If OpenSSL was built without PSK support, the python TLS-PSK
methods will raise "NotImplementedError" if called.
Add a constant "ssl.HAS_PSK" to check if TLS-PSK is supported
Add support for TLS-PSK (pre-shared key) to the ssl module.
---------
Co-authored-by: Oleg Iarygin <oleg@arhadthedev.net>
Co-authored-by: Gregory P. Smith <greg@krypto.org>
* In preauth tests of test_ssl, explicitly break reference cycles
invoving SingleConnectionTestServerThread to make sure that the
thread is deleted. Otherwise, the test marks the environment as
altered because the threading module sees a "dangling thread"
(SingleConnectionTestServerThread). This test leak was introduced
by the test added for the fix of issue gh-108310.
* Use support.SHORT_TIMEOUT instead of hardcoded 1.0 or 2.0 seconds
timeout.
* SingleConnectionTestServerThread.run() catchs TimeoutError
* Fix a race condition (missing synchronization) in
test_preauth_data_to_tls_client(): the server now waits until the
client connect() completed in call_after_accept().
* test_https_client_non_tls_response_ignored() calls server.join()
explicitly.
* Replace "localhost" with server.listener.getsockname()[0].
Instances of `ssl.SSLSocket` were vulnerable to a bypass of the TLS handshake
and included protections (like certificate verification) and treating sent
unencrypted data as if it were post-handshake TLS encrypted data.
The vulnerability is caused when a socket is connected, data is sent by the
malicious peer and stored in a buffer, and then the malicious peer closes the
socket within a small timing window before the other peers’ TLS handshake can
begin. After this sequence of events the closed socket will not immediately
attempt a TLS handshake due to not being connected but will also allow the
buffered data to be read as if a successful TLS handshake had occurred.
Co-authored-by: Gregory P. Smith [Google LLC] <greg@krypto.org>
In PEM, we need to parse until error and then suppress `PEM_R_NO_START_LINE`, because PEM allows arbitrary leading and trailing data. DER, however, does not. Parsing until error and suppressing `ASN1_R_HEADER_TOO_LONG` doesn't quite work because that error also covers some cases that should be rejected.
Instead, check `BIO_eof` early and stop the loop that way.
Automerge-Triggered-By: GH:Yhg1s
GH-25309 enabled SSL_OP_IGNORE_UNEXPECTED_EOF by default, with a comment
that it restores OpenSSL 1.1.1 behavior, but this wasn't quite right.
That option causes OpenSSL to treat transport EOF as the same as
close_notify (i.e. SSL_ERROR_ZERO_RETURN), whereas Python actually has
distinct SSLEOFError and SSLZeroReturnError exceptions. (The latter is
usually mapped to a zero return from read.) In OpenSSL 1.1.1, the ssl
module would raise them for transport EOF and close_notify,
respectively. In OpenSSL 3.0, both act like close_notify.
Fix this by, instead, just detecting SSL_R_UNEXPECTED_EOF_WHILE_READING
and mapping that to the other exception type.
There doesn't seem to have been any unit test of this error, so fill in
the missing one. This had to be done with the BIO path because it's
actually slightly tricky to simulate a transport EOF with Python's fd
based APIs. (If you instruct the server to close the socket, it gets
confused, probably because the server's SSL object is still referencing
the now dead fd?)
Co-authored-by: blurb-it[bot] <43283697+blurb-it[bot]@users.noreply.github.com>
Co-authored-by: Christian Heimes <christian@python.org>
Co-authored-by: Hugo van Kemenade <hugovk@users.noreply.github.com>
Fixes https://github.com/python/cpython/issues/89051
This appears to be a typo. It causes try_protocol_combo to try to turn
on SSL 3.0 when testing PROTOCOL_SSLv23 (aka PROTOCOL_TLS), which
doesn't make any sense. Fix it to be PROTOCOL_SSLv3.
Without this, try_protocol_combo is actually setting
context.minimum_version to SSLv3 when called as
try_protocol_combo(ssl.PROTOCOL_TLS, ssl.PROTOCOL_TLS, True)
One would think this causes a no-ssl3 OpenSSL build to fail, but OpenSSL
forgot to make SSL_CTX_set_min_proto_version(SSL3_VERSION) does not
notice no-ssl3, so this typo has gone undetected. But we should still
fix the typo because, presumably, a future version of OpenSSL will
remove SSL 3.0 and do so more thoroughly, at which point this will
break.
Remove the ssl.wrap_socket() function, deprecated in Python 3.7:
instead, create a ssl.SSLContext object and call its
sl.SSLContext.wrap_socket() method. Any package that still uses
ssl.wrap_socket() is broken and insecure. The function neither sends
a SNI TLS extension nor validates server hostname. Code is subject to
CWE-295 : Improper Certificate Validation.
Remove dead code related to ssl.PROTOCOL_SSLv2. ssl.PROTOCOL_SSLv2
was already removed in Python 3.10.
In test_ssl, @requires_tls_version('SSLv2') always returned False.
Extract of the removed code: "OpenSSL has removed support for SSLv2".
Add methods enterContext() and enterClassContext() in TestCase.
Add method enterAsyncContext() in IsolatedAsyncioTestCase.
Add function enterModuleContext().
- skip doctest that changes depending on target system
- skip doctest that only fails on CI
- substitute in values that change depending on target system
Undo rejected PEP-663 changes:
- restore `repr()` to its 3.10 status
- restore `str()` to its 3.10 status
New changes:
- `IntEnum` and `IntFlag` now leave `__str__` as the original `int.__str__` so that str() and format() return the same result
- zero-valued flags without a name have a slightly changed repr(), e.g. `repr(Color(0)) == '<Color: 0>'`
- update `dir()` for mixed-in types to return all the methods and attributes of the mixed-in type
- added `_numeric_repr_` to `Flag` to control display of unnamed values
- enums without doc strings have a more comprehensive doc string added
- `ReprEnum` added -- inheriting from this makes it so only `__repr__` is replaced, not `__str__` nor `__format__`; `IntEnum`, `IntFlag`, and `StrEnum` all inherit from `ReprEnum`
Remove the asyncore and asynchat modules, deprecated in Python
3.6: use the asyncio module instead.
Remove the smtpd module, deprecated in Python 3.6: the aiosmtpd
module can be used instead, it is based on asyncio.
* Remove asyncore, asynchat and smtpd documentation
* Remove test_asyncore, test_asynchat and test_smtpd
* Rename Lib/asynchat.py to Lib/test/support/_asynchat.py
* Rename Lib/asyncore.py to Lib/test/support/_asyncore.py
* Rename Lib/smtpd.py to Lib/test/support/_smtpd.py
* Remove DeprecationWarning from private _asyncore, _asynchat and
_smtpd modules
* _smtpd: remove deprecated properties
Instead of explicitly enumerate test classes for run_unittest()
use the unittest ability to discover tests. This also makes these
tests discoverable and runnable with unittest.
load_tests() can be used for dynamic generating tests and adding
doctests. setUpModule(), tearDownModule() and addModuleCleanup()
can be used for running code before and after all module tests.
The internal `_ssl._SSLSocket` object now provides methods to retrieve
the peer cert chain and verified cert chain as a list of Certificate
objects. Certificate objects have methods to convert the cert to a dict,
PEM, or DER (ASN.1).
These are private APIs for now. There is a slim chance to stabilize the
approach and provide a public API for 3.10. Otherwise I'll provide a
stable API in 3.11.
Signed-off-by: Christian Heimes <christian@python.org>
Grant Ramsay
Zackery Spytz
Furkan Onder
Nikita Sobolev
Serhiy Storchaka
Victor Stinner
Łukasz Langa
Irit Katriel
David Benjamin
Benjamin Fogle
Thomas Grainger
Christian Heimes
Hugo van Kemenade
Ethan Furman
Kumar Aditya
Mariusz Felisiak
Erlend Egeberg Aasland
Joe