Co-authored-by: Lawrence D’Anna <lawrence_danna@apple.com>
* Add support for macOS 11 and Apple Silicon (aka arm64)
As a side effect of this work use the system copy of libffi on macOS, and remove the vendored copy
* Support building on recent versions of macOS while deploying to older versions
This allows building installers on macOS 11 while still supporting macOS 10.9.
* bpo-35823: subprocess: Use vfork() instead of fork() on Linux when safe
When used to run a new executable image, fork() is not a good choice
for process creation, especially if the parent has a large working set:
fork() needs to copy page tables, which is slow, and may fail on systems
where overcommit is disabled, despite that the child is not going to
touch most of its address space.
Currently, subprocess is capable of using posix_spawn() instead, which
normally provides much better performance. However, posix_spawn() does not
support many of child setup operations exposed by subprocess.Popen().
Most notably, it's not possible to express `close_fds=True`, which
happens to be the default, via posix_spawn(). As a result, most users
can't benefit from faster process creation, at least not without
changing their code.
However, Linux provides vfork() system call, which creates a new process
without copying the address space of the parent, and which is actually
used by C libraries to efficiently implement posix_spawn(). Due to sharing
of the address space and even the stack with the parent, extreme care
is required to use vfork(). At least the following restrictions must hold:
* No signal handlers must execute in the child process. Otherwise, they
might clobber memory shared with the parent, potentially confusing it.
* Any library function called after vfork() in the child must be
async-signal-safe (as for fork()), but it must also not interact with any
library state in a way that might break due to address space sharing
and/or lack of any preparations performed by libraries on normal fork().
POSIX.1 permits to call only execve() and _exit(), and later revisions
remove vfork() specification entirely. In practice, however, almost all
operations needed by subprocess.Popen() can be safely implemented on
Linux.
* Due to sharing of the stack with the parent, the child must be careful
not to clobber local variables that are alive across vfork() call.
Compilers are normally aware of this and take extra care with vfork()
(and setjmp(), which has a similar problem).
* In case the parent is privileged, special attention must be paid to vfork()
use, because sharing an address space across different privilege domains
is insecure[1].
This patch adds support for using vfork() instead of fork() on Linux
when it's possible to do safely given the above. In particular:
* vfork() is not used if credential switch is requested. The reverse case
(simple subprocess.Popen() but another application thread switches
credentials concurrently) is not possible for pure-Python apps because
subprocess.Popen() and functions like os.setuid() are mutually excluded
via GIL. We might also consider to add a way to opt-out of vfork() (and
posix_spawn() on platforms where it might be implemented via vfork()) in
a future PR.
* vfork() is not used if `preexec_fn != None`.
With this change, subprocess will still use posix_spawn() if possible, but
will fallback to vfork() on Linux in most cases, and, failing that,
to fork().
[1] https://ewontfix.com/7
Co-authored-by: Gregory P. Smith [Google LLC] <gps@google.com>
close_range(2) should be preferred at all times if it's available, otherwise we'll use closefrom(2) if available with a fallback to fdwalk(3) or plain old loop over fd range in order of most efficient to least.
[note that this version does check for ENOSYS, but currently ignores all other errors]
Automerge-Triggered-By: @pablogsal
Add --with-experimental-isolated-subinterpreters build option to
configure: better isolate subinterpreters, experimental build mode.
When used, force the usage of the libc malloc() memory allocator,
since pymalloc relies on the unique global interpreter lock (GIL).
The os.putenv() and os.unsetenv() functions are now always available.
On non-Windows platforms, Python now requires setenv() and unsetenv()
functions to build.
Remove putenv_dict from posixmodule.c: it's not longer needed.
If setenv() C function is available, os.putenv() is now implemented
with setenv() instead of putenv(), so Python doesn't have to handle
the environment variable memory.
Provides a richer platform tag for AIX that we expect to be sufficient for PEP 425
binary distribution identification. Any backports to earlier Python versions will be
handled via setuptools.
Patch by Michael Felt.
Fix stdatomic.h header check for ICC compiler: the ICC implementation
lacks atomic_uintptr_t type which is needed by Python.
Test:
* atomic_int and atomic_uintptr_t types
* atomic_load_explicit() and atomic_store_explicit()
* memory_order_relaxed and memory_order_seq_cst constants
But don't test ATOMIC_VAR_INIT(): it's not used in Python.
* bpo-26836: Add os.memfd_create()
* Use the glibc wrapper for memfd_create()
Co-Authored-By: Christian Heimes <christian@python.org>
* Fix deletions caused by autoreconf.
* Use MFD_CLOEXEC as the default value for *flags*.
* Add memset_s to configure.ac.
* Revert memset_s changes.
* Apply the requested changes.
* Tweak the docs.
Release build and debug build are now ABI compatible: the Py_DEBUG
define no longer implies Py_TRACE_REFS define which introduces the
only ABI incompatibility.
A new "./configure --with-trace-refs" build option is now required to
get Py_TRACE_REFS define which adds sys.getobjects() function and
PYTHONDUMPREFS environment variable.
Changes:
* Add ./configure --with-trace-refs
* Py_DEBUG no longer implies Py_TRACE_REFS
Use autoconfig to probe for shm_open() and shm_unlink(). Set SHM_NEEDS_LIBRT if we must
link with librt to get the shm_* functions. Change setup.py to use the autoconfig defines. These
changes should make it more likely that _multiprocessing/posixshmem.c gets built correctly on
different platforms.
Use crypt_r() when available instead of crypt() in the crypt module.
As a nice side effect: This also avoids a memory sanitizer flake as clang msan doesn't know about crypt's internal libc allocated buffer.
It is unused.
<!--
Thanks for your contribution!
Please read this comment in its entirety. It's quite important.
# Pull Request title
It should be in the following format:
```
bpo-NNNN: Summary of the changes made
```
Where: bpo-NNNN refers to the issue number in the https://bugs.python.org.
Most PRs will require an issue number. Trivial changes, like fixing a typo, do not need an issue.
# Backport Pull Request title
If this is a backport PR (PR made against branches other than `master`),
please ensure that the PR title is in the following format:
```
[X.Y] <title from the original PR> (GH-NNNN)
```
Where: [X.Y] is the branch name, e.g. [3.6].
GH-NNNN refers to the PR number from `master`.
-->
Release GIL on grp.getgrnam(), grp.getgrgid(), pwd.getpwnam() and
pwd.getpwuid() if reentrant variants of these functions are available.
Patch by William Grzybowski.
Introduce a configure check for strsignal(3) which defines HAVE_STRSIGNAL for
signalmodule.c. Add some common signals on HP-UX. This change applies for
Windows and HP-UX.
Until now Python used a hard coded white list of default TLS cipher
suites. The old approach has multiple downsides. OpenSSL's default
selection was completely overruled. Python did neither benefit from new
cipher suites (ChaCha20, TLS 1.3 suites) nor blacklisted cipher suites.
For example we used to re-enable 3DES.
Python now defaults to OpenSSL DEFAULT cipher suite selection and black
lists all unwanted ciphers. Downstream vendors can override the default
cipher list with --with-ssl-default-suites.
Signed-off-by: Christian Heimes <christian@python.org>
glibc is deprecating libcrypt in favor of libxcrypt, however python assumes
that crypt.h will always be included. This change makes the header inclusion
explicit when libxcrypt is present on the system.
Add https://www.gnu.org/software/autoconf-archive/ax_check_openssl.html
to auto-detect compiler flags, linker flags and libraries to compile
OpenSSL extensions. The M4 macro uses pkg-config and falls back to
manual detection.
Add autoconf magic to detect usable X509_VERIFY_PARAM_set1_host()
and related functions.
Refactor setup.py to use new config vars to compile _ssl and _hashlib
modules.
Signed-off-by: Christian Heimes <christian@python.org>
This module has never been enabled by default, never worked correctly
on x86-64, and caused ABI problems that caused C extension
compatibility. See bpo-29137 for details/discussion.
Starting with AIX6.1 there is support in libc.a for uuid (RFC4122)
This patch provides the changes needed for this integration with the OS.
On AIX the base function is uuid_create() rather than uuid_generate_time()
The AIX uuid_t typedef is more aligned to the UUID field based definition
while the Linux typedef that is more aligned with UUID bytes
(or perhaps UUID bytes_le) definitions.
Modify the code to use ncurses is_pad() instead of checking WINDOW
_flags field. If your platform does not provide the is_pad(), the
existing way that checks the field will be enabled.
Note: This change does not drop support for platforms where do not
have both WINDOW _flags field and is_pad().
See PEP 539 for details.
Highlights of changes:
- Add Thread Specific Storage (TSS) API
- Document the Thread Local Storage (TLS) API as deprecated
- Update code that used TLS API to use TSS API
Python requires C implementations provide memmove, so we shouldn't need to check for it. The only place using this configure check was expat, where we can simply always define HAVE_MEMMOVE.
* bpo-27584: New addition of vSockets to the python socket module
Support for AF_VSOCK on Linux only
* bpo-27584: Fixes for V2
Fixed syntax and naming problems.
Fixed #ifdef AF_VSOCK checking
Restored original aclocal.m4
* bpo-27584: Fixes for V3
Added checking for fcntl and thread modules.
* bpo-27584: Fixes for V4
Fixed white space error
* bpo-27584: Fixes for V5
Added back comma in (CID, port).
* bpo-27584: Fixes for V6
Added news file.
socket.rst now reflects first Linux introduction of AF_VSOCK.
Fixed get_cid in test_socket.py.
Replaced PyLong_FromLong with PyLong_FromUnsignedLong in socketmodule.c
Got rid of extra AF_VSOCK #define.
Added sockaddr_vm to sock_addr.
* bpo-27584: Fixes for V7
Minor cleanup.
* bpo-27584: Fixes for V8
Put back #undef AF_VSOCK as it is necessary when vm_sockets.h is not installed.
Include sys/sysmacros.h for major(), minor(), and makedev(). GNU C libray
plans to remove the functions from sys/types.h.
Signed-off-by: Christian Heimes <christian@python.org>
`PYTHONFRAMEWORK` is defined in `Makefile` and it shoulnd't be used
in `pyconfig.h`.
`sysconfig.py --generate-posix-vars` reads config vars from Makefile
and `pyconfig.h`. Conflicting variables should be avoided.
Especially, string config variables in Makefile are unquoted, but
in `pyconfig.h` are keep quoted. So it should be private (starts with
underscore).
- new PYTHONCOERCECLOCALE config setting
- coerces legacy C locale to C.UTF-8, C.utf8 or UTF-8 by default
- always uses C.UTF-8 on Android
- uses `surrogateescape` on stdin and stdout in the coercion
target locales
- configure option to disable locale coercion at build time
- configure option to disable C locale warning at build time
Patch by Masayuki Yamamoto, reviewed and rebased by Erik Bray.
This is a first step on the long road toward resupporting Cygwin, which does
not provide siginfo_t.si_band.
Tested on macOS 10.11 dtrace, Ubuntu 16.04 SystemTap, and libbcc.
Largely based by an initial patch by Jesús Cea Avión, with some
influence from Dave Malcolm's SystemTap patch and Nikhil Benesch's
unification patch.
Things deliberately left out for simplicity:
- ustack helpers, I have no way of testing them at this point since
they are Solaris-specific
- PyFrameObject * in function__entry/function__return, this is
SystemTap-specific
- SPARC support
- dynamic tracing
- sys module dtrace facility introspection
All of those might be added later.
Issue #26839: On Linux, os.urandom() now calls getrandom() with GRND_NONBLOCK
to fall back on reading /dev/urandom if the urandom entropy pool is not
initialized yet. Patch written by Colm Buckley.
function instead of the getentropy() function. The getentropy() function is
blocking to generate very good quality entropy, os.urandom() doesn't need such
high-quality entropy.
"_Atomic void*" types work. Change needed on FreeBSD 10 where stdatomic.h is
available but the compiler fails on "_Atomic void*" with "_Atomic cannot be
applied to incomplete type 'void'".
suboptimal by closing all possible file descriptors rather than just
the open ones in the child process before exec().
It now closes only the open fds when it is possible to safely determine what
those are.
suboptimal by closing all possible file descriptors rather than just
the open ones in the child process before exec().
It now closes only the open fds when it is possible to safely determine what
those are.
Christian Heimes
Ronald Oussoren
Alexey Izbyshev
Kyle Evans
wasiher
Victor Stinner
karl ding
Zackery Spytz
Stefan Krah
Michael Felt
Benjamin Peterson
Jakub Kulík
Sergey Fedoseev
Pablo Galindo
David Carlier
pxinwr
Victor Stinner
Inada Naoki
Neil Schemenauer
Joannah Nanjekye
Gregory P. Smith
Bjorn Andersson
William Grzybowski
Michael Osipov
Eitan Adler
Serhiy Storchaka
Antoine Pitrou
stratakis
Nathaniel J. Smith
xdegaye
Berker Peksag
Masayuki Yamamoto
pdox
caavery
Nick Coghlan
Xavier de Gaye
Zachary Ware
Łukasz Langa
Victor Stinner
Martin Panter
Larry Hastings
Christian Heimes
Charles-François Natali
Mark Dickinson
doko@ubuntu.com
Antoine Pitrou
Martin v. Löwis
Victor Stinner
Jesus Cea
Charles-François Natali