In _localemodule.c and selectmodule.c, remove dead code that would
cause double decrefs if run.
In addition, replace PyList_SetItem() with PyList_SET_ITEM() in cases
where a new list is populated and there is no possibility of an error.
In addition, check if the list changed size in the loop in array_array_fromlist().
Fix invalid function cast warnings with gcc 8
for method conventions different from METH_NOARGS, METH_O and
METH_VARARGS in Argument Clinic generated code.
* Convert PyObject_INIT() and PyObject_INIT_VAR() macros to static
inline functions.
* Fix usage of these functions: cast to PyObject* or PyVarObject*.
Reduce the knotty preprocessor conditional logic, dedent unnecessarily nested
code, and handle errors properly.
The first edition of this change (afde1c1a05)
failed (bpo-34715) because FreeBSD doesn't define the timezone globals. That's
why we're now checking for HAVE_DECL_TZNAME.
* _PyCoreConfig: add isolated and site_import attributes
* Replace Py_IgnoreEnvironment with config->ignore_environment when
reading the current configuration
* _PyCoreConfig_Read() now sets ignore_environment, utf8_mode,
isolated and site_import from Py_IgnoreEnvironment, Py_UTF8Mode,
Py_IsolatedFlag and Py_NoSiteFlag
* _Py_InitializeCore() now sets Py_xxx flags from the configuration
* pymain_read_conf() now uses _PyCoreConfig_Copy() to save/restore
the configuration.
* Rename _disable_importlib of _PyCoreConfig to _install_importlib
* _PyCoreConfig_SetGlobalConfig() now also set
Py_HashRandomizationFlag
* Replace !Py_NoSiteFlag with core_config->site_import
* _PyCoreConfig_Read() no longer directly modifies Py_IsolatedFlag
and Py_NoSiteFlag global configuration flags. The function now
requires two pointers to integer, so these flags can be set later,
to avoid side effets in _PyCoreConfig_Read().
* pathconfig_global_init() now leaves Py_IsolatedFlag and
Py_NoSiteFlag unchanged.
* Fix pathconfig_global_init(): avoid computing the path
configuration twice, use _PyCoreConfig_SetPathConfig().
Rework _PyCoreConfig_Read() function which *reads* core configuration
to not *modify* the path configuration.
A new _PyCoreConfig_SetPathConfig() function now recreates the path
configuration from the core configuration. This function is now
called very late in _Py_InitializeCore(), just before calling
initimport().
Changes:
* Add _PyCoreConfig.dll_path
* Py_SetPath() now fails with a fatal python error on memory
allocation failure.
* Rename _PyPathConfig_Calculate() to _PyPathConfig_Calculate_impl()
* Replace _PyPathConfig_Init() with _PyPathConfig_Calculate(): the
function now requires a _PyPathConfig
* Add _PyPathConfig_SetGlobal() to set the _Py_path_config global
variable.
* Add _PyCoreConfig_InitPathConfig(): compute the path configuration
* Add _PyCoreConfig_SetPathConfig(): set path configuration from core
configuration
* Rename wstrlist_append() to _Py_wstrlist_append()
* _Py_wstrlist_append() now handles integer overflow.
During development of the limited API support for PySide,
we saw an error in a macro that accessed a type field.
This patch fixes the 7 errors in the Python headers.
Macros which were not written as capitals were implemented
as function.
To do the necessary analysis again, a script was included that
parses all headers and looks for "->tp_" in serctions which can
be reached with active limited API.
It is easily possible to call this script as a test.
Error listing:
../../Include/objimpl.h:243
#define PyObject_IS_GC(o) (PyType_IS_GC(Py_TYPE(o)) && \
(Py_TYPE(o)->tp_is_gc == NULL || Py_TYPE(o)->tp_is_gc(o)))
Action: commented only
../../Include/objimpl.h:362
#define PyType_SUPPORTS_WEAKREFS(t) ((t)->tp_weaklistoffset > 0)
Action: commented only
../../Include/objimpl.h:364
#define PyObject_GET_WEAKREFS_LISTPTR(o) \
((PyObject **) (((char *) (o)) + Py_TYPE(o)->tp_weaklistoffset))
Action: commented only
../../Include/pyerrors.h:143
#define PyExceptionClass_Name(x) \
((char *)(((PyTypeObject*)(x))->tp_name))
Action: implemented function
../../Include/abstract.h:593
#define PyIter_Check(obj) \
((obj)->ob_type->tp_iternext != NULL && \
(obj)->ob_type->tp_iternext != &_PyObject_NextNotImplemented)
Action: implemented function
../../Include/abstract.h:713
#define PyIndex_Check(obj) \
((obj)->ob_type->tp_as_number != NULL && \
(obj)->ob_type->tp_as_number->nb_index != NULL)
Action: implemented function
../../Include/abstract.h:924
#define PySequence_ITEM(o, i)\
( Py_TYPE(o)->tp_as_sequence->sq_item(o, i) )
Action: commented only
* Set the limited API version for PyImport_GetModule and PyOS_*Fork
functions.
* Add PyImport_GetModule and Py_UTF8Mode in PC/python3.def.
* Add several functions in Doc/data/refcounts.dat.
METH_NOARGS functions need only a single argument but they are cast
into a PyCFunction, which takes two arguments. This triggers an
invalid function cast warning in gcc8 due to the argument mismatch.
Fix this by adding a dummy unused argument.
This is not the ideal solution; this means that a test module is now
always included in the main python3x.dll. However, we're already
including xxsubtype, so why not?
bpo-31399: Let OpenSSL verify hostname and IP
The ssl module now uses OpenSSL's X509_VERIFY_PARAM_set1_host() and
X509_VERIFY_PARAM_set1_ip() API to verify hostname and IP addresses.
* Remove match_hostname calls
* Check for libssl with set1_host, libssl must provide X509_VERIFY_PARAM_set1_host()
* Add documentation for OpenSSL 1.0.2 requirement
* Don't support OpenSSL special mode with a leading dot, e.g. ".example.org" matches "www.example.org". It's not standard conform.
* Add hostname_checks_common_name
Signed-off-by: Christian Heimes <christian@python.org>
_PyCoreConfig_Read() is now responsible to compute sys.path.
So sys.path is now computed before calling _Py_InitializeCore().
Changes:
* Add module_search_path, module_search_paths, executable, prefix,
base_prefix, exec_prefix and base_exec_prefix to _PyCoreConfig.
* _PyMainInterpreterConfig_Read() now only converts wchar_t** lists
into a Python list, it doesn't compute sys.path anymore.
Add a new _Py_FindEnvConfigValue() function: code shared between
Windows and Unix implementations of _PyPathConfig_Calculate() to read
the pyenv.cfg file.
_Py_FindEnvConfigValue() now uses _Py_DecodeUTF8_surrogateescape()
instead of using a Python Unicode string, the Python API must not be
used early during Python initialization. Same change in Unix
search_for_exec_prefix(): use _Py_DecodeUTF8_surrogateescape().
Cleanup also encode_current_locale(): PyMem_RawFree/PyMem_Free can be
called with NULL.
Fix also "NUL byte" => "NULL byte" typo.
_PyMainInterpreterConfig now contains Python objects, whereas
_PyCoreConfig contains wchar_t* strings.
Core config:
* Rename _PyMainInterpreterConfig_ReadEnv() to _PyCoreConfig_ReadEnv()
* Move 3 strings from _PyMainInterpreterConfig to _PyCoreConfig:
module_search_path_env, home, program_name.
* Add _PyCoreConfig_Clear()
* _PyPathConfig_Calculate() now takes core config rather than main
config
* _PyMainInterpreterConfig_Read() now requires also a core config
Main config:
* Add _PyMainInterpreterConfig.module_search_path: sys.path list
* Add _PyMainInterpreterConfig.argv: sys.argv list
* _PyMainInterpreterConfig_Read() now computes module_search_path
_PyPathConfig_Init() now also initialize home and program_name:
* Rename existing _PyPathConfig_Init() to _PyPathConfig_Calculate().
Add a new _PyPathConfig_Init() function in pathconfig.c which
handles the _Py_path_config variable and call
_PyPathConfig_Calculate().
* Add home and program_name fields to _PyPathConfig.home
* _PyPathConfig_Init() now initialize home and program_name
from main_config
* Py_SetProgramName(), Py_SetPythonHome() and Py_GetPythonHome() now
calls Py_FatalError() on failure, instead of silently ignoring
failures.
* config_init_home() now gets directly _Py_path_config.home to only
get the value set by Py_SetPythonHome(), or NULL if
Py_SetPythonHome() was not called.
* config_get_program_name() now gets directly
_Py_path_config.program_name to only get the value set by
Py_SetProgramName(), or NULL if Py_SetProgramName() was not called.
* pymain_init_python() doesn't call Py_SetProgramName() anymore,
_PyPathConfig_Init() now always sets the program name
* Call _PyMainInterpreterConfig_Read() in
pymain_parse_cmdline_envvars_impl() to control the memory allocator
* C API documentation: it's no more safe to call Py_GetProgramName()
before Py_Initialize().
* Factorize code from PC/getpathp.c and Modules/getpath.c to remove
duplicated code
* rename pathconfig_clear() to _PyPathConfig_Clear()
* Inline _PyPathConfig_Fini() in pymain_impl() and then remove it,
since it's a oneliner
Changes:
* _PyPathConfig_Fini() cannot be called in Py_FinalizeEx().
Py_Initialize() and Py_Finalize() can be called multiple times, but
it must not "forget" parameters set by Py_SetProgramName(),
Py_SetPath() or Py_SetPythonHome(), whereas _PyPathConfig_Fini()
clear all these parameters.
* config_get_program_name() and calculate_program_full_path() now
also decode paths using Py_DecodeLocale() to use the
surrogateescape error handler, rather than decoding using
mbstowcs() which is strict.
* Change _Py_CheckPython3() prototype: () => (void)
* Truncate a few lines which were too long
Steve Dower
Zackery Spytz
Victor Stinner
Serhiy Storchaka
Brendan Gerrity
Benjamin Peterson
erikjanss
Christian Tismer
Siddhesh Poyarekar
Ivan Levkivskyi
Zachary Ware
oldk
Ned Deily
Christian Heimes
Victor Stinner