Remove broken code in visitDict(). I assume the code was trying to
add set lineno events for each line of a dict constructor, but I think
it was using the wrong object (node instead of k or v).
A variety of changes from Michael Hudson to get the compiler working
with 2.3. The primary change is the handling of SET_LINENO:
# The set_lineno() function and the explicit emit() calls for
# SET_LINENO below are only used to generate the line number table.
# As of Python 2.3, the interpreter does not have a SET_LINENO
# instruction. pyassem treats SET_LINENO opcodes as a special case.
A few other small changes:
- Remove unused code from pycodegen and pyassem.
- Fix error handling in parsermodule. When PyParser_SimplerParseString()
fails, it sets an exception with detailed info. The parsermodule
was clobbering that exception and replacing it was a generic
"could not parse string" exception. Keep the original exception.
[#448679] Left to right
* Python/compile.c
(com_dictmaker): Reordered evaluation of dictionaries to follow strict
LTR evaluation.
* Lib/compiler/pycodegen.py
(CodeGenerator.visitDict): Reordered evaluation of dictionaries to
follow strict LTR evaluation.
* Doc/ref/ref5.tex
Documented the general LTR evaluation order idea.
* Misc/NEWS
Documented change in evaluation order of dictionaries.
Fix by Neil Schemenauer. Visit the Subscript node when trying to find
the operation for a statement.
XXX Not sure if there are other nodes that should be visited.
compile() becomes replacement for builtin compile()
compileFile() generates a .pyc from a .py
both are exported in __init__
compiler.parse() gets optional second argument to specify compilation
mode, e.g. single, eval, exec
Add AbstractCompileMode as parent class and Module, Expression, and
Interactive as concrete subclasses. Each corresponds to a compilation
mode.
THe AbstractCompileMode instances in turn delegate to CodeGeneration
subclasses specialized for their particular functions --
ModuleCodeGenerator, ExpressionCodeGeneration,
InteractiveCodeGenerator.
Remove the only test in the syntax module. It ends up that the
transformer must handle this error case.
In the transformer, check for a list compression in com_assign_list()
by looking for a list_for node where a comma is expected.
In pycodegen.compile() re-raise the SyntaxError rather than catching
it and exiting
Invoke compiler.syntax.check() after building AST. If a SyntaxError
occurs, print the error and exit without generating a .pyc file.
Refactor code to use compiler.misc.set_filename() rather than passing
filename argument around to each CodeGenerator instance.
Remove the option to have nested scopes or old LGB scopes. This has a
large impact on the code base, by removing the need for two variants
of each CodeGenerator.
Add a get_module() method to CodeGenerator objects, used to get the
future features for the current module.
Set CO_GENERATOR, CO_GENERATOR_ALLOWED, and CO_FUTURE_DIVISION flags
as appropriate.
Attempt to fix the value of nlocals in newCodeObject(), assuming that
nlocals is 0 if CO_NEWLOCALS is not defined.
Fix list comp code generation -- emit GET_ITER instead of Const(0)
after the list.
Add CO_GENERATOR flag to generators.
Get CO_xxx flags from the new module
try/except or try/finally.
Previous versions had only track SETUP_LOOP blocks and ignored the
exception part. This meant that it allowed continue inside a
try/except but generated buggy code. Now it does the right thing.
(Hard to believe these were never handled before)
Add misc.mangle() that mangles based on the rules in compile.c.
XXX Need to test the corner cases
Update CodeGenerator with a class_name attribute bound to None. If a
particular instance is created within a class scope, the instance's
class_name is bound to that class's name.
Add mangle() method to CodeGenerator that mangles if the class_name
has a class_name in it.
Modify the FunctionCodeGenerator family to handle an extra argument--
the class_name.
Wrap all name ops and attrnames in calls to self.mangle()
Make nested scopes enabled by default
Add is_constant_false() helper so that compiled code and symbols are
consistent with builtin compiler's handling of "if 0:"
Fix doc string handling to be consistent with recent change that
eliminates the doc string from the Module's node attribute.
Add fix to print handling from Evan & Shane.
Track change to visitor api by making "verbose" explicit.
Comment out setting CO_NESTED flag (it's unnecessary in 2.2).
Always emit a SET_LINENO 0 at the beginning of the module. The
builtin compiler does this, and it's much easier to compare bytecode
generated by the two compilers if they both do.
Move the SET_LINENO inside the FOR_LOOP block for list
comprehensions. Also for compat. with builtin compiler.
Fix annoying bugs in flow graph layout code. In some cases the
implicit control transfers weren't honored. In other cases,
JUMP_FORWARD instructions jumped backwards.
Remove unused arg from nextBlock().
pycodegen.py
Add optional force kwarg to set_lineno() that will emit a
SET_LINENO even if it is the same as the previous lineno.
Use explicit LOAD_FAST and STORE_FAST to access list comp implicit
variables. (The symbol table doesn't know about them.)
embedded code objects (e.g. functions) rather than the generated code
object. This change means that the compiler generates code for
everything at the end, rather then generating code for each function
as it finds it. Implementation note: _convert_LOAD_CONST in
pyassem.py must be change to call getCode().
Other changes follow. Several changes creates extra edges between
basic blocks to reflect control flow for loops and exceptions. These
missing edges had gone unnoticed because they do not affect the
current compilation process.
pyassem.py:
Add _enable_debug() and _disable_debug() methods that print
instructions and blocks to stdout as they are generated.
Add edges between blocks for instructions like SETUP_LOOP,
FOR_LOOP, etc.
Add pruneNext to get rid of bogus edges remaining after
unconditional transfer ops (e.g. JUMP_FORWARD)
Change repr of Block to omit block length.
pycodegen.py:
Make sure a new block is started after FOR_LOOP, etc.
Change assert implementation to use RAISE_VARARGS 1 when there is
no user-specified failure output.
misc.py:
Implement __contains__ and copy for Set.
1.5.2. The compiler generates code for the version of the interpreter
it is run under.
ast.py:
Print and Printnl add dest attr for extended print
new node AugAssign for augmented assignments
new nodes ListComp, ListCompFor, and ListCompIf for list
comprehensions
pyassem.py:
add work around for string-Unicode comparison raising UnicodeError
on comparison of two objects in code object's const table
pycodegen.py:
define VERSION, the Python major version number
get magic number using imp.get_magic() instead of hard coding
implement list comprehensions, extended print, and augmented
assignment; augmented assignment uses Delegator classes (see
doc string)
fix import and tuple unpacking for 1.5.2
transformer.py:
various changes to support new 2.0 grammar and old 1.5 grammar
add debug_tree helper than converts and symbol and token numbers
to their names
Fix import support to work with import as variant of Python 2.0. The
grammar for import changed, requiring changes in transformer and code
generator, even to handle compilation of imports with as.
- fix tab space issues (SF patch #101167 by Neil Schemenauer)
- fix co_flags for classes to include CO_NEWLOCALS (SF patch #101145 by Neil)
- fix for merger of UNPACK_LIST and UNPACK_TUPLE into UNPACK_SEQUENCE,
(SF patch #101168 by, well, Neil :)
- Adjust bytecode MAGIC to current bytecode.
TODO: teach compile.py about list comprehensions.
Attached is a set of diffs for the .py compiler that adds support
for the new extended call syntax.
compiler/ast.py:
CallFunc node gets 2 new children to support extended call syntax -
"star_args" (for "*args") and "dstar_args" (for "**args")
compiler/pyassem.py
It appear that self.lnotab is supposed to be responsible for
tracking line numbers, but self.firstlineno was still hanging
around. Removed self.firstlineno completely. NOTE - I didnt
actually test that the generated code has the correct line numbers!!
Stack depth tracking appeared a little broken - the checks never
made it beyond the "self.patterns" check - thus, the custom methods
were never called! Fixed this.
(XXX Jeremy notes: I think this code is still broken because it
doesn't track stack effects across block bounaries.)
Added support for the new extended call syntax opcodes for depth
calculations.
compiler/pycodegen.py
Added support for the new extended call syntax opcodes.
compiler/transformer.py
Added support for the new extended call syntax.
code generator uses flowgraph as intermediate representation. the old
rep uses a list with explicit "StackRefs" to indicate the target
of jumps.
pyassem converts flowgraph to bytecode, breaks up individual steps of
generating bytecode
fix imports
remove parse functions and visitor code
track name change: Classdef to Class
add some comments and tweak order of visitXXX methods
get rid of if __name__ == "__main__ section
(big surprise). new solution is a little less hackish.
Code gen adds a TupleArg instance in the argument slot. The tuple arg
includes a copy of the names that it is responsble for binding. The
PyAssembler uses this information to calculate the correct argcount.
all fix this wacky case: del (a, ((b,), c)), d
which is the same as: del a, b, c, d
(Can't wait for Guido to tell me why.)
solution uses findOp which walks a tree to find out whether it
contains OP_ASSIGN or OP_DELETE or ...
Michael W. Hudson
Jeremy Hylton
Gustavo Niemeyer
Neal Norwitz
Tim Peters
Barry Warsaw
Thomas Wouters