and left shifts. (Thanks to Kalle Svensson for SF patch 849227.)
This addresses most of the remaining semantic changes promised by
PEP 237, except for repr() of a long, which still shows the trailing
'L'. The PEP appears to promise warnings for operations that
changed semantics compared to Python 2.3, but this is not
implemented; we've suffered through enough warnings related to
hex/oct literals and I think it's best to be silent now.
by the function object or by the method object, the function
object's attribute usually wins. Christian Tismer pointed out that
that this is really a mistake, because this only happens for special
methods (like __reduce__) where the method object's version is
really more appropriate than the function's attribute. So from now
on, all method attributes will have precedence over function
attributes with the same name.
Also SF patch 843455.
This is a critical bugfix.
I'll backport to 2.3 maint, but not beyond that. The bugs this fixes
have been there since weakrefs were introduced.
* Install the unittests, docs, newsitem, include file, and makefile update.
* Exercise the new functions whereever sets.py was being used.
Includes the docs for libfuncs.tex. Separate docs for the types are
forthcoming.
subtype_dealloc(): This left the dying object exposed to gc, so that
if cyclic gc triggered during the weakref callback, gc tried to delete
the dying object a second time. That's a disaster. subtype_dealloc()
had a (I hope!) unique problem here, as every normal dealloc routine
untracks the object (from gc) before fiddling with weakrefs etc. But
subtype_dealloc has obscure technical reasons for re-registering the
dying object with gc (already explained in a large comment block at
the bottom of the function).
The fix amounts to simply refraining from reregistering the dying object
with gc until after the weakref callback (if any) has been called.
This is a critical bug (hard to predict, and causes seemingly random
memory corruption when it occurs). I'll backport it to 2.3 later.
It works like the pure python verion except:
* it stops storing data after of the iterators gets deallocated
* the data queue is implemented with two stacks instead of one dictionary.
key provides C support for the decorate-sort-undecorate pattern.
reverse provide a stable sort of the list with the comparisions reversed.
* Amended the docs to guarantee sort stability.
* Added C coded getrandbits(k) method that runs in linear time.
* Call the new method from randrange() for ranges >= 2**53.
* Adds a warning for generators not defining getrandbits() whenever they
have a call to randrange() with too large of a population.
If a length-1 Unicode string was in the freelist and it was
uninitialized or pointed to a very large (magnitude) negative number,
the check
unicode_latin1[unicode->str[0]] == unicode
could cause a segmentation violation, e.g. unicode->str[0] is 0xcbcbcbcb.
Fix this in two ways:
1. Change guard befor unicode_latin1[] to test against 256U. If I
understand correctly, the unsigned long used to store UCS4 on my
box was getting converted to a signed long to compare with the
signed constant 256.
2. Change _PyUnicode_New() to make sure the first element of str is
always initialized to zero. There are several places in the code
where the caller can exit with an error before initializing any
of str, which would leave junk in str[0].
Also, silence a compiler warning on pointer vs. int arithmetic.
Bug fix candidate.
Add support for the iterator and mapping protocols.
For Py2.3, this was done for shelve, dumbdbm and other mapping objects, but
not for bsddb and dbhash which were inadvertently missed.
file_truncate(): C doesn't define what fflush(fp) does if fp is open
for update, and the preceding I/O operation on fp was input. On Windows,
fflush() actually changes the current file position then. Because
Windows doesn't support ftruncate() directly, this not only caused
Python's file.truncate() to change the file position (contra our docs),
it also caused the file not to change size.
Repaired by getting the initial file position at the start, restoring
it at the end, and tossing all the complicated micro-efficiency checks
trying to avoid "provably unnecessary" seeks. file.truncate() can't
be a frequent operation, and seeking to the current file position has
got to be cheap anyway.
Bugfix candidate.
* Relaxed the argument restrictions for non-operator methods. They now
allow any iterable instead of requiring a set. This makes the module
a little easier to use and paves the way for an efficient C
implementation which can take better advantage of iterable arguments
while screening out immutables.
* Deprecated Set.update() because it now duplicates Set.union_update()
* Adapted the tests and docs to include the above changes.
* Added more test coverage including testing identities and checking
to make sure non-restartable generators work as arguments.
Will backport to Py2.3.1 so that the interface remains consistent
across versions. The deprecation of update() will be changed to
a FutureWarning.
number. This accounts for the 2 refcount leaks per test_complex run
Michael Hudson discovered (I figured only I would have the stomach to
look for leaks in floating-point code <wink>).
The default seed is time.time().
Multiplied by 256 before truncating so that fractional seconds are used.
This way, two successive calls to random.seed() are much more likely
to produce different sequences.
The fix is confined to the Windows installer.
Not a bugfix candidate: the need for the new -n switch added here was
introduced by moving to the idlefork IDLE (so this change isn't needed
or helpful before 2.3).
arbitrary bytes before the actual zip compatible archive. Zipfiles
containing comments at the end of the file are still not supported.
Add a testcase to test_zipimport, and update NEWS.
This closes sf #775637 and sf #669036.
are satisfied in a case-insensitive manner, the attempt to import (the
non-existent) fcntl gets satisfied by FCNTL.py instead, and the tempfile
module defines a Unix-specific _set_cloexec() function in that case. As
a result, temp files can't be created then (blows up with an AttributeError
trying to reference fcntl.fcntl). This just popped up in the spambayes
project, where there is no apparent workaround (which is why I'm pushing
this in now).
New Plan (releases to be made off the head, ongoing random 2.4 stuff
to be done on a short-lived branch, provided anyone is motivated enough
to create one).
skip over functions with private names (as indicated by the underscore
naming convention). The old default created too much of a risk that
user tests were being skipped inadvertently. Note, this change could
break code in the unlikely case that someone had intentionally put
failing tests in the docstrings of private functions. The breakage
is easily fixable by specifying the old behavior when calling testmod()
or Tester(). The more likely case is that the silent failure was
unintended and that the user needed to be informed so the test could be
fixed.
Related to SF patch 723231 (which pointed out the problem, but didn't
fix it, just shut up the warning msg -- which was pointing out a dead-
serious bug!).
Bugfix candidate.
behavior, creating many threads very quickly. A long debugging session
revealed that the Windows implementation of PyThread_start_new_thread()
was choked with "laziness" errors:
1. It checked MS _beginthread() for a failure return, but when that
happened it returned heap trash as the function result, instead of
an id of -1 (the proper error-return value).
2. It didn't consider that the Win32 CreateSemaphore() can fail.
3. When creating a great many threads very quickly, it's quite possible
that any particular bootstrap call can take virtually any amount of
time to return. But the code waited for a maximum of 5 seconds, and
didn't check to see whether the semaphore it was waiting for got
signaled. If it in fact timed out, the function could again return
heap trash as the function result. This is actually what confused
the test program, as the heap trash usually turned out to be 0, and
then multiple threads all got id 0 simultaneously, confusing the
hell out of threading.py's _active dict (mapping id to thread
object). A variety of baffling behaviors followed from that.
WRT #1 and #2, error returns are checked now, and "thread.error: can't
start new thread" gets raised now if a new thread (or new semaphore)
can't be created. WRT #3, we now wait for the semaphore without a
timeout.
Also removed useless local vrbls, folded long lines, and changed callobj
to a stack auto (it was going thru malloc/free instead, for no discernible
reason).
Bugfix candidate.
Raymond Hettinger
Guido van Rossum
Thomas Heller
Martin v. Löwis
Tim Peters
Neil Schemenauer
Anthony Baxter
Skip Montanaro
Armin Rigo
Alex Martelli
Fred Drake
Brett Cannon
Gustavo Niemeyer
Marc-André Lemburg
Jeremy Hylton
Barry Warsaw
Andrew M. Kuchling
Walter Dörwald
Jack Jansen
Neal Norwitz