ceval.c:
define recurion_limit (static), default value is 2500
define Py_GetRecursionLimit and Py_SetRecursionLimit
raise RuntimeError if limit is exceeded
PC/config.h:
remove plat-specific definition
sysmodule.c:
add sys.(get|set)recursionlimit
how 'import' was called with a compiletime mechanism: create either a tuple
of the import arguments, or None (in the case of a normal import), add it to
the code-block constants, and load it onto the stack before calling
IMPORT_NAME.
PyRun_FileEx(). These are the same as their non-Ex counterparts but
have an extra argument, a flag telling them to close the file when
done.
Then this is used by Py_Main() and execfile() to close the file after
it is parsed but before it is executed.
Adding APIs seems strange given the feature freeze but it's the only
way I see to close the bug report without incompatible changes.
[ Bug #110616 ] source file stays open after parsing is done (PR#209)
(This fix is a bit broken, just as the test already was: the test for
testlist and listmaker are done always, whereas the test for exprlist and
the actual abort() are only done if Py_DEBUG is defined. Suggestions
welcome, I guess ;)
Add the EXTENDED_ARG opcode to the virtual machine, allowing 32-bit
arguments to opcodes instead of being forced to stick to the 16-bit
limit. This is especially useful for machine-generated code, which
can be too long for the SET_LINENO parameter to fit into 16 bits.
This closes the implementation portion of SourceForge patch #100893.
- Fix bug in thread_pthread.h::PyThread_get_thread_ident() where
sizeof(pthread) < sizeof(long).
- Add 'configure' for:
- SIZEOF_PTHREAD is pthread_t can be included via <pthread.h>
- setting Monterey system name
- appropriate CC,LINKCC,LDSHARED,OPT, and CCSHARED for Monterey
- Add section in README for Monterey build
eval_code2(): Implement new bytecodes PRINT_ITEM_TO and
PRINT_NEWLINE_TO, as per accepted SF patch #100970.
Also update graminit.c based on related Grammar/Grammar changes.
trying hard enough to find out what the arguments to an import were. There
is no test-case for this bug, yet, but this is what it looked like:
from encodings import cp1006, cp1026
ImportError: cannot import name cp1026
'__import__' was called with only the first name in the 'arguments' list.
load mod.submod as m, or mod as m ? Both can be achieved differently, and
unambiguously. Also attempt to document this restriction (editor
appreciated!)
Note that this is an artificial check during compile, because incorporating
this in the grammar is hard, and then adjusting the compiler to do the right
thing with the right nodes is harder.
scope. Previously, s_buffer[] was defined inside the
PyUnicode_Check() scope, but referred to in the outer scope via
assignment to s. This quiets an Insure portability warning.
name as n'. By doing some twists and turns, "as" is not a reserved word.
There is a slight change in semantics for 'from module import name' (it will
now honour the 'global' keyword) but only in cases that are explicitly
undocumented.
First, the allocated buffer was never freed after using it to create
the PyString object. Second, it was possible that have_filename would
be false (meaning that filename was not a PyString object), but that
the code would still try to PyString_GET_SIZE() it.
in binascii.c (only on platforms with signed chars -- although Py_CHARMASK
is documented as returning an int, it only does so on platforms with
signed chars).
returning a pointer to the start of the file's "base" name;
similar to os.path.basename().
SyntaxError__str__(): Use my_basename() to keep the length of the
file name included in the exception message short.
filename and lineno attributes, but do not mask the SyntaxError if we
fail.
This is part of what is needed to close SoruceForge bug #110628
(Jitterbug PR#278).
Wrap a long line to fit in under 80 columns.
filename and lineno attributes, but do not mask the SyntaxError if we
fail.
This is part of what is needed to close SoruceForge bug #110628
(Jitterbug PR#278).
than depending on the site that raises the exception. If the
filename and lineno attributes are set on the exception object,
use them to augment the message displayed.
This is part of what is needed to close SoruceForge bug #110628
(Jitterbug PR#278).
string literals has not been tested on an MS_WIN16 platform; the trailing
";" was inside the #ifndef MS_WIN16, which should cause an error (missing
semi-colon) when compiled with that symbol #defined.
did the same anyway.
I'm not sure what to do with Tools/compiler/compiler/* -- that isn't part of
distutils, is it ? Should it try to be compatible with old bytecode version ?
-32768..65535 is acceptable. Added B specifier (with values from
-128..255). No L added (which would have completed the set) because l
already accepts any value (and the letter L is taken for quadwords).
python-dev discussion.
This should catch future version incompatibilities on Windows. Alas,
this doesn't help for 1.5 vs. 1.6; but it will help for 1.6 vs. 2.0.
the Python Unicode implementation.
The internal buffer used for implementing the buffer protocol
is renamed to defenc to make this change visible. It now holds the
default encoded version of the Unicode object and is calculated
on demand (NULL otherwise).
Since the default encoding defaults to ASCII, this will mean that
Unicode objects which hold non-ASCII characters will no longer
work on C APIs using the "s" or "t" parser markers. C APIs must now
explicitly provide Unicode support via the "u", "U" or "es"/"es#"
parser markers in order to work with non-ASCII Unicode strings.
(Note: this patch will also have to be applied to the 1.6 branch
of the CVS tree.)
accepted by the BDFL.
builtin_zip(): New function to implement the zip() function described
in the above proposal.
zip_doc[]: Docstring for zip().
builtin_methods[]: added entry for zip()
for systems that are missing those declarations from system include files.
Start by moving a pointy-haired ones from their previous locations to the
new section.
(The gethostname() one, for instance, breaks on several systems, because
some define it as (char *, size_t) and some as (char *, int).)
I purposely decided not to include the summary of used #defines like Tim did
in the first section of pyport.h. In my opinion, the number of #defines
likedly to be used by this section would make such an overview unwieldy. I
would suggest documenting the non-obvious ones, though.
good C practice hasn't been available to everything all along.
Added Py_SAFE_DOWNCAST(VALUE, WIDE, NARROW) macro to pyport.h; this
just casts VALUE from type WIDE to type NARROW, but assert-fails if
Py_DEBUG is defined and info is lost due to casting.
Replaced a line in Fredrik's fix to marshal.c to use the new macro.
MAGIC number. When updating it next time, be sure it's higher than 50715 *
constants. (Shouldn't be a problem if everyone keeps to the proper
algorithm.)
comments, docstrings or error messages. I fixed two minor things in
test_winreg.py ("didn't" -> "Didn't" and "Didnt" -> "Didn't").
There is a minor style issue involved: Guido seems to have preferred English
grammar (behaviour, honour) in a couple places. This patch changes that to
American, which is the more prominent style in the source. I prefer English
myself, so if English is preferred, I'd be happy to supply a patch myself ;)
used for indentation related errors. This patch includes Ping's
improvements for indentation-related error messages.
Closes SourceForge patches #100734 and #100856.
This adds support for instance to the constructor (instances
have to define __str__ and can return Unicode objects via that
hook; string return values are decoded into Unicode using the
current default encoding).
The common technique for printing out a pointer has been to cast to a long
and use the "%lx" printf modifier. This is incorrect on Win64 where casting
to a long truncates the pointer. The "%p" formatter should be used instead.
The problem as stated by Tim:
> Unfortunately, the C committee refused to define what %p conversion "looks
> like" -- they explicitly allowed it to be implementation-defined. Older
> versions of Microsoft C even stuck a colon in the middle of the address (in
> the days of segment+offset addressing)!
The result is that the hex value of a pointer will maybe/maybe not have a 0x
prepended to it.
Notes on the patch:
There are two main classes of changes:
- in the various repr() functions that print out pointers
- debugging printf's in the various thread_*.h files (these are why the
patch is large)
Closes SourceForge patch #100505.
This patch fixes possible overflow in the use of
PyOS_GetLastModificationTime in getmtime.c and Python/import.c.
Currently PyOS_GetLastModificationTime returns a C long. This can
overflow on Win64 where sizeof(time_t) > sizeof(long). Besides it
should logically return a time_t anyway (this patch changes this).
As well, import.c uses PyOS_GetLastModificationTime for .pyc
timestamping. There has been recent discussion about the .pyc header
format on python-dev. This patch adds oveflow checking to import.c so
that an exception will be raised if the modification time
overflows. There are a few other minor 64-bit readiness changes made
to the module as well:
- size_t instead of int or long for function-local buffer and string
length variables
- one buffer overflow check was added (raises an exception on possible
overflow, this overflow chance exists on 32-bit platforms as well), no
other possible buffer overflows existed (from my analysis anyway)
Closes SourceForge patch #100509.
The common technique for printing out a pointer has been to cast to a long
and use the "%lx" printf modifier. This is incorrect on Win64 where casting
to a long truncates the pointer. The "%p" formatter should be used instead.
The problem as stated by Tim:
> Unfortunately, the C committee refused to define what %p conversion "looks
> like" -- they explicitly allowed it to be implementation-defined. Older
> versions of Microsoft C even stuck a colon in the middle of the address (in
> the days of segment+offset addressing)!
The result is that the hex value of a pointer will maybe/maybe not have a 0x
prepended to it.
Notes on the patch:
There are two main classes of changes:
- in the various repr() functions that print out pointers
- debugging printf's in the various thread_*.h files (these are why the
patch is large)
Closes SourceForge patch #100505.
This patch fixes a problem on AIX with the signed int case code in
getargs.c, after Trent Mick's intervention about MIN/MAX overflow
checks. The AIX compiler/optimizer generates bogus code with the
default flags "-g -O" causing test_builtin to fail: int("10", 16) <>
16L. Swapping the two checks in the signed int code makes the problem
go away.
Also, make the error messages fit in 80 char lines in the
source.
The depth field was never decremented inside w_object(), and it was
never initialized in PyMarshal_WriteObjectToFile().
This caused imports from .pyc files to fil mysteriously when the .pyc
file was written by the broken code -- w_object() would bail out
early, but PyMarshal_WriteObjectToFile() doesn't check the error or
return an error code, and apparently the marshalling code doesn't call
PyErr_Check() either. (That's a separate patch if I feel like it.)
Various small fixes to the builtin module to ensure no buffer
overflows.
- chunk #1:
Proper casting to ensure no truncation, and hence no surprises, in the
comparison.
- chunk #2:
The id() function guarantees a unique return value for different
objects. It does this by returning the pointer to the object. By
returning a PyInt, on Win64 (sizeof(long) < sizeof(void*)) the pointer
is truncated and the guarantee may be proven false. The appropriate
return function is PyLong_FromVoidPtr, this returns a PyLong if that
is necessary to return the pointer without truncation.
[GvR: note that this means that id() can now return a long on Win32
platforms. This *might* break some code...]
- chunk #3:
Ensure no overflow in raw_input(). Granted the user would have to pass
in >2GB of data but it *is* a possible buffer overflow condition.
As I really do not have anything better to do at the moment, I have written
a patch to Python/marshal.c that prevents Python dumping core when trying
to marshal stack bustingly deep (or recursive) data structure.
It just throws an exception; even slightly clever handling of recursive
data is what pickle is for...
[Fred Drake:] Moved magic constant 5000 to a #define.
This closes SourceForge patch #100645.
the number of children of a node exceeds the max possible value for
the short that is used to count them. The Python runtime converts
this parser error into the SyntaxError "expression too long."
module and into _exceptions.c. This includes all the PyExc_* globals,
the bltin_exc table, init_class_exc(), fini_instances(),
finierrors().
Renamed _PyBuiltin_Init_1() to _PyBuiltin_Init() since the two phase
initializations are necessary any more.
Removed as obsolete _PyBuiltin_Init_2(), _PyBuiltin_Fini_1() and
_PyBuiltin_Fini_2().
need two phase init or fini of the builtin module. Change the call of
_PyBuiltin_Init_1() to _PyBuiltin_Init(). Add a call to
init_exceptions().
Py_Finalize(): Don't call _PyBuiltin_Fini_1(). Instead call
fini_exceptions() but move this to before the thread state is
cleared.
Limit the 'b' formatter of PyArg_ParseTuple to valid values of an unsigned
char, i.e. [0,UCHAR_MAX]. It is expected that this is the common usage of 'b'.
An OverflowError is raised if the parsed value is outside this range.
Changes the 'b', 'h', and 'i' formatters in PyArg_ParseTuple to raise an
Overflow exception if they overflow (previously they just silently
overflowed).
Changes by Guido: always accept values [0..255] (in addition to
[CHAR_MIN..CHAR_MAX]) for 'b' format; changed some spaces into tabs in
other code.
who wrote:
Here's the new version of thread_nt.h. More particular, there is a
new version of thread lock that uses kernel object (e.g. semaphore)
only in case of contention; in other case it simply uses interlocked
functions, which are faster by the order of magnitude. It doesn't
make much difference without threads present, but as soon as thread
machinery initialised and (mostly) the interpreter global lock is on,
difference becomes tremendous. I've included a small script, which
initialises threads and launches pystone. With original thread_nt.h,
Pystone results with initialised threads are twofold worse then w/o
threads. With the new version, only 10% worse. I have used this
patch for about 6 months (with threaded and non-threaded
applications). It works remarkably well (though I'd desperately
prefer Python was free-threaded; I hope, it will soon).
For more comments, read the patches@python.org archives.
For documentation read the comments in mymalloc.h and objimpl.h.
(This is not exactly what Vladimir posted to the patches list; I've
made a few changes, and Vladimir sent me a fix in private email for a
problem that only occurs in debug mode. I'm also holding back on his
change to main.c, which seems unnecessary to me.)
- When 'import exceptions' fails, don't suggest to use -v to print the traceback;
this doesn't actually work.
- Remove comment about fallback to string exceptions.
- Remove a PyErr_Occurred() check after all is said and done that can
never trigger.
- Remove static function newstdexception() which is no longer called.
Added 'u' and 'u#' tags for PyArg_ParseTuple - these turn a
PyUnicodeObject argument into a Py_UNICODE * buffer, or a Py_UNICODE *
buffer plus a length with the '#'. Also added an analog to 'U'
for Py_BuildValue.
return 0 (exceptions don't match). This means that if an ImportError
is raised because exceptions.py can't be imported, the interpreter
will exit "cleanly" with an error message instead of just core
dumping.
PyErr_SetFromErrnoWithFilename(), PyErr_SetFromWindowsErrWithFilename():
Don't test on Py_UseClassExceptionsFlag.
are no longer supported (i.e. -X option is removed).
_PyBuiltin_Init_1(): Don't call initerrors(). This does mean that it
is possible to raise an ImportError before that exception has been
initialized, say because exceptions.py can't be found, or contains
bogosity. See changes to errors.c for how this is handled.
_PyBuiltin_Init_2(): Don't test Py_UseClassExceptionsFlag, just go
ahead and initialize the class-based standard exceptions. If this
fails, we throw a Py_FatalError.
Changed all references to the MAGIC constant to use a global
pyc_magic instead. This global is initially set to MAGIC, but can be
changed by the _PyImport_Init() function to provide for
special features implemented in the compiler which are settable
using command line switches and affect the way PYC files are
generated.
Currently this change is only done for the -U flag.
Support for the new -U command line option option:
with the option enabled the Python compiler
interprets all "..." strings as u"..." (same with r"..." and
ur"...").
Follow a suggestion in an /*XXX*/ comment [in com_add()] to speed up
compilation by using supplemental dictionaries to keep track of names
and constants, eliminating quadratic behavior. With this patch in
place, the time to import a 5000-line file with lots of constants [at
the global level] is reduced from 20 seconds to under 3 on my system.
Here's a patch which changes modsupport to add 'u' and 'u#',
to support building Unicode objects from a null-terminated
Py_UNICODE *, and a Py_UNICODE * with length, respectively.
[Conversion from 'U' to 'u' by Fred, based on python-dev comments.]
Note that the use of None for NULL values of the Py_UNICODE* value is
still in; I'm not sure of the conclusion on that issue.
remaining object references if the environment variable PYTHONDUMPREFS
exists. The default behaviour caused problems for background or
otherwise invisible processes that use the debug build of Python.
Fixed a memory leak found by Fredrik Lundh. Instead of
PyUnicode_AsUTF8String() we now use _PyUnicode_AsUTF8String() which
returns the string object without incremented refcount (and assures
that the so obtained object remains alive until the Unicode object is
garbage collected).
"""
Running "test_extcall" repeatedly results in memory leaks.
One of these can't be fixed (at least not easily!), it happens since
this code:
def saboteur(**kw):
kw['x'] = locals()
d = {}
saboteur(a=1, **d)
creates a circular reference - d['x']['d']==d
The others are due to some missing decrefs in ceval.c, fixed by the
patch attached below.
Note: I originally wrote this without the "goto", just adding the
missing decref's where needed. But I think the goto is justified in
keeping the executable code size of ceval as small as possible.
"""
[I think the circular reference is more like kw['x']['kw'] == kw. --GvR]
Added special case to unicode(): when being passed a
Unicode object as first argument, return the object as-is.
Raises an exception when given a Unicode object *and* an
encoding name.
comparing code objects. This give sless surprising results in
-Optimized code. It also sorts code objects by name, now.
[I changed the patch to hash() slightly to touch fewer lines.]
his copy of test_contains.py seems to be broken -- the lines he
deleted were already absent). Checkin messages:
New Unicode support for int(), float(), complex() and long().
- new APIs PyInt_FromUnicode() and PyLong_FromUnicode()
- added support for Unicode to PyFloat_FromString()
- new encoding API PyUnicode_EncodeDecimal() which converts
Unicode to a decimal char* string (used in the above new
APIs)
- shortcuts for calls like int(<int object>) and float(<float obj>)
- tests for all of the above
Unicode compares and contains checks:
- comparing Unicode and non-string types now works; TypeErrors
are masked, all other errors such as ValueError during
Unicode coercion are passed through (note that PyUnicode_Compare
does not implement the masking -- PyObject_Compare does this)
- contains now works for non-string types too; TypeErrors are
masked and 0 returned; all other errors are passed through
Better testing support for the standard codecs.
Misc minor enhancements, such as an alias dbcs for the mbcs codec.
Changes:
- PyLong_FromString() now applies the same error checks as
does PyInt_FromString(): trailing garbage is reported
as error and not longer silently ignored. The only characters
which may be trailing the digits are 'L' and 'l' -- these
are still silently ignored.
- string.ato?() now directly interface to int(), long() and
float(). The error strings are now a little different, but
the type still remains the same. These functions are now
ready to get declared obsolete ;-)
- PyNumber_Int() now also does a check for embedded NULL chars
in the input string; PyNumber_Long() already did this (and
still does)
Followed by:
Looks like I've gone a step too far there... (and test_contains.py
seem to have a bug too).
I've changed back to reporting all errors in PyUnicode_Contains()
and added a few more test cases to test_contains.py (plus corrected
the join() NameError).
If a non-tuple sequence is passed as the *arg, convert it to a tuple
before checking its length.
If named keyword arguments are used in combination with **kwargs, make
a copy of kwargs before inserting the new keys.
the return value of PySequence_Length(). If an exception occurred,
the returned length will be -1. Make sure this doesn't get obscurred,
and that the bogus length isn't used.
executive summary:
Instead of typing 'apply(f, args, kwargs)' you can type 'f(*arg, **kwargs)'.
Some file-by-file details follow.
Grammar/Grammar:
simplify varargslist, replacing '*' '*' with '**'
add * & ** options to arglist
Include/opcode.h & Lib/dis.py:
define three new opcodes
CALL_FUNCTION_VAR
CALL_FUNCTION_KW
CALL_FUNCTION_VAR_KW
Python/ceval.c:
extend TypeError "keyword parameter redefined" message to include
the name of the offending keyword
reindent CALL_FUNCTION using four spaces
add handling of sequences and dictionaries using extend calls
fix function import_from to use PyErr_Format
The attached patch set includes a workaround to get Python with
Unicode compile on BSDI 4.x (courtesy Thomas Wouters; the cause
is a bug in the BSDI wchar.h header file) and Python interfaces
for the MBCS codec donated by Mark Hammond.
Also included are some minor corrections w/r to the docs of
the new "es" and "es#" parser markers (use PyMem_Free() instead
of free(); thanks to Mark Hammond for finding these).
The unicodedata tests are now in a separate file
(test_unicodedata.py) to avoid problems if the module cannot
be found.
Attached you find the latest update of the Unicode implementation.
The patch is against the current CVS version.
It includes the fix I posted yesterday for the core dump problem
in codecs.c (was introduced by my previous patch set -- sorry),
adds more tests for the codecs and two new parser markers
"es" and "es#".
Andy Robinson noted a core dump in the codecs.c file. This
was introduced by my latest patch which fixed a memory leak
in codecs.c. The bug causes all successful codec lookups to fail.
Attached you find an update of the Unicode implementation.
The patch is against the current CVS version. I would appreciate
if someone with CVS checkin permissions could check the changes
in.
The patch contains all bugs and patches sent this week and also
fixes a leak in the codecs code and a bug in the free list code
for Unicode objects (which only shows up when compiling Python
with Py_DEBUG; thanks to MarkH for spotting this one).
Added wrapping macros to dictobject.c, listobject.c, tupleobject.c,
frameobject.c, traceback.c that safely prevends core dumps
on stack overflow. Macros and functions in object.c, object.h.
The method is an "elevator destructor" that turns cascading
deletes into tail recursive behavior when some limit is hit.
* Changes to a recent patch by Chris Tismer to errors.c. Chris' patch
always used FormatMessage() to get the error message passing the error code
from errno - but errno and FormatMessage use a different numbering scheme.
The main reason the patch looked OK was that ENOFILE==ERROR_FILE_NOT_FOUND -
but that is about the only shared error code :-). The MS CRT docs tell you
to use _sys_errlist()/_sys_nerr. My patch does also this, and adds a very
similar function specifically for win32 error codes.
PR#175 -- when exec is passed a code object, it didn't sync the locals
from the dictionary back into their fast representation.
Also took the time to remove some repetitive code there and to do the
syncing even when an exception is raised (since a partial effect
should still be synced).
* in import.c, #ifdef out references to dynamic loading based on
HAVE_DYNAMIC_LOADING
* clean out the platform-specific crud from importdl.c.
[ maybe fold this function into import.c and drop the importdl.c file? Greg.]
* change GetDynLoadFunc's "funcname" parameter to "shortname". change
"name" to "fqname" for clarification.
* each GetDynLoadFunc now creates its own funcname value.
WARNING: as I mentioned previously, we may run into an issue with a
missing "_" on some platforms. Testing will show this pretty quickly,
however.
* move pathname munging into dynload_shlib.c
Here's a patch that avoids a warning caused by the "const char* pathname"
declaration for _PyImport_GetDynLoadFunc (in dynload_aix). The "aix_load"
function's 1st arg is prototyped as "char *pathname".
file per platform (really: per style of Dl API; e.g. all platforms
using dlopen() are grouped together in dynload_shlib.c.).
This is part of a set of patches by Greg Stein.
Duzan, for AIX, to support C++ objects with static initializers, when
using the genuine IBM C++ compiler (namely xlC/xlC_r).
See accompanying patches to configure.in and acconfig.h.
not as descriptive as what Barry suggests, but this also catches the
(in my opinion important) case where some other C code besides apply()
constructs a kwdict that doesn't have the right format. All the other
possibilities of getting it wrong (non-dict, wrong keywords etc) are
already caught so this makes sense to check here.
For a long time I've seen absurd tracebacks under -O (e.g., negative
line numbers), but very rarely. Since I was looking at tracebacks
anyway, thought I'd track it down. Turns out to be Guido's only
predictable blind spot <wink -- "char" is signed on some non-GvR
systems>. Patch follows.
tracefunc (or profilefunc -- we're not sure which), zap the global
trace and profile funcs so that we can't get into recursive loop when
instantiating the resulting class based exception.
"""
Following up Robin Dunn's troubles with freeze, here's a patch that
fixes an oddity regarding the import logic of shared modules on AIX.
Symbol resolution of shared modules is now handled properly for the cases
when the python library is linked to a binary with an arbitrary name.
This includes the standard python[version] executable, but also applications
that are embedding the python core (i.e. linked with libpython[version].a,
the latter being static or shared).
"""
Introduce a new builtin exception, UnboundLocalError, raised when ceval.c
tries to retrieve or delete a local name that isn't bound to a value.
Currently raises NameError, which makes this behavior a FAQ since the same
error is raised for "missing" global names too: when the user has a global
of the same name as the unbound local, NameError makes no sense to them.
Even in the absence of shadowing, knowing whether a bogus name is local or
global is a real aid to quick understanding.
Example:
D:\src\PCbuild>type local.py
x = 42
def f():
print x
x = 13
return x
f()
D:\src\PCbuild>python local.py
Traceback (innermost last):
File "local.py", line 8, in ?
f()
File "local.py", line 4, in f
print x
UnboundLocalError: x
D:\src\PCbuild>
Note that UnboundLocalError is a subclass of NameError, for compatibility
with existing class-exception code that may be trying to catch this as a
NameError. Unfortunately, I see no way to make this wholly compatible
with -X (see comments in bltinmodule.c): under -X, [UnboundLocalError
is an alias for NameError --GvR].
[The ceval.c patch differs slightly from the second version that Tim
submitted; I decided not to raise UnboundLocalError for DELETE_NAME,
only for DELETE_LOCAL. DELETE_NAME is only generated at the module
level, and since at that level a NameError is raised for referencing
an undefined name, it should also be raised for deleting one.]
We occasionally received reports from people getting "invalid tstate"
crashes (this is a fatal error in PyThreadState_Delete()). Finally
several people were able to reproduce it reliably and Tim Peters
discovered that there is a race condition when multiple threads are
calling this function without holding the global interpreter lock (the
function may be called without holding that).
Solved the race condition by adding a lock around the mutating uses of
interp->tstate_head. Tim and Jonathan Giddy have run tests that make
it likely that this fixes the crashes -- although Tim hasn't heard
from the person who reported the original problem.
ExtensionClasses in isinstance() and issubclass().
- abstract instance and class protocols are used *only* in those
cases that would generate errors before the patch. That is, there's
no penalty for the normal case.
- instance protocol: an object smells like an instance if it
has a __class__ attribute that smells like a class.
- class protocol: an object smells like a class if it has a
__bases__ attribute that is a tuple with elements that
smell like classes (although not all elements may actually get
sniffed ;).
man pages suggest that the proper thing to do is to add THR_NEW_LWP to
the flags on thr_create(), and that there really isn't a downside, so
I'll do that.
"""
Spec says that on success pthread_create returns 0. It does not say
that an error code will be < 0. Linux glibc2 pthread_create() returns
ENOMEM (12) when one exceed process limits. (It looks like it should
return EAGAIN, but that's another story.)
For reference, see:
http://www.opengroup.org/onlinepubs/7908799/xsh/pthread_create.html
"""
[I have a feeling that similar bugs were fixed before; perhaps someone
could check that all error checks no check for != 0?]
xrange(), especially for platforms where int and long are different
sizes (so sys.maxint isn't actually the theoretical limit for the
length of a list, but the largest C int is -- sys.maxint is the
largest Python int, which is actually a C long).
test for classes with a __complex__() method. The attribute is pulled
out of the instance with PyObject_GetAttr() but this transfers
ownership and the function object was never DECREF'd.
v temporary variable was never decref'd. Test this by starting up the
interpreter, hitting C-c, then immediately exiting.
Same potential leak can occur if error is E_NOMEM, since the return is
done in the case block. Added Py_XDECREF(v); to both blocks, just
before the return.
think we have our own DOS box (i.e. we're not started from a command
line shell), we print a message and wait for the user to hit a key
before the DOS box is closed.
The hacky heuristic for determining whether we have our *own* DOS box
(due to Mark Hammond) is to test whether we're on line zero...
The following patches (relative to 1.5.2b1) enable Python dynamic
loading to work on NetBSD platforms that use ELF (presnetly mips and
alpha systems). They automaticly determine wether the system is ELF or
a.out rather than using astatic list of platforms so that when other
NetBSD platforms move to ELF, python will continue to work without
change.
In other words, hex(sys.hexversion) == 0x010502b2 for Python 1.5.2b2.
This is derived from the new variable PY_VERSION_HEX defined in patchlevel.h.
(Cute, eh?)
Also (non-BSDI specific):
- Change the CHECK_STATUS() macro so it tests for nonzero error codes
instead of negative error codes only (this was needed for BSDI, but
appears to be correct according to the PTHREADS spec).
- use memset() to zero out the allocated lock structure. Again, this
was needed for BSDI, but can't hurt elsewhere either.
initialization of class exceptions. Specifically:
init_class_exc(): This function now returns an integer status of the
class exception initialization. No fatal errors in this method now.
Also, use PySys_WriteStderr() when writing error messages. When an
error occurs in this function, 0 is returned, but the partial creation
of the exception classes is not undone (this happens elsewhere).
Things that could trigger the fallback:
- exceptions.py fails to be imported (due to syntax error, etc.)
- one of the exception classes is missing (e.g. due to library
version mismatch)
- exception class can't be inserted into __builtin__'s dictionary
- MemoryError instance can't be pre-allocated
- some other PyErr_Occurred
newstdexception(): Changed the error message. This is still a fatal
error because if the string based exceptions can't be created, we
really can't continue.
initerrors(): Be sure to xdecref the .exc field, which might be
non-NULL if class exceptions init was aborted.
_PyBuiltin_Init_2(): If class exception init fails, print a warning
message and reinstate the string based exceptions.
that file in fact did not exist or at least was not used. Change this
so that __file__ is *only* set to the .pyc/.pyo file when it actually
read the code object from it; otherwise __file__ is set to the .py
file.
happen when you use a non-keyword argument after a keyword argument,
and in this case you also get a syntax error. I fully suspect that
the underflow is caused by the code that stops generating code when it
detects the syntax error, but I can't find the culprit right now. I
know, I know.)
The MS compiler doesn't call it 'long long', it uses __int64,
so a new #define, LONG_LONG, has been added and all occurrences
of 'long long' are replaced with it.
This is a patch that Bill Bummgarner did for 1.4 that hasn't made its
way into the distribution yet. This is important if you want to use
the ObjC module.
frozen packages. (I *think* this means that we can now have a
built-in module bar that's a submodule of a frozen package foo, by
registering the built-in module with a name "foo.bar" in the table of
builtin modules.)
an exception from errno, with a supplied filename (primarily used by
IOError and OSError). If class exceptions are used then the exception
is instantiated with a 3-tuple: (errno, strerror, filename). For
backwards compatibility reasons, if string exceptions are used,
filename is ignored.
PyErr_SetFromErrno(): Implement in terms of
PyErr_SetFromErrnoWithFilename().
OSError. The EnvironmentError serves primarily as the (common
implementation) base class for IOError and OSError. OSError is used
by posixmodule.c
Also added tuple definition of EnvironmentError when using string
based exceptions.
(1) If a sequence S is shorter than len(S) indicated, don't fail --
just use the shorter size. (I.e, len(S) is just a hint.)
(2) Implement the special case map(None, S) as list(S) -- it's faster.
must be enabled here, otherwise the errno we set on overflows is not
the errno that's being read by compile.c. Wonder how many other files
that do their own "#include config.h" need this too :-(
(Because of the structure of autoconf, it's not so simple to get this
into config.h...)
the filename contains at least a rudimentary pathname.
(The bad part is that we need to call getcwd() because only a prefix
of ".\\" is not enough -- we prefix the drive letter.)
and lists; if the size is negative, raise an exception. Also raise an
exception when an undefined type is found -- all this to increase the
chance that garbage input causes an exception instead of a core dump.
swapped arguments].
Also make sure that no use of a function pointer gotten from a
tp_as_sequence or tp_as_mapping structure is made without checking it
for NULL first.
the code here becomes much simpler. In particular: abs(), divmod(),
pow(), int(), long(), float(), len(), tuple(), list().
Also make sure that no use of a function pointer gotten from a
tp_as_sequence or tp_as_mapping structure is made without checking it
for NULL first.
A few other cosmetic things, such as properly reindenting slice().
old value in a temporary and XDECREF it only after then new value has
been set. This prevents the (unlikely) case where the destructor of
the member uses the containing object -- it would find it in an
undefined state.
because the path through the code would notice that sys.__path__ did
not exist and it would fall back to the default path (builtins +
sys.path) instead of failing). No longer.
Date: Thu, 14 Sep 1995 12:18:20 -0400
From: Alan Morse <alan@dvcorp.com>
To: python-list@cwi.nl
Subject: getargs bug in 1.2 and 1.3 BETA
We have found a bug in the part of the getargs code that we added
and submitted, and which was incorporated into 1.1.
The parsing of "O?" format specifiers is not handled correctly;
there is no "else" for the "if" and therefore it can never fail.
What's worse, the advancing of the varargs pointer is not
handled properly, so from then on it is out of sync, wreaking
all sorts of havoc. (If it had failed properly, then the out-of-sync
varargs would not have been an issue.)
Below is the context diff for the change.
Note that I have made a few stylistic changes beyond adding the
else case, namely:
1) Making the "O" case follow the convention established by the other
format specifiers of getting all their vararg arguments before
performing the test, rather than getting some before and some after
the test passes.
2) Making the logic of the tests parallel, so the "if" part indicates
that the format is accepted and the "else" part indicates that the
format has failed. They were inconsistent with each other and with the
the other format specifiers.
-Alan Morse (amorse@dvcorp.com)
to the table of built-in modules. This should normally be called
*before* Py_Initialize(). When the malloc() or realloc() call fails,
-1 is returned and the existing table is unchanged.
After a similar function by Just van Rossum.
int PyImport_ExtendInittab(struct _inittab *newtab);
int PyImport_AppendInittab(char *name, void (*initfunc)());
Adapted from code submitted by Just van Rossum.
PySys_WriteStdout(format, ...)
PySys_WriteStderr(format, ...)
The first function writes to sys.stdout; the second to sys.stderr. When
there is a problem, they write to the real (C level) stdout or stderr;
no exceptions are raised (but a pending exception may be cleared when a
new exception is caught).
Both take a printf-style format string as their first argument followed
by a variable length argument list determined by the format string.
*** WARNING ***
The format should limit the total size of the formatted output string to
1000 bytes. In particular, this means that no unrestricted "%s" formats
should occur; these should be limited using "%.<N>s where <N> is a
decimal number calculated so that <N> plus the maximum size of other
formatted text does not exceed 1000 bytes. Also watch out for "%f",
which can print hundreds of digits for very large numbers.
PyThreadState_GetDict() returns a dictionary that can be used to hold such
state; the caller should pick a unique key and store its state there. If
PyThreadState_GetDict() returns NULL, an exception has been raised (most
likely MemoryError) and the caller should pass on the exception. */
PyObject *
PyThreadState_GetDict()
Frozen packages are indicated by a negative size (the code string
is the __import__.py file). A frozen package module has its __path__
set to a string, the package name.
time can be in PyImport_ImportModuleEx(). Recursive calls from the
same thread are okay.
Potential problems:
- The lock should really be part of the interpreter state rather than
global, but that would require modifying more files, and I first want
to figure out whether this works at all.
- One could argue that the lock should be per module -- however that
would be complicated to implement. We would have to have a linked
list of locks per module name, *or* invent a new object type to
represent a lock, so we can store the locks in the module or in a
separate dictionary. Both seem unwarranted. The one situation where
this can cause problems is when loading a module takes a long time,
e.g. when the module's initialization code interacts with the user --
during that time, no other threads can run. I say, "too bad."
(modified) and use that.
Some differences in the cleanup algorithm:
- Clear __main__ before the other modules.
- Delete more sys variables: including ps1, ps2, exitfunc, argv, and
even path -- this will prevent new imports!
- Restore stdin, stdout, stderr from __stdin__, __stdout__,
__stderr__, effectively deleting hooks that the user might have
installed -- so their (the hooks') destructors will run.
This is an option for OS-es with case-insensitive but case-preserving
filesystems. It is currently supported for Win32 and MacOS. To
enable it, #define CHECK_IMPORT_CASE in your platform specific
config.h. It is enabled by default on those systems where it is
supported. On Win32, it can be disabled at runtime by setting the
environment variable PYTHONCASEOK (to any value).
When enabled, the feature checks that the case of the requested module
name matches that of the filename found in the filesystem, and raises
a NameError exception when they don't match.
pass it the true file. This is used to set __file__ properly, instead
of believing what the code object carries with it. (If the pointer
is NULL, the code object's co_filename is still used.)
- Add Py_FrozenFlag, intended to suppress error messages fron
getpath.c in frozen binaries.
- Add Py_GetPythonHome() and Py_SetPythonHome(), intended to allow
embedders to force a different PYTHONHOME.
- Add new interface PyErr_PrintEx(flag); same as PyErr_Print() but
flag determines whether sys.last_* are set or not. PyErr_Print()
now simply calls PyErr_PrintEx(1).
(1) Explicitly clear __builtin__._ and sys.{last,exc}_* before
clearing anything else. These are common places where user values
hide and people complain when their destructors fail. Since the
modules containing them are deleted *last* of all, they would come too
late in the normal destruction order. Sigh.
(2) Add some debugging aid to cleanup (after a suggestion by Marc
Lemburg) -- print the names of the modules being cleaned, and (when
-vv is used) print the names of the variables being cleared.
now implement the following finalization strategy.
1. Whenever this code deletes a module, its directory is cleared
carefully, as follows:
- set all names to None that begin with exactly one underscore
- set all names to None that don't begin with two underscores
- clear the directory
2. Modules are deleted in the following order:
- modules with a reference count of 1, except __builtin__ or __sys__
- repeat until no more are found with a reference count of 1
- __main__ if it's still there
- all remaining modules except __builtin__ or sys
- sys
_ __builtin__
This is a bit of a hack: when the shared library is loaded, the module
name is "package.module", but the module calls Py_InitModule*() with just
"module" for the name. The shared library loader squirrels away the true
name of the module in _Py_PackageContext, and Py_InitModule*() will
substitute this (if the name actually matches).
1) The __builtins__ variable in the __main__ module is set to the
__builtin__ module instead of its __dict__.
2) Get rid of the SIGHUP and SIGTERM handlers. They can't be made to
work reliably when threads may be in use, they are Unix specific, and
Python programmers can now program this functionality is a safer way
using the signal module.
Jeremy Hylton
Fred Drake
Paul Prescod
Barry Warsaw
Thomas Wouters
Tim Peters
Guido van Rossum
Fredrik Lundh
Marc-André Lemburg
Trent Mick
Skip Montanaro
Vladimir Marangozov
Mark Hammond
Moshe Zadka
Jack Jansen
Peter Schneider-Kamp
Andrew M. Kuchling