When compiled with `USE_ZLIB_CRC32` defined (`configure` sets this on POSIX systems), `binascii.crc32(...)` failed to compute the correct value when the input data was >= 4GiB. Because the zlib crc32 API is limited to a 32-bit length.
This lines it up with the `zlib.crc32(...)` implementation that doesn't have that flaw.
**Performance:** This also adopts the same GIL releasing for larger inputs logic that `zlib.crc32` has, and causes the Windows build to always use zlib's crc32 instead of our slow C code as zlib is a required build dependency on Windows.
This changes cancelling() and uncancel() to return the count of pending cancellations.
This can be used to avoid bugs in certain edge cases (e.g. two timeouts going off at the same time).
asyncio/taskgroups.py is an adaptation of taskgroup.py from EdgeDb, with the following key changes:
- Allow creating new tasks as long as the last task hasn't finished
- Raise [Base]ExceptionGroup (directly) rather than TaskGroupError deriving from MultiError
- Instead of monkey-patching the parent task's cancel() method,
add a new public API to Task
The Task class has a new internal flag, `_cancel_requested`, which is set when `.cancel()` is called successfully. The `.cancelling()` method returns the value of this flag. Further `.cancel()` calls while this flag is set return False. To reset this flag, call `.uncancel()`.
Thus, a Task that catches and ignores `CancelledError` should call `.uncancel()` if it wants to be cancellable again; until it does so, it is deemed to be busy with uninterruptible cleanup.
This new Task API helps solve the problem where TaskGroup needs to distinguish between whether the parent task being cancelled "from the outside" vs. "from inside".
Co-authored-by: Yury Selivanov <yury@edgedb.com>
Co-authored-by: Andrew Svetlov <andrew.svetlov@gmail.com>
The getpath.py file is frozen at build time and executed as code over a namespace. It is never imported, nor is it meant to be importable or reusable. However, it should be easier to read, modify, and patch than the previous code.
This commit attempts to preserve every previously tested quirk, but these may be changed in the future to better align platforms.
They support now splitting escape sequences between input chunks.
Add the third parameter "final" in codecs.raw_unicode_escape_decode().
It is True by default to match the former behavior.
They support now splitting escape sequences between input chunks.
Add the third parameter "final" in codecs.unicode_escape_decode().
It is True by default to match the former behavior.
Add a private C API for deadlines: add _PyDeadline_Init() and
_PyDeadline_Get() functions.
* Add _PyTime_Add() and _PyTime_Mul() functions which compute t1+t2
and t1*t2 and clamp the result on overflow.
* _PyTime_MulDiv() now uses _PyTime_Add() and _PyTime_Mul().
* Constructors of subclasses of some buitin classes (e.g. tuple, list,
frozenset) no longer accept arbitrary keyword arguments.
* Subclass of set can now define a __new__() method with additional
keyword parameters without overriding also __init__().
The binhex module, deprecated in Python 3.9, is now removed. The
following binascii functions, deprecated in Python 3.9, are now also
removed:
* a2b_hqx(), b2a_hqx();
* rlecode_hqx(), rledecode_hqx().
The binascii.crc_hqx() function remains available.
* Add termios.tcgetwinsize(), termios.tcsetwinsize(). Update docs.
* Add TIOCGSIZE support to termios.tcgetwinsize()
* Add TIOCSSIZE support to termios.tcsetwinsize()
Authored-by: Soumendra Ganguly <soumendraganguly@gmail.com>
* termios.tcgetwinsize() and termios.tcsetwinsize() should return/accept two-item tuples instead of lists.
* Refactor tcsetwinsize to share common code and accept any two item sequence, with overflow checking.
Co-authored-by: Gregory P. Smith <greg@krypto.org> [Google]
binascii.a2b_base64 gains a strict_mode= parameter. When enabled it will raise an
error on input that deviates from the base64 spec in any way. The default remains
False for backward compatibility.
Code reviews and minor tweaks by: Gregory P. Smith <greg@krypto.org> [Google]
The internal `_ssl._SSLSocket` object now provides methods to retrieve
the peer cert chain and verified cert chain as a list of Certificate
objects. Certificate objects have methods to convert the cert to a dict,
PEM, or DER (ASN.1).
These are private APIs for now. There is a slim chance to stabilize the
approach and provide a public API for 3.10. Otherwise I'll provide a
stable API in 3.11.
Signed-off-by: Christian Heimes <christian@python.org>
asyncio.get_event_loop() emits now a deprecation warning when it creates a new event loop.
In future releases it will became an alias of asyncio.get_running_loop().
- Introduce sslmodule_slots
- Introduce sslmodulestate
- Use sslmodulestate
- Get rid of PyState_FindModule
- Move new structs and helpers to header file
- Use macros to access state
- Keep a strong ref to socket type
- Remove HAVE_X509_VERIFY_PARAM_SET1_HOST check
- Update hashopenssl to require OpenSSL 1.1.1
- multissltests only OpenSSL > 1.1.0
- ALPN is always supported
- SNI is always supported
- Remove deprecated NPN code. Python wrappers are no-op.
- ECDH is always supported
- Remove OPENSSL_VERSION_1_1 macro
- Remove locking callbacks
- Drop PY_OPENSSL_1_1_API macro
- Drop HAVE_SSL_CTX_CLEAR_OPTIONS macro
- SSL_CTRL_GET_MAX_PROTO_VERSION is always defined now
- security level is always available now
- get_num_tickets is available with TLS 1.3
- X509_V_ERR MISMATCH is always available now
- Always set SSL_MODE_RELEASE_BUFFERS
- X509_V_FLAG_TRUSTED_FIRST is always available
- get_ciphers is always supported
- SSL_CTX_set_keylog_callback is always available
- Update Modules/Setup with static link example
- Mention PEP in whatsnew
- Drop 1.0.2 and 1.1.0 from GHA tests
bpo-43172: readline now passes its tests when built against libedit.
Existing irreconcilable API differences remain in readline.get_begidx
and readline.get_endidx behavior based on libreadline vs libedit use.
A note about that has been documented.
* Add a new _locale._get_locale_encoding() function to get the
current locale encoding.
* Modify locale.getpreferredencoding() to use it.
* Remove the _bootlocale module.
Use _PyLong_GetZero() and _PyLong_GetOne() in Modules/ directory.
_cursesmodule.c and zoneinfo.c are now built with
Py_BUILD_CORE_MODULE macro defined.
There are a bunch of other fd: int uses in this file, I expect many if not
all of them would be better off using the fildes converter. This particular
one was flagged by Coverity as it presumably flags fpathconf as not accepting
negative fds. I'd expect the other fd's to have been flagged as well
otherwise.
I'm marking this one as skip news as it really is a no-op.
Previously, the result could have been an instance of a subclass of int.
Also revert bpo-26202 and make attributes start, stop and step of the range
object having exact type int.
Add private function _PyNumber_Index() which preserves the old behavior
of PyNumber_Index() for performance to use it in the conversion functions
like PyLong_AsLong().
hashlib.compare_digest uses OpenSSL's CRYPTO_memcmp() function
when OpenSSL is available.
Note: The _operator module is a builtin module. I don't want to add
libcrypto dependency to libpython. Therefore I duplicated the wrapper
function and added a copy to _hashopenssl.c.
The reset_peak function sets the peak memory size to the current size,
representing a resetting of that metric. This allows for recording the
peak of specific sections of code, ignoring other code that may have
had a higher peak (since the most recent `tracemalloc.start()` or
tracemalloc.clear_traces()` call).
When an asyncio.Task is cancelled, the exception traceback now
starts with where the task was first interrupted. Previously,
the traceback only had "depth one."
The internal module ``_hashlib`` wraps and exposes OpenSSL's HMAC API. The
new code will be used in Python 3.10 after the internal implementation
details of the pure Python HMAC module are no longer part of the public API.
The code is based on a patch by Petr Viktorin for RHEL and Python 3.6.
Co-Authored-By: Petr Viktorin <encukou@gmail.com>
{date, datetime}.isocalendar() now return a private custom named tuple object
IsoCalendarDate rather than a simple tuple.
In order to leave IsocalendarDate as a private class and to improve what
backwards compatibility is offered for pickling the result of a
datetime.isocalendar() call, add a __reduce__ method to the named tuples that
reduces them to plain tuples. (This is the part of this PR most likely to cause
problems — if it causes major issues, switching to a strucseq or equivalent
would be prudent).
The pure python implementation of IsoCalendarDate uses positional-only
arguments, since it is private and only constructed by position anyway; the
equivalent change in the argument clinic on the C side would require us to move
the forward declaration of the type above the clinic import for whatever
reason, so it seems preferable to hold off on that for now.
bpo-24416: https://bugs.python.org/issue24416
Original PR by Dong-hee Na with only minor alterations by Paul Ganssle.
Co-authored-by: Dong-hee Na <donghee.na92@gmail.com>
OpenSSL 3.0.0-alpha2 was released today. The FIPS_mode() function has
been deprecated and removed. It no longer makes sense with the new
provider and context system in OpenSSL 3.0.0.
EVP_default_properties_is_fips_enabled() is good enough for our needs in
unit tests. It's an internal API, too.
Signed-off-by: Christian Heimes <christian@python.org>
Pass PEP 573 defining_class to os.DirEntry methods. The module state
is now retrieve from defining_class rather than Py_TYPE(self), to
support subclasses (even if DirEntry doesn't support subclasses yet).
* Pass the module rather than defining_class to DirEntry_fetch_stat().
* Only get the module state once in _posix_clear(),
_posix_traverse() and _posixmodule_exec().
Convert posixmodule.c ("posix" or "nt" module) to the multiphase
initialization (PEP 489).
* Create the module using PyModuleDef_Init().
* Create ScandirIteratorType and DirEntryType with the new
PyType_FromModuleAndSpec() (PEP 573)
* Get the module state from ScandirIteratorType and DirEntryType with
the new PyType_GetModule() (PEP 573)
* Pass module to functions which access the module state.
* convert_sched_param() gets a new module parameter. It is now called
directly since Argument Clinic doesn't support passing the module
to an argument converter callback.
* Remove _posixstate_global macro.
Module C state is now accessible from C-defined heap type methods (PEP 573).
Patch by Marcel Plch and Petr Viktorin.
Co-authored-by: Marcel Plch <mplch@redhat.com>
Co-authored-by: Victor Stinner <vstinner@python.org>
Remove _random.Random.randbytes(): the C implementation of
randbytes(). Implement the method in Python to ease subclassing:
randbytes() now directly reuses getrandbits().
test.pythoninfo logs OpenSSL FIPS_mode() and Linux
/proc/sys/crypto/fips_enabled in a new "fips" section.
Co-Authored-By: Petr Viktorin <encukou@gmail.com>
Fix the Windows implementation of os.waitpid() for exit code
larger than "INT_MAX >> 8". The exit status is now interpreted as an
unsigned number.
os.waitstatus_to_exitcode() now accepts wait status larger than
INT_MAX.
Add random.randbytes() function and random.Random.randbytes()
method to generate random bytes.
Modify secrets.token_bytes() to use SystemRandom.randbytes()
rather than calling directly os.urandom().
Rename also genrand_int32() to genrand_uint32(), since it returns an
unsigned 32-bit integer, not a signed integer.
The _random module is now built with Py_BUILD_CORE_MODULE defined.
Add os.waitstatus_to_exitcode() function to convert a wait status to an
exitcode.
Suggest waitstatus_to_exitcode() usage in the documentation when
appropriate.
Use waitstatus_to_exitcode() in:
* multiprocessing, os, subprocess and _bootsubprocess modules;
* test.support.wait_process();
* setup.py: run_command();
* and many tests.
* bpo-39648: Expand math.gcd() and math.lcm() to handle multiple arguments.
* Simplify fast path.
* Difine lcm() without arguments returning 1.
* Apply suggestions from code review
Co-Authored-By: Mark Dickinson <dickinsm@gmail.com>
Co-authored-by: Mark Dickinson <dickinsm@gmail.com>
The os.putenv() and os.unsetenv() functions are now always available.
On non-Windows platforms, Python now requires setenv() and unsetenv()
functions to build.
Remove putenv_dict from posixmodule.c: it's not longer needed.
Some portions of the pickle documentation hadn't been updated for the pickle protocol changes in Python 3.8 (new protocol 5, default protocol 4). This PR fixes those docs.
https://bugs.python.org/issue39426
If setenv() C function is available, os.putenv() is now implemented
with setenv() instead of putenv(), so Python doesn't have to handle
the environment variable memory.
Deprecate binhex4 and hexbin4 standards. Deprecate the binhex module
and the following binascii functions:
* b2a_hqx(), a2b_hqx()
* rlecode_hqx(), rledecode_hqx()
* crc_hqx()
This exposes a Linux-specific syscall for sending a signal to a process
identified by a file descriptor rather than a pid.
For simplicity, we don't support the siginfo_t parameter to the syscall. This
parameter allows implementing a pidfd version of rt_sigqueueinfo(2), which
Python also doesn't support.
The PyFPE_START_PROTECT() and PyFPE_END_PROTECT() macros are empty:
they have been doing nothing for the last year (since commit
735ae8d139), so stop using them.
After #9665, this moves the remaining types in posixmodule to be heap-allocated to make it compatible with PEP384 as well as modifying all the type accessors to fully make the type opaque.
The original PR that got messed up a rebase: https://github.com/python/cpython/pull/10854. All the issues in that commit have now been addressed since https://github.com/python/cpython/pull/11661 got committed.
This change also removes any state from the data segment and onto the module state itself.
https://bugs.python.org/issue35381
Automerge-Triggered-By: @encukou
* Convert select module to PEP-384
Summary: Do the necessary versions to be Pyro-compatible, including migrating `PyType_Ready` to `PyType_FromSpec` and moving static data into a new `_selectstate` struct.
* 📜🤖 Added by blurb_it.
* Fixup Mac OS/X build
In ArgumentClinic, value "NULL" should now be used only for unrepresentable default values
(like in the optional third parameter of getattr). "None" should be used if None is accepted
as argument and passing None has the same effect as not passing the argument at all.
The usedforsecurity keyword only argument added to the hash constructors is useful for FIPS builds and similar restrictive environment with non-technical requirements that legacy algorithms be forbidden by their implementations without being explicitly annotated as not being used for any security related purposes. Linux distros with FIPS support benefit from this being standard rather than making up their own way(s) to do it.
Contributed and Signed-off-by: Christian Heimes christian@python.org
bpo-37834: Normalise handling of reparse points on Windows
* ntpath.realpath() and nt.stat() will traverse all supported reparse points (previously was mixed)
* nt.lstat() will let the OS traverse reparse points that are not name surrogates (previously would not traverse any reparse point)
* nt.[l]stat() will only set S_IFLNK for symlinks (previous behaviour)
* nt.readlink() will read destinations for symlinks and junction points only
bpo-1311: os.path.exists('nul') now returns True on Windows
* nt.stat('nul').st_mode is now S_IFCHR (previously was an error)
In a subinterpreter, spawning a daemon thread now raises an
exception. Daemon threads were never supported in subinterpreters.
Previously, the subinterpreter finalization crashed with a Pyton
fatal error if a daemon thread was still running.
* Add _thread._is_main_interpreter()
* threading.Thread.start() now raises RuntimeError if the thread is a
daemon thread and the method is called from a subinterpreter.
* The _thread module now uses Argument Clinic for the new function.
* Use textwrap.dedent() in test_threading.SubinterpThreadingTests
* bpo-26836: Add os.memfd_create()
* Use the glibc wrapper for memfd_create()
Co-Authored-By: Christian Heimes <christian@python.org>
* Fix deletions caused by autoreconf.
* Use MFD_CLOEXEC as the default value for *flags*.
* Add memset_s to configure.ac.
* Revert memset_s changes.
* Apply the requested changes.
* Tweak the docs.
* bpo-22385: Support output separators in hex methods.
Also in binascii.hexlify aka b2a_hex.
The underlying implementation behind all hex generation in CPython uses the
same pystrhex.c implementation. This adds support to bytes, bytearray,
and memoryview objects.
The binascii module functions exist rather than being slated for deprecation
because they return bytes rather than requiring an intermediate step through a
str object.
This change was inspired by MicroPython which supports sep in its binascii
implementation (and does not yet support the .hex methods).
https://bugs.python.org/issue22385
* Add math.isqrt function computing the integer square root.
* Code cleanup: remove redundant comments, rename some variables.
* Tighten up code a bit more; use Py_XDECREF to simplify error handling.
* Update Modules/mathmodule.c
Co-Authored-By: Serhiy Storchaka <storchaka@gmail.com>
* Update Modules/mathmodule.c
Use real argument clinic type instead of an alias
Co-Authored-By: Serhiy Storchaka <storchaka@gmail.com>
* Add proof sketch
* Updates from review.
* Correct and expand documentation.
* Fix bad reference handling on error; make some variables block-local; other tidying.
* Style and consistency fixes.
* Add missing error check; don't try to DECREF a NULL a
* Simplify some error returns.
* Another two test cases:
- clarify that floats are rejected even if they happen to be
squares of small integers
- TypeError beats ValueError for a negative float
* Documentation and markup improvements; thanks Serhiy for the suggestions!
* Cleaner Misc/NEWS entry wording.
* Clean up (with one fix) to the algorithm explanation and proof.
* bpo-36673: Implement comment/PI parsing support for the TreeBuilder in ElementTree.
* bpo-36673: Rewrite the comment/PI factory handling for the TreeBuilder in "_elementtree" to make it use the same factories as the ElementTree module, and to make it explicit when the comments/PIs are inserted into the tree and when they are not (which is the default).
* Added tests for shared_memory submodule.
* Added tests for ShareableList.
* Fix bug in allocationn size during creation of empty ShareableList illuminated by existing test run on Linux.
* Initial set of docs for shared_memory module.
* Added docs for ShareableList, added doctree entry for shared_memory submodule, name refactoring for greater clarity.
* Added examples to SharedMemoryManager docs, for ease of documentation switched away from exclusively registered functions to some explicit methods on SharedMemoryManager.
* Wording tweaks to docs.
* Fix test failures on Windows.
* Added tests around SharedMemoryManager.
* Documentation tweaks.
* Fix inappropriate test on Windows.
* Further documentation tweaks.
* Fix bare exception.
* Removed __copyright__.
* Fixed typo in doc, removed comment.
* Updated SharedMemoryManager preliminary tests to reflect change of not supporting all registered functions on SyncManager.
* Added Sphinx doctest run controls.
* CloseHandle should be in a finally block in case MapViewOfFile fails.
* Missed opportunity to use with statement.
* Switch to self.addCleanup to spare long try/finally blocks and save one indentation, change to use decorator to skip test instead.
* Simplify the posixshmem extension module.
Provide shm_open() and shm_unlink() functions. Move other
functionality into the shared_memory.py module.
* Added to doc around size parameter of SharedMemory.
* Changed PosixSharedMemory.size to use os.fstat.
* Change SharedMemory.buf to a read-only property as well as NamedSharedMemory.size.
* Marked as provisional per PEP411 in docstring.
* Changed SharedMemoryTracker to be private.
* Removed registered Proxy Objects from SharedMemoryManager.
* Removed shareable_wrap().
* Removed shareable_wrap() and dangling references to it.
* For consistency added __reduce__ to key classes.
* Fix for potential race condition on Windows for O_CREX.
* Remove unused imports.
* Update access to kernel32 on Windows per feedback from eryksun.
* Moved kernel32 calls to _winapi.
* Removed ShareableList.copy as redundant.
* Changes to _winapi use from eryksun feedback.
* Adopt simpler SharedMemory API, collapsing PosixSharedMemory and WindowsNamedSharedMemory into one.
* Fix missing docstring on class, add test for ignoring size when attaching.
* Moved SharedMemoryManager to managers module, tweak to fragile test.
* Tweak to exception in OpenFileMapping suggested by eryksun.
* Mark a few dangling bits as private as suggested by Giampaolo.
Use _PyArg_CheckPositional() and inlined code instead of
PyArg_UnpackTuple() and _PyArg_UnpackStack() if all parameters
are positional and use the "object" converter.
As in title, expose C `raise` function as `raise_function` in `signal` module. Also drop existing `raise_signal` in `_testcapi` module and replace all usages with new function.
https://bugs.python.org/issue35568
* bpo-32492: 2.5x speed up in namedtuple attribute access using C fast path
* Add News entry
* fixup! bpo-32492: 2.5x speed up in namedtuple attribute access using C fast path
* Check for tuple in the __get__ of the new descriptor and don't cache the descriptor itself
* Don't inherit from property. Implement GC methods to handle __doc__
* Add a test for the docstring substitution in descriptors
* Update NEWS entry to reflect time against 3.7 branch
* Simplify implementation with argument clinic, better error messages, only __new__
* Use positional-only parameters for the __new__
* Use PyTuple_GET_SIZE and PyTuple_GET_ITEM to tighter the implementation of tuplegetterdescr_get
* Implement __set__ to make tuplegetter a data descriptor
* Use Py_INCREF now that we inline PyTuple_GetItem
* Apply the valid_index() function, saving one test
* Move Py_None test out of the critical path.
Fix invalid function cast warnings with gcc 8
for method conventions different from METH_NOARGS, METH_O and
METH_VARARGS in Argument Clinic generated code.
Some methods in the os module can accept path-like objects. This is documented in the general documentation but not in the function docstrings. To keep both in sync, the docstrings need to be updated to reflect that path-like objects are also accepted.
Add SSLContext.post_handshake_auth and
SSLSocket.verify_client_post_handshake for TLS 1.3 post-handshake
authentication.
Signed-off-by: Christian Heimes <christian@python.org>q
https://bugs.python.org/issue34670
Such functions as os.path.exists(), os.path.lexists(), os.path.isdir(),
os.path.isfile(), os.path.islink(), and os.path.ismount() now return False
instead of raising ValueError or its subclasses UnicodeEncodeError
and UnicodeDecodeError for paths that contain characters or bytes
unrepresentative at the OS level.
* help(hashlib) didn't work because of incorrect module name in blake2b and
blake2s classes.
* Constructors blake2*(), sha3_*(), shake_*() and keccak_*() incorrectly
accepted keyword argument "string" for binary data, but documented as
accepting the "data" keyword argument. Now this parameter is positional-only.
* Keyword-only parameters in blake2b() and blake2s() were not documented as
keyword-only.
* Default value for some parameters of blake2b() and blake2s() was None,
which is not acceptable value.
* The length argument for shake_*.digest() was wrapped out to 32 bits.
* The argument for shake_128.digest() and shake_128.hexdigest() was not
positional-only as intended.
* TypeError messages for incorrect arguments in all constructors sha3_*(),
shake_*() and keccak_*() incorrectly referred to sha3_224.
Also made the following enhancements:
* More accurately specified input and result types for strings, bytes and
bytes-like objects.
* Unified positional parameter names for update() and constructors.
* Improved formatting.
bpo-33671
* use memoryview() with size == file size on Windows, see https://github.com/python/cpython/pull/7160#discussion_r195405230
* release intermediate (sliced) memoryview immediately
* replace "OSX" occurrences with "macOS"
* add some unittests for copyfileobj()
* have shutil.copyfileobj use sendfile() if possible
* refactoring: use ctx manager
* add test with non-regular file obj
* emulate case where file size can't be determined
* reference _copyfileobj_sendfile directly
* add test for offset() at certain position
* add test for empty file
* add test for non regular file dst
* small refactoring
* leave copyfileobj() alone in order to not introduce any incompatibility
* minor refactoring
* remove old test
* update docstring
* update docstring; rename exception class
* detect platforms which only support file to socket zero copy
* don't run test on platforms where file-to-file zero copy is not supported
* use tempfiles
* reset verbosity
* add test for smaller chunks
* add big file size test
* add comment
* update doc
* update whatsnew doc
* update doc
* catch Exception
* remove unused import
* add test case for error on second sendfile() call
* turn docstring into comment
* add one more test
* update comment
* add Misc/NEWS entry
* get rid of COPY_BUFSIZE; it belongs to another PR
* update doc
* expose posix._fcopyfile() for OSX
* merge from linux branch
* merge from linux branch
* expose fcopyfile
* arg clinic for the win implementation
* convert path type to path_t
* expose CopyFileW
* fix windows tests
* release GIL
* minor refactoring
* update doc
* update comment
* update docstrings
* rename functions
* rename test classes
* update doc
* update doc
* update docstrings and comments
* avoid do import nt|posix modules if unnecessary
* set nt|posix modules to None if not available
* micro speedup
* update description
* add doc note
* use better wording in doc
* rename function using 'fastcopy' prefix instead of 'zerocopy'
* use :ref: in rst doc
* change wording in doc
* add test to make sure sendfile() doesn't get called aymore in case it doesn't support file to file copies
* move CopyFileW in _winapi and actually expose CopyFileExW instead
* fix line endings
* add tests for mode bits
* add docstring
* remove test file mode class; let's keep it for later when Istart addressing OSX fcopyfile() specific copies
* update doc to reflect new changes
* update doc
* adjust tests on win
* fix argument clinic error
* update doc
* OSX: expose copyfile(3) instead of fcopyfile(3); also expose flags arg to python
* osx / copyfile: use path_t instead of char
* do not set dst name in the OSError exception in order to remain consistent with platforms which cannot do that (e.g. linux)
* add same file test
* add test for same file
* have osx copyfile() pre-emptively check if src and dst are the same, otherwise it will return immedialtey and src file content gets deleted
* turn PermissionError into appropriate SameFileError
* expose ERROR_SHARING_VIOLATION in order to raise more appropriate SameFileError
* honour follow_symlinks arg when using CopyFileEx
* update Misc/NEWS
* expose CreateDirectoryEx mock
* change C type
* CreateDirectoryExW actual implementation
* provide specific makedirs() implementation for win
* fix typo
* skeleton for SetNamedSecurityInfo
* get security info for src path
* finally set security attrs
* add unit tests
* mimick os.makedirs() behavior and raise if dst dir exists
* set 2 paths for OSError object
* set 2 paths for OSError object
* expand windows test
* in case of exception on os.sendfile() set filename and filename2 exception attributes
* set 2 filenames (src, dst) for OSError in case copyfile() fails on OSX
* update doc
* do not use CreateDirectoryEx() in copytree() if source dir is a symlink (breaks test_copytree_symlink_dir); instead just create a plain dir and remain consistent with POSIX implementation
* use bytearray() and readinto()
* use memoryview() with bytearray()
* refactoring + introduce a new _fastcopy_binfileobj() fun
* remove CopyFileEx and other C wrappers
* remove code related to CopyFileEx
* Recognize binary files in copyfileobj()
...and use fastest _fastcopy_binfileobj() when possible
* set 1MB copy bufsize on win; also add a global _COPY_BUFSIZE variable
* use ctx manager for memoryview()
* update doc
* remove outdated doc
* remove last CopyFileEx remnants
* OSX - use fcopyfile(3) instead of copyfile(3)
...as an extra safety measure: in case src/dst are "exotic" files (non
regular or living on a network fs etc.) we better fail on open() instead
of copyfile(3) as we're not quite sure what's gonna happen in that
case.
* update doc
* Expose the sigset_t converter via private API _Py_Sigset_Converter().
* Use Argument Clinic for parsing sigset_t in signalmodule.c.
* Raise ValueError instead OverflowError for integers out of
the C long range.
Based on patch by Pablo Galindo Salgado.
This makes performance better and produces shorter pickles. This change is backwards compatible up to the oldest currently supported version of Python (3.4).
The ssl module now detects missing NPN support in LibreSSL.
Co-Authored-By: Bernard Spil <brnrd@FreeBSD.org>
Signed-off-by: Christian Heimes <christian@python.org>
AN Long
Inada Naoki
Soumendra Ganguly
Joshua Herman
Victor Stinner
Serhiy Storchaka
Shantanu
Raymond Hettinger
Ma Lin
Andrew Svetlov
Gregory P. Smith
Alex Grönholm
Kumar Aditya
Tin Tvrtković
Dong-hee Na
Guido van Rossum
DongGeon Lee
Jacob Walls
Petr Viktorin
Christian Heimes
Zane Bitter
Steve Dower
Mohamad Mansour
Henry-Joseph Audéoud
Erlend Egeberg Aasland
Ruben Vorderman
Irit Katriel
Pablo Galindo Salgado
Yurii Karabas
Idan Moral
Rupert Tombs
hrchu
Zackery Spytz
Mohamed Koubaa
Hai Shi
Hans Petter Jansson
Rémi Lapeyre
Anthony Sottile
Dong-hee Na
YoSTEALTH
Jakub Stasiak
Huon Wilson
Chris Jerdonek
Shantanu
Paul Ganssle
Batuhan Taşkaya
ananthan-123
Mark Dickinson
Benjamin Peterson
Eddie Elizondo
Dino Viehland
Rémi Lapeyre
Greg Price
Min ho Kim
Victor Stinner
Yash Aggarwal
Antoine Pitrou
pxinwr
Mark Dickinson
Stefan Behnel
Steve Dower
Davin Potts
Joannah Nanjekye
Ammar Askar
Vladimir Matveev
Tal Einat
Max Bélanger
BNMetrics
Srinivas Thatiparthy (శ్రీనివాస్ తాటిపర్తి)
William Orr
Tim Hoffmann
Lisa Roach
William Grzybowski
Alexander Buchkovsky
Giampaolo Rodola
Antoine Pitrou
Łukasz Langa
Antoine Pietri
Xiang Zhang