With recent enough compilers we can build binaries with
LTO/PGO on macOS. This patch enables this when building on
macOS 10.15 or later (Xcode 11 or later).
This change is cosmetic only, the "gcc" command in Apple's compiler tools is an alias for "clang" (and using non-system tooling for building the installer is not supported by this script).
Automerge-Triggered-By: GH:ned-deily
This allows reliably forcing macOS universal2 framework builds
to run under Rosetta 2 Intel-64 emulation on Apple Silicon Macs
if needed for testing or when universal2 wheels are not yet
available.
- [x] Build OpenSSL 1.1.1k for macOS
- [x] Build OpenSSL 1.1.1k for Windows
I have also updated multissl tester and various CI configurations to use latest OpenSSL. The versions were all over the place.
Signed-off-by: Christian Heimes <christian@python.org>
Automerge-Triggered-By: GH:tiran
Co-authored-by: Lawrence D’Anna <lawrence_danna@apple.com>
* Add support for macOS 11 and Apple Silicon (aka arm64)
As a side effect of this work use the system copy of libffi on macOS, and remove the vendored copy
* Support building on recent versions of macOS while deploying to older versions
This allows building installers on macOS 11 while still supporting macOS 10.9.
Adds a simple check for whether or not the package is being installed in the GUI or using installer on the command line. This addresses an issue where CLI-based software management tools (such as Munki) unexpectedly open Finder windows into a GUI session during installation runs.
build-installer now looks in its directory of source tarballs
for a suitable html tarball of the same version. If so, it
will unpack and use it rather than rebuilding the html format
documentation set from the source repo. This is intended as
a speedup for test builds of the installer. Files names must
be in the same format as produced by the docs build for download,
for example, `python-3.9.0b1-docs-html.tar.bz2`.
Reason: the link `ftp://invisible-island.net/ncurses//5.9/ncurses-5.9-20120616-patch.sh.bz2` is dead, which prevents `Mac/BuildScript/build-installer.py` from completing. Looks like the host of the FTP server was changed to `ftp.invisible-island.net`, thus this proposal.
Signed-off-by: oleg.hoefling <oleg.hoefling@gmail.com>
This reverts commit 0da5466650.
The commit is causing make failures on a FreeBSD buildbot.
Due to the imminent 3.9.0b1 cutoff, revert this commit for
now pending further investigation.
Add support to the configure script for OBJC and OBJCXX command line options so that the macOS builds can use the clang compiler for the macOS-specific Objective C source files. This allows third-party compilers, like GNU gcc, to be used to build the rest of the project since some of the Objective C system header files are not compilable by GNU gcc.
Co-authored-by: Jeffrey Kintscher <websurfer@surf2c.net>
Co-authored-by: Terry Jan Reedy <tjreedy@udel.edu>
Previously, python.org macOS installers did not alter the Current version
symlink in /Library/Frameworks/Python.framework/Versions when installing
a version of Python 3.x, only when installing 2.x. Now that Python 2 is
retired, it's time to change that. This should make it a bit easier
to embed Python 3 into other macOS applications.
* bpo-22490: Remove "__PYVENV_LAUNCHER__" from the shell environment on macOS
This changeset removes the environment varialbe "__PYVENV_LAUNCHER__"
during interpreter launch as it is only needed to communicate between
the stub executable in framework installs and the actual interpreter.
Leaving the environment variable present may lead to misbehaviour when
launching other scripts.
* Actually commit the changes for issue 22490...
* Correct typo
Co-Authored-By: Nicola Soranzo <nicola.soranzo@gmail.com>
* Run make patchcheck
Co-authored-by: Jason R. Coombs <jaraco@jaraco.com>
Co-authored-by: Nicola Soranzo <nicola.soranzo@gmail.com>
There are plenty of legitimate scripts in the tree that begin with a
`#!`, but also a few that seem to be marked executable by mistake.
Found them with this command -- it gets executable files known to Git,
filters to the ones that don't start with a `#!`, and then unmarks
them as executable:
$ git ls-files --stage \
| perl -lane 'print $F[3] if (!/^100644/)' \
| while read f; do
head -c2 "$f" | grep -qxF '#!' \
|| chmod a-x "$f"; \
done
Looking at the list by hand confirms that we didn't sweep up any
files that should have the executable bit after all. In particular
* The `.psd` files are images from Photoshop.
* The `.bat` files sure look like things that can be run.
But we have lots of other `.bat` files, and they don't have
this bit set, so it must not be needed for them.
Automerge-Triggered-By: @benjaminp
Plistlib currently throws an exception when asked to decode a valid
.plist file that was generated by Apple's NSKeyedArchiver. Specifically,
this is caused by a byte 0x80 (signifying a UID) not being understood.
This fixes the problem by enabling the binary plist reader and writer
to read and write plistlib.UID objects.
This reverts commit 7cf3d8e251.
Due to regressions found with using Tk 8.6.9.1, build the python.org macOS installers with Tcl/Tk 8.6.8 as used in previous releases.
https://bugs.python.org/issue35402
Currently, "pip3 install --upgrade pip" unconditionally installs a
"pip" alias even for Python 3. If a user has an existing Python 3.x
installed from a python.org macOS installer and then subsequently
manually updates to a new version of pip, there may now be a stray
"pip" alias in the Python 3.x framework bin directory which can cause
confusion if the user has both a Python 2.7 and 3.x installed;
if the Python 3.x fw bin directory appears early on $PATH, "pip"
might invoke the pip3 for the Python 3.x rather than the pip for
Python 2.7. To try to mitigate this, the macOS installer script
for the ensurepip option will unconditionally remove "pip" from
the 3.x framework bin directory being updated / installed. (The
ambiguity can be avoided by using "pythonx.y -m pip".)
Build and link with private copy of Tcl/Tk 8.6 for the macOS 10.6+
installer. The 10.9+ installer variant already does this. This means that
the Python 3.7 provided by the python.org macOS installers no longer need or
use any external versions of Tcl/Tk, either system-provided or user-
installed, such as ActiveTcl.
Forcing the macOS IDLE.app gui process to launch in 32-mode was
a necessary hack for old versions of Tk (Aqua Carbon as in Tk 8.4
and early versions of 8.5); it is not needed for current versions
of Tk. Since 32-bit launching will no longer be supported on
future releases of macOS, allow IDLE.app to launch in 64-bit mode.
This issue covers various changes for the macOS installers provided via python.org for 3.7.0.
- Provide a provisional new installer variant for macOS 10.9 and later systems with 64-bit (x86_64) architecture only. Apple has made it known that future versions of macOS will only fully support 64-bit executables and some other third-party software suppliers have chosen 10.9 as their oldest supported system.
- Support **Tcl/Tk 8.6** with the 10.9 installer variant.
- Upgrade **OpenSSL** to 1.1.0g and **SQLite** to 3.22.0.
- The compiler name used for the interpreter build and for modules built with **Distutils / pip** is now _gcc_ rather than _gcc-4.2_. And extension module builds will no longer try to force use of an old SDK if present.
* Fix multiple typos in code comments
* Add spacing in comments (test_logging.py, test_math.py)
* Fix spaces at the beginning of comments in test_logging.py
Don't rebuild generated files based on file modification time
anymore, the action is now explicit. Replace "make touch"
with "make regen-all".
Changes:
* Remove "make touch", Tools/hg/hgtouch.py and .hgtouch
* Add a new "make regen-all" command to rebuild all generated files
* Add subcommands to only generate specific files:
- regen-ast: Include/Python-ast.h and Python/Python-ast.c
- regen-grammar: Include/graminit.h and Python/graminit.c
- regen-importlib: Python/importlib_external.h and Python/importlib.h
- regen-opcode: Include/opcode.h
- regen-opcode-targets: Python/opcode_targets.h
- regen-typeslots: Objects/typeslots.inc
* Rename PYTHON_FOR_GEN to PYTHON_FOR_REGEN
* pgen is now only built by by "make regen-grammar"
* Add $(srcdir)/ prefix to paths to source files to handle correctly
compilation outside the source directory
Note: $(PYTHON_FOR_REGEN) is no more used nor needed by "make"
default target building Python.
Mariusz Felisiak
Ned Deily
Clemens Brunner
Ronald Oussoren
Erlend Egeberg Aasland
Christian Heimes
Ikko Ashimine
Dong-hee Na
Rick Heil
Oleg Höfling
@RandyMcMillan
Benjamin Peterson
Julien Palard
Greg Price
animalize
cclauss
Jon Janzen
Thomas Jones
Brett Cannon
Mike
Mariatta
Serhiy Storchaka
Lisa Hewus Fresh
Victor Stinner