adds the 'install_data' and 'install_scripts' commands; these two
are trivial thanks to the 'install_misc' base class in cmd.py.
(Minor tweaks and commentary by me; the code is untested so far.)
Also added creation of 'implib_dir', a temporary directory specific to
MSVC++ -- but I checked in two ways of fixing it (Lyle's and mine),
because I'm not sure which is right.
in command-line options, and in two phases at that: first, we expand
'install_base' and 'install_platbase', and then the other 'install_*'
options. This lets us do tricky stuff like
install --prefix='/tmp$sys_prefix'
...oooh, neat.
Simplified 'select_scheme()' -- it's no longer responsible for expanding
config vars, tildes, etc.
Define installation-specific config vars in 'self.config_vars', rather than
in a local dictionary of one method. Also factored '_expand_attrs()' out
of 'expand_dirs()' and added 'expand_basedirs()'.
Added a bunch of debugging output so I (and others) can judge the
success of this crazy scheme through direct feedback.
Adds bztar format to generate .tar.bz2 tarballs
Uses the -f argument to overright old tarballs automatically, I am
assuming that if the old tarball was wanted it would have been moved or
else the version number would have been changed.
Uses the -9 argument to bzip2 and gzip to use maximum
compression. Compress uses the maximum compression by default.
Tests for correct value for the 'compress' argument of make_tarball. This
is one less place for someone adding new compression programs to forget to
change.
- DistutilsOptionError is now documented as it's actually used, ie.
to indicate bogus option values (usually user options, eg. from
the command-line)
- added DistutilsSetupError to indicate errors that definitely arise
in the setup script
- got rid of DistutilsValueError, and changed all usage of it to
either DistutilsSetupError or ValueError as appropriate
- simplified a bunch of option get/set methods in Command and
Distribution classes -- just pass on AttributeError most of
the time, rather than turning it into something else
Added code to include source files from 'build_clib' command to default file
list -- currently this won't work, since 'build_clib' doesn't have a
'get_source_files()' method!
* build to "Debug" or "Release" temp directory
* put linker turds (.lib and .exp files) in the build temp directory
* tack on "_d" to extensions built with debugging
* added 'get_ext_libname()' help in putting linker turds to temp dir
Also, moved the code that simplifies None to empty list for a bunch
of options to 'finalize_options()' instead of 'run()'.
the command that actually creates "dumb" binary distributions, ie.
tarballs and zip files that you just unpack under <prefix> or <exec-prefix>.
Very limited, but it's a start.
Initial revision is pretty limited; it only knows how to generate "dumb"
binary distributions, i.e. a tarball on Unix and a zip file on Windows.
Also, due to limitations in the installation code, it only knows how to
distribute Python library code. But hey, it's a start.
provided by Distribution.
Cosmetic and error message tweaks.
Simplified 'make_release_tree()':
* extracted 'distutils.util.create_tree()'
* don't have to do hard-linking ourselves -- it's now handled by
'distutils.util.copy_file()' (although the detection of
whether hard linking is available still needs to be factored out)
Removed 'make_tarball()' and 'make_zipfile()' entirely -- their role
is now amply filled by 'distutils.util.make_archive()'.
Simplified 'make_distribution()':
* use Distribution's new 'get_full_name()' method
* use 'make_archive()' instead of if/elif/.../else on the archive format
is responsible for installing all Python modules (pure and extensions).
Added 'get_outputs()' in preparation for the 'bdist' command, and
'_mutate_outputs()' to support 'get_outputs()'.
in a class attribute 'sub_commands', rather than hard-coded in 'run()'.
This should make it easier to subclass 'install', and also makes it
easier to keep 'run()' and the new 'get_outputs()' consistent.
Added 'get_outputs()' in preparation for the 'bdist' command.
Changed signature of 'build_extensions()': no longer takes the extension
list, but uses 'self.extensions' (just like 'get_outputs()' has to)
Moved call to 'check_extensions_list()' from 'run()' to 'build_extensions()',
again for consistency with 'get_outputs()'.
A host of improvements in preparation for the 'bdist' command:
- added 'get_outputs()' method (all the other improvements were to support
this addition)
- made 'find_package_modules()' and 'find_modules()' return similar
values (list of (package, module, module_filename) tuples)
- factored 'find_all_modules()' out of 'get_source_files()' (needed
by 'get_outputs()')
- factored 'get_module_outfile()' out of 'build_module()' (also needed
by 'get_outputs()')
- various little tweaks, improvements, comment/doc updates
these must come from the 'build' command. This means we no longer need
the misconceived 'set_peer_option()' method in Command and, more importantly,
sweeps away a bunch of potential future complexity to handle this tricky
case.
this command for a while; this implements roughly the plan cooked up by
Guido, Fred, and me. Seems to strike a nice balance between usability in
the common cases (just set one option), expandability for more types of
files to install in future, and customizability of installation
directories.
This revision isn't completely working: standard and alternate
installations work fine, but there are still some kinks to work out of
customized installations.
* improve help strings
* warn if user supplies non-existing directories
* don't try to 'remove_tree()' non-existing directories
* try to remove the build_base after cleanup (but don't do or say
anything if it fails -- this is just in case we made it empty)
* replaced build_lib.py with build_clib.py
* renamed the class in build_clib.py
* changed all references to 'build_lib' command in other command classes
when building extensions (uses build_lib's 'get_library_names()' method).
Ensure that the relative structure of source filenames is preserved in
the temporary build tree, eg. foo/bar.c compiles to
build/temp.<plat>/foo/bar.o.
Added 'build_clib' and 'build_temp' options (where to put C libraries
and where to put temporary compiler by-products, ie. object files).
Moved the call to 'check_library_list()' from 'run()' to 'finalize_options()'
-- that way, if we're going to crash we do so earlier, and we guarantee
that the library list is valid before we do anything (not just run).
Disallow directory separators in library names -- the compiled library
always goes right in 'build_clib'.
Added 'get_library_names()', so the "build_ext" command knows what
libraries to link every extension with.
* 'build_dir' -> 'build_lib', which by default takes its value
straight from 'build_lib' in the 'build' command
* added 'build_temp' and 'inplace' options
* change 'build_extensions()' to put object files (compiler turds) in
'build_temp' dir
* complicated the name-of-extension-file shenanigans in
'build_extensions()' to support "in-place" extension building, i.e.
put the extension right into the source tree (handy for developers)
* added 'get_ext_fullname()', renamed 'extension_filename()' to
'get_ext_filename()', and tweaked the latter a bit -- all to support
the new filename shenanigans
old 'dist' command, but the code for dealing with manifests is completely
redone -- and renaming the command to 'sdist' is more symmetric with the
soon-to-exist 'bdist' command.
'--help-commands' option).
Shuffled imports around in a few command modules to avoid expensive
up-front import of sysconfig (and resulting delays in generating list
of all commands).
Gregory P. Smith
Greg Ward