* gh-119118: Fix performance regression in tokenize module
- Cache line object to avoid creating a Unicode object
for all of the tokens in the same line.
- Speed up byte offset to column offset conversion by using the
smallest buffer possible to measure the difference.
Co-authored-by: Pablo Galindo <pablogsal@gmail.com>
pathlib now treats "`.`" as a valid file extension (suffix). This brings
it in line with `os.path.splitext()`.
In the (private) pathlib ABCs, we add a new `ParserBase.splitext()` method
that splits a path into a `(root, ext)` pair, like `os.path.splitext()`.
This method is called by `PurePathBase.stem`, `suffix`, etc. In a future
version of pathlib, we might make these base classes public, and so users
will be able to define their own `splitext()` method to control file
extension splitting.
In `pathlib.PurePath` we add optimised `stem`, `suffix` and `suffixes`
properties that don't use `splitext()`, which avoids computing the path
base name twice.
The assertion was added in gh-118532 but was based on the invalid assumption that PyState_FindModule() would only be called with an already-initialized module def. I've added a test to make sure we don't make that assumption again.
``_fancy_replace()`` is no longer recursive. and a single call does a worst-case linear number of ratio() computations instead of quadratic. This renders toothless a universe of pathological cases. Some inputs may produce different output, but that's rare, and I didn't find a case where the final diff appeared to be of materially worse quality. To the contrary, by refusing to even consider synching on lines "far apart", there was more easy-to-digest locality in the output.
Add socket.VMADDR_CID_LOCAL constant.
Fix ThreadedVSOCKSocketStreamTest: if get_cid() returns the host
address or the "any" address, use the local communication address
(loopback): VMADDR_CID_LOCAL.
On Linux 6.9, apparently, the /dev/vsock device is now available but
get_cid() returns VMADDR_CID_ANY (-1).
ensurepip forks a subprocess to run pip itself, but that subprocess only inherits a -I isolated mode flag (see _run_pip() in Lib/ensurepip/__init__.py), not the "-E -s" flags that the installer has been using. This means that parts of ensurepip don't actually run in an isolated environment and can make incorrect decisions based on packages installed in the user site-packages.
Add `Py_BEGIN_CRITICAL_SECTION_SEQUENCE_FAST` and
`Py_END_CRITICAL_SECTION_SEQUENCE_FAST` macros and update `str.join` to use
them. Also add a regression test that would crash reliably without this
patch.
_PyArg_Parser holds static global data generated for modules by Argument Clinic. The _PyArg_Parser.kwtuple field is a tuple object, even though it's stored within a static global. In some cases the tuple is statically allocated and thus it's okay that it gets shared by multiple interpreters. However, in other cases the tuple is set lazily, allocated from the heap using the active interprepreter at the point the tuple is needed.
This is a problem once that interpreter is destroyed since _PyArg_Parser.kwtuple becomes at dangling pointer, leading to crashes. It isn't a problem if the tuple is allocated under the main interpreter, since its lifetime is bound to the lifetime of the runtime. The solution here is to temporarily switch to the main interpreter. The alternative would be to always statically allocate the tuple.
This change also fixes a bug where only the most recent parser was added to the global linked list.
Fix regression introduced in gh-100884: AttributeError when re-fold a long
address list.
Also fix more cases of incorrect encoding of the address separator in the
address list missed in gh-100884.
* bpo-15987: Implement ast.compare
Add a compare() function that compares two ASTs for structural equality. There are two set of attributes on AST node objects, fields and attributes. The fields are always compared, since they represent the actual structure of the code. The attributes can be optionally be included in the comparison. Attributes capture things like line numbers of column offsets, so comparing them involves test whether the layout of the program text is the same. Since whitespace seems inessential for comparing ASTs, the default is to compare fields but not attributes.
ASTs are just Python objects that can be modified in arbitrary ways. The API for ASTs is under-specified in the presence of user modifications to objects. The comparison respects modifications to fields and attributes, and to _fields and _attributes attributes. A user could create obviously malformed objects, and the code will probably fail with an AttributeError when that happens. (For example, adding "spam" to _fields but not adding a "spam" attribute to the object.)
Co-authored-by: Jeremy Hylton <jeremy@alum.mit.edu>
The PEP 649 implementation will require a way to load NotImplementedError
from the bytecode. @markshannon suggested implementing this by converting
LOAD_ASSERTION_ERROR into a more general mechanism for loading constants.
This PR adds this new opcode. I will work on the rest of the implementation
of the PEP separately.
Co-authored-by: Irit Katriel <1055913+iritkatriel@users.noreply.github.com>
regrtest test runner: Add XML support to the refleak checker
(-R option).
* run_unittest() now stores XML elements as string, rather than
objects, in support.junit_xml_list.
* runtest_refleak() now saves/restores XML strings before/after
checking for reference leaks. Save XML into a temporary file.
* Fix for email.generator.Generator with whitespace between encoded words.
email.generator.Generator currently does not handle whitespace between
encoded words correctly when the encoded words span multiple lines. The
current generator will create an encoded word for each line. If the end
of the line happens to correspond with the end real word in the
plaintext, the generator will place an unencoded space at the start of
the subsequent lines to represent the whitespace between the plaintext
words.
A compliant decoder will strip all the whitespace from between two
encoded words which leads to missing spaces in the round-tripped
output.
The fix for this is to make sure that whitespace between two encoded
words ends up inside of one or the other of the encoded words. This
fix places the space inside of the second encoded word.
A second problem happens with continuation lines. A continuation line that
starts with whitespace and is followed by a non-encoded word is fine because
the newline between such continuation lines is defined as condensing to
a single space character. When the continuation line starts with whitespace
followed by an encoded word, however, the RFCs specify that the word is run
together with the encoded word on the previous line. This is because normal
words are filded on syntactic breaks by encoded words are not.
The solution to this is to add the whitespace to the start of the encoded word
on the continuation line.
Test cases are from #92081
* Rename a variable so it's not confused with the final variable.
Code from https://github.com/pulkin, in PR
https://github.com/python/cpython/pull/119131
Greatly speeds `Differ` when there are many identically scoring pairs, by splitting the recursion near the inputs' midpoints instead of degenerating (as now) into just peeling off the first two lines.
Co-authored-by: Tim Peters <tim.peters@gmail.com>
Asymptotically faster (O(n log n)) str->int for very large strings, leveraging the faster multiplication scheme in the C-coded `_decimal` when available. This is used instead of the current Karatsuba-limited method starting at 2 million digits.
Lots of opportunity remains for fine-tuning. Good targets include changing BYTELIM, and possibly changing the internal output base (from 256 to a higher number of bytes).
Doing this was substantial work, and many of the new lines are actually comments giving correctness proofs. The obvious approaches sticking to integers were too slow to be useful, so this is doing variable-precision decimal floating-point arithmetic. Much faster, but worst-possible rounding errors have to be wholly accounted for, using as little precision as possible.
Special thanks to Serhiy Storchaka for asking many good questions in his code reviews!
Co-authored-by: Jelle Zijlstra <jelle.zijlstra@gmail.com>
Co-authored-by: sstandre <43125375+sstandre@users.noreply.github.com>
Co-authored-by: Pieter Eendebak <pieter.eendebak@gmail.com>
Co-authored-by: Nice Zombies <nineteendo19d0@gmail.com>
Suppress all `OSError` exceptions from `pathlib.Path.exists()` and `is_*()`
rather than a selection of more common errors as we do presently. Also
adjust the implementations to call `os.path.exists()` etc, which are much
faster on Windows thanks to GH-101196.
Follow-up of gh-101693. The previous DeprecationWarning is replaced with
raising sqlite3.ProgrammingError.
Co-authored-by: Hugo van Kemenade <1324225+hugovk@users.noreply.github.com>
Remove support for supplying additional positional arguments to
`PurePath.relative_to()` and `is_relative_to()`. This has been deprecated
since Python 3.12.
_PyWeakref_ClearRef was previously exposed in the public C-API, although
it begins with an underscore and is not documented. It's used by a few
C-API extensions. There is currently no alternative public API that can
replace its use.
_PyWeakref_ClearWeakRefsExceptCallbacks is the only thread-safe way to
use _PyWeakref_ClearRef in the free-threaded build. This exposes the C
symbol, but does not make the API public.
Some embedders and extensions include parts of the internal API. The
pycore_mimalloc.h file is transitively include by a number of other
internal headers. This avoids include errors for code that was
already including those headers.
The `list_preallocate_exact` function did not zero initialize array
contents. In the free-threaded build, this could expose uninitialized
memory to concurrent readers between the call to
`list_preallocate_exact` and the filling of the array contents with
items.
Callbacks registered in the tkinter module now take arguments as
various Python objects (int, float, bytes, tuple), not just str.
To restore the previous behavior set tkinter module global wantobject to 1
before creating the Tk object or call the wantobject() method of the Tk object
with argument 1.
Calling it with argument 2 restores the current default behavior.
Fix an edge case in `binascii.a2b_base64` strict mode, where
excessive padding was not detected when no padding is necessary.
Co-authored-by: Terry Jan Reedy <tjreedy@udel.edu>
Co-authored-by: Pieter Eendebak <pieter.eendebak@gmail.com>
Rationale
=========
argparse performs a complex formatting of the usage for argument grouping
and for line wrapping to fit the terminal width. This formatting has been
a constant source of bugs for at least 10 years (see linked issues below)
where defensive assertion errors are triggered or brackets and paranthesis
are not properly handeled.
Problem
=======
The current implementation of argparse usage formatting relies on regular
expressions to group arguments usage only to separate them again later
with another set of regular expressions. This is a complex and error prone
approach that caused all the issues linked below. Special casing certain
argument formats has not solved the problem. The following are some of
the most common issues:
- empty `metavar`
- mutually exclusive groups with `SUPPRESS`ed arguments
- metavars with whitespace
- metavars with brackets or paranthesis
Solution
========
The following two comments summarize the solution:
- https://github.com/python/cpython/issues/82091#issuecomment-1093832187
- https://github.com/python/cpython/issues/77048#issuecomment-1093776995
Mainly, the solution is to rewrite the usage formatting to avoid the
group-then-separate approach. Instead, the usage parts are kept separate
and only joined together at the end. This allows for a much simpler
implementation that is easier to understand and maintain. It avoids the
regular expressions approach and fixes the corresponding issues.
This closes the following GitHub issues:
- #62090
- #62549
- #77048
- #82091
- #89743
- #96310
- #98666
These PRs become obsolete:
- #15372
- #96311
Add missing import to code that handles too large files and offsets.
Use list, not tuple, for a mutable sequence.
Add tests to prevent similar mistakes.
---------
Co-authored-by: Gregory P. Smith [Google LLC] <greg@krypto.org>
Co-authored-by: Kirill Podoprigora <kirill.bast9@mail.ru>
Irit Katriel
Sergey B Kirpichev
Jelle Zijlstra
Lysandros Nikolaou
Nikita Sobolev
Serhiy Storchaka
Alex Waygood
Barney Gale
Eric Snow
Pablo Galindo Salgado
Tim Peters
Nice Zombies
Victor Stinner
Mark Shannon
Xie Yanbo
Michael Vincent
Josh {*()} Rosenberg
Aya Elsayed
Batuhan Taskaya
Yan Yanchii
Wulian233
Hugo van Kemenade
Toshio Kuratomi
Erlend E. Aasland
Roy Hyunjin Han
pulkin
Donghee Na
Kirill Podoprigora
Brandt Bucher
Michał Górny
Tian Gao
Jacob Walls
Savannah Ostrowski
Petr Viktorin
mpage
Sam Gross
Dobatymo
Steve Dower
Radislav Chugunov
Raymond Hettinger
Thomas Wouters
chrysn
Youfu Zhang
Ali Hamdan
John Sirois