These functions are considered not safe because they suppress all internal errors
and can return wrong result. PyDict_GetItemString and _PyDict_GetItemId can
also silence current exception in rare cases.
Remove no longer used _PyDict_GetItemId.
Add _PyDict_ContainsId and rename _PyDict_Contains into
_PyDict_Contains_KnownHash.
On Windows, #include "pyerrors.h" no longer defines "snprintf" and
"vsnprintf" macros.
PyOS_snprintf() and PyOS_vsnprintf() should be used to get portable
behavior.
Replace snprintf() calls with PyOS_snprintf() and replace vsnprintf()
calls with PyOS_vsnprintf().
On macOS, socket.getaddrinfo() no longer uses an internal lock to
prevent race conditions when calling getaddrinfo(). getaddrinfo is
thread-safe is macOS 10.5, whereas Python 3.9 requires macOS 10.6 or
newer.
The lock was also used on FreeBSD older than 5.3, OpenBSD older than
201311 and NetBSD older than 4.
set_herror builds a string by calling hstrerror but downcasts its return value to char *. It should be const char *.
Automerge-Triggered-By: @benjaminp
Rewrite getsockaddrarg() helper function of socketmodule.c (_socket
module) to prevent a false alarm when compiling codde using GCC with
_FORTIFY_SOURCE=2. Pass a pointer of the sock_addr_t union, rather
than passing a pointer to a sockaddr structure.
Add "struct sockaddr_tipc tipc;" to the sock_addr_t union.
There are plenty of legitimate scripts in the tree that begin with a
`#!`, but also a few that seem to be marked executable by mistake.
Found them with this command -- it gets executable files known to Git,
filters to the ones that don't start with a `#!`, and then unmarks
them as executable:
$ git ls-files --stage \
| perl -lane 'print $F[3] if (!/^100644/)' \
| while read f; do
head -c2 "$f" | grep -qxF '#!' \
|| chmod a-x "$f"; \
done
Looking at the list by hand confirms that we didn't sweep up any
files that should have the executable bit after all. In particular
* The `.psd` files are images from Photoshop.
* The `.bat` files sure look like things that can be run.
But we have lots of other `.bat` files, and they don't have
this bit set, so it must not be needed for them.
Automerge-Triggered-By: @benjaminp
FreeBSD implementation of poll(2) restricts the timeout argument to be
either zero, or positive, or equal to INFTIM (-1).
Unless otherwise overridden, socket timeout defaults to -1. This value
is then converted to milliseconds (-1000) and used as argument to the
poll syscall. poll returns EINVAL (22), and the connection fails.
This bug was discovered during the EINTR handling testing, and the
reproduction code can be found in
https://bugs.python.org/issue23618 (see connect_eintr.py,
attached). On GNU/Linux, the example runs as expected.
This change is trivial:
If the supplied timeout value is negative, truncate it to -1.
Support for RFCOMM, L2CAP, HCI, SCO is based on the BTPROTO_* macros
being defined. Winsock only supports RFCOMM, even though it has a
BTHPROTO_L2CAP macro. L2CAP support would build on windows, but not
necessarily work.
This also adds some basic unittests for constants (all of which existed
prior to this commit, just not on windows) and creating sockets.
pair: Nate Duarte <slacknate@gmail.com>
Expose the CAN_BCM SocketCAN constants used in the bcm_msg_head struct
flags (provided by <linux/can/bcm.h>) under the socket library.
This adds the following constants with a CAN_BCM prefix:
* SETTIMER
* STARTTIMER
* TX_COUNTEVT
* TX_ANNOUNCE
* TX_CP_CAN_ID
* RX_FILTER_ID
* RX_CHECK_DLC
* RX_NO_AUTOTIMER
* RX_ANNOUNCE_RESUME
* TX_RESET_MULTI_IDX
* RX_RTR_FRAME
* CAN_FD_FRAME
The CAN_FD_FRAME flag was introduced in the 4.8 kernel, while the other
ones were present since SocketCAN drivers were mainlined in 2.6.25. As
such, it is probably unnecessary to guard against these constants being
missing.
At the moment you can definitely use UDPLITE sockets on Linux systems, but it would be good if this support were formalized such that you can detect support at runtime easily.
At the moment, to make and use a UDPLITE socket requires something like the following code:
```
>>> import socket
>>> a = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, 136)
>>> b = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, 136)
>>> a.bind(('localhost', 44444))
>>> b.sendto(b'test'*256, ('localhost', 44444))
>>> b.setsockopt(136, 10, 16)
>>> b.sendto(b'test'*256, ('localhost', 44444))
>>> b.setsockopt(136, 10, 32)
>>> b.sendto(b'test'*256, ('localhost', 44444))
>>> b.setsockopt(136, 10, 64)
>>> b.sendto(b'test'*256, ('localhost', 44444))
```
If you look at this through Wireshark, you can see that the packets are different in that the checksums and checksum coverages change.
With the pull request that I am submitting momentarily, you could do the following code instead:
```
>>> import socket
>>> a = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDPLITE)
>>> b = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.IPPROTO_UDPLITE)
>>> a.bind(('localhost', 44444))
>>> b.sendto(b'test'*256, ('localhost', 44444))
>>> b.set_send_checksum_coverage(16)
>>> b.sendto(b'test'*256, ('localhost', 44444))
>>> b.set_send_checksum_coverage(32)
>>> b.sendto(b'test'*256, ('localhost', 44444))
>>> b.set_send_checksum_coverage(64)
>>> b.sendto(b'test'*256, ('localhost', 44444))
```
One can also detect support for UDPLITE just by checking
```
>>> hasattr(socket, 'IPPROTO_UDPLITE')
```
https://bugs.python.org/issue37345
It is now allowed to add new fields at the end of the PyTypeObject struct without having to allocate a dedicated compatibility flag in tp_flags.
This will reduce the risk of running out of bits in the 32-bit tp_flags value.
Add Clang Memory Sanitizer build instrumentation to work around
false positives from the socket and time modules as well as skipping
a couple test_faulthandler tests.
The length check for AF_ALG salg_name and salg_type had a off-by-one
error. The code assumed that both values are not necessarily NULL
terminated. However the Kernel code for alg_bind() ensures that the last
byte of both strings are NULL terminated.
Signed-off-by: Christian Heimes <christian@python.org>
Fix invalid function cast warnings with gcc 8
for method conventions different from METH_NOARGS, METH_O and
METH_VARARGS excluding Argument Clinic generated code.
METH_NOARGS functions need only a single argument but they are cast
into a PyCFunction, which takes two arguments. This triggers an
invalid function cast warning in gcc8 due to the argument mismatch.
Fix this by adding a dummy unused argument.
Steve Dower
Rui Cunha
Erlend Egeberg Aasland
Christian Heimes
Serhiy Storchaka
Victor Stinner
karl ding
Zackery Spytz
Andy Lester
bggardner
Greg Price
Artem Khramov
Greg Bowser
Gabe Appleton
Jeroen Demeyer
Antoine Pitrou
Steve Dower
Giampaolo Rodola
Inada Naoki
Jakub Kulík
Gregory P. Smith
Dima Tisnek
Bjorn Andersson
Cheryl Sabella
Oren Milman
Erik Janssens
Siddhesh Poyarekar
animalize
Коренберг Марк
Leo Arias