The patch also adds acosh, asinh, atanh, log1p and copysign to all platforms. Finally it fixes differences between platforms like different results or exceptions for edge cases. Have fun :)
Rather than sprinkle casts throughout the code, change Py_CHARMASK to
always cast it's result to an unsigned char. This should ensure we
do the right thing when accessing an array with the result.
Added 0b and 0o literals to tokenizer.
Modified PyOS_strtoul to support 0b and 0o inputs.
Modified PyLong_FromString to support guessing 0b and 0o inputs.
Renamed test_hexoct.py to test_int_literal.py and added binary tests.
Added upper and lower case 0b, 0O, and 0X tests to test_int_literal.py
Highlights:
- Adding PyObject_Format.
- Adding string.Format class.
- Adding __format__ for str, unicode, int, long, float, datetime.
- Adding builtin format.
- Adding ''.format and u''.format.
- str/unicode fixups for formatters.
The files in Objects/stringlib that implement PEP 3101 (stringdefs.h,
unicodedefs.h, formatter.h, string_format.h) are identical in trunk
and py3k. Any changes from here on should be made to trunk, and
changes will propogate to py3k).
_PyLong_Format. In longobject.c, changed long_format to
_PyLong_Format. In intobject.c, changed uses of PyOS_snprintf to
_PyInt_Format instead.
_PyLong_Format is similar to py3k's routine of the same name, except
it has 2 additional parameters: addL and newstyle. addL was existing
in long_format, and controls adding the trailing "L". This is
unneeded in py3k. newstyle is used to control whether octal prepends
"0" (the pre-2.6 style), or "0o" (the 3.0 sytle).
PyNumber_ToBase is needed for PEP 3127 (Integer Literal Support and
Syntax) and PEP 3101 (Advanced String Formatting).
This changeset does not need merging into py3k.
First chapter of the Python 3.0 io framework back port: _fileio
The next step depends on a working bytearray type which itself depends on a backport of the nwe buffer API.
round included:
* Revert round to its 2.6 behavior (half away from 0).
* Because round, floor, and ceil always return float again, it's no
longer necessary to have them delegate to __xxx___, so I've ripped
that out of their implementations and the Real ABC. This also helps
in implementing types that work in both 2.6 and 3.0: you return int
from the __xxx__ methods, and let it get enabled by the version
upgrade.
* Make pow(-1, .5) raise a ValueError again.
the complex_pow part), r56649, r56652, r56715, r57296, r57302, r57359, r57361,
r57372, r57738, r57739, r58017, r58039, r58040, and r59390, and new
documentation. The only significant difference is that round(x) returns a float
to preserve backward-compatibility. See http://bugs.python.org/issue1689.
predictable to being completely predictable. The value of hash(n)
is unchanged for any n that's small enough to be representable as an
int, and also unchanged for the vast majority of long integers n of
reasonable size.
- Reenable modules on x64 that had been disabled aeons ago for Itanium.
- Cleared up confusion about compilers for 64 bit windows. There is only Itanium and x64. Added macros MS_WINI64 and MS_WINX64 for those rare cases where it matters, such as the disabling of modules above.
- Set target platform (_WIN32_WINNT and WINVER) to 0x0501 (XP) for x64, and 0x0400 (NT 4.0) otherwise, which are the targeted minimum platforms.
- Fixed thread_nt.h. The emulated InterlockedCompareExchange function didn´t work on x64, probaby due to the lack of a "volatile" specifier. Anyway, win95 is no longer a target platform.
- Itertools module used wrong constant to check for overflow in count()
- PyInt_AsSsize_t couldn't deal with attribute error when accessing the __long__ member.
- PyLong_FromSsize_t() incorrectly specified that the operand were unsigned.
With these changes, the x64 passes the testsuite, for those modules present.
of some of the common builtin types.
Use a bit in tp_flags for each common builtin type. Check the bit
to determine if any instance is a subclass of these common types.
The check avoids a function call and O(n) search of the base classes.
The check is done in the various Py*_Check macros rather than calling
PyType_IsSubtype().
All the bits are set in tp_flags when the type is declared
in the Objects/*object.c files because PyType_Ready() is not called
for all the types. Should PyType_Ready() be called for all types?
If so and the change is made, the changes to the Objects/*object.c files
can be reverted (remove setting the tp_flags). Objects/typeobject.c
would also have to be modified to add conditions
for Py*_CheckExact() in addition to each the PyType_IsSubtype check.
* unified the way intobject, longobject and mystrtoul handle
values around -sys.maxint-1.
* in general, trying to entierely avoid overflows in any computation
involving signed ints or longs is extremely involved. Fixed a few
simple cases where a compiler might be too clever (but that's all
guesswork).
* more overflow checks against bad data in marshal.c.
* 2.5 specific: fixed a number of places that were still confusing int
and Py_ssize_t. Some of them could potentially have caused
"real-world" breakage.
* list.pop(x): fixing overflow issues on x was messy. I just reverted
to PyArg_ParseTuple("n"), which does the right thing. (An obscure
test was trying to give a Decimal to list.pop()... doesn't make
sense any more IMHO)
* trying to write a few tests...
I modified this patch some by fixing style, some error checking, and adding
XXX comments. This patch requires review and some changes are to be expected.
I'm checking in now to get the greatest possible review and establish a
baseline for moving forward. I don't want this to hold up release if possible.
a new comment) suggests there are almost certainly large input
integers in all non-binary input bases for which one Python digit
too few is initally allocated to hold the final result. Instead
of assert-failing when that happens, allocate more space. Alas,
I estimate it would take a few days to find a specific such case,
so this isn't backed up by a new test (not to mention that such
a case may take hours to run, since conversion time is quadratic
in the number of digits, and preliminary attempts suggested that
the smallest such inputs contain at least a million digits).
The SIGCHECK macro defined here has always been bizarre, but
it apparently causes compiler warnings on "Sun Studio 11".
I believe the warnings are bogus, but it doesn't hurt to make
the macro definition saner.
Bugfix candidate (but I'm not going to bother).
both mystrtoul.c and longobject.c. Share the table instead. Also
cut its size by 64 entries (they had been used for an inscrutable
trick originally, but the code no longer tries to use that trick).
longobject.c: also fix an ssize_t problem
<a> could have been NULL, so hoist the size calc to not use <a>.
_ssl.c: under fail: self is DECREF'd, but it would have been NULL.
_elementtree.c: delete self if there was an error.
_csv.c: I'm not sure if lineterminator could have been anything other than
a string. However, other string method calls are checked, so check this
one too.
to avoid confusing situations like:
>>> int("")
ValueError: invalid literal for int():
>>> int("2\n\n2")
ValueError: invalid literal for int(): 2
2
Also report the base used, to avoid:
ValueError: invalid literal for int(): 2
They now report:
>>> int("")
ValueError: invalid literal for int() with base 10: ''
>>> int("2\n\n2")
ValueError: invalid literal for int() with base 10: '2\n\n2'
>>> int("2", 2)
ValueError: invalid literal for int() with base 2: '2'
(Reporting the base could be avoided when base is 10, which is the default,
but hrm.) Another effect of these changes is that the errormessage can be
longer; before, it was cut off at about 250 characters. Now, it can be up to
four times as long, as the unrepr'ed string is cut off at 200 characters,
instead.
No tests were added or changed, since testing for exact errormsgs is (pardon
the pun) somewhat errorprone, and I consider not testing the exact text
preferable. The actually changed code is tested frequent enough in the
test_builtin test as it is (120 runs for each of ints and longs.)
PyTypeObject structures, I had to make prototypes for the functions, and
move the structure definition ahead of the functions. I'd dearly like a better
way to do this - to change this would make for a massive set of changes to
the codebase.
There's still some warnings - this is purely to get rid of errors first.
to protect against actual uninitialized usage.
Objects/longobject.c: In function ‘PyLong_AsDouble’:
Objects/longobject.c:655: warning: ‘e’ may be used uninitialized in this function
Objects/longobject.c: In function ‘long_true_divide’:
Objects/longobject.c:2263: warning: ‘aexp’ may be used uninitialized in this function
Objects/longobject.c:2263: warning: ‘bexp’ may be used uninitialized in this function
In C++, it's an error to pass a string literal to a char* function
without a const_cast(). Rather than require every C++ extension
module to put a cast around string literals, fix the API to state the
const-ness.
I focused on parts of the API where people usually pass literals:
PyArg_ParseTuple() and friends, Py_BuildValue(), PyMethodDef, the type
slots, etc. Predictably, there were a large set of functions that
needed to be fixed as a result of these changes. The most pervasive
change was to make the keyword args list passed to
PyArg_ParseTupleAndKewords() to be a const char *kwlist[].
One cast was required as a result of the changes: A type object
mallocs the memory for its tp_doc slot and later frees it.
PyTypeObject says that tp_doc is const char *; but if the type was
created by type_new(), we know it is safe to cast to char *.
In addition, long_pow() skipped a necessary (albeit extremely unlikely
to trigger) error check when converting an int modulus to long.
Alas, I was unable to write a test case that crashed due to either
cause.
Bugfix candidate.