytes per call.
It is excluded from stable ABI 3.8.
Replace private _PyObject_CallNoArg() with public
PyObject_CallNoArgs() in C extensions: _asyncio, _datetime,
_elementtree, _pickle, _tkinter and readline.
* Replace global var Py_VerboseFlag with interp->config.verbose.
* Add _PyErr_NoMemory(tstate) function.
* Add tstate parameter to _PyEval_SetCoroutineOriginTrackingDepth()
and move the function to the internal API.
* Replace _PySys_InitMain(runtime, interp)
with _PySys_InitMain(runtime, tstate).
Add a new _PyCompilerFlags_INIT macro to initialize PyCompilerFlags
variables, rather than initializing cf_flags and cf_feature_version
explicitly in each variable.
It is now allowed to add new fields at the end of the PyTypeObject struct without having to allocate a dedicated compatibility flag in tp_flags.
This will reduce the risk of running out of bits in the 32-bit tp_flags value.
* bpo-22385: Support output separators in hex methods.
Also in binascii.hexlify aka b2a_hex.
The underlying implementation behind all hex generation in CPython uses the
same pystrhex.c implementation. This adds support to bytes, bytearray,
and memoryview objects.
The binascii module functions exist rather than being slated for deprecation
because they return bytes rather than requiring an intermediate step through a
str object.
This change was inspired by MicroPython which supports sep in its binascii
implementation (and does not yet support the .hex methods).
https://bugs.python.org/issue22385
It has been documented as deprecated and to be removed in 3.8;
From a comment on another thread – which I can't find ; leave get_coro_wrapper() for now, but always return `None`.
https://bugs.python.org/issue36933
Add a new threading.excepthook() function which handles uncaught
Thread.run() exception. It can be overridden to control how uncaught
exceptions are handled.
threading.ExceptHookArgs is not documented on purpose: it should not
be used directly.
* threading.excepthook() and threading.ExceptHookArgs.
* Add _PyErr_Display(): similar to PyErr_Display(), but accept a
'file' parameter.
* Add _thread._excepthook(): C implementation of the exception hook
calling _PyErr_Display().
* Add _thread._ExceptHookArgs: structseq type.
* Add threading._invoke_excepthook_wrapper() which handles the gory
details to ensure that everything remains alive during Python
shutdown.
* Add unit tests.
When using the "=" debug functionality of f-strings, use another Constant node (or a merged constant node) instead of adding expr_text to the FormattedValue node.
* sys.unraisablehook: add 'err_msg' field to UnraisableHookArgs.
* Use _PyErr_WriteUnraisableMsg() in _ctypes _DictRemover_call()
and gc delete_garbage().
PyErr_WriteUnraisable() now creates a traceback object if there is no
current traceback. Moreover, call PyErr_NormalizeException() and
PyException_SetTraceback() to normalize the exception value. Ignore
silently any error.
* _PyPreConfig_GetGlobalConfig() and _PyCoreConfig_GetGlobalConfig()
now do nothing if the configuration was not initialized with
_PyPreConfig_InitCompatConfig() and _PyCoreConfig_InitCompatConfig()
* Remove utf8_mode=-2 special case: use utf8_mode=-1 instead.
* Fix _PyPreConfig_InitPythonConfig():
* isolated = 0 instead of -1
* use_environment = 1 instead of -1
* Rename _PyConfig_INIT to _PyConfig_INIT_COMPAT
* Rename _PyPreConfig_Init() to _PyPreConfig_InitCompatConfig()
* Rename _PyCoreConfig_Init() to _PyCoreConfig_InitCompatConfig()
* PyInterpreterState_New() now uses _PyCoreConfig_InitPythonConfig()
as default configuration, but it's very quickly overriden anyway.
* _freeze_importlib.c uses _PyCoreConfig_SetString() to set
program_name.
* Cleanup preconfig_init_utf8_mode(): cmdline is always non-NULL.
GH-13238 made extra text after a # type: ignore accepted by the parser.
This finishes the job and actually plumbs the extra text through the
parser and makes it available in the AST.
Add new sys.unraisablehook() function which can be overridden to
control how "unraisable exceptions" are handled. It is called when an
exception has occurred but there is no way for Python to handle it.
For example, when a destructor raises an exception or during garbage
collection (gc.collect()).
Changes:
* Add an internal UnraisableHookArgs type used to pass arguments to
sys.unraisablehook.
* Add _PyErr_WriteUnraisableDefaultHook().
* The default hook now ignores exception on writing the traceback.
* test_sys now uses unittest.main() to automatically discover tests:
remove test_main().
* Add _PyErr_Init().
* Fix PyErr_WriteUnraisable(): hold a strong reference to sys.stderr
while using it
_PyRuntime.preconfig.coerce_c_locale can now be used to
check if the C locale has been coerced.
* Fix _Py_LegacyLocaleDetected(): don't attempt to coerce the
C locale if LC_ALL environment variable is set. Add 'warn'
parameter: emit_stderr_warning_for_legacy_locale() must not
the LC_ALL env var.
* _PyPreConfig_Write() sets coerce_c_locale to 0 if
_Py_CoerceLegacyLocale() fails.
* Add _PyPreConfig.parse_argv
* Add _PyCoreConfig._config_init field and _PyCoreConfigInitEnum enum
type
* Initialization functions: reject preconfig=NULL and config=NULL
* Add config parameter to _PyCoreConfig_DecodeLocaleErr(): pass
config->argv to _Py_PreInitializeFromPyArgv(), to parse config
command line arguments in preinitialization.
* Add config parameter to _PyCoreConfig_SetString(). It now
preinitializes Python.
* _PyCoreConfig_SetPyArgv() now also preinitializes Python for wide
argv
* Fix _Py_PreInitializeFromCoreConfig(): don't pass args to
_Py_PreInitializeFromPyArgv() if config.parse_argv=0.
* Use "char * const *" and "wchar_t * const *" types for 'argv'
parameters and _PyArgv.argv.
* Add unit test on preinitialization from argv.
* _PyPreConfig.allocator type becomes int
* Add _PyPreConfig_InitFromPreConfig() and
_PyPreConfig_InitFromCoreConfig() helper functions
_PyPreConfig_InitPythonConfig() and _PyCoreConfig_InitPythonConfig()
no longer inherit their values from global configuration variables.
Changes:
* _PyPreCmdline_Read() now ignores -X dev and PYTHONDEVMODE
if dev_mode is already set.
* Inline _PyPreConfig_INIT macro into _PyPreConfig_Init() function.
* Inline _PyCoreConfig_INIT macro into _PyCoreConfig_Init() function.
* Replace _PyCoreConfig_Init() with _PyCoreConfig_InitPythonConfig()
in most tests of _testembed.c.
* Replace _PyCoreConfig_Init() with _PyCoreConfig_InitIsolatedConfig()
in _freeze_importlib.c.
* Move some initialization functions from the internal
to the private API.
* The type of initlization function 'argc' parameters becomes
Py_ssize_t, instead of int.
* Change _PyPreConfig_Copy() return type to void, instead of int.
The function cannot fail anymore.
* Fix compilation warnings on Windows.
* Add _PyInitError functions:
* _PyInitError_Ok()
* _PyInitError_Error()
* _PyInitError_NoMemory()
* _PyInitError_Exit()
* _PyInitError_IsError()
* _PyInitError_IsExit()
* _PyInitError_Failed()
* frozenmain.c and _testembed.c now use functions rather than macros.
* Move _Py_INIT_xxx() macros to the internal API.
* Move _PyWstrList_INIT macro to the internal API.
Py_Main() and _Py_RunMain() now return the exitcode rather than
calling Py_Exit(exitcode) when calling PyErr_Print() if the current
exception type is SystemExit.
* Add _Py_HandleSystemExit().
* Add pymain_exit_err_print().
* Add pymain_exit_print().
_PyPreConfig_InitIsolatedConfig() sets configure_locale to 0 to
prevent Python to modify the LC_CTYPE locale. In that case,
coerce_c_locale an coerce_c_locale_warn are set to 0 as well.
Add new functions to get the Python interpreter behavior:
* _PyPreConfig_InitPythonConfig()
* _PyCoreConfig_InitPythonConfig()
Add new functions to get an isolated configuration:
* _PyPreConfig_InitIsolatedConfig()
* _PyCoreConfig_InitIsolatedConfig()
Replace _PyPreConfig_INIT and _PyCoreConfig_INIT with new functions
_PyPreConfig_Init() and _PyCoreConfig_Init().
_PyCoreConfig: set configure_c_stdio and parse_argv to 0 by default
to behave as Python 3.6 in the default configuration.
_PyCoreConfig_Read() no longer sets coerce_c_locale_warn to 1 if it's
equal to 0. coerce_c_locale_warn must now be set to -1 (ex: using
_PyCoreConfig_InitPythonConfig()) to enable C locale coercion
warning.
Add unit tests for _PyCoreConfig_InitPythonConfig()
and _PyCoreConfig_InitIsolatedConfig().
Changes:
* Rename _PyCoreConfig_GetCoreConfig() to _PyPreConfig_GetCoreConfig()
* Fix core_read_precmdline(): handle parse_argv=0
* Fix _Py_PreInitializeFromCoreConfig(): pass coreconfig.argv
to _Py_PreInitializeFromPyArgv(), except if parse_argv=0
* Add PyMemAllocatorName enum
* _PyPreConfig.allocator type becomes PyMemAllocatorName, instead of
char*
* Remove _PyPreConfig_Clear()
* Add _PyMem_GetAllocatorName()
* Rename _PyMem_GetAllocatorsName() to
_PyMem_GetCurrentAllocatorName()
* Remove _PyPreConfig_SetAllocator(): just call
_PyMem_SetupAllocators() directly, we don't have do reallocate the
configuration with the new allocator anymore!
* _PyPreConfig_Write() parameter becomes const, as it should be in
the first place!
* Add a private _Py_InitializeMain() function.
* Add again _PyCoreConfig._init_main.
* _Py_InitializeFromConfig() now uses _init_main to decide
if _Py_InitializeMainInterpreter() should be called.
* _PyCoreConfig: rename _frozen to pathconfig_warnings, its value is
now the opposite of Py_FrozenFlag.
* Add an unit test for _init_main=0 and _Py_InitializeMain().
* _PyCoreConfig_Read() doesn't parse nor update argv
if parse_argv is 0.
* Move path configuration fields in _PyCoreConfig.
* Add an unit test for parse_argv=0.
* Remove unused "done": label in _Py_RunMain().
We cannot use "unsigned int" for exitcode on Windows, since
Py_Main() and _Py_RunMain() always return an "int".
Changes:
* _PyPathConfig_ComputeSysPath0() now returns -1 if an exception is
raised.
* pymain_run_python() no longer uses _PyInitError but display the
exception and set exitcode to 1 in case of error.
* Fix _Py_RunMain(): return an exitcode rather than calling
exit() on pymain_run_python() failure.
* _Py_ExitInitError() no longer uses ExitProcess() on Windows, use
exit() on all platforms.
* _Py_ExitInitError() now fails with a fatal error if 'err' is not an
error not an exit.
Remove the PyEval_ReInitThreads() function from the Python C API.
It should not be called explicitly: use PyOS_AfterFork_Child()
instead.
Rename PyEval_ReInitThreads() to _PyEval_ReInitThreads() and add a
'runtime' parameter.
Add "struct _ceval_runtime_state *ceval = &_PyRuntime.ceval;" local
variables to function to better highlight the dependency on the
global variable _PyRuntime and to point directly to _PyRuntime.ceval
field rather than on the larger _PyRuntime.
Changes:
* Add _PyRuntimeState_GetThreadState(runtime) macro.
* Add _PyEval_AddPendingCall(ceval, ...) and
_PyThreadState_Swap(gilstate, ...) functions.
* _PyThreadState_GET() macro now calls
_PyRuntimeState_GetThreadState() using &_PyRuntime.
* Add 'ceval' parameter to COMPUTE_EVAL_BREAKER(),
SIGNAL_PENDING_SIGNALS(), _PyEval_SignalAsyncExc(),
_PyEval_SignalReceived() and _PyEval_FiniThreads() macros and
functions.
* Add 'tstate' parameter to call_function(), do_call_core() and
do_raise().
* Add 'runtime' parameter to _Py_CURRENTLY_FINALIZING(),
_Py_FinishPendingCalls() and _PyThreadState_DeleteExcept()
macros and functions.
* Declare 'runtime', 'tstate', 'ceval' and 'eval_breaker' variables
as constant.
Add new trashcan macros to deal with a double deallocation that could occur when the `tp_dealloc` of a subclass calls the `tp_dealloc` of a base class and that base class uses the trashcan mechanism.
Patch by Jeroen Demeyer.
If a "=" is specified a the end of an f-string expression, the f-string will evaluate to the text of the expression, followed by '=', followed by the repr of the value of the expression.
_PyCoreConfig_SetPyArgv() and _PyCoreConfig_SetWideString() now
pre-initialize Python if needed to ensure that the locale encoding is
properly configured.
* Add _Py_PreInitializeFromPyArgv() internal function.
* Add 'args' parameter to _Py_PreInitializeFromCoreConfig()
_PyCoreConfig: Change filesystem_encoding, filesystem_errors,
stdio_encoding and stdio_errors fields type from char* to wchar_t*.
Changes:
* PyInterpreterState: replace fscodec_initialized (int) with fs_codec
structure.
* Add get_error_handler_wide() and unicode_encode_utf8() helper
functions.
* Add error_handler parameter to unicode_encode_locale()
and unicode_decode_locale().
* Remove _PyCoreConfig_SetString().
* Rename _PyCoreConfig_SetWideString() to _PyCoreConfig_SetString().
* Rename _PyCoreConfig_SetWideStringFromString()
to _PyCoreConfig_DecodeLocale().
Add _Py_FORCE_UTF8_LOCALE and _Py_FORCE_UTF8_FS_ENCODING macros to
avoid factorize "#if defined(__ANDROID__) || defined(__VXWORKS__)"
and "#if defined(__APPLE__)".
Cleanup also config_init_fs_encoding().
* Remove _PyInitError.user_err field and _Py_INIT_USER_ERR() macro:
use _Py_INIT_ERR() instead. _Py_ExitInitError() now longer calls
abort() on error: exit with exit code 1 instead.
* Add _PyInitError._type private field.
* exitcode field type is now unsigned int on Windows.
* Rename prefix field to _func.
* Rename msg field to err_msg.
This commit contains the implementation of PEP570: Python positional-only parameters.
* Update Grammar/Grammar with new typedarglist and varargslist
* Regenerate grammar files
* Update and regenerate AST related files
* Update code object
* Update marshal.c
* Update compiler and symtable
* Regenerate importlib files
* Update callable objects
* Implement positional-only args logic in ceval.c
* Regenerate frozen data
* Update standard library to account for positional-only args
* Add test file for positional-only args
* Update other test files to account for positional-only args
* Add News entry
* Update inspect module and related tests
* Add _PyEval_FiniThreads2(). _PyEval_FiniThreads() now only clears
the pending lock, whereas _PyEval_FiniThreads2() destroys the GIL.
* pymain_free() now calls _PyEval_FiniThreads2().
* Py_FinalizeEx() now calls _PyEval_FiniThreads().
Py_FinalizeEx() now clears _PyRuntime.warnings variables and
_PyRuntime.exitfuncs.
Changes:
* Add _PyWarnings_Fini(): called by Py_FinalizeEx()
* call_ll_exitfuncs() now clears _PyRuntime.exitfuncs while iterating
on it (on backward order).
Release build and debug build are now ABI compatible: the Py_DEBUG
define no longer implies Py_TRACE_REFS define which introduces the
only ABI incompatibility.
A new "./configure --with-trace-refs" build option is now required to
get Py_TRACE_REFS define which adds sys.getobjects() function and
PYTHONDUMPREFS environment variable.
Changes:
* Add ./configure --with-trace-refs
* Py_DEBUG no longer implies Py_TRACE_REFS
Py_InitializeEx() now uses a runtime variable passed to subfunctions,
rather than working directly on the global variable _PyRuntime.
Add 'runtime' parameter to _PyCoreConfig_Write(), _PySys_Create(),
_PySys_InitMain(), _PyGILState_Init(),
emit_stderr_warning_for_legacy_locale() and other subfunctions.
* Add a 'runtime' variable to Py_FinalizeEx() rather than working
directly on the global variable _PyRuntime
* Add a 'runtime' parameter to _PyGC_Fini(), _PyGILState_Fini()
and call_ll_exitfuncs()
The PyOS_AfterFork_Child() function now pass a 'runtime' parameter to
subfunctions.
* Fix _PyRuntimeState_ReInitThreads(): use the correct memory allocator
* Add runtime parameter to _PyRuntimeState_ReInitThreads(),
_PyGILState_Reinit() and _PyInterpreterState_DeleteExceptMain()
* Move _PyGILState_Reinit() to the internal C API.
* Add 'runtime' parameter to _PyThreadState_Init()
* Add 'gilstate' parameter to _PyGILState_NoteThreadState()
* Move _PyThreadState_Init() and _PyThreadState_DeleteExcept()
to the internal C API.
Add a new _testinternalcapi module to test the internal C API.
Move _Py_GetConfigsAsDict() function to the internal C API:
_testembed now uses _testinternalcapi to access the function.
Change PyAPI_FUNC(type), PyAPI_DATA(type) and PyMODINIT_FUNC macros
of pyport.h when Py_BUILD_CORE_MODULE is defined.
The Py_BUILD_CORE_MODULE define must be now be used to build a C
extension as a dynamic library accessing Python internals: export the
PyInit_xxx() function in DLL exports on Windows.
Changes:
* Py_BUILD_CORE_BUILTIN and Py_BUILD_CORE_MODULE now imply
Py_BUILD_CORE directy in pyport.h.
* ceval.c compilation now fails with an error if Py_BUILD_CORE is not
defined, just to ensure that Python is build with the correct
defines.
* setup.py now compiles _pickle.c with Py_BUILD_CORE_MODULE define.
* setup.py compiles _json.c with Py_BUILD_CORE_MODULE define, rather
than Py_BUILD_CORE_BUILTIN define
* PCbuild/pythoncore.vcxproj: Add Py_BUILD_CORE_BUILTIN define.
Add a new _PyObject_CheckConsistency() function which can be used to
help debugging. The function is available in release mode.
Add a 'check_content' parameter to _PyDict_CheckConsistency().
This is effectively an un-revert of #11617 and #12024 (reverted in #12159). Portions of those were merged in other PRs (with lower risk) and this represents the remainder. Note that I found 3 different bugs in the original PRs and have fixed them here.
Modify CLEANBYTE, DEADDYTE and FORBIDDENBYTE constants: use 0xCD,
0xDD and 0xFD, rather than 0xCB, 0xBB and 0xFB, to use the same byte
patterns than Windows CRT debug malloc() and free().
Replace _PyMem_IsFreed() function with _PyMem_IsPtrFreed() inline
function. The function is now way more efficient, it became a simple
comparison on integers, rather than a short loop. It detects also
uninitialized bytes and "forbidden bytes" filled by debug hooks
on memory allocators.
Add unit tests on _PyObject_IsFreed().
bpo-36443, bpo-36202: Since Python 3.7.0, calling Py_DecodeLocale()
before Py_Initialize() produces mojibake if the LC_CTYPE locale is
coerced and/or if the UTF-8 Mode is enabled by the user
configuration. This change fix the issue by disabling LC_CTYPE
coercion and UTF-8 Mode by default. They must now be enabled
explicitly (opt-in) using the new _Py_PreInitialize() API with
_PyPreConfig.
When embedding Python, set coerce_c_locale and utf8_mode attributes
of _PyPreConfig to -1 to enable automatically these parameters
depending on the LC_CTYPE locale, environment variables and command
line arguments
Alternative: Setting Py_UTF8Mode to 1 always explicitly enables the
UTF-8 Mode.
Changes:
* _PyPreConfig_INIT now sets coerce_c_locale and utf8_mode to 0 by
default.
* _Py_InitializeFromArgs() and _Py_InitializeFromWideArgs() can now
be called with config=NULL.
* _PyCoreConfig_Write() now updates _PyRuntime.preconfig
* Remove _PyPreCmdline_Copy()
* _PyPreCmdline_Read() now accepts _PyPreConfig and _PyCoreConfig
optional configurations.
* Rename _PyPreConfig_ReadFromArgv() to _PyPreConfig_Read(). Simplify
the code.
* Calling _PyCoreConfig_Read() no longer adds the warning options
twice: don't add a warning option if it's already in the list.
* Rename _PyCoreConfig_ReadFromArgv() to _PyCoreConfig_Read().
* Rename config_from_cmdline() to _PyCoreConfig_ReadFromArgv().
* Add more assertions on _PyCoreConfig in _PyCoreConfig_Read().
* Move some functions.
* Make some config functions private.
* Make _PyPreConfig_GetEnv(), _PyCoreConfig_GetEnv() and
_PyCoreConfig_GetEnvDup() private
* _Py_get_env_flag() first parameter becomes "int use_environment"
* Add _Py_GetConfigsAsDict() function to get all configurations as a
dict.
* dump_config() of _testembed.c now dumps preconfig as a separated
key: call _Py_GetConfigsAsDict().
* Make _PyMainInterpreterConfig_AsDict() private.
* Initialize _PyPreConfig.dev_mode to -1.
* _PyPreConfig_Read(): coreconfig has the priority over preconfig.
* _PyCoreConfig_Read() now calls _PyPreCmdline_Read() internally.
* config_from_cmdline() now pass _PyPreCmdline to config_read().
* Add _PyPreCmdline_Copy().
Prepare code to move some _PyPreConfig parameters into _PyPreCmdline.
Changes:
* _PyCoreConfig_ReadFromArgv(): remove preconfig parameter,
use _PyRuntime.preconfig.
* Add _PyPreCmdline_GetPreConfig() (called by _PyPreConfig_Read()).
* Rename _PyPreCmdline_Init() to _PyPreCmdline_SetArgv()
* Factorize _Py_PreInitializeFromPreConfig() code: add
pyinit_preinit().
* _PyPreConfig_Read() now sets coerce_c_locale to 2 if it must be
coerced.
* Remove _PyCoreConfig_ReadPreConfig().
* _PyCoreConfig_Write() now copies updated preconfig into _PyRuntime.
* Add _PyRuntime.pre_initialized: set to 1 when Python
is pre-initialized
* Add _Py_PreInitialize() and _Py_PreInitializeFromPreConfig().
* _PyCoreConfig_Read() now calls _Py_PreInitialize().
* Move _PyPreConfig_GetGlobalConfig() and
_PyCoreConfig_GetGlobalConfig() calls from main.c to preconfig.c
and coreconfig.c.
At Python initialization, the current directory is no longer
prepended to sys.path if it has been removed.
Rename _PyPathConfig_ComputeArgv0() to
_PyPathConfig_ComputeSysPath0() to avoid confusion between argv[0]
and sys.path[0].
When Python is compiled with Valgrind support, release Unicode
interned strings at exit in _PyUnicode_Fini().
* Rename _Py_ReleaseInternedUnicodeStrings() to
unicode_release_interned() and make it private.
* unicode_release_interned() is now called from _PyUnicode_Fini():
it must be called with a running Python thread state for TRASHCAN,
it cannot be called from pymain_free().
* Don't display statistics on interned strings at exit anymore
Python initialization now fails if decoding pybuilddir.txt
configuration file fails at startup.
_PyPathConfig_Calculate() now reports memory allocation failure and
decoding error on decoding pybuilddir.txt content from
UTF-8/surrogateescape.
The last parameter of _Py_wreadlink(), _Py_wrealpath() and
_Py_wgetcwd() is a length, not a size: number of characters including
the trailing NUL character.
Enhance also documentation of error conditions.
Replace messy _Py_wstrlist_xxx() functions with a new clean
_PyWstrList structure and new _PyWstrList_xxx() functions.
Changes:
* Add _PyCoreConfig.use_module_search_paths to decide if
_PyCoreConfig.module_search_paths should be computed or not, to
support empty search path list.
* _PyWstrList_Clear() sets length to 0 and items to NULL, whereas
_Py_wstrlist_clear() only freed memory.
* _PyWstrList_Append() returns an int, whereas _Py_wstrlist_append()
returned _PyInitError.
* _PyWstrList uses Py_ssize_t for the length, instead of int.
* Replace (int, wchar_t**) with _PyWstrList in:
* _PyPreConfig
* _PyCoreConfig
* _PyPreCmdline
* _PyCmdline
* Replace "int orig_argv; wchar_t **orig_argv;"
with "_PyWstrList orig_argv".
* _PyCmdline and _PyPreCmdline now also copy wchar_argv.
* Rename _PyArgv_Decode() to _PyArgv_AsWstrList().
* PySys_SetArgvEx() now pass the fixed (argc, argv) to
_PyPathConfig_ComputeArgv0() (don't pass negative argc or NULL
argv).
* _PyOS_GetOpt() uses Py_ssize_t
The value is a string for string and byte literals, None otherwise.
It is 'u' for u"..." literals, 'b' for b"..." literals, '' for "..." literals.
The 'r' (raw) prefix is ignored.
Does not apply to f-strings.
This appears sufficient to make mypy capable of using the stdlib ast module instead of typed_ast (assuming a mypy patch I'm working on).
WIP: I need to make the tests pass. @ilevkivskyi @serhiy-storchaka
https://bugs.python.org/issue36280
d_initial, the first state of a particular DFA in the parser has always been initialized to 0 in the old pgen as well as the new pgen. As this value is not used and the first state of each DFA is assumed to be the first element in the array representing it, remove d_initial from the parser to reduce complexity.
The macros were working only because our usage happened to parse correctly. Changing that usage (e.g. with pointers) would break the macros. This fixes that.
This adds a `feature_version` flag to `ast.parse()` (documented) and `compile()` (hidden) that allow tweaking the parser to support older versions of the grammar. In particular if `feature_version` is 5 or 6, the hacks for the `async` and `await` keyword from PEP 492 are reinstated. (For 7 or higher, these are unconditionally treated as keywords, but they are still special tokens rather than `NAME` tokens that the parser driver recognizes.)
https://bugs.python.org/issue35975
* _PyPreConfig_Read() now sets temporarily LC_CTYPE to the user
preferred locale, as _PyPreConfig_Write() will do permanentely.
* Fix _PyCoreConfig_Clear(): clear run_xxx attributes
* _Py_SetArgcArgv() doesn't have to be exported
* _PyCoreConfig_SetGlobalConfig() no longer applies preconfig
* _PyPreConfig_Write() now reallocates the pre-configuration with the
new memory allocator.
* It is no longer needed to force the "default raw memory allocator"
to clear pre-configuration and core configuration. Simplify the
code.
* _PyPreConfig_Write() now does nothing if called after
Py_Initialize(): no longer check if the allocator is the same.
* Remove _PyMem_GetDebugAllocatorsName(): dev mode sets again
allocator to "debug".
* _PyPreConfig_Write() now sets the memory allocator.
* _PyPreConfig_Write() gets a return type: _PyInitError.
* _Py_InitializeCore() now reads and writes the pre-configuration
(set the memory allocator, configure the locale) before reading and
writing the core configuration.
The development mode now uses the effective name of the debug memory
allocator ("pymalloc_debug" or "malloc_debug"). So the name doesn't
change after setting the memory allocator.
* Move 'allocator' and 'dev_mode' fields from _PyCoreConfig
to _PyPreConfig.
* Fix InitConfigTests of test_embed: dev_mode sets allocator to
"debug", add a new tests for env vars with dev mode enabled.
* Move following fields from _PyCoreConfig to _PyPreConfig:
* coerce_c_locale
* coerce_c_locale_warn
* legacy_windows_stdio
* utf8_mode
* _PyPreConfig_ReadFromArgv() is now responsible to choose the
filesystem encoding
* _PyPreConfig_Write() now sets the LC_CTYPE locale
* Add _PyPreConfig structure
* Move 'ignored' and 'use_environment' fields from _PyCoreConfig
to _PyPreConfig
* Add a new "_PyPreConfig preconfig;" field to _PyCoreConfig
* Revert "bpo-36097: Use only public C-API in the_xxsubinterpreters module (adding as necessary). (#12003)"
This reverts commit bcfa450f21.
* Revert "bpo-33608: Simplify ceval's DISPATCH by hoisting eval_breaker ahead of time. (gh-12062)"
This reverts commit bda918bf65.
* Revert "bpo-33608: Use _Py_AddPendingCall() in _PyCrossInterpreterData_Release(). (gh-12024)"
This reverts commit b05b711a2c.
* Revert "bpo-33608: Factor out a private, per-interpreter _Py_AddPendingCall(). (GH-11617)"
This reverts commit ef4ac967e2.
Use UTF-8 as the system encoding on VxWorks.
The main reason are:
1. The locale is frequently misconfigured.
2. Missing some functions to deal with locale in VxWorks C library.
Pgen is the oldest piece of technology in the CPython repository, building it requires various #if[n]def PGEN hacks in other parts of the code and it also depends more and more on CPython internals. This commit removes the old pgen C code and replaces it for a new version implemented in pure Python. This is a modified and adapted version of lib2to3/pgen2 that can generate grammar files compatibles with the current parser.
This commit also eliminates all the #ifdef and code branches related to pgen, simplifying the code and making it more maintainable. The regen-grammar step now uses $(PYTHON_FOR_REGEN) that can be any version of the interpreter, so the new pgen code maintains compatibility with older versions of the interpreter (this also allows regenerating the grammar with the current CI solution that uses Python3.5). The new pgen Python module also makes use of the Grammar/Tokens file that holds the token specification, so is always kept in sync and avoids having to maintain duplicate token definitions.
* Add _PyCoreConfig_ReadFromArgv() function which parses command line
options: move code from main.c to coreconfig.c.
* Add _PyCoreConfig_Write() to write the new configuration: coerce
the LC_CTYPE locale, set Py_xxx global configuration variables,
etc.
* _PyCoreConfig_ReadFromArgv() now only changes the LC_CTYPE locale
temporarily. _PyCoreConfig_Write() becomes responsible to set the
LC_CTYPE locale.
* Add _Py_SetArgcArgv() and _Py_ClearArgcArgv() functions
* Rename many "pymain_xxx()" functions
* Add "const" to some function parameters
* Reorganize main.c to declare functions in the order in which they
are called.
* Move fields from _PyMain to _PyCoreConfig:
* skip_first_line
* run_command
* run_module
* run_filename
* Replace _PyMain.stdin_is_interactive with a new
stdin_is_interactive(config) function
* Rename _PyMain to _PyArgv. Add "const _PyArgv *args" field
to _PyCmdline.
Add a new _Py_INIT_EXIT() macro to be able to exit Python with an
exitcode using _PyInitError API. Rewrite function calls by
pymain_main() to use _PyInitError.
Changes:
* Remove _PyMain.err and _PyMain.status field
* Add _Py_INIT_EXIT() macro and _PyInitError.exitcode field.
* Rename _Py_FatalInitError() to _Py_ExitInitError().
The whole coreconfig.h header is now excluded from Py_LIMITED_API.
Move functions definitions into a new internal pycore_coreconfig.h
header.
* Move Include/coreconfig.h to Include/cpython/coreconfig.h
* coreconfig.h header is now excluded from Py_LIMITED_API
* Move functions to pycore_coreconfig.h
Ensure that the main interpreter is active (in the main thread) for signal-handling operations. This is increasingly relevant as people use subinterpreters more.
https://bugs.python.org/issue35724
* bpo-1054041: Exit properly by a signal after a ^C.
An uncaught KeyboardInterrupt exception means the user pressed ^C and
our code did not handle it. Programs that install SIGINT handlers are
supposed to reraise the SIGINT signal to the SIG_DFL handler in order
to exit in a manner that their calling process can detect that they
died due to a Ctrl-C. https://www.cons.org/cracauer/sigint.html
After this change on POSIX systems
while true; do python -c 'import time; time.sleep(23)'; done
can be stopped via a simple Ctrl-C instead of the shell infinitely
restarting a new python process.
What to do on Windows, or if anything needs to be done there has not
yet been determined. That belongs in its own PR.
TODO(gpshead): A unittest for this behavior is still needed.
* Do the unhandled ^C check after pymain_free.
* Return STATUS_CONTROL_C_EXIT on Windows.
* Fix ifdef around unistd.h include.
* 📜🤖 Added by blurb_it.
* Add STATUS_CTRL_C_EXIT to the os module on Windows
* Add unittests.
* Don't send CTRL_C_EVENT in the Windows test.
It was causing CI systems to bail out of the entire test suite.
See https://dev.azure.com/Python/cpython/_build/results?buildId=37980
for example.
* Correct posix test (fail on macOS?) check.
* STATUS_CONTROL_C_EXIT must be unsigned.
* Improve the error message.
* test typo :)
* Skip if the bash version is too old.
...and rename the windows test to reflect what it does.
* min bash version is 4.4, detect no bash.
* restore a blank line i didn't mean to delete.
* PyErr_Occurred() before the Py_DECREF(co);
* Don't add os.STATUS_CONTROL_C_EXIT as a constant.
* Update the Windows test comment.
* Refactor common logic into a run_eval_code_obj fn.
* Add tokenization of :=
- Add token to Include/token.h. Add token to documentation in Doc/library/token.rst.
- Run `./python Lib/token.py` to regenerate Lib/token.py.
- Update Parser/tokenizer.c: add case to handle `:=`.
* Add initial usage of := in grammar.
* Update Python.asdl to match the grammar updates. Regenerated Include/Python-ast.h and Python/Python-ast.c
* Update AST and compiler files in Python/ast.c and Python/compile.c. Basic functionality, this isn't scoped properly
* Regenerate Lib/symbol.py using `./python Lib/symbol.py`
* Tests - Fix failing tests in test_parser.py due to changes in token numbers for internal representation
* Tests - Add simple test for := token
* Tests - Add simple tests for named expressions using expr and suite
* Tests - Update number of levels for nested expressions to prevent stack overflow
* Update symbol table to handle NamedExpr
* Update Grammar to allow assignment expressions in if statements.
Regenerate Python/graminit.c accordingly using `make regen-grammar`
* Tests - Add additional tests for named expressions in RoundtripLegalSyntaxTestCase, based on examples and information directly from PEP 572
Note: failing tests are currently commented out (4 out of 24 tests currently fail)
* Tests - Add temporary syntax test failure tests in test_parser.py
Note: There is an outstanding TODO for this -- syntax tests need to be
moved to a different file (presumably test_syntax.py), but this is
covering what needs to be tested at the moment, and it's more convenient
to run a single test for the time being
* Add support for allowing assignment expressions as function argument annotations. Uncomment tests for these cases because they all pass now!
* Tests - Move existing syntax tests out of test_parser.py and into test_named_expressions.py. Refactor syntax tests to use unittest
* Add TargetScopeError exception to extend SyntaxError
Note: This simply creates the TargetScopeError exception, it is not yet
used anywhere
* Tests - Update tests per PEP 572
Continue refactoring test suite:
The named expression test suite now checks for any invalid cases that
throw exceptions (no longer limited to SyntaxErrors), assignment tests
to ensure that variables are properly assigned, and scope tests to
ensure that variable availability and values are correct
Note:
- There are still tests that are marked to skip, as they are not yet
implemented
- There are approximately 300 lines of the PEP that have not yet been
addressed, though these may be deferred
* Documentation - Small updates to XXX/todo comments
- Remove XXX from child description in ast.c
- Add comment with number of previously supported nested expressions for
3.7.X in test_parser.py
* Fix assert in seq_for_testlist()
* Cleanup - Denote "Not implemented -- No keyword args" on failing test case. Fix PEP8 error for blank lines at beginning of test classes in test_parser.py
* Tests - Wrap all file opens in `with...as` to ensure files are closed
* WIP: handle f(a := 1)
* Tests and Cleanup - No longer skips keyword arg test. Keyword arg test now uses a simpler test case and does not rely on an external file. Remove print statements from ast.c
* Tests - Refactor last remaining test case that relied on on external file to use a simpler test case without the dependency
* Tests - Add better description of remaning skipped tests. Add test checking scope when using assignment expression in a function argument
* Tests - Add test for nested comprehension, testing value and scope. Fix variable name in skipped comprehension scope test
* Handle restriction of LHS for named expressions - can only assign to LHS of type NAME. Specifically, restrict assignment to tuples
This adds an alternative set_context specifically for named expressions,
set_namedexpr_context. Thus, context is now set differently for standard
assignment versus assignment for named expressions in order to handle
restrictions.
* Tests - Update negative test case for assigning to lambda to match new error message. Add negative test case for assigning to tuple
* Tests - Reorder test cases to group invalid syntax cases and named assignment target errors
* Tests - Update test case for named expression in function argument - check that result and variable are set correctly
* Todo - Add todo for TargetScopeError based on Guido's comment (2b3acd37bd (r30472562))
* Tests - Add named expression tests for assignment operator in function arguments
Note: One of two tests are skipped, as function arguments are currently treating
an assignment expression inside of parenthesis as one child, which does
not properly catch the named expression, nor does it count arguments
properly
* Add NamedStore to expr_context. Regenerate related code with `make regen-ast`
* Add usage of NamedStore to ast_for_named_expr in ast.c. Update occurances of checking for Store to also handle NamedStore where appropriate
* Add ste_comprehension to _symtable_entry to track if the namespace is a comprehension. Initialize ste_comprehension to 0. Set set_comprehension to 1 in symtable_handle_comprehension
* s/symtable_add_def/symtable_add_def_helper. Add symtable_add_def to handle grabbing st->st_cur and passing it to symtable_add_def_helper. This now allows us to call the original code from symtable_add_def by instead calling symtable_add_def_helper with a different ste.
* Refactor symtable_record_directive to take lineno and col_offset as arguments instead of stmt_ty. This allows symtable_record_directive to be used for stmt_ty and expr_ty
* Handle elevating scope for named expressions in comprehensions.
* Handle error for usage of named expression inside a class block
* Tests - No longer skip scope tests. Add additional scope tests
* Cleanup - Update error message for named expression within a comprehension within a class. Update comments. Add assert for symtable_extend_namedexpr_scope to validate that we always find at least a ModuleScope if we don't find a Class or FunctionScope
* Cleanup - Add missing case for NamedStore in expr_context_name. Remove unused var in set_namedexpr_content
* Refactor - Consolidate set_context and set_namedexpr_context to reduce duplicated code. Special cases for named expressions are handled by checking if ctx is NamedStore
* Cleanup - Add additional use cases for ast_for_namedexpr in usage comment. Fix multiple blank lines in test_named_expressions
* Tests - Remove unnecessary test case. Renumber test case function names
* Remove TargetScopeError for now. Will add back if needed
* Cleanup - Small comment nit for consistency
* Handle positional argument check with named expression
* Add TargetScopeError exception definition. Add documentation for TargetScopeError in c-api docs. Throw TargetScopeError instead of SyntaxError when using a named expression in a comprehension within a class scope
* Increase stack size for parser by 200. This is a minimal change (approx. 5kb) and should not have an impact on any systems. Update parser test to allow 99 nested levels again
* Add TargetScopeError to exception_hierarchy.txt for test_baseexception.py_
* Tests - Major update for named expression tests, both in test_named_expressions and test_parser
- Add test for TargetScopeError
- Add tests for named expressions in comprehension scope and edge cases
- Add tests for named expressions in function arguments (declarations
and call sites)
- Reorganize tests to group them more logically
* Cleanup - Remove unnecessary comment
* Cleanup - Comment nitpicks
* Explicitly disallow assignment expressions to a name inside parentheses, e.g.: ((x) := 0)
- Add check for LHS types to detect a parenthesis then a name (see note)
- Add test for this scenario
- Update tests for changed error message for named assignment to a tuple
(also, see note)
Note: This caused issues with the previous error handling for named assignment
to a LHS that contained an expression, such as a tuple. Thus, the check
for the LHS of a named expression must be changed to be more specific if
we wish to maintain the previous error messages
* Cleanup - Wrap lines more strictly in test file
* Revert "Explicitly disallow assignment expressions to a name inside parentheses, e.g.: ((x) := 0)"
This reverts commit f1531400ca7d7a2d148830c8ac703f041740896d.
* Add NEWS.d entry
* Tests - Fix error in test_pickle.test_exceptions by adding TargetScopeError to list of exceptions
* Tests - Update error message tests to reflect improved messaging convention (s/can't/cannot)
* Remove cases that cannot be reached in compile.c. Small linting update.
* Update Grammar/Tokens to add COLONEQUAL. Regenerate all files
* Update TargetScopeError PRE_INIT and POST_INIT, as this was purposefully left out when fixing rebase conflicts
* Add NamedStore back and regenerate files
* Pass along line number and end col info for named expression
* Simplify News entry
* Fix compiler warning and explicity mark fallthrough
* Split _Py_InitializeCore_impl() into subfunctions: add multiple pycore_init_xxx() functions
* Preliminary sys.stderr is now set earlier to get an usable
sys.stderr ealier.
* Move code into _Py_Initialize_ReconfigureCore() to be able to call
it from _Py_InitializeCore().
* Split _PyExc_Init(): create a new _PyBuiltins_AddExceptions()
function.
* Call _PyExc_Init() earlier in _Py_InitializeCore_impl()
and new_interpreter() to get working exceptions earlier.
* _Py_ReadyTypes() now returns _PyInitError rather than calling
Py_FatalError().
* Misc code cleanup
* The PyByteArray_Init() and PyByteArray_Fini() functions have been
removed. They did nothing since Python 2.7.4 and Python 3.2.0, were
excluded from the limited API (stable ABI), and were not
documented.
* Move "_PyXXX_Init()" and "_PyXXX_Fini()" declarations from
Include/cpython/pylifecycle.h to
Include/internal/pycore_pylifecycle.h. Replace
"PyAPI_FUNC(TYPE)" with "extern TYPE".
* _PyExc_Init() now returns an error on failure rather than calling
Py_FatalError(). Move macros inside _PyExc_Init() and undefine them
when done. Rewrite macros to make them look more like statement:
add ";" when using them, add "do { ... } while (0)".
* _PyUnicode_Init() now returns a _PyInitError error rather than call
Py_FatalError().
* Move stdin check from _PySys_BeginInit() to init_sys_streams().
* _Py_ReadyTypes() now returns a _PyInitError error rather than
calling Py_FatalError().
The majority of this PR is tediously passing `end_lineno` and `end_col_offset` everywhere. Here are non-trivial points:
* It is not possible to reconstruct end positions in AST "on the fly", some information is lost after an AST node is constructed, so we need two more attributes for every AST node `end_lineno` and `end_col_offset`.
* I add end position information to both CST and AST. Although it may be technically possible to avoid adding end positions to CST, the code becomes more cumbersome and less efficient.
* Since the end position is not known for non-leaf CST nodes while the next token is added, this requires a bit of extra care (see `_PyNode_FinalizeEndPos`). Unless I made some mistake, the algorithm should be linear.
* For statements, I "trim" the end position of suites to not include the terminal newlines and dedent (this seems to be what people would expect), for example in
```python
class C:
pass
pass
```
the end line and end column for the class definition is (2, 8).
* For `end_col_offset` I use the common Python convention for indexing, for example for `pass` the `end_col_offset` is 4 (not 3), so that `[0:4]` gives one the source code that corresponds to the node.
* I added a helper function `ast.get_source_segment()`, to get source text segment corresponding to a given AST node. It is also useful for testing.
An (inevitable) downside of this PR is that AST now takes almost 25% more memory. I think however it is probably justified by the benefits.
* Disable x87 control word for non-x86 targets
On msvc, x87 control word is only available on x86 target. Need to disable it for other targets to prevent compiling problems.
* Include immintrin.h on x86 and x64 only
Immintrin.h is only available on x86 and x64. Need to disable it for other targets to prevent compiling problems.
This change separates the signal handling trigger in the eval loop from the "pending calls" machinery. There is no semantic change and the difference in performance is insignificant.
The change makes both components less confusing. It also eliminates the risk of changes to the pending calls affecting signal handling. This is particularly relevant for some upcoming pending calls changes I have in the works.
Use crypt_r() when available instead of crypt() in the crypt module.
As a nice side effect: This also avoids a memory sanitizer flake as clang msan doesn't know about crypt's internal libc allocated buffer.
"Include/token.h", "Lib/token.py" (containing now some data moved from
"Lib/tokenize.py") and new files "Parser/token.c" (containing the code
moved from "Parser/tokenizer.c") and "Doc/library/token-list.inc" (included
in "Doc/library/token.rst") are now generated from "Grammar/Tokens" by
"Tools/scripts/generate_token.py". The script overwrites files only if
needed and can be used on the read-only sources tree.
"Lib/symbol.py" is now generated by "Tools/scripts/generate_symbol_py.py"
instead of been executable itself.
Added new make targets "regen-token" and "regen-symbol" which are now
dependencies of "regen-all".
The documentation contains now strings for operators and punctuation tokens.
Move tupleobject.h code surrounded by "#ifndef Py_LIMITED_API"
to a new Include/cpython/tupleobject.h header file.
Add cpython/ header files to Makefile.pre.in and pythoncore project
of PCbuild.
Fix the following clang warning:
Include/cpython/pystate.h:217:3: warning: redefinition of
typedef 'PyThreadState' is a C11 feature [-Wtypedef-redefinition]
* Move dictobject.h code surrounded by "#ifndef Py_LIMITED_API"
to a new Include/cpython/dictobject.h header file.
* Add PyAPI_FUNC() to _PyDictView_New().
* Reorganize dictobject.h: move views and iterators at the end.
* Move object.h code surrounded by "#ifndef Py_LIMITED_API"
to a new Include/cpython/object.h header file.
* "typedef struct _typeobject PyTypeObject;" is now always defined
in object.h, but if Py_LIMITED_API is not defined,
Include/cpython/object.h also defines the structure.
* Complete the printfunc comment to mention Py_LIMITED_API define.
Fix str.format(), float.__format__() and complex.__format__() methods
for non-ASCII decimal point when using the "n" formatter.
Changes:
* Rewrite _PyUnicode_InsertThousandsGrouping(): it now requires
a _PyUnicodeWriter object for the buffer and a Python str object
for digits.
* Rename FILL() macro to unicode_fill(), convert it to static inline function,
add "assert(0 <= start);" and rework its code.
Add "assert(PyTuple_Check(op));" to _PyTuple_CAST() to check that the
argument is a tuple object in debug mode.
PyTuple_GET_SIZE() now uses _PyTuple_CAST() to get its assertion.
Include/*.h should be the "portable Python API", whereas
Include/cpython/*.h should be the "CPython API": CPython
implementation details.
Changes:
* Create Include/cpython/ subdirectory
* "make install" now creates $prefix/include/cpython and copy
Include/cpython/* to $prefix/include/cpython
* Create Include/cpython/objimpl.h: move objimpl.h code
surrounded by "#ifndef Py_LIMITED_API" to cpython/objimpl.h.
* objimpl.h now includes cpython/objimpl.h
* Windows installer (MSI) now also install Include/ subdirectories:
Include/cpython/ and Include/internal/.
bpo-34523, bpo-35290: C locale coercion now resets the Python
internal "force ASCII" mode. This change fix the filesystem encoding
on FreeBSD CURRENT, which has a new "C.UTF-8" locale, when
the UTF-8 mode is disabled.
Add _Py_ResetForceASCII(): _Py_SetLocaleFromEnv() now calls it.
When iterating using asdl_seq_LEN(), use 'Py_ssize_t' type instead of
'int' for the iterator variable, to avoid downcast on 64-bit platforms.
_Py_asdl_int_seq_new() now also ensures that the index is greater than
or equal to 0.
* Add _PyObject_ASSERT_FROM() and _PyObject_ASSERT_FAILED_MSG()
macros.
* PyObject_GC_Track() now calls _PyObject_ASSERT_FAILED_MSG(),
instead of Py_FatalError(), if the object is already tracked, to
dump more information on error.
* _PyObject_GC_TRACK() no longer checks if the object is already
tracked at runtime, use an assertion instead for best performances;
PyObject_GC_Track() still checks at runtime.
* pycore_object.h now includes pycore_pystate.h.
* Convert _PyObject_GC_TRACK() and _PyObject_GC_UNTRACK() macros to
inline functions.
Partially revert commit 1a6be91e6f,
move back PyGC API from the internal API to the C API:
* _PyGCHead_NEXT(g), _PyGCHead_SET_NEXT(g, p)
* _PyGCHead_PREV(g), _PyGCHead_SET_PREV(g, p)
* _PyGCHead_FINALIZED(g), _PyGCHead_SET_FINALIZED(g)
* _PyGC_FINALIZED(o), _PyGC_SET_FINALIZED(o)
* _PyGC_PREV_MASK_FINALIZED
* _PyGC_PREV_MASK_COLLECTING
* _PyGC_PREV_SHIFT
* _PyGC_PREV_MASK
_PyObject_GC_TRACK(o) and _PyObject_GC_UNTRACK(o) remain in the
internal API.
locale.localeconv() now sets temporarily the LC_CTYPE locale to the
LC_MONETARY locale if the two locales are different and monetary
strings are non-ASCII. This temporary change affects other threads.
Changes:
* locale.localeconv() can now set LC_CTYPE to LC_MONETARY to decode
monetary fields.
* Add LocaleInfo.grouping_buffer: copy localeconv() grouping string
since it can be replaced anytime if a different thread calls
localeconv().
* _Py_GetLocaleconvNumeric() now requires a "struct lconv *"
structure, so locale.localeconv() now longer calls localeconv()
twice. Moreover, the function now requires all arguments to be
non-NULL.
* Rename STATIC_LOCALE_INFO_INIT to LocaleInfo_STATIC_INIT.
* Move _Py_GetLocaleconvNumeric() definition from fileutils.h
to pycore_fileutils.h. pycore_fileutils.h now includes locale.h.
* The _locale module is now built with Py_BUILD_CORE defined.
Rémi Lapeyre
Victor Stinner
Nick Coghlan
Zackery Spytz
Sergey Fedoseev
Steve Dower
Greg Price
Joannah Nanjekye
Jeroen Demeyer
Min ho Kim
Inada Naoki
Pablo Galindo
Hansraj Das
Michael Felt
David Carlier
Łukasz Langa
Eric Snow
Antoine Pitrou
Gregory P. Smith
Dino Viehland
MandarJKulkarni
Matthias Bussonnier
Eric V. Smith
Steve Dower
Jake Tesler
Michael J. Sullivan
Serhiy Storchaka
Victor Stinner
tyomitch
Paul Monson
Dmitry Marakasov
Eddie Elizondo
Guido van Rossum
Jeremy Kloth
pxinwr
Emily Morehouse
Ivan Levkivskyi
Minmin Gong
Arthur Neufeld