Fix test_asyncio timeouts: don't measure the maximum duration, a test
should not measure a CI performance. Only measure the minimum
duration when a task has a timeout or delay. Add CLOCK_RES to
test_asyncio.utils.
In the subprocess code path, wait until the child process completes
with a timeout of EXIT_TIMEOUT seconds.
Fix create_worker_process() regression: use start_new_session=True if
USE_PROCESS_GROUP is true.
WorkerThread.wait_stopped() uses a timeout of 60 seconds, instead of
30 seconds.
On Windows, multiprocessing Popen.terminate() now catchs
PermissionError and get the process exit code. If the process is
still running, raise again the PermissionError. Otherwise, the
process terminated as expected: store its exit code.
Fix race conditions in test_threading lock tests. Wait until a
condition is met rather than using time.sleep() with a hardcoded
number of seconds.
* Replace sleeping loops with support.sleeping_retry() which raises
an exception on timeout.
* Add wait_threads_blocked(nthread) which computes a sleep depending
on the number of threads. Remove _wait() function.
* test_set_and_clear(): use a way longer Event.wait() timeout.
* BarrierTests.test_repr(): wait until the 2 threads are waiting for
the barrier. Use a way longer timeout for Barrier.wait() timeout.
* test_thread_leak() no longer needs to count
len(threading.enumerate()): Bunch uses
threading_helper.wait_threads_exit() internally which does it in
wait_for_finished().
* Add BaseLockTests.wait_phase() which implements a timeout.
test_reacquire() and test_recursion_count() use wait_phase().
In 2003, test_pty got a hardcoded timeout of 10 seconds to prevent
hanging on AIX & HPUX "if run after test_openpty":
commit 7d8145268e. Since 2003, test_pty
was no longer reported to hang on AIX. But today, the test can fail
simply because a CI is busy running other tests in parallel.
The timeout of 10 seconds is no longer needed, just remove it.
Moreover, regrtest now has multiple built-in generic timeout
mecanisms.
Fix test_interprocess_signal() of test_signal. Make sure that the
subprocess.Popen object is deleted before the test raising an
exception in a signal handler. Otherwise, Popen.__del__() can get the
exception which is logged as "Exception ignored in: ...." and the
test fails.
* Split test_pycfunction.py: add test_cfunction_full.py.
Split the function into the following 6 functions. In verbose
mode, these "pycfunction" tests now log each tested call.
* test_pycfunction_noargs()
* test_pycfunction_o()
* test_pycfunction_varargs()
* test_pycfunction_varargs_keywords()
* test_pycfunction_fastcall()
* test_pycfunction_fastcall_keywords()
* Move get_gdb_repr() to PrettyPrintTests.
* Replace DebuggerTests.get_sample_script() with SAMPLE_SCRIPT.
* Rename checkout_hook_path to CHECKOUT_HOOK_PATH.
* Rename gdb_version to GDB_VERSION_TEXT.
* Replace (gdb_major_version, gdb_minor_version) with GDB_VERSION.
* run_gdb() uses "backslashreplace" error handler instead of "replace".
* Add check_gdb() function to util.py.
* Enhance support.check_cflags_pgo(): check also for sysconfig
PGO_PROF_USE_FLAG (if available) in compiler flags.
* Move some SkipTest checks to test_gdb/__init__.py.
* Elaborate why gdb cannot be tested on Windows: gdb doesn't support
PDB debug symbol files.
Fix test_timeout() of test_concurrent_futures.test_wait. Remove the
future which may or may not complete depending if it takes longer
than the timeout ot not. Keep the second future which does not
complete before wait(). Make also the test faster: 0.5 second instead
of 6 seconds, so remove @support.requires_resource('walltime')
decorator.
Split test_gdb.py file into a test_gdb package made of multiple
tests, so tests can now be run in parallel.
* Create Lib/test/test_gdb/ directory.
* Split test_gdb.py into multiple files in Lib/test/test_gdb/
directory.
* Move Lib/test/gdb_sample.py to Lib/test/test_gdb/ directory.
Update get_sample_script(): use __file__ to locate gdb_sample.py.
* Move gdb_has_frame_select() and HAS_PYUP_PYDOWN to test_misc.py.
* Explicitly skip test_gdb on Windows. Previously, test_gdb was
skipped even if gdb was available because of
gdb_has_frame_select().
Fix the test when run on an installed Python: use "abs_srcdir" of
sysconfig, and skip the test if the Python source code cannot be
found.
* Tools/patchcheck/patchcheck.py, Tools/freeze/test/freeze.py and
Lib/test/libregrtest/utils.py now first try to get "abs_srcdir"
from sysconfig, before getting "srcdir" from sysconfig.
* test.pythoninfo logs sysconfig "abs_srcdir".
WASM and WASI buildbots use multiple PYTHON environment variables
such as PYTHONPATH and _PYTHON_HOSTRUNNER. Don't use -E if the
--python=COMMAND option is used.
Fix copy_source_tree() function of test_tools.test_freeze:
* Don't copy SRC_DIR/build/ anymore. This directory is modified by
other tests running in parallel.
* Add test.support.copy_python_src_ignore().
* Use sysconfig to get the source directory.
* Use sysconfig.get_config_var() to get CONFIG_ARGS variable.
* On Windows, use subprocess.run() instead of os.execv().
* Only add needed options
* Rename reexec parameter to _add_python_opts.
* Rename --no-reexec option to --dont-add-python-opts.
Remove replace_stdout(): call sys.stdout.reconfigure() instead of set
the error handler to backslashreplace.
display_header() logs an empty line and flush stdout.
Remove encoding workaround in display_header() since stdout error
handler is now set to backslashreplace earlier.
When --fast-ci or --slow-ci option is used, regrtest now replaces the
current process with a new process to add "-u -W default -bb -E"
options to Python.
Changes:
* PCbuild/rt.bat and Tools/scripts/run_tests.py no longer need to add
"-u -W default -bb -E" options to Python: it's now done by
regrtest.
* Fix Tools/scripts/run_tests.py: flush stdout before replacing the
process. Previously, buffered messages were lost.
* Add --fast-ci and --slow-ci options to libregrtest:
* --fast-ci uses a default timeout of 10 minutes and "-u all,-cpu"
(skip slowest tests).
* --slow-ci uses a default timeout of 20 minues and "-u all" (run
all tests).
* regrtest header now lists test resources.
* Makefile changes:
* "make test", "make hostrunnertest" and "make coverage-report" now
use --fast-ci option and TESTTIMEOUT variable.
* "make buildbottest" now uses "--slow-ci". Remove options which
became redundant with "--slow-ci".
* "make testall" and "make testuniversal" now use --slow-ci option
and TESTTIMEOUT variable.
* "make testall" now uses "find -exec rm ..." instead of
"find ... -print|xargs rm ...", same as "make clean".
* GitHub Actions workflow:
* Ubuntu and Address Sanitizer jobs now use "make test". Remove
options which became redundant with "--fast-ci".
* Windows jobs now use --fast-ci option.
* Use -j0 to detect the number of CPUs.
* Set Makefile TESTTIMEOUT default to an empty string, since
--slow-ci and --fast-ci use different default timeout. It's now
accepted to pass "--timeout=" to regrtest: treated as not timeout.
* Tools/scripts/run_tests.py now uses --fast-ci option.
* Tools/buildbot/test.bat now uses --slow-ci option. Remove
--timeout=1200 option, redundant with --slow-ci.
test_error_at_task_unpickle() and
test_error_during_result_unpickle_in_result_handler() now restore
sys.stderr which is overriden by _raise_error_ignore_stderr().
* Refactor zipfile._strip_extra to use higher level abstractions for extras instead of a heavy-state loop.
* Add blurb
* Remove _strip_extra and use _Extra.strip directly.
* Use memoryview to avoid unnecessary copies while splitting Extras.
Fix test_zippath_from_non_installed_posix() of test_venv: don't copy
__pycache__/ sub-directories, because they can be modified by other
Python tests running in parallel.
* Factorize code listing "bad / env changed / ..." tests.
* Add TestResults.is_all_good() method.
* Move "All 400 tests OK." to the end
* Move "Test suite interrupted by signal SIGINT." to the end.
Expect the test to be "short" but don't measure the exact performance
of the CI. SHORT_TIMEOUT is about 30 seconds whereas the cancelled
coroutine takes around 1 hour.
Replace harcoded sleep of 500 ms with synchronization using a pipe.
Fix also Process._feed_stdin(): catch also BrokenPipeError on
stdin.write(input), not only on stdin.drain().
This fixes issue #105829, https://github.com/python/cpython/issues/105829
Co-authored-by: blurb-it[bot] <43283697+blurb-it[bot]@users.noreply.github.com>
Co-authored-by: Antoine Pitrou <antoine@python.org>
Co-authored-by: Chris Withers <chris@withers.org>
Co-authored-by: Thomas Moreau <thomas.moreau.2010@gmail.com>
Sometimes the child_handled event was missing because either
the child quits before it gets a chance to handle the signal,
or the parent asserts before the event notification is
delivered via IPC. Synchronize explicitly to avoid this.
SubprocessProtocol process_exited() method can be called before
pipe_data_received() and pipe_connection_lost() methods. Document it
and adapt the test for that.
Revert commit 282edd7b2a.
_child_watcher_callback() calls immediately _process_exited(): don't
add an additional delay with call_soon(). The reverted change didn't
make _process_exited() more determistic: it can still be called
before pipe_connection_lost() for example.
Co-authored-by: Davide Rizzo <sorcio@gmail.com>
Skip test_freeze_simple_script() of test_tools.test_freeze if Python
is built with "./configure --enable-optimizations", which means with
Profile Guided Optimization (PGO): it just makes the test too slow.
The freeze tool is tested by many other CIs with other (faster)
compiler flags.
test.pythoninfo now gets also get_build_info() of
test.libregrtests.utils.
The filename was previously intentionally omitted from exception because
"it might confuse the user". Uncaught exceptions are not generally a
replacement for user-facing error messages, so obscuring this
information only has the effect of making the programmer's life more
difficult.
PyMutex is a one byte lock with fast, inlineable lock and unlock functions for the common uncontended case. The design is based on WebKit's WTF::Lock.
PyMutex is built using the _PyParkingLot APIs, which provides a cross-platform futex-like API (based on WebKit's WTF::ParkingLot). This internal API will be used for building other synchronization primitives used to implement PEP 703, such as one-time initialization and events.
This also includes tests and a mini benchmark in Tools/lockbench/lockbench.py to compare with the existing PyThread_type_lock.
Uncontended acquisition + release:
* Linux (x86-64): PyMutex: 11 ns, PyThread_type_lock: 44 ns
* macOS (arm64): PyMutex: 13 ns, PyThread_type_lock: 18 ns
* Windows (x86-64): PyMutex: 13 ns, PyThread_type_lock: 38 ns
PR Overview:
The primary purpose of this PR is to implement PyMutex, but there are a number of support pieces (described below).
* PyMutex: A 1-byte lock that doesn't require memory allocation to initialize and is generally faster than the existing PyThread_type_lock. The API is internal only for now.
* _PyParking_Lot: A futex-like API based on the API of the same name in WebKit. Used to implement PyMutex.
* _PyRawMutex: A word sized lock used to implement _PyParking_Lot.
* PyEvent: A one time event. This was used a bunch in the "nogil" fork and is useful for testing the PyMutex implementation, so I've included it as part of the PR.
* pycore_llist.h: Defines common operations on doubly-linked list. Not strictly necessary (could do the list operations manually), but they come up frequently in the "nogil" fork. ( Similar to https://man.freebsd.org/cgi/man.cgi?queue)
---------
Co-authored-by: Eric Snow <ericsnowcurrently@gmail.com>
On a Python built in debug mode, Py_DECREF() now calls
_Py_NegativeRefcount() if the object is a dangling pointer to
deallocated memory: memory filled with 0xDD "dead byte" by the debug
hook on memory allocators. The fix is to check the reference count
*before* checking for _Py_IsImmortal().
Add test_decref_freed_object() to test_capi.test_misc.
This feature is off by default via code but on by default via the CLI. The `.gitignore` file contains `*` which causes the entire directory to be ignored.
Co-authored-by: Adam Turner <9087854+AA-Turner@users.noreply.github.com>
Co-authored-by: Hugo van Kemenade <hugovk@users.noreply.github.com>
libregrtest now decodes stdout of test worker processes with the
"backslashreplace" error handler to log corrupted stdout, instead of
failing with an error and not logging the stdout.
Builtin functions and methods that have non-representable signatures today
will have representable signatures yesterday, and they will become unusable
for testing this feature.
So we need to add special functions and methods to the _testcapi module
that always have non-representable signatures.
Fix test_gdb on Python built with LLVM clang 16 on Linux ppc64le (ex:
Fedora 38). Search patterns in gdb "bt" command output to detect
when gdb fails to retrieve the traceback. For example, skip a test if
"Backtrace stopped: frame did not save the PC" is found.
The test now calls free_tool_id() so it can be run multiple times in
the same process. For example, the following command no longer fails:
python -m test test_monitoring -R 3:3
On WASI platform, get_temp_dir() should behave differently since the
parent process is a WASI process and uses a different get_temp_dir()
path.
Fix also WorkerThread._runtest(): don't read JSON file if the worker
process exit code is non-zero.
On Emscripten and WASI, or if --python command line is used,
libregrtest now writes JSON into stdout, instead of using a name
file.
* Add JsonFileType.STDOUT.
* Remove JsonFileType.FILENAME.
* test.pythoninfo logs environment variables related to
cross-compilation and running Python on Emscripten/WASI.
On Emscripten and WASI platforms, or if --python command line option
is used, libregrtest now uses a filename for the JSON file.
Emscripten and WASI buildbot workers run the main test process with a
different Python (Linux) which spawns Emscripten/WASI processes using
the command specified in --python command line option. Passing a file
descriptor from the parent process to the child process doesn't work
in this case.
* Add JsonFile and JsonFileType classes
* Add RunTests.json_file_use_filename() method.
* Add a test in test_regrtest on the --python command line option.
* test_regrtest: add parallel=False parameter.
* Split long RunWorkers._runtest() function into sub-functions.
Fix Emscripten and WASI: start the test worker process in the Python
source code directory, where 'python.js' and 'python.wasm' can be
found. Then worker_process() changes to a temporary directory created
to run tests.
* create_worker_process() uses os_helper.SAVEDCWD as cwd.
* worker_process() uses get_temp_dir() as the parent directory for
get_work_dir().
* Don't use plural but singual for "test" in "Run 1 test ..."
message.
* Remove unused imports.
* Add WORK_DIR_PREFIX and WORKER_WORK_DIR_PREFIX constants.
Don't spawn more threads than the number of jobs: these worker
threads would never get anything to do.
* Add the number of tests in "Run ... tests in ..." message.
* Add RunTests.get_jobs() method.
* Add plural() function.
* count() uses f-string.
libregrtest now calls random.seed() before running each test file
when -r/--randomize command line option is used. Moreover, it's also
called in worker processes. It should help to make tests more
deterministic. Previously, it was only called once in the main
process before running all test files and it was not called in worker
processes.
* Convert some f-strings to regular strings in test_regrtest when
f-string is not needed.
* Remove unused all_methods variable from test_regrtest.
* Add RunTests members are now mandatory.
On Windows, skip the test if the current working directory and the
Python source code directory have different mount drives. It happens
if the temporary directory is on a different mount drive than the
Python source code.
Fix test_os.test_access_denied() when the TEMP environment variable
is equal to the current working directory. Run the test using a
different filename, since self.fname already exists in this case.
test_asyncio and test_compileall now clean up multiprocessing by
calling multiprocessing _cleanup_tests(): explicitly clean up
resources and stop background processes like the resource tracker.
* Rename SAVE_IP to _SET_IP
* Rename EXIT_TRACE to _EXIT_TRACE
* Rename SAVE_CURRENT_IP to _SAVE_CURRENT_IP
* Rename INSERT to _INSERT (This is for Ken Jin's abstract interpreter)
* Rename IS_NONE to _IS_NONE
* Rename JUMP_TO_TOP to _JUMP_TO_TOP
This adds a 16-bit inline cache entry to the conditional branch instructions POP_JUMP_IF_{FALSE,TRUE,NONE,NOT_NONE} and their instrumented variants, which is used to keep track of the branch direction.
Each time we encounter these instructions we shift the cache entry left by one and set the bottom bit to whether we jumped.
Then when it's time to translate such a branch to Tier 2 uops, we use the bit count from the cache entry to decided whether to continue translating the "didn't jump" branch or the "jumped" branch.
The counter is initialized to a pattern of alternating ones and zeros to avoid bias.
The .pyc file magic number is updated. There's a new test, some fixes for existing tests, and a few miscellaneous cleanups.
libregrtest now uses a separated file descriptor to write test result
as JSON. Previously, if a test wrote debug messages late around the
JSON, the main test process failed to parse JSON.
Rename TestResult.write_json() to TestResult.write_json_into().
worker_process() no longer writes an empty line at the end. There is
no need to separate test process output from the JSON output anymore,
since JSON is now written into a separated file descriptor.
create_worker_process() now always spawn the process with
close_fds=True.
* Rename runtest_mp.py to run_workers.py
* Move exit_timeout() and temp_cwd() context managers from
Regrtest.main() to Regrtest.run_tests(). Actions like --list-tests
or --list-cases don't need these protections.
* Regrtest: remove selected and tests attributes. Pass 'selected' to
list_tests(), list_cases() and run_tests(). display_result() now
expects a TestTuple, instead of TestList.
* Rename setup_tests() to setup_process() and rename setup_support()
to setup_tests().
* Move _adjust_resource_limits() to utils and rename it to
adjust_rlimit_nofile().
* Move replace_stdout() to utils.
* Fix RunTests.verbose type: it's an int.
* Pass results, quiet and pgo to Logger constructor.
* Move display_progress() method from Regrtest to Logger.
* No longer pass Regrtest to RunWorkers, but logger and results.
* Add single.py and result.py files.
* Rename runtest.py to runtests.py.
* Move run_single_test() function and its helper functions to
single.py.
* Move remove_testfn(), abs_module_name() and normalize_test_name()
to utils.py.
* Move setup_support() to setup.py.
* Move type hints like TestName to utils.py.
* Rename runtest.py to runtests.py.
Add new worker.py file:
* Move create_worker_process() and worker_process() to this file.
* Add main() function to worker.py. create_worker_process() now
runs the command: "python -m test.libregrtest.worker JSON".
* create_worker_process() now starts the worker process in the
current working directory. Regrtest now gets the absolute path of
the reflog.txt filename: -R command line option filename.
* Remove --worker-json command line option.
Remove test_regrtest.test_worker_json().
Related changes:
* Add write_json() and from_json() methods to TestResult.
* Rename select_temp_dir() to get_temp_dir() and move it to utils.
* Rename make_temp_dir() to get_work_dir() and move it to utils.
It no longer calls os.makedirs(): Regrtest.main() now calls it.
* Move fix_umask() to utils. The function is now called by
setup_tests().
* Move StrPath to utils.
* Add exit_timeout() context manager to utils.
* RunTests: Replace junit_filename (StrPath) with use_junit (bool).
Fix test_pyexpat.test_exception(): it can now be run from a directory
different than Python source code directory. Before, the test failed
in this case.
Skip the test if Modules/pyexpat.c source is not available. Skip also
the test on Python implementations other than CPython.
Fix test_site.test_underpth_basic() when the working directory
contains at least one non-ASCII character: encode the "._pth" file to
UTF-8 and enable the UTF-8 Mode to use UTF-8 for the child process
stdout.
Attempts to pickle or create a shallow or deep copy of codecs streams
now raise a TypeError.
Previously, copying failed with a RecursionError, while pickling
produced wrong results that eventually caused unpickling to fail with
a RecursionError.
* Add attributes to Regrtest and RunTests:
* fail_env_changed
* num_workers
* Rename MultiprocessTestRunner to RunWorkers. Add num_workers
parameters to RunWorkers constructor. Remove RunWorkers.ns
attribute.
* Rename TestWorkerProcess to WorkerThread.
* get_running() now returns a string like: "running (...): ...".
* Regrtest.action_run_tests() now selects the number of worker
processes, instead of the command line parser.
* Add attributes to Regrtest and RunTests:
* gc_threshold
* memory_limit
* python_cmd
* use_resources
* Remove WorkerJob class. Add as_json() and from_json() methods to
RunTests. A worker process now only uses RunTests for all
parameters.
* Add tests on support.set_memlimit() in test_support. Create
_parse_memlimit() and also adds tests on it.
* Remove 'ns' parameter from runtest.py.
* Rename dash_R() runtest_refleak(). The function now gets
huntrleaks and quiet arguments, instead of 'ns' argument.
* Add attributes to Regrtest and RunTests:
* verbose
* quiet
* huntrleaks
* test_dir
* Add HuntRefleak class.
Refator Regrtest class:
* Rename finalize() finalize_tests().
* Pass tracer to run_test() and finalize_tests(). Remove Regrtest.tracer.
* run_test() does less things: move code to its caller.
* Regrtest.__init__() now copies 'ns' namespace attributes to
Regrtest attributes. Regrtest match_tests and ignore_tests
attributes have type FilterTuple (tuple), instead of a list.
* Add RunTests.copy(). Regrtest._rerun_failed_tests() now uses
RunTests.copy().
* Replace Regrtest.all_tests (list) with Regrtest.first_runtests
(RunTests).
* Make random_seed maximum 10x larger (9 digits, instead of 8).
* main() now calls _parse_args() and pass 'ns' to Regrtest
constructor. Remove kwargs argument from Regrtest.main().
* _parse_args() checks ns.huntrleaks.
* set_temp_dir() is now responsible to call expanduser().
* Regrtest.main() sets self.tests earlier.
* Add TestTuple and TestList types.
* Rename MatchTests to FilterTuple and rename MatchTestsDict
to FilterTestDict.
* TestResult.get_rerun_match_tests() return type
is now FilterTuple: return a tuple instead of a list.
RunTests.tests type becomes TestTuple.
Symbols of the C API should be prefixed by "Py_" to avoid conflict
with existing names in 3rd party C extensions on "#include <Python.h>".
test.pythoninfo now logs Py_C_RECURSION_LIMIT constant and other
_testcapi and _testinternalcapi constants.
add guard so that ``Enum('bar')`` raises a TypeError instead of
creating a new enum class called `bar`. To create the new but
empty class, use:
huh = Enum('bar', names=())
Commit 13a00078b8 (#108663) made all
Python builds compatible with the Limited API, and removed the
LIMITED_API_AVAILABLE flag. However, some tests were still checking
for that flag, so they were now being incorrectly skipped. Remove
these checks to let these tests run again.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
It creates a modified copy of an object by calling the object's
__replace__() method.
It is a generalization of dataclasses.replace(), named tuple's _replace()
method and replace() methods in various classes, and supports all these
stdlib classes.
Statistics gathering is now off by default. Use the "-X pystats"
command line option or set the new PYTHONSTATS environment variable
to 1 to turn statistics gathering on at Python startup.
Statistics are no longer dumped at exit if statistics gathering was
off or statistics have been cleared.
Changes:
* Add PYTHONSTATS environment variable.
* sys._stats_dump() now returns False if statistics are not dumped
because they are all equal to zero.
* Add PyConfig._pystats member.
* Add tests on sys functions and on setting PyConfig._pystats to 1.
* Add Include/cpython/pystats.h and Include/internal/pycore_pystats.h
header files.
* Rename '_py_stats' variable to '_Py_stats'.
* Exclude Include/cpython/pystats.h from the Py_LIMITED_API.
* Move pystats.h include from object.h to Python.h.
* Add _Py_StatsOn() and _Py_StatsOff() functions. Remove
'_py_stats_struct' variable from the API: make it static in
specialize.c.
* Document API in Include/pystats.h and Include/cpython/pystats.h.
* Complete pystats documentation in Doc/using/configure.rst.
* Don't write "all zeros" stats: if _stats_off() and _stats_clear()
or _stats_dump() were called.
* _PyEval_Fini() now always call _Py_PrintSpecializationStats() which
does nothing if stats are all zeros.
Co-authored-by: Michael Droettboom <mdboom@gmail.com>
* Add get_recursion_available() and get_recursion_depth() functions
to the test.support module.
* Change infinite_recursion() default max_depth from 75 to 100.
* Fix test_tomllib recursion tests for WASI buildbots: reduce the
recursion limit and compute the maximum nested array/dict depending
on the current available recursion limit.
* test.pythoninfo logs sys.getrecursionlimit().
* Enhance test_sys tests on sys.getrecursionlimit()
and sys.setrecursionlimit().
Skip test_gdb if gdb is unable to retrieve Python frame objects: if a
frame is "<optimized out>". When Python is built with "clang -Og",
gdb can fail to retrive the 'frame' parameter of
_PyEval_EvalFrameDefault(). In this case, tests like py_bt() are
likely to fail. Without getting access to Python frames,
python-gdb.py is mostly clueless on retrieving the Python traceback.
Moreover, test_gdb is no longer skipped on macOS if Python is built
with Clang.
Fix a race condition in _ExecutorManagerThread.terminate_broken():
ignore the InvalidStateError on future.set_exception(). It can happen
if the future is cancelled before the caller.
Moreover, test_crash_big_data() now waits explicitly until the
executor completes.
Move the private _PyErr_WriteUnraisableMsg() functions to the
internal C API (pycore_pyerrors.h).
Move write_unraisable_exc() from _testcapi to _testinternalcapi.
When using --rerun option, regrtest now re-runs failed tests
in verbose mode in fresh worker processes to have more
deterministic behavior. So it can write its final report even
if a test killed a worker progress.
Add --fail-rerun option to regrtest: exit with non-zero exit code
if a test failed pass passed when re-run in verbose mode (in a
fresh process). That's now more useful since tests can pass
when re-run in a fresh worker progress, whereas they failed
when run after other tests when tests are run sequentially.
Rename --verbose2 option (-w) to --rerun. Keep --verbose2 as a
deprecated alias.
Changes:
* Fix and enhance statistics in regrtest summary. Add "(filtered)"
when --match and/or --ignore options are used.
* Add RunTests class.
* Add TestResult.get_rerun_match_tests() method
* Rewrite code to serialize/deserialize worker arguments as JSON
using a new WorkerJob class.
* Fix stats when a test is run with --forever --rerun.
* If failed test names cannot be parsed, log a warning and don't
filter tests.
* test_regrtest.test_rerun_success() now uses a marker file, since
the test is re-run in a separated process.
* Add tests on normalize_test_name() function.
* Add test_success() and test_skip() tests to test_regrtest.
- input checks for math_1(L989), math_1a(L1023), math_2(L1064,L1071), hypot(L2682), log(L2307), ldexp(L2168), ceil(L1165), floor(L1236,L1239) and dist(L2587,L2588,L2628).
- drop inaccessible "if" branch (L3518) in perm_comb_small()
- improve fsum coverage for exceptional cases (L1433,L1438,L1451,L1497), ditto fmod(L2378)
- rewrite modf to fix inaccessible case(L2229), ditto for pow(L2988)
(all line numbers are wrt the main branch at 5e6661bce9)
test_netrc, test_pep646_syntax and test_xml_etree now return results
in the test_main() function.
Changes:
* Rewrite TestResult as a dataclass with a new State class.
* Add test.support.TestStats class and Regrtest.stats_dict attribute.
* libregrtest.runtest functions now modify a TestResult instance
in-place.
* libregrtest summary lists the number of run tests and skipped
tests, and denied resources.
* Add TestResult.has_meaningful_duration() method.
* Compute TestResult duration in the upper function.
* Use time.perf_counter() instead of time.monotonic().
* Regrtest: rename 'resource_denieds' attribute to 'resource_denied'.
* Rename CHILD_ERROR to MULTIPROCESSING_ERROR.
* Use match/case syntadx to have different code depending on the
test state.
Co-authored-by: Alex Waygood <Alex.Waygood@Gmail.com>
* Add 'skipped' attribute to TestResults.
* Add 'skips' attribute to DocTestRunner.
* Rename private DocTestRunner._name2ft attribute
to DocTestRunner._stats.
* Use f-string for string formatting.
* Add some tests.
* Document DocTestRunner attributes and its API for statistics.
* Document TestResults class.
Co-authored-by: Alex Waygood <Alex.Waygood@Gmail.com>
The fix has two parts:
- When `-X uops` is detected, pass it on to the subprocess created to run the manufactured test.
I need this so I can run `./python -Xuops -m test test_regrtest` and see it fail without the next fix.
- Use `-R 6:3:` in `ArgsTestCase.test_huntrleaks` instead of `-R 3:3:` -- it takes longer to settle with `-X uops`.
Running test_fcntl logs two "struct.pack: ..." lines because
multiprocessing imports test_fcntl twice with
test.support.verbose=1. Move get_lockdata() inside TestFcntl test
case and only call it where it's needed, to stop logging these lines.
Argument Clinic now only includes pycore_gc.h if PyGC_Head is needed,
and only includes pycore_runtime.h if _Py_ID() is needed.
* Add 'condition' optional argument to Clinic.add_include().
* deprecate_keyword_use() includes pycore_runtime.h when using
the _PyID() function.
* Fix rendering of includes: comments start at the column 35.
* Mark PC/clinic/_wmimodule.cpp.h and
"Objects/stringlib/clinic/*.h.h" header files as generated in
.gitattributes.
Effects:
* 42 header files generated by AC no longer include the internal C
API, instead of 4 header files before. For example,
Modules/clinic/_abc.c.h no longer includes the internal C API.
* Fix _testclinic_depr.c.h: it now always includes pycore_runtime.h
to get _Py_ID().
This adds a new header that provides atomic operations on common data
types. The intention is that this will be exposed through Python.h,
although that is not the case yet. The only immediate use is in
the test file.
Co-authored-by: Sam Gross <colesbury@gmail.com>
When overriding the `__new__` method of an enum, the underlying data type should be created directly; i.e. .
member = object.__new__(cls)
member = int.__new__(cls, value)
member = str.__new__(cls, value)
Calling `super().__new__()` finds the lookup version of `Enum.__new__`, and will now raise an exception when detected.
Python built with "configure --with-trace-refs" (tracing references)
is now ABI compatible with Python release build and debug build.
Moreover, it now also supports the Limited API.
Change Py_TRACE_REFS build:
* Remove _PyObject_EXTRA_INIT macro.
* The PyObject structure no longer has two extra members (_ob_prev
and _ob_next).
* Use a hash table (_Py_hashtable_t) to trace references (all
objects): PyInterpreterState.object_state.refchain.
* Py_TRACE_REFS build is now ABI compatible with release build and
debug build.
* Limited C API extensions can now be built with Py_TRACE_REFS:
xxlimited, xxlimited_35, _testclinic_limited.
* No longer rename PyModule_Create2() and PyModule_FromDefAndSpec2()
functions to PyModule_Create2TraceRefs() and
PyModule_FromDefAndSpec2TraceRefs().
* _Py_PrintReferenceAddresses() is now called before
finalize_interp_delete() which deletes the refchain hash table.
* test_tracemalloc find_trace() now also filters by size to ignore
the memory allocated by _PyRefchain_Trace().
Test changes for Py_TRACE_REFS:
* Add test.support.Py_TRACE_REFS constant.
* Add test_sys.test_getobjects() to test sys.getobjects() function.
* test_exceptions skips test_recursion_normalizing_with_no_memory()
and test_memory_error_in_PyErr_PrintEx() if Python is built with
Py_TRACE_REFS.
* test_repl skips test_no_memory().
* test_capi skisp test_set_nomemory().
Remove _PyErr_ChainExceptions(), _PyErr_ChainExceptions1() and
_PyErr_SetFromPyStatus() functions from the public C API.
* Move the private _PyErr_ChainExceptions() and
_PyErr_ChainExceptions1() function to the internal C API
(pycore_pyerrors.h).
* Move the private _PyErr_SetFromPyStatus() to the internal C API
(pycore_initconfig.h).
* No longer export the _PyErr_ChainExceptions() function.
* Move run_in_subinterp_with_config() from _testcapi to
_testinternalcapi.
The test was skipped in 2011 by
commit 89ba56d5fb.
Scripts in Lib/test/crashers/ do not crash on a reliable way. They
rely on undefined behaviors, like state of the stack memory, and so
may or may not crash. It is not worth it to make sure that they crash
in a continious integration, they should be run manually time to time
instead.
gh-107275 introduced a regression where a SemLock would fail being passed along nested child processes, as the `is_fork_ctx` attribute would be left missing after the first deserialization.
---------
Co-authored-by: blurb-it[bot] <43283697+blurb-it[bot]@users.noreply.github.com>
Co-authored-by: Antoine Pitrou <pitrou@free.fr>
Deprecate passing the callback callable by keyword for the following
sqlite3.Connection APIs:
- set_authorizer(authorizer_callback)
- set_progress_handler(progress_handler, ...)
- set_trace_callback(trace_callback)
The affected parameters will become positional-only in Python 3.15.
This mis-initialization caused the executor optimization to kick in sooner than intended. It also set the lower 4 bits of the counter to `1` -- those bits are supposed to be reserved (the actual counter is in the upper 12 bits).
Change the pure Python implementation of stat.filemode() for unknown
file type: use "?", as done by the _stat.filemode().
test_stat skips TestFilemodeCStat if the _stat extension is missing.
Add test_sqlite_row_keys() to explicitly test sqlite3.Row.keys().
Cleanups:
- Reduce test noise by converting docstrings to regular comments
- Reduce boilerplate code by adding a setUp() method to RowFactoryTests
Co-authored-by: Erlend E. Aasland <erlend@python.org>
Deprecate passing name, number of arguments, and the callable as keyword
arguments, for the following sqlite3.Connection APIs:
- create_function(name, nargs, callable, ...)
- create_aggregate(name, nargs, callable)
The affected parameters will become positional-only in Python 3.15.
Refactor the CLI so we can easily invoke it and mock command-line
arguments. Adapt the CLI tests so we no longer have to launch a
separate process.
Disable the busy handler for all concurrency tests; we have full
control over the order of the SQLite C API calls, so we can safely
do this.
The sqlite3 test suite now completes ~8 times faster than before.
Co-authored-by: Serhiy Storchaka <storchaka@gmail.com>
Victor Stinner
Jelle Zijlstra
Irit Katriel
Davide Rizzo
Nikita Sobolev
Eric Snow
Dale Collison
Sam Gross
Serhiy Storchaka
Barney Gale
Antoine Pitrou
Jason R. Coombs
Alex Waygood
Pablo Galindo Salgado
elfstrom
EliseevEgor
AN Long
Heinz-Alexander Fuetterer
Benjamin Peterson
Ronan Pigott
Jenner
Tian Gao
Shantanu
Brett Cannon
Gregory P. Smith
buermarc
Carl Meyer
Brandt Bucher
Hugo van Kemenade
Guido van Rossum
Mark Shannon
云line
Pieter Eendebak
Kumar Aditya
Ethan Furman
Ee Durbin
Ijtaba Hussain
Anders Kaseorg
Dong-hee Na
Matthias Bussonnier
Anthony Shaw
Petr Viktorin
Sangyun_LEE
Sergey B Kirpichev
albanD
Erlend E. Aasland
Corvin
Jochen Sprickerhof
Edward Schauman-Haigh
Adam Turner