Summary of changes:
1. Coroutines now have a distinct, separate from generators
type at the C level: PyGen_Type, and a new typedef PyCoroObject.
PyCoroObject shares the initial segment of struct layout with
PyGenObject, making it possible to reuse existing generators
machinery. The new type is exposed as 'types.CoroutineType'.
As a consequence of having a new type, CO_GENERATOR flag is
no longer applied to coroutines.
2. Having a separate type for coroutines made it possible to add
an __await__ method to the type. Although it is not used by the
interpreter (see details on that below), it makes coroutines
naturally (without using __instancecheck__) conform to
collections.abc.Coroutine and collections.abc.Awaitable ABCs.
[The __instancecheck__ is still used for generator-based
coroutines, as we don't want to add __await__ for generators.]
3. Add new opcode: GET_YIELD_FROM_ITER. The opcode is needed to
allow passing native coroutines to the YIELD_FROM opcode.
Before this change, 'yield from o' expression was compiled to:
(o)
GET_ITER
LOAD_CONST
YIELD_FROM
Now, we use GET_YIELD_FROM_ITER instead of GET_ITER.
The reason for adding a new opcode is that GET_ITER is used
in some contexts (such as 'for .. in' loops) where passing
a coroutine object is invalid.
4. Add two new introspection functions to the inspec module:
getcoroutinestate(c) and getcoroutinelocals(c).
5. inspect.iscoroutine(o) is updated to test if 'o' is a native
coroutine object. Before this commit it used abc.Coroutine,
and it was requested to update inspect.isgenerator(o) to use
abc.Generator; it was decided, however, that inspect functions
should really be tailored for checking for native types.
6. sys.set_coroutine_wrapper(w) API is updated to work with only
native coroutines. Since types.coroutine decorator supports
any type of callables now, it would be confusing that it does
not work for all types of coroutines.
7. Exceptions logic in generators C implementation was updated
to raise clearer messages for coroutines:
Before: TypeError("generator raised StopIteration")
After: TypeError("coroutine raised StopIteration")
Known limitations of the current implementation:
- documentation changes are incomplete
- there's a reference leak I haven't tracked down yet
The leak is most visible by running:
./python -m test -R3:3 test_importlib
However, you can also see it by running:
./python -X showrefcount
Importing the array or _testmultiphase modules, and
then deleting them from both sys.modules and the local
namespace shows significant increases in the total
number of active references each cycle. By contrast,
with _testcapi (which continues to use single-phase
initialisation) the global refcounts stabilise after
a couple of cycles.
Replaces the PyList_GET_ITEM and PyList_SET_ITEM macros with normal array
accesses. Replace the siftup unpredicatable branch with arithmetic.
Replace the rc == -1 tests with rc < 0. Gives nicer looking assembly
with both Clang and GCC-4.9. Also gives a small performance both for both.
Add also a new _PyTime_AsMicroseconds() function.
threading.TIMEOUT_MAX is now be smaller: only 292 years instead of 292,271
years on 64-bit system for example. Sorry, your threads will hang a *little
bit* shorter. Call me if you want to ensure that your locks wait longer, I can
share some tricks with you.
* _PyTime_AsTimeval() now ensures that tv_usec is always positive
* _PyTime_AsTimespec() now ensures that tv_nsec is always positive
* _PyTime_AsTimeval() now returns an integer on overflow instead of raising an
exception
* Rename _PyTime_FromObject() to _PyTime_FromSecondsObject()
* Add _PyTime_AsNanosecondsObject() and _testcapi.pytime_fromsecondsobject()
* Add unit tests
In practice, _PyTime_t is a number of nanoseconds. Its C type is a 64-bit
signed number. It's integer value is in the range [-2^63; 2^63-1]. In seconds,
the range is around [-292 years; +292 years]. In term of Epoch timestamp
(1970-01-01), it can store a date between 1677-09-21 and 2262-04-11.
The API has a resolution of 1 nanosecond and use integer number. With a
resolution on 1 nanosecond, 64-bit IEEE 754 floating point numbers loose
precision after 194 days. It's not the case with this API. The drawback is
overflow for values outside [-2^63; 2^63-1], but these values are unlikely for
most Python modules, except of the datetime module.
New functions:
- _PyTime_GetMonotonicClock()
- _PyTime_FromObject()
- _PyTime_AsMilliseconds()
- _PyTime_AsTimeval()
This change uses these new functions in time.sleep() to avoid rounding issues.
The new API will be extended step by step, and the old API will be removed step
by step. Currently, some code is duplicated just to be able to move
incrementally, instead of pushing a large change at once.
I expected more users of _Py_wstat(), but in practice it's only used by
Modules/getpath.c. Move the function because it's not needed on Windows.
Windows uses PC/getpathp.c which uses the Win32 API (ex: GetFileAttributesW())
not the POSIX API.
which returned an invalid result (result+error or no result without error) in
the exception message.
Add also unit test to check that the exception contains the name of the
function.
Special case: the final _PyEval_EvalFrameEx() check doesn't mention the
function since it didn't execute a single function but a whole frame.
interrupted by a signal
Add a new _PyTime_AddDouble() function and remove _PyTime_ADD_SECONDS() macro.
The _PyTime_ADD_SECONDS only supported an integer number of seconds, the
_PyTime_AddDouble() has subsecond resolution.
EINTR error and special cases for Windows.
These functions now truncate the length to PY_SSIZE_T_MAX to have a portable
and reliable behaviour. For example, read() result is undefined if counter is
greater than PY_SSIZE_T_MAX on Linux.
* _Py_open() now raises exceptions on error. If open() fails, it raises an
OSError with the filename.
* _Py_open() now releases the GIL while calling open()
* Add _Py_open_noraise() when _Py_open() cannot be used because the GIL is not
held
Disable completly pyatomic.h on C++, because <stdatomic.h> is not compatible with C++.
<pyatomic.h> is only needed by the optimized PyThreadState_GET() macro in
pystate.h. Instead, declare PyThreadState_GET() as an alias to
PyThreadState_Get(), as done for limited API.
raise a SystemError if a function returns a result and raises an exception.
The SystemError is chained to the previous exception.
Refactor also PyObject_Call() and PyCFunction_Call() to make them more readable.
Remove some checks which became useless (duplicate checks).
Change reviewed by Serhiy Storchaka.
Declarations of Windows-specific auxilary functions need Windows types
from windows.h. Instead of including windows.h in Python.h and making
it available to all Windows users, it is simpler and safer just move
declarations to the single file that needs them.
- Move all Py_LIMITED_API exclusions together under one #ifndef
- Group PyAPI_FUNC functions and PyAPI_DATA together.
- Bring related comments together and put them in the appropriate section.
threading.Lock.acquire(), threading.RLock.acquire() and socket operations now
use a monotonic clock, instead of the system clock, when a timeout is used.
Other changes:
* The whole _PyTime API is private (not defined if Py_LIMITED_API is set)
* _PyTime_gettimeofday_info() also returns -1 on error
* Simplify PyTime_gettimeofday(): only use clock_gettime(CLOCK_REALTIME) or
gettimeofday() on UNIX. Don't fallback to ftime() or time() anymore.
name, and use it in the representation of a generator (``repr(gen)``). The
default name of the generator (``__name__`` attribute) is now get from the
function instead of the code. Use ``gen.gi_code.co_name`` to get the name of
the code.
PyObject_Calloc(), _PyObject_GC_Calloc(). bytes(int) and bytearray(int) are now
using ``calloc()`` instead of ``malloc()`` for large objects which is faster
and use less memory (until the bytearray buffer is filled with data).
now register both filenames in the exception on failure.
This required adding new C API functions allowing OSError exceptions
to reference two filenames instead of one.
The new syntax is highly human readable while still preventing false
positives. The syntax also extends Python syntax to denote "self" and
positional-only parameters, allowing inspect.Signature objects to be
totally accurate for all supported builtins in Python 3.4.
- io.TextIOWrapper (and hence the open() builtin) now use the
internal codec marking system added for issue #19619
- also tweaked the C code to only look up the encoding once,
rather than multiple times
- the existing output type checks remain in place to deal with
unmarked third party codecs.
annotate text signatures in docstrings, resulting in fewer false
positives. "self" parameters are also explicitly marked, allowing
inspect.Signature() to authoritatively detect (and skip) said parameters.
Issue #20326: Argument Clinic now generates separate checksums for the
input and output sections of the block, allowing external tools to verify
that the input has not changed (and thus the output is not out-of-date).
PyMethodDescr_Type, _PyMethodWrapper_Type, and PyWrapperDescr_Type)
have been modified to provide introspection information for builtins.
Also: many additional Lib, test suite, and Argument Clinic fixes.
Yury Selivanov
Serhiy Storchaka
Eric Snow
Benjamin Peterson
Larry Hastings
Steve Dower
Nick Coghlan
Raymond Hettinger
Gregory P. Smith
Berker Peksag
Victor Stinner
Stefan Krah
Ethan Furman
Antoine Pitrou
Martin v. Löwis
Kushal Das
Andrew Kuchling