Add an entry for the ``--enable-experimental-jit`` option in ``Doc/using/configure.rst``.
This was added as an experimental option in CPython 3.13.
Possible values for it:
* `no` - don't build the JIT.
* `yes` - build the JIT.
* `yes-off` - build the JIT but disable it by default.
* `interpreter` - don't build the JIT but enable tier 2 interpreter instead.
Co-authored-by: Bénédikt Tran <10796600+picnixz@users.noreply.github.com>
The first version had it running two forkserver and one spawn tests underneath each of the _fork, _forkserver, and _spawn test suites that build off the generic one.
This adds to the existing complexity of the multiprocessing test suite by offering BaseTestCase classes another attribute to control which suites they are invoked under. Practicality vs purity here. :/
Net result: we don't over-run the new test and their internal logic is simplified.
Skip `testMakefileCloseSocketDestroy` test if `sys.getrefcount` isn't available. This is necessary for PyPy and other Python implementations that do not have `sys.getrefcount`.
When `zipfile.Path.open` is called, the implementation will check
whether the path already exists in the ZIP file. However, this check is
only required when the ZIP file is in read mode. By swapping arguments
of the `and` operator, the short-circuiting will prevent the check from
being run in write mode.
This change will improve the performance of `open()`, because checking
whether a file exists is slow in write mode, especially when the archive
has many members.
gh-117378: Fix multiprocessing forkserver preload sys.path inheritance.
`sys.path` was not properly being sent from the parent process when launching
the multiprocessing forkserver process to preload imports. This bug has been
there since the forkserver start method was introduced in Python 3.4. It was
always _supposed_ to inherit `sys.path` the same way the spawn method does.
Observable behavior change: A `''` value in `sys.path` will now be replaced in
the forkserver's `sys.path` with an absolute pathname
`os.path.abspath(os.getcwd())` saved at the time that `multiprocessing` was
imported in the parent process as it already was when using the spawn start
method. **This will only be observable during forkserver preload imports**.
The code invoked before calling things in another process already correctly sets `sys.path`.
Which is likely why this went unnoticed for so long as a mere performance issue in
some configurations.
A workaround for the bug on impacted Pythons is to set PYTHONPATH in the
environment before multiprocessing's forkserver process was started. Not perfect
as that is then inherited by other children, etc, but likely good enough for many
people's purposes.
Co-authored-by: Serhiy Storchaka <storchaka@gmail.com>
In `PathBase.resolve()`, raise `UnsupportedOperation` if a non-POSIX path
parser is used (our implementation uses `posixpath._realpath()`, which
produces incorrect results for non-POSIX path flavours.) Also tweak code to
call `self.absolute()` upfront rather than supplying an emulated `getcwd()`
function.
Adjust `PathBase.absolute()` to work somewhat like `resolve()`. If a POSIX
path parser is used, we treat the root directory as the current directory.
This is the simplest useful behaviour for concrete path types without a
current directory cursor.
In the past I've equivocated about whether to require at least one argument
in the `PurePathBase` (and `PathBase`) initializer, and what the default
should be if we make it optional. I now have a local use case that has
persuaded me to make it optional and default to the empty string (a
`zipp.Path`-like class that treats relative and absolute paths similarly.)
Happily this brings the base class more in line with `PurePath` and `Path`.
Add emscripten.py script to automate emscripten build.
This is modeled heavily on `Tools/wasm/wasi.py`. This will form the basis of an Emscripten build bot.
Adjust `urllib.request.pathname2url()` and `url2pathname()` so that they
don't remove slashes from Windows DOS drive paths and URLs. There was no
basis for this behaviour, and it conflicts with how UNC and POSIX paths are
handled.
Before #126387, if we didn't detect float word order we'd raise the following
configure error:
Unknown float word ordering. You need to manually preset
ax_cv_c_float_words_bigendian=no (or yes) according to your system.
This puts it back (except for ARM or WASM, which as hardcoded).
Eventually wasm32-wasi will represent WASI 1.0, and so it's currently deprecated so it can be used for that eventual purpose. wasm32-wasip1 is also more specific to what version of WASI is currently supported.
---------
Co-authored-by: Erlend E. Aasland <erlend.aasland@protonmail.com>
Move creation of a tuple for var-positional parameter out of
_PyArg_UnpackKeywordsWithVararg().
Merge _PyArg_UnpackKeywordsWithVararg() with _PyArg_UnpackKeywords().
Add a new parameter in _PyArg_UnpackKeywords().
The "parameters" and "converters" attributes of ParseArgsCodeGen no
longer contain the var-positional parameter. It is now available as the
"varpos" attribute. Optimize code generation for var-positional
parameter and reuse the same generating code for functions with and without
keyword parameters.
Add special converters for var-positional parameter. "tuple" represents it as
a Python tuple and "array" represents it as a continuous array of PyObject*.
"object" is a temporary alias of "tuple".
* gh-126298: Don't deduplicated slice constants based on equality
* NULL check for PySlice_New
* Fix refcounting
* Fix refcounting some more
* Fix refcounting
* Make tests more complete
* Fix tests
The primary objective here is to allow some later changes to be cleaner. Mostly this involves renaming things and moving a few things around.
* CrossInterpreterData -> XIData
* crossinterpdatafunc -> xidatafunc
* split out pycore_crossinterp_data_registry.h
* add _PyXIData_lookup_t
If `read()` in the ConnectionHandler thread raises `OSError` (except `ConnectionError`),
the ConnectionHandler shuts down the entire ThreadedEchoServer,
preventing further connections.
It also does that for `EPROTOTYPE` in `wrap_conn`.
As far as I can see, this is done to avoid the server thread getting stuck,
forgotten, in its accept loop. However, since 2011 (5b95eb90a7)
the server is used as a context manager, and its `__exit__` does `stop()` and `join()`.
(I'm not sure if we *always* used `with` since that commit, but currently we do.)
Make sure that the context manager *is* used, and remove the `server.stop()`
calls from ConnectionHandler.
The skipping machinery called `getattr(err, "reason", "")` on an arbitrary
exception. As intermittent Buildbot failures show, sometimes it's set
to None.
Convert it to string for this specific check.
Docs: Remove the logging howto potential promise of multiprocessing support in the future.
Stick to the facts and suggestions, don't provide hope where we're not going to
implement complexity that we'd rather the user implement themselves when
needed.
The following variables are now used in compiler checks:
- $ac_cv_gcc_compat is set to 'yes' for GCC compatible compilers
(the C preprocessor defines the __GNUC__ macro)
- for compiler basename checks, use $CC_BASENAME
(may contain platform triplets)
- for the rest, use $ac_cv_cc_name
(does not contain platform triplets)
Introduce helpers for (un)specializing instructions
Consolidate the code to specialize/unspecialize instructions into
two helper functions and use them in `_Py_Specialize_BinaryOp`.
The resulting code is more concise and keeps all of the logic at
the point where we decide to specialize/unspecialize an instruction.
Gregory P. Smith
Pedro Fonini
Kirill Podoprigora
CF Bolz-Tereick
Jan Hicken
Hugo van Kemenade
Barney Gale
Ken Jin
Hood Chatham
Mark Shannon
Steve Dower
RUANG (James Roy)
Xuanteng Huang
Kumar Aditya
Serhiy Storchaka
Valery Fedorenko
Bénédikt Tran
Brett Cannon
alm
Michael Droettboom
Eric Snow
Aditya Borikar
Valerii
Richard Hansen
Petr Viktorin
Erlend E. Aasland
Duprat
Stephen Morton
Donghee Na
mpage