Py_SetPath() now sets sys.executable to the program full path
(Py_GetProgramFullPath()), rather than to the program name
(Py_GetProgramName()).
Fix also memory leaks in pathconfig_set_from_config().
* _PyConfig_InitPathConfig() now starts by copying the global path
configuration, and then override values set in PyConfig.
* _PyPathConfig_Calculate() implementations no longer override
_PyPathConfig fields which are already computed. For example,
if _PyPathConfig.prefix is not NULL, leave it unchanged.
* If Py_SetPath() has been called, _PyConfig_InitPathConfig() doesn't
call _PyPathConfig_Calculate() anymore.
* _PyPathConfig_Calculate() no longer uses PyConfig,
except to initialize PyCalculatePath structure.
* pathconfig_calculate(): remove useless temporary
"_PyPathConfig new_config" variable.
* calculate_module_search_path(): remove hack to workaround memory
allocation failure, call Py_FatalError() instead.
* Fix get_program_full_path(): handle memory allocation failure.
* If Py_SetPath() has been called, _PyConfig_InitPathConfig() now
uses its value.
* Py_Initialize() now longer copies path configuration from PyConfig
to the global path configuration (_Py_path_config).
The DLL path is not computed from any user configuration and cannot
be configured by PyConfig. Instead, add a new _Py_dll_path global variable.
Remove _PyConfig_SetPathConfig(): replaced with _PyPathConfig_Init().
Py_Initialize() now longer sets the "global path configuration",
but only initialize _Py_dll_path.
sys._base_executable is now always defined on all platforms, and can be overridden through configuration.
Also adds test.support.PythonSymlink to encapsulate platform-specific logic for symlinking sys.executable
* _PyPreConfig_GetGlobalConfig() and _PyCoreConfig_GetGlobalConfig()
now do nothing if the configuration was not initialized with
_PyPreConfig_InitCompatConfig() and _PyCoreConfig_InitCompatConfig()
* Remove utf8_mode=-2 special case: use utf8_mode=-1 instead.
* Fix _PyPreConfig_InitPythonConfig():
* isolated = 0 instead of -1
* use_environment = 1 instead of -1
* Rename _PyConfig_INIT to _PyConfig_INIT_COMPAT
* Rename _PyPreConfig_Init() to _PyPreConfig_InitCompatConfig()
* Rename _PyCoreConfig_Init() to _PyCoreConfig_InitCompatConfig()
* PyInterpreterState_New() now uses _PyCoreConfig_InitPythonConfig()
as default configuration, but it's very quickly overriden anyway.
* _freeze_importlib.c uses _PyCoreConfig_SetString() to set
program_name.
* Cleanup preconfig_init_utf8_mode(): cmdline is always non-NULL.
Add new functions to get the Python interpreter behavior:
* _PyPreConfig_InitPythonConfig()
* _PyCoreConfig_InitPythonConfig()
Add new functions to get an isolated configuration:
* _PyPreConfig_InitIsolatedConfig()
* _PyCoreConfig_InitIsolatedConfig()
Replace _PyPreConfig_INIT and _PyCoreConfig_INIT with new functions
_PyPreConfig_Init() and _PyCoreConfig_Init().
_PyCoreConfig: set configure_c_stdio and parse_argv to 0 by default
to behave as Python 3.6 in the default configuration.
_PyCoreConfig_Read() no longer sets coerce_c_locale_warn to 1 if it's
equal to 0. coerce_c_locale_warn must now be set to -1 (ex: using
_PyCoreConfig_InitPythonConfig()) to enable C locale coercion
warning.
Add unit tests for _PyCoreConfig_InitPythonConfig()
and _PyCoreConfig_InitIsolatedConfig().
Changes:
* Rename _PyCoreConfig_GetCoreConfig() to _PyPreConfig_GetCoreConfig()
* Fix core_read_precmdline(): handle parse_argv=0
* Fix _Py_PreInitializeFromCoreConfig(): pass coreconfig.argv
to _Py_PreInitializeFromPyArgv(), except if parse_argv=0
We cannot use "unsigned int" for exitcode on Windows, since
Py_Main() and _Py_RunMain() always return an "int".
Changes:
* _PyPathConfig_ComputeSysPath0() now returns -1 if an exception is
raised.
* pymain_run_python() no longer uses _PyInitError but display the
exception and set exitcode to 1 in case of error.
* Fix _Py_RunMain(): return an exitcode rather than calling
exit() on pymain_run_python() failure.
* _Py_ExitInitError() no longer uses ExitProcess() on Windows, use
exit() on all platforms.
* _Py_ExitInitError() now fails with a fatal error if 'err' is not an
error not an exit.
* _PyCoreConfig_Write() now updates _PyRuntime.preconfig
* Remove _PyPreCmdline_Copy()
* _PyPreCmdline_Read() now accepts _PyPreConfig and _PyCoreConfig
optional configurations.
* Rename _PyPreConfig_ReadFromArgv() to _PyPreConfig_Read(). Simplify
the code.
* Calling _PyCoreConfig_Read() no longer adds the warning options
twice: don't add a warning option if it's already in the list.
* Rename _PyCoreConfig_ReadFromArgv() to _PyCoreConfig_Read().
* Rename config_from_cmdline() to _PyCoreConfig_ReadFromArgv().
* Add more assertions on _PyCoreConfig in _PyCoreConfig_Read().
* Move some functions.
* Make some config functions private.
Prepare code to move some _PyPreConfig parameters into _PyPreCmdline.
Changes:
* _PyCoreConfig_ReadFromArgv(): remove preconfig parameter,
use _PyRuntime.preconfig.
* Add _PyPreCmdline_GetPreConfig() (called by _PyPreConfig_Read()).
* Rename _PyPreCmdline_Init() to _PyPreCmdline_SetArgv()
* Factorize _Py_PreInitializeFromPreConfig() code: add
pyinit_preinit().
* _PyPreConfig_Read() now sets coerce_c_locale to 2 if it must be
coerced.
* Remove _PyCoreConfig_ReadPreConfig().
* _PyCoreConfig_Write() now copies updated preconfig into _PyRuntime.
* _PyPathConfig_ComputeSysPath0() now returns 0 if argv is empty.
* Cleanup also _PyPathConfig_ComputeSysPath0() code: move variables
definitions closer to where they are used.
At Python initialization, the current directory is no longer
prepended to sys.path if it has been removed.
Rename _PyPathConfig_ComputeArgv0() to
_PyPathConfig_ComputeSysPath0() to avoid confusion between argv[0]
and sys.path[0].
Python initialization now fails if decoding pybuilddir.txt
configuration file fails at startup.
_PyPathConfig_Calculate() now reports memory allocation failure and
decoding error on decoding pybuilddir.txt content from
UTF-8/surrogateescape.
Replace messy _Py_wstrlist_xxx() functions with a new clean
_PyWstrList structure and new _PyWstrList_xxx() functions.
Changes:
* Add _PyCoreConfig.use_module_search_paths to decide if
_PyCoreConfig.module_search_paths should be computed or not, to
support empty search path list.
* _PyWstrList_Clear() sets length to 0 and items to NULL, whereas
_Py_wstrlist_clear() only freed memory.
* _PyWstrList_Append() returns an int, whereas _Py_wstrlist_append()
returned _PyInitError.
* _PyWstrList uses Py_ssize_t for the length, instead of int.
* Replace (int, wchar_t**) with _PyWstrList in:
* _PyPreConfig
* _PyCoreConfig
* _PyPreCmdline
* _PyCmdline
* Replace "int orig_argv; wchar_t **orig_argv;"
with "_PyWstrList orig_argv".
* _PyCmdline and _PyPreCmdline now also copy wchar_argv.
* Rename _PyArgv_Decode() to _PyArgv_AsWstrList().
* PySys_SetArgvEx() now pass the fixed (argc, argv) to
_PyPathConfig_ComputeArgv0() (don't pass negative argc or NULL
argv).
* _PyOS_GetOpt() uses Py_ssize_t
* Add _PyPreConfig structure
* Move 'ignored' and 'use_environment' fields from _PyCoreConfig
to _PyPreConfig
* Add a new "_PyPreConfig preconfig;" field to _PyCoreConfig
Add a new _Py_INIT_EXIT() macro to be able to exit Python with an
exitcode using _PyInitError API. Rewrite function calls by
pymain_main() to use _PyInitError.
Changes:
* Remove _PyMain.err and _PyMain.status field
* Add _Py_INIT_EXIT() macro and _PyInitError.exitcode field.
* Rename _Py_FatalInitError() to _Py_ExitInitError().
The whole coreconfig.h header is now excluded from Py_LIMITED_API.
Move functions definitions into a new internal pycore_coreconfig.h
header.
* Move Include/coreconfig.h to Include/cpython/coreconfig.h
* coreconfig.h header is now excluded from Py_LIMITED_API
* Move functions to pycore_coreconfig.h
Unicode version of Windows APIs are used in places, but not for GetVersionEx in Python/sysmodule.c
The wcstok_s is called on Windows in Modules/main.c and PC/launcher.c, but not in Python/pathconfig.c
* And pycore_lifecycle.h and pycore_pathconfig.h headers to
Include/internal/
* Move Py_BUILD_CORE specific code from coreconfig.h and
pylifecycle.h to pycore_pathconfig.h and pycore_lifecycle.h
* Move _Py_wstrlist_XXX() definitions and _PyPathConfig code
from pycore_state.h to pycore_pathconfig.h
* Move "Init" and "Fini" function definitions from pylifecycle.c to
pycore_lifecycle.h.
* If _Py_InitializeCore() is called twice, the second call now copies
and apply (partially) the new configuration.
* Rename _Py_CommandLineDetails to _PyCmdline
* Move more code into pymain_init(). The core configuration created
by Py_Main() is new destroyed before running Python to reduce the
memory footprint.
* _Py_InitializeCore() now returns the created interpreter.
_Py_InitializeMainInterpreter() now expects an interpreter.
* Remove _Py_InitializeEx_Private(): _freeze_importlib now uses
_Py_InitializeFromConfig()
* _PyCoreConfig_InitPathConfig() now only computes the path
configuration if needed.
* _PyCoreConfig: add isolated and site_import attributes
* Replace Py_IgnoreEnvironment with config->ignore_environment when
reading the current configuration
* _PyCoreConfig_Read() now sets ignore_environment, utf8_mode,
isolated and site_import from Py_IgnoreEnvironment, Py_UTF8Mode,
Py_IsolatedFlag and Py_NoSiteFlag
* _Py_InitializeCore() now sets Py_xxx flags from the configuration
* pymain_read_conf() now uses _PyCoreConfig_Copy() to save/restore
the configuration.
* Rename _disable_importlib of _PyCoreConfig to _install_importlib
* _PyCoreConfig_SetGlobalConfig() now also set
Py_HashRandomizationFlag
* Replace !Py_NoSiteFlag with core_config->site_import
* _PyCoreConfig_Read() no longer directly modifies Py_IsolatedFlag
and Py_NoSiteFlag global configuration flags. The function now
requires two pointers to integer, so these flags can be set later,
to avoid side effets in _PyCoreConfig_Read().
* pathconfig_global_init() now leaves Py_IsolatedFlag and
Py_NoSiteFlag unchanged.
* Fix pathconfig_global_init(): avoid computing the path
configuration twice, use _PyCoreConfig_SetPathConfig().
Rework _PyCoreConfig_Read() function which *reads* core configuration
to not *modify* the path configuration.
A new _PyCoreConfig_SetPathConfig() function now recreates the path
configuration from the core configuration. This function is now
called very late in _Py_InitializeCore(), just before calling
initimport().
Changes:
* Add _PyCoreConfig.dll_path
* Py_SetPath() now fails with a fatal python error on memory
allocation failure.
* Rename _PyPathConfig_Calculate() to _PyPathConfig_Calculate_impl()
* Replace _PyPathConfig_Init() with _PyPathConfig_Calculate(): the
function now requires a _PyPathConfig
* Add _PyPathConfig_SetGlobal() to set the _Py_path_config global
variable.
* Add _PyCoreConfig_InitPathConfig(): compute the path configuration
* Add _PyCoreConfig_SetPathConfig(): set path configuration from core
configuration
* Rename wstrlist_append() to _Py_wstrlist_append()
* _Py_wstrlist_append() now handles integer overflow.
Historically, -m added the empty string as sys.path
zero, meaning it resolved imports against the current
working directory, the same way -c and the interactive
prompt do.
This changes the sys.path initialisation to add the
*starting* working directory as sys.path[0] instead,
such that changes to the working directory while the
program is running will have no effect on imports
when using the -m switch.
* Use wider types (int => Py_ssize_t) to avoid integer overflows.
* Fix gc.get_freeze_count(): use Py_ssize_t type rather than int, since gc_list_size() returns a Py_ssize_t.
Modify locale.localeconv(), time.tzname, os.strerror() and other
functions to ignore the UTF-8 Mode: always use the current locale
encoding.
Changes:
* Add _Py_DecodeLocaleEx() and _Py_EncodeLocaleEx(). On decoding or
encoding error, they return the position of the error and an error
message which are used to raise Unicode errors in
PyUnicode_DecodeLocale() and PyUnicode_EncodeLocale().
* Replace _Py_DecodeCurrentLocale() with _Py_DecodeLocaleEx().
* PyUnicode_DecodeLocale() now uses _Py_DecodeLocaleEx() for all
cases, especially for the strict error handler.
* Add _Py_DecodeUTF8Ex(): return more information on decoding error
and supports the strict error handler.
* Rename _Py_EncodeUTF8_surrogateescape() to _Py_EncodeUTF8Ex().
* Replace _Py_EncodeCurrentLocale() with _Py_EncodeLocaleEx().
* Ignore the UTF-8 mode to encode/decode localeconv(), strerror()
and time zone name.
* Remove PyUnicode_DecodeLocale(), PyUnicode_DecodeLocaleAndSize()
and PyUnicode_EncodeLocale() now ignore the UTF-8 mode: always use
the "current" locale.
* Remove _PyUnicode_DecodeCurrentLocale(),
_PyUnicode_DecodeCurrentLocaleAndSize() and
_PyUnicode_EncodeCurrentLocale().
Add a new _Py_FindEnvConfigValue() function: code shared between
Windows and Unix implementations of _PyPathConfig_Calculate() to read
the pyenv.cfg file.
_Py_FindEnvConfigValue() now uses _Py_DecodeUTF8_surrogateescape()
instead of using a Python Unicode string, the Python API must not be
used early during Python initialization. Same change in Unix
search_for_exec_prefix(): use _Py_DecodeUTF8_surrogateescape().
Cleanup also encode_current_locale(): PyMem_RawFree/PyMem_Free can be
called with NULL.
Fix also "NUL byte" => "NULL byte" typo.
Merge _PyCoreConfig_ReadEnv() into _PyCoreConfig_Read(), and
_Py_CommandLineDetails usage is now restricted to pymain_cmdline().
Changes:
* _PyCoreConfig: Add nxoption, xoptions, nwarnoption and warnoptions
* Add _PyCoreConfig.program: argv[0] or ""
* Move filename, command, module and xoptions from
_Py_CommandLineDetails to _PyMain. xoptions _Py_OptList becomes
(int, wchar_t**) list.
* Add pymain_cmdline() function
* Rename copy_argv() to copy_wstrlist(). Rename clear_argv() to
clear_wstrlist(). Remove _Py_OptList structure: use (int,
wchar_t**) list instead.
* Rename pymain_set_flag_from_env() to pymain_get_env_flag()
* Rename pymain_set_flags_from_env() to pymain_get_env_flags()
* _PyMainInterpreterConfig_Read() now creates the warnoptions from
_PyCoreConfig.warnoptions
* Inline pymain_add_warning_dev_mode() and
pymain_add_warning_bytes_flag() into config_init_warnoptions()
* Inline pymain_get_program_name() into _PyCoreConfig_Read()
* _Py_CommandLineDetails: Replace warning_options with nwarnoption
and warnoptions. Replace env_warning_options with nenv_warnoption
and env_warnoptions.
* pymain_warnings_envvar() now has a single implementation for
Windows and Unix: use config_get_env_var_dup() to also get the
variable as wchar_t* on Unix.
_PyMainInterpreterConfig now contains Python objects, whereas
_PyCoreConfig contains wchar_t* strings.
Core config:
* Rename _PyMainInterpreterConfig_ReadEnv() to _PyCoreConfig_ReadEnv()
* Move 3 strings from _PyMainInterpreterConfig to _PyCoreConfig:
module_search_path_env, home, program_name.
* Add _PyCoreConfig_Clear()
* _PyPathConfig_Calculate() now takes core config rather than main
config
* _PyMainInterpreterConfig_Read() now requires also a core config
Main config:
* Add _PyMainInterpreterConfig.module_search_path: sys.path list
* Add _PyMainInterpreterConfig.argv: sys.argv list
* _PyMainInterpreterConfig_Read() now computes module_search_path
Changes:
* Split _PySys_SetArgvWithError() into subfunctions for Py_Main():
* Create the Python list object
* Set sys.argv to the list
* Compute argv0
* Prepend argv0 to sys.path
* Add _PyPathConfig_ComputeArgv0()
* Remove _PySys_SetArgvWithError()
* Py_Main() now splits the code to compute sys.argv/path0 and the
code to update the sys module: add pymain_compute_argv()
subfunction.
_PyPathConfig_Init() now also initialize home and program_name:
* Rename existing _PyPathConfig_Init() to _PyPathConfig_Calculate().
Add a new _PyPathConfig_Init() function in pathconfig.c which
handles the _Py_path_config variable and call
_PyPathConfig_Calculate().
* Add home and program_name fields to _PyPathConfig.home
* _PyPathConfig_Init() now initialize home and program_name
from main_config
* Py_SetProgramName(), Py_SetPythonHome() and Py_GetPythonHome() now
calls Py_FatalError() on failure, instead of silently ignoring
failures.
* config_init_home() now gets directly _Py_path_config.home to only
get the value set by Py_SetPythonHome(), or NULL if
Py_SetPythonHome() was not called.
* config_get_program_name() now gets directly
_Py_path_config.program_name to only get the value set by
Py_SetProgramName(), or NULL if Py_SetProgramName() was not called.
* pymain_init_python() doesn't call Py_SetProgramName() anymore,
_PyPathConfig_Init() now always sets the program name
* Call _PyMainInterpreterConfig_Read() in
pymain_parse_cmdline_envvars_impl() to control the memory allocator
* C API documentation: it's no more safe to call Py_GetProgramName()
before Py_Initialize().
* Factorize code from PC/getpathp.c and Modules/getpath.c to remove
duplicated code
* rename pathconfig_clear() to _PyPathConfig_Clear()
* Inline _PyPathConfig_Fini() in pymain_impl() and then remove it,
since it's a oneliner
Victor Stinner
Zackery Spytz
Steve Dower
Minmin Gong
Steve Dower
Nick Coghlan
Victor Stinner
Serhiy Storchaka