Use the new public Raw functions:
* _PyTime_PerfCounterUnchecked() with PyTime_PerfCounterRaw()
* _PyTime_TimeUnchecked() with PyTime_TimeRaw()
* _PyTime_MonotonicUnchecked() with PyTime_MonotonicRaw()
Remove internal functions:
* _PyTime_PerfCounterUnchecked()
* _PyTime_TimeUnchecked()
* _PyTime_MonotonicUnchecked()
We have only been tracking each module's PyModuleDef. However, there are some problems with that. For example, in some cases we load single-phase init extension modules from def->m_base.m_init or def->m_base.m_copy, but if multiple modules share a def then we can end up with unexpected behavior.
With this change, we track the following:
* PyModuleDef (same as before)
* for some modules, its init function or a copy of its __dict__, but specific to that module
* whether it is a builtin/core module or a "dynamic" extension
* the interpreter (ID) that owns the cached __dict__ (only if cached)
This also makes it easier to remember the module's kind (e.g. single-phase init) and if loading it previously failed, which I'm doing separately.
* Add CALL_PY_GENERAL, CALL_BOUND_METHOD_GENERAL and call CALL_NON_PY_GENERAL specializations.
* Remove CALL_PY_WITH_DEFAULTS specialization
* Use CALL_NON_PY_GENERAL in more cases when otherwise failing to specialize
Use _PyDeadline_Init() and _PyDeadline_Get() in
EnterNonRecursiveMutex() of thread_nt.h.
_PyDeadline_Get() uses the monotonic clock which is now the same as
the perf counter clock on all platforms. So this change does not
cause any behavior change. It just reuses existing helper functions.
This PR adds the ability to enable the GIL if it was disabled at
interpreter startup, and modifies the multi-phase module initialization
path to enable the GIL when loading a module, unless that module's spec
includes a slot indicating it can run safely without the GIL.
PEP 703 called the constant for the slot `Py_mod_gil_not_used`; I went
with `Py_MOD_GIL_NOT_USED` for consistency with gh-104148.
A warning will be issued up to once per interpreter for the first
GIL-using module that is loaded. If `-v` is given, a shorter message
will be printed to stderr every time a GIL-using module is loaded
(including the first one that issues a warning).
The function returns `True` or `False` depending on whether the GIL is
currently enabled. In the default build, it always returns `True`
because the GIL is always enabled.
Most module names are interned and immortalized, but the main
module was not. This partially addresses a scaling bottleneck in the
free-threaded when creating closure concurrently in the main module.
The module itself is a thin wrapper around calls to functions in
`Python/codecs.c`, so that's where the meaningful changes happened:
- Move codecs-related state that lives on `PyInterpreterState` to a
struct declared in `pycore_codecs.h`.
- In free-threaded builds, add a mutex to `codecs_state` to synchronize
operations on `search_path`. Because `search_path_mutex` is used as a
normal mutex and not a critical section, we must be extremely careful
with operations called while holding it.
- The codec registry is explicitly initialized as part of
`_PyUnicode_InitEncodings` to simplify thread-safety.
* Target _FOR_ITER_TIER_TWO at POP_TOP following the matching END_FOR
* Modify _GUARD_NOT_EXHAUSTED_RANGE, _GUARD_NOT_EXHAUSTED_LIST and _GUARD_NOT_EXHAUSTED_TUPLE so that they also target the POP_TOP following the matching END_FOR
Add "Raw" variant of PyTime functions:
* PyTime_MonotonicRaw()
* PyTime_PerfCounterRaw()
* PyTime_TimeRaw()
Changes:
* Add documentation and tests. Tests release the GIL while calling
raw clock functions.
* py_get_system_clock() and py_get_monotonic_clock() now check that
the GIL is hold by the caller if raise_exc is non-zero.
* Reimplement "Unchecked" functions with raw clock functions.
Co-authored-by: Petr Viktorin <encukou@gmail.com>
Account for `add_stopiteration_handler` pushing a block for `async with`.
To allow generator functions that previously almost hit the `CO_MAXBLOCKS`
limit by nesting non-async blocks, the limit is increased by 1.
This increase allows one more block in non-generator functions.
The code for Tier 2 is now only compiled when configured
with `--enable-experimental-jit[=yes|interpreter]`.
We drop support for `PYTHON_UOPS` and -`Xuops`,
but you can disable the interpreter or JIT
at runtime by setting `PYTHON_JIT=0`.
You can also build it without enabling it by default
using `--enable-experimental-jit=yes-off`;
enable with `PYTHON_JIT=1`.
On Windows, the `build.bat` script supports
`--experimental-jit`, `--experimental-jit-off`,
`--experimental-interpreter`.
In the C code, `_Py_JIT` is defined as before
when the JIT is enabled; the new variable
`_Py_TIER2` is defined when the JIT *or* the
interpreter is enabled. It is actually a bitmask:
1: JIT; 2: default-off; 4: interpreter.
Avoid detaching thread state when stopping the world. When re-attaching
the thread state, the thread would attempt to resume the top-most
critical section, which might now be held by a thread paused for our
stop-the-world request.
Deferred reference counting is not fully implemented yet. As a temporary
measure, we immortalize objects that would use deferred reference
counting to avoid multi-threaded scaling bottlenecks.
This is only performed in the free-threaded build once the first
non-main thread is started. Additionally, some tests, including refleak
tests, suppress this behavior.
Basically, I've turned most of _PyImport_LoadDynamicModuleWithSpec() into two new functions (_PyImport_GetModInitFunc() and _PyImport_RunModInitFunc()) and moved the rest of it out into _imp_create_dynamic_impl(). There shouldn't be any changes in behavior.
This change makes some future changes simpler. This is particularly relevant to potentially calling each module init function in the main interpreter first. Thus the critical part of the PR is the addition of _PyImport_RunModInitFunc(), which is strictly focused on running the init func and validating the result. A later PR will take it a step farther by capturing error information rather than raising exceptions.
FWIW, this change also helps readers by clarifying a bit more about what happens when an extension/builtin module is imported.
These are cleanups I've pulled out of gh-118116. Mostly, this change moves code around to align with some future changes and to improve clarity a little. There is one very small change in behavior: we now add the module to the per-interpreter caches after updating the global state, rather than before.
This is a collection of very basic cleanups I've pulled out of gh-118116. It is mostly renaming variables and moving a couple bits of code in functionally equivalent ways.
Makes sys.settrace, sys.setprofile, and monitoring generally thread-safe.
Mostly uses a stop-the-world approach and synchronization around the code object's _co_instrumentation_version. There may be a little bit of extra synchronization around the monitoring data that's required to be TSAN clean.
We were under-counting calls in `_PyEvalFramePushAndInit`
because the `CALL_STAT_INC` macro was redefined to a no-op
for the Tier 2 interpreter. The fix is not to `#undef` it at all.
This results in ~37% more "Frames pushed" reported
under "Call stats".
Quiet erroneous TSAN reports of data races in `_PySeqLock`
TSAN reports a couple of data races between the compare/exchange in
`_PySeqLock_LockWrite` and the non-atomic loads in `_PySeqLock_{Abandon,Unlock}Write`.
This is another instance of TSAN incorrectly modeling failed compare/exchange
as a write instead of a load.
TSAN erroneously reports a data race between the `_Py_atomic_compare_exchange_int`
on `tstate->state` in `tstate_try_attach()` and the non-atomic load of
`tstate->state` in `start_the_world`. The `_Py_atomic_compare_exchange_int` fails,
but TSAN erroneously treats it as a store.
This is similar to the situation with threading._DummyThread. The methods (incl. __del__()) of interpreters.Interpreter objects must be careful with interpreters not created by interpreters.create(). The simplest thing to start with is to disable any method that modifies or runs in the interpreter. As part of this, the runtime keeps track of where an interpreter was created. We also handle interpreter "refcounts" properly.
The free-threaded build does not currently support the combination of
single-phase init modules and non-isolated subinterpreters. Ensure that
`check_multi_interp_extensions` is always `True` for subinterpreters in
the free-threaded build so that importing these modules raises an
`ImportError`.
Nikita Sobolev
Pablo Galindo Salgado
Victor Stinner
Eric Snow
Tian Gao
Mark Shannon
Irit Katriel
Brandt Bucher
Sam Gross
Brett Simmers
Carl Meyer
Jelle Zijlstra
Raphael Gaschignard
NGRsoftlab
Crowthebird
Hugo van Kemenade
Anthony Shaw
Guido van Rossum
Ken Jin
Dino Viehland
Nice Zombies
Malcolm Smith
Savannah Ostrowski
Alex Turner
neonene
mpage
Joe Jevnik
Russell Keith-Magee
Donghee Na
Kirill Podoprigora
Jeff Glass
Serhiy Storchaka