start for the C implemention of new pickle LONG1 and LONG4 opcodes (the
linear-time way to pickle a long is to call _PyLong_AsByteArray, but
the caller has no idea how big an array to allocate, and correct
calculation is a bit subtle).
compare against "the other" argument, we raise TypeError,
in order to prevent comparison from falling back to the
default (and worse than useless, in this case) comparison
by object address.
That's fine so far as it goes, but leaves no way for
another date/datetime object to make itself comparable
to our objects. For example, it leaves Marc-Andre no way
to teach mxDateTime dates how to compare against Python
dates.
Discussion on Python-Dev raised a number of impractical
ideas, and the simple one implemented here: when we don't
know how to compare against "the other" argument, we raise
TypeError *unless* the other object has a timetuple attr.
In that case, we return NotImplemented instead, and Python
will give the other object a shot at handling the
comparison then.
Note that comparisons of time and timedelta objects still
suffer the original problem, though.
This gives much the same treatment to datetime.fromtimestamp(stamp, tz) as
the last batch of checkins gave to datetime.now(tz): do "the obvious"
thing with the tz argument instead of a senseless thing.
checked in two days agao:
Refactoring of, and new rules for, dt.astimezone(tz).
dt must be aware now, and tz.utcoffset() and tz.dst() must not return None.
The old dt.astimezone(None) no longer works to change an aware datetime
into a naive datetime; use dt.replace(tzinfo=None) instead.
The tzinfo base class now supplies a new fromutc(self, dt) method, and
datetime.astimezone(tz) invokes tz.fromutc(). The default implementation
of fromutc() reproduces the same results as the old astimezone()
implementation, but tzinfo subclasses can override fromutc() if the
default implementation isn't strong enough to get the correct results
in all cases (for example, this may be necessary if a tzinfo subclass
models a time zone whose "standard offset" (wrt UTC) changed in some
year(s), or in some variations of double-daylight time -- the creativity
of time zone politics can't be captured in a single default implementation).
60: Added support for the SkippedEntityHandler, new in Expat 1.95.4.
61: Added support for namespace prefixes, which can be enabled by setting the
"namespace_prefixes" attribute on the parser object.
65: Disable profiling changes for Python 2.0 and 2.1.
66: Update pyexpat to export the Expat 1.95.5 XML_GetFeatureList()
information, and tighten up a type declaration now that Expat is using
an incomplete type rather than a void * for the XML_Parser type.
67: Clarified a comment.
Added support for XML_UseForeignDTD(), new in Expat 1.95.5.
68: Refactor to avoid partial duplication of the code to construct an
ExpatError instance, and actually conform to the API for the exception
instance as well.
69: Remove some spurious trailing whitespace.
Add a special external-entity-ref handler that gets installed once a
handler has raised a Python exception; this can cancel actual parsing
earlier if there's an external entity reference in the input data
after the the Python excpetion has been raised.
70: Untabify APPEND.
71: Backport PyMODINIT_FUNC for 2.2 and earlier.
When daylight time ends, an hour repeats on the local clock (for example,
in US Eastern, the clock jumps from 1:59 back to 1:00 again). Times in
the repeated hour are ambiguous. A tzinfo subclass that wants to play
with astimezone() needs to treat times in the repeated hour as being
standard time. astimezone() previously required that such times be
treated as daylight time. There seems no killer argument either way,
but Guido wants the standard-time version, and it does seem easier the
new way to code both American (local-time based) and European (UTC-based)
switch rules, and the astimezone() implementation is simpler.
underlying DB has already been closed (and thus all of its cursors).
This fixes a potential segfault.
SF pybsddb bug id 667343
bugfix: close the DB object when raising an exception due to an error
during DB.open. This prevents an exception when closing the
environment about not all databases being closed.
SF pybsddb bug id 667340
hoped it would be, but not too bad. A test had to change:
time.__setstate__() can no longer add a non-None tzinfo member to a time
object that didn't already have one, since storage for a tzinfo member
doesn't exist in that case.
into time. This is little more than *exporting* the datetimetz object
under the name "datetime", and similarly for timetz. A good implementation
of this change requires more work, but this is fully functional if you
don't stare too hard at the internals (e.g., right now a type named
"datetime" shows up as a base class of the type named "datetime"). The
docs also need extensive revision, not part of this checkin.
The attached patch enables shared extension
modules to build cleanly under Cygwin without
moving the static initialization of certain function
pointers (i.e., ones exported from the Python
DLL core) to a module initialization function.
Additionally, this patch fixes the modules that
have been changed in the past to accommodate
Cygwin.
cases, plus even tougher tests of that. This implementation follows
the correctness proof very closely, and should also be quicker (yes,
I wrote the proof before the code, and the code proves the proof <wink>).
Lesson learned: kids should not be allowed to use API's starting
with an underscore :-/
zipimport in 2.3a1 is even more broken than I thought: I attemped
to _PyString_Resize a string created by PyString_FromStringAndSize,
which fails for strings with length 0 or 1 since the latter returns
an interned string in those cases. This would cause a SystemError
with empty source files (and no matching pyc) in the zip archive.
I rewrote the offending code to simply allocate a new buffer and
avoid _PyString_Resize altogether.
Added a test that would've caught the problem.
(or None) now. In 2.3a1 they could also return an int or long, but that
was an unhelpfully redundant leftover from an earlier version wherein
they couldn't return a timedelta. TOOWTDI.
On Windows, it was very common to get microsecond values (out of
.today() and .now()) of the form 480999, i.e. with three trailing
nines. The platform precision is .001 seconds, and fp rounding
errors account for the rest. Under the covers, that 480999 started
life as the fractional part of a timestamp, like .4809999978.
Rounding that times 1e6 cures the irritation.
Confession: the platform precision isn't really .001 seconds. It's
usually worse. What actually happens is that MS rounds a cruder value
to a multiple of .001, and that suffers its own rounding errors.
A tiny bit of refactoring added a new internal utility to round
doubles.
the test set as it only tested with a zip archive in the current directory,
but it doesn't work at all for packages when the zip archive was specified
as an absolute path. It's a real embarrassing bug: a strchr call should
have been strrchr; fever apparently implies dyslexia.
Second stupid bug: the zipimport test failed with a name error
__importer__ (which I had renamed to __loader__ everywhere but here).
I would've sworn I ran the test after that change but that can't be true.
What I don't understand that noone reported a failing test_zipimport.py
before the release of 2.3a1.
suggestion from Guido, along with a formal correctness proof of the
trickiest bit. The intricacy of the proof reveals how delicate this
is, but also how robust the conclusion: correctness doesn't rely on
dst() returning +- one hour (not all real time zones do!), it only
relies on:
1. That dst() returns a (any) non-zero value if and only if daylight
time is in effect.
and
2. That the tzinfo subclass implements a consistent notion of time zone.
The meaning of "consistent" was a hidden assumption, which is now an
explicit requirement in the docs. Alas, it's an unverifiable (by the
datetime implementation) requirement, but so it goes.
find a more elegant algorithm (OTOH, the hairy new implementation allows
user-written tzinfo classes to be elegant, so it's a big win even if
astimezone() remains hairy).
Darn! I've only got 10 minutes left to get falling-down drunk! I suppose
I'll have to smoke crack instead now.
The attached patch enables Cygwin Python to
build cleanly against the latest Cygwin Tcl/Tk
which is based on Tcl/Tk 8.3. It also prevents
building against the real X headers, if installed.
A variety of changes from Michael Hudson to get the compiler working
with 2.3. The primary change is the handling of SET_LINENO:
# The set_lineno() function and the explicit emit() calls for
# SET_LINENO below are only used to generate the line number table.
# As of Python 2.3, the interpreter does not have a SET_LINENO
# instruction. pyassem treats SET_LINENO opcodes as a special case.
A few other small changes:
- Remove unused code from pycodegen and pyassem.
- Fix error handling in parsermodule. When PyParser_SimplerParseString()
fails, it sets an exception with detailed info. The parsermodule
was clobbering that exception and replacing it was a generic
"could not parse string" exception. Keep the original exception.
an idea from Guido. This restores that the datetime implementation
never passes a datetime d to a tzinfo method unless d.tzinfo is the
tzinfo instance whose method is being called. That in turn allows
enormous simplifications in user-written tzinfo classes (see the Python
sandbox US.py and EU.py for fully fleshed-out examples).
d.astimezone(tz) also raises ValueError now if d lands in the one hour
of the year that can't be expressed in tz (this can happen iff tz models
both standard and daylight time). That it used to return a nonsense
result always ate at me, and it turned out that it seemed impossible to
force a consistent nonsense result under the new implementation (which
doesn't know anything about how tzinfo classes implement their methods --
it can only infer properties indirectly). Guido doesn't like this --
expect it to change.
New tests of conversion between adjacent DST-aware timezones don't pass
yet, and are commented out.
Running the datetime tests in a loop under a debug build leaks 9
references per test run, but I don't believe the datetime code is the
cause (it didn't leak the last time I changed the C code, and the leak
is the same if I disable all the tests that invoke the only function
that changed here). I'll pursue that next.
devices(), stereodevices(), recdevices() ->
controls(), stereocontrols(), reccontrols()
Based on recommendation of Hannu Savolainen <hannu@opensound.com>:
The right term to use for things like bass/treble/mic/vol/etc is
"control".
"Device" refers to different mixer devices (/dev/mixer0 to /dev/mixerN).
"Channel" cannot be used because it refers to mono/stereo/multich
channels. In fact most mixer controls have left/right channels so ...
- new import hooks in import.c, exposed in the sys module
- new module called 'zipimport'
- various changes to allow bootstrapping from zip files
I hope I didn't break the Windows build (or anything else for that
matter), but then again, it's been sitting on sf long enough...
Regarding the latest discussions on python-dev: zipimport sets
pkg.__path__ as specified in PEP 273, and likewise, sys.path item such as
/path/to/Archive.zip/subdir/ are supported again.
make the callers figure out the right tzinfo arguments to pass, instead of
making the callees guess. The code is uglier this way, but it's less
brittle (when the callee guesses, the caller can get surprised).
of the timetz case. A tzinfo method will always see a datetimetz arg,
or None, now. In the former case, it's still possible that it will get
a datetimetz argument belonging to a different timezone. That will get
fixed next.
Check for readline 2.2 features. This should make it possible to
compile readline.c again with GNU readline versions 2.0 or 2.1; this
ability was removed in readline.c rev. 2.49. Apparently the older
versions are still in widespread deployment on older Solaris
installations. With an older readline, completion behavior is subtly
different (a space is always added).
* channels() -> devices()
* stereochannels() -> stereodevices()
* recchannels() -> recdevices()
* getvol() -> get()
* setvol() -> set()
This is for (slightly) more consistency with the OSS ioctl names
(READ_DEVMASK, READ_RECMASK, READ_STEREODEVS).
Also make sure the C function names correspond more closely to the
Python method names for mixer methods.
Obtain cleaner coding and a system wide
performance boost by using the fast, pre-parsed
PyArg_Unpack function instead of PyArg_ParseTuple
function which is driven by a format string.
This can cause core dumps when Python runs. Python relies on the 754-
(and C99-) mandated default "non-stop" mode for FP exceptions. This
patch from Ben Laurie disables at least one FP exception on FreeBSD at
Python startup time.
operands have identical tzinfo members (meaning object identity -- "is").
I misunderstood the intent here, reading wrong conclusion into
conflicting clues.
be trusted with years before 1900, so now we raise ValueError if a date or
datetime or datetimetz .strftime() method is called with a year before
1900.
such that the datetime tests failed if the envar PYTHON2K was set.
This is an utter mess, and the datetime module's strftime functions
inherit it. I suspect that, regardless of the PYTHON2K setting, and
regardless of platform limitations, the datetime strftime wrappers
will end up delivering nonsense results (or bogus exceptions) for
any year before 1900. I should probably just refuse to accept years
earlier than that -- else we'll have to implement strftime() by hand.
{timetz,datetimetz}.{utcoffset,dst}() now return a timedelta (or None)
instead of an int (or None).
tzinfo.{utcoffset,dst)() can now return a timedelta (or an int, or None).
Curiously, this was much easier to do in the C implementation than in the
Python implementation (which lives in the Zope3 code tree) -- the C code
already had lots of hair to extract C ints from offset objects, and used
C ints internally.
used that.
wrap_strftime(): Removed the most irritating uses of buf.
TestDate.test_ordinal_conversions(): The C implementation is fast enough
that we can afford to check the endpoints of every year. Also added
tm_yday tests at the endpoints.
PyMapping_Check() doesn't guarantee that PyMapping_Size() won't raise
an exception, nor that keys and values are lists.
Also folded some long lines and did a little whitespace normalization.
Probably a 2.2 backport candidate.
* rename oss_t to lad_t, Ladtype to OSSType,
* rename lad_*() methods to oss_*()
* rename lad_methods list to oss_methods
Patch and impetus supplied by Nicholas FitzRoy-Dale <wzdd@lardcave.net>.
Use OSSAudioError much less frequently -- all real I/O errors (ie. any
time open(), read(), write(), ioctl(), or select() return an error)
become IOError. OSSAudioError is only used now for bad open() mode.
Added _EXPORT_INT macro to export an integer constant to Python-space.
Use it for all the AFMT_* constants, and update the list of AFMT_*
constants to match what's in Linux 2.4: add AFMT_{QUERY,IMA_ADPCM,
MPEG,AC3}. This should probably be tested with older versions of OSS,
eg. with Linux 2.2 and 2.0.
Export all SNDCTL_* ioctl numbers (where "all" is the set found in
/usr/include/linux/soundcard.h on my Debian 3.0 system -- again
Linux 2.4). Again needs to be tested with older OSS versions.
it impossible to access blocking mode!
* Rename write() to writeall(), and add a write() method that just
does one write().
* Rearrange/simplify writeall(): in particular, don't supply a timeout
to select(). Let it block forever if it has to.
* Add a bunch of simple ioctl() wrappers: nonblock(), setfmt(),
getfmts(), channels(), speed(), sync(), reset(), post(). These
wrap, respectively, SNDCTL_DSP_NONBLOCK, SNDCTL_DSP_SETFMT,
SNDCTL_DSP_GETFMTS, etc.
* Reduce flush() (which was a wrapper for the SNDCTL_DSP_SYNC ioctl) to
an alias for sync().
* Rearrange the lad_methods list to reflect the order in which the
methods are defined, and add some grouping comments.
This module is a replacement for linuxaudiodev, which will eventually
be deprecated.
Initial revision is rev 2.20 of linuxaudiodev.c, with a rewritten
header comment.
consistency with the built-in open() (and every other sane open()
function, for that matter). The two valid ways to call this open() are
now open(mode) and open(device, mode).
For backwards compatibility, retain the old open(mode) calling syntax --
this makes the error message when you call open(device) a bit confusing,
but oh well.
This is the first half of SF patch #644977.
Tim Peters
Barry Warsaw
Fred Drake
Guido van Rossum
Martin v. Löwis
Neal Norwitz
Raymond Hettinger
Gregory P. Smith
Jack Jansen
Jason Tishler
Just van Rossum
Andrew MacIntyre
Jeremy Hylton
Greg Ward
Marc-André Lemburg
Skip Montanaro