There is more to be done here in terms of accepting RFC invalid
input that some mailers accept, but this covers the valid
RFC places where encoded words can occur in structured headers.
The problem was I was only checking for decimal digits after the third '?',
not for *hex* digits :(.
This changeset also fixes a couple of comment typos, deletes an unused
function relating to encoded word parsing, and removed an invalid
'if' test from the folding function that was revealed by the tests
written to validate this issue.
There were no tests for the encoders module. encode_base64 worked
because it is the default and so got tested implicitly elsewhere, and
we use encode_7or8bit internally, so that worked, too. I previously
fixed encode_noop, so this fix means that everythign in the encoders
module now works, hopefully correctly. Also added an explicit test
for encode_base64.
The new _has_surrogates code was suggested by Serhiy Storchaka. See
the issue for timings, but it is far faster than any other alternative,
and also removes the load time that we previously incurred from compiling
the complex regex this replaces.
Previously the parts of the message retained whatever linesep they had on
read, which means if the messages weren't read in univeral newline mode, the
line endings could well be inconsistent. In general sending it via smtplib
would result in them getting fixed, but it is better to generate them
correctly to begin with. Also, the new send_message method of smtplib does
not do the fixup, so that method is producing rfc-invalid output without this
fix.
Previously the parts of the message retained whatever linesep they had on
read, which means if the messages weren't read in univeral newline mode, the
line endings could well be inconsistent. In general sending it via smtplib
would result in them getting fixed, but it is better to generate them
correctly to begin with. Also, the new send_message method of smtplib does
not do the fixup, so that method is producing rfc-invalid output without this
fix.
Previously the parts of the message retained whatever linesep they had on
read, which means if the messages weren't read in univeral newline mode, the
line endings could well be inconsistent. In general sending it via smtplib
would result in them getting fixed, but it is better to generate them
correctly to begin with. Also, the new send_message method of smtplib does
not do the fixup, so that method is producing rfc-invalid output without this
fix.
This code passes all the same tests that the existing RFC mime header
parser passes, plus a bunch of additional ones.
There are a couple of commented out tests where there are issues with the
folding. The folding doesn't normally get invoked for headers parsed from
source, and the cases are marginal anyway (headers with invalid binary data)
so I'm not worried about them, but will fix them after the beta.
There are things that can be done to make this API even more convenient, but I
think this is a solid foundation worth having. And the parser is a full RFC
parser, so it handles cases that the current parser doesn't. (There are also
probably cases where it fails when the current parser doesn't, but I haven't
found them yet ;)
Oh, yeah, and there are some really ugly bits in the parser for handling some
'postel' cases that are unfortunately common.
I hope/plan to to eventually refactor a lot of the code in the parser which
should reduce the line count...but there is no escaping the fact that the
error recovery is welter of special cases.
The behavior of MessageDefect is legacy behavior. The chances anyone is
actually using the undocumented 'line' attribute is low, but it costs
little to retain backward compatibility. Although one of the costs is
having to restore normal exception behavior in HeaderDefect. On the
other hand, I'll probably add some specialized behavior there later.
This is a behavior change: before this leading and trailing spaces were
stripped from ASCII parts, now they are preserved. Without this fix we didn't
parse the examples in the RFC correctly, so I think breaking backward
compatibility here is justified.
Patch by Ralf Schlatterbeck.
This feature was supposed to be part of the initial email6 checkin, but it got
lost in my big refactoring.
In this patch I'm not providing an easy way to turn off the errors, but they
only happen when a header is added programmatically, and it is almost never
the right thing to do to allow the duplicate to be added. An application that
needs to add duplicates of unique headers can create a policy subclass to
allow it.
This commit also restores the news item for 167256 that it looks like
Terry inadvertently deleted. (Either that, or I don't understand
now merging works...which is equally possible.)
Which also means that it is now producing *something* for any base64
payload, which is what leads to the couple of older test changes in
test_email. This is a slightly backward incompatible behavior change,
but the new behavior is so much more useful than the old (you can now
*reliably* detect errors, and any program that was detecting errors by
sniffing for a base64 return from get_payload(decode=True) and then doing
its own error-recovery decode will just get the error-recovery decode
right away). So this seems to me to be worth the small risk inherent
in this behavior change.
This patch also refactors the defect tests into a separate test file,
since they are no longer just parser tests.
This patch also deprecates the MalformedHeaderDefect. My best guess is that
this defect was rendered obsolete by a refactoring of the parser, and the
corresponding defect for the new parser (which this patch introduces) was
overlooked.
When I made the checkin of the provisional email policy, I knew that
Address and Group needed to be made accessible from somewhere. The more
I looked at it, though, the more it became clear that since this is a
provisional API anyway, there's no good reason to hide headerregistry as
a private API. It was designed to ultimately be part of the public API,
and so it should be part of the provisional API.
This patch fully documents the headerregistry API, and deletes the
abbreviated version of those docs I had added to the provisional policy
docs.
Although '<>' is invalid according to RFC 5322, SMTP uses it for various
things, and it sometimes ends up in email headers. This patch changes
get_angle_addr to recognize it and just register a Defect instead of raising a
parsing error.
Without this function people would be tempted to use the other date functions
in email.utils to compute an aware localtime, and those functions are not as
good for that purpose as this code. The code is Alexander Belopolsy's from
his proposed patch for issue 9527, with a fix (and additional tests) by Brian
K. Jones.
When the new policies are used (and only when the new policies are explicitly
used) headers turn into objects that have attributes based on their parsed
values, and can be set using objects that encapsulate the values, as well as
set directly from unicode strings. The folding algorithm then takes care of
encoding unicode where needed, and folding according to the highest level
syntactic objects.
With this patch only date and time headers are parsed as anything other than
unstructured, but that is all the helper methods in the existing API handle.
I do plan to add more parsers, and complete the set specified in the RFC
before the package becomes stable.
This patch primarily does two things: (1) it adds some internal-interface
methods to Policy that allow for Policy to control the parsing and folding of
headers in such a way that we can construct a backward compatibility policy
that is 100% compatible with the 3.2 API, while allowing a new policy to
implement the email6 API. (2) it adds that backward compatibility policy and
refactors the test suite so that the only differences between the 3.2
test_email.py file and the 3.3 test_email.py file is some small changes in
test framework and the addition of tests for bugs fixed that apply to the 3.2
API.
There are some additional teaks, such as moving just the code needed for the
compatibility policy into _policybase, so that the library code can import
only _policybase. That way the new code that will be added for email6
will only get imported when a non-compatibility policy is imported.
Éric pointed out that given that the default was documented as None, someone
would reasonably pass that to get the default behavior. In fixing the code to
use None, I noticed that the change to _charset was being done after it had
already been passed to MIMENonMultipart. The change to the test verifies that
the order is now correct.
Previously it would just accept the unicode, which would wind up as unicode in
the transfer-encoded message object, which is just wrong.
Patch by Jeff Knupp.
In Python2, if a unicode string was assigned as the value of a header,
email would automatically CTE encode it using the UTF8 charset.
This capability was lost in the Python3 translation, and this patch
restores it.
Patch by Ali Ikinci, assisted by R. David Murray.
I also added a fix for the mailbox test that was depending (with a comment
that it was a bad idea to so depend) on non-ASCII causing message_from_string
to raise an error. It now uses support.patch to induce an error during
message serialization.
In Python2, if a unicode string was assigned as the value of a header,
email would automatically CTE encode it using the UTF8 charset.
This capability was lost in the Python3 translation, and this patch
restores it.
Patch by Ali Ikinci, assisted by R. David Murray.
I also added a fix for the mailbox test that was depending (with a comment
that it was a bad idea to so depend) on non-ASCII causing message_from_string
to raise an error. It now uses support.patch to induce an error during
message serialization.
Analogous to the decode_header fix, this fix makes Header.append and
make_header correctly handle the unknown-8bit charset introduced by email5.1,
when the input to them is binary strings. Previous to this fix the
make_header(decode_header(x)) == x invariant was broken in the face of the
unknown-8bit charset.
This new interface will also allow for future planned enhancements
in control over the parser/generator without requiring any additional
complexity in the parser/generator API.
Patch reviewed by Éric Araujo and Barry Warsaw.
Why I consider this a bug rather than an API change: the API change was
to Message, which didn't used to return Headers unless you added them
yourself. Now it does (for 8bit binary header input), so decode_header
needs to be able to handle them.
The fix is to charset.py, which was not doing the encoding to the
correct output character set when doing a body_encode for either
the shift-jis or euc-jp charsets. There's also a fix for handling
a bytes input in encoders.py.
Patch by Michael Henry, comment changes by me.
When a header was long enough to need to be split across lines, the
input charset name was used instead of the output charset name in
the encoded words. This make a difference only for the two charsets
above.
svn+ssh://pythondev@svn.python.org/python/branches/py3k
........
r87136 | r.david.murray | 2010-12-08 17:53:00 -0500 (Wed, 08 Dec 2010) | 6 lines
Have script_helper._assert_python strip refcount strings from stderr.
This makes the output of the function and those that depend on it
independent of whether or not they are being run under a debug
build.
........
r87221 | r.david.murray | 2010-12-13 19:55:46 -0500 (Mon, 13 Dec 2010) | 4 lines
#10699: fix docstring for tzset: it does not take a parameter
Thanks to Garrett Cooper for the fix.
........
r87256 | r.david.murray | 2010-12-14 21:19:14 -0500 (Tue, 14 Dec 2010) | 2 lines
#10705: document what the values of debuglevel are and mean.
........
r87337 | r.david.murray | 2010-12-17 11:11:40 -0500 (Fri, 17 Dec 2010) | 2 lines
#10559: provide instructions for accessing sys.argv when first mentioned.
........
r87338 | r.david.murray | 2010-12-17 11:29:07 -0500 (Fri, 17 Dec 2010) | 2 lines
#10454: clarify the compileall docs and help messages.
[compileall.py changes not backported.]
........
r87571 | r.david.murray | 2010-12-29 14:06:48 -0500 (Wed, 29 Dec 2010) | 2 lines
Fix same typo in docs.
........
r87839 | r.david.murray | 2011-01-07 16:57:25 -0500 (Fri, 07 Jan 2011) | 9 lines
Fix formatting of values with embedded newlines when rfc2047 encoding
Before this patch if a value being encoded had an embedded newline,
the line following the newline would have no leading whitespace,
and the whitespace it did have was encoded into the word. Now
the existing whitespace gets turned into a blank, the way it does
in other header reformatting, and the _continuation_ws gets added
at the beginning of the encoded line.
........
r88164 | r.david.murray | 2011-01-24 14:34:58 -0500 (Mon, 24 Jan 2011) | 12 lines
#10960: fix 'stat' links, link to lstat from stat, general tidy of stat doc.
Original patch by Michal Nowikowski, with some additions and wording
fixes by me.
I changed the wording from 'Performs a stat system call' to 'Performs
the equivalent of a stat system call', since on Windows there are no
stat/lstat system calls involved. I also extended Michal's breakout
of the attributes into a list to the other paragraphs, and rearranged
the order of the paragraphs in the 'stat' docs to make it flow
better and put it in what I think is a more logical/useful order.
........
svn+ssh://pythondev@svn.python.org/python/branches/py3k
........
r87873 | r.david.murray | 2011-01-08 21:35:24 -0500 (Sat, 08 Jan 2011) | 12 lines
#5871: protect against header injection attacks.
This makes Header.encode throw a HeaderParseError if it winds up
formatting a header such that a continuation line has no leading
whitespace and looks like a header. Since Header accepts values
containing newlines and preserves them (and this is by design), without
this fix any program that took user input (say, a subject in a web form)
and passed it to the email package as a header was vulnerable to header
injection attacks. (As far as we know this has never been exploited.)
Thanks to Jakub Wilk for reporting this vulnerability.
........
This makes Header.encode throw a HeaderParseError if it winds up
formatting a header such that a continuation line has no leading
whitespace and looks like a header. Since Header accepts values
containing newlines and preserves them (and this is by design), without
this fix any program that took user input (say, a subject in a web form)
and passed it to the email package as a header was vulnerable to header
injection attacks. (As far as we know this has never been exploited.)
Thanks to Jakub Wilk for reporting this vulnerability.
This applies only when generating strings from non-RFC compliant binary
input; it makes the existing recoding behavior more consistent (ie:
now no data is lost when recoding).
Before this patch if a value being encoded had an embedded newline,
the line following the newline would have no leading whitespace,
and the whitespace it did have was encoded into the word. Now
the existing whitespace gets turned into a blank, the way it does
in other header reformatting, and the _continuation_ws gets added
at the beginning of the encoded line.
svn+ssh://pythondev@svn.python.org/python/branches/py3k
........
r87750 | r.david.murray | 2011-01-04 20:39:32 -0500 (Tue, 04 Jan 2011) | 5 lines
#10790: make append work when output codec is different from input codec
There's still a bug here (the encode call shouldn't use the 'errors'
paramter), but I'll fix that later.
........
svn+ssh://pythondev@svn.python.org/python/branches/py3k
........
r87567 | r.david.murray | 2010-12-29 11:57:24 -0500 (Wed, 29 Dec 2010) | 2 lines
Fix a comment typo and update another comment to match Python3 reality
........
The RFC is bit hard to understand on this point, but the examples
clearly show that parameter values that are encoded according
to its charset/language rules don't have surrounding quotes, and
the ABNF does not allow for quotes. So when we produce such
encoded values, we no longer add quotes.
svn+ssh://pythondev@svn.python.org/python/branches/py3k
........
r87415 | r.david.murray | 2010-12-21 13:07:59 -0500 (Tue, 21 Dec 2010) | 4 lines
Fix the change made for issue 1243654.
Surprisingly, it turns out there was no test that exercised this code path.
........
Such addresses are not RFC compliant except under the 'obsolete syntax'
rules, but before this fix the whitespace was dropped from the input,
concatenating the pieces. That breaks one of the principles of the
email package, that of preserving the input as much as possible.
It also denies the application program the opportunity to apply its
own heuristics to interpretation of such non-compliant addresses.
It is possible users of the email package were depending on the local
part always being a single token, so this fix will not be backported.
svn+ssh://pythondev@svn.python.org/python/branches/py3k
........
r87217 | r.david.murray | 2010-12-13 18:51:19 -0500 (Mon, 13 Dec 2010) | 5 lines
#1078919: make add_header automatically do RFC2231 encoding when needed.
Also document the use of three-tuples if control of the charset
and language is desired.
........
svn+ssh://pythondev@svn.python.org/python/branches/py3k
........
r87191 | r.david.murray | 2010-12-12 15:06:19 -0500 (Sun, 12 Dec 2010) | 6 lines
#243654: only create a new MIME boundary if we don't already have one.
The rearranged code should do exactly what the old code did, but
the new code avoids a potentially costly re computation in the case
where a boundary already exists.
........
The rearranged code should do exactly what the old code did, but
the new code avoids a potentially costly re computation in the case
where a boundary already exists.
The tests that were failing on (some) windows machines, where the
msg_XX.txt files used native \r\n lineseps are now also run on machines
that use \n natively, and conversely the \n tests are run on Windows.
The failing tests revealed one place where linesep needed to be added
to a flatten call in generator. There was also another that the tests
didn't catch, so I added a test for that case as well.
The work on this is not 100% complete, but everything is present to
allow real-world testing of the code. The only remaining major todo
item is to (hopefully!) enhance the handling of non-ASCII bytes in headers
converted to unicode by RFC2047 encoding them rather than replacing them with
'?'s.
svn+ssh://pythondev@svn.python.org/python/branches/py3k
........
r85179 | r.david.murray | 2010-10-02 11:58:26 -0400 (Sat, 02 Oct 2010) | 6 lines
#1050268: make parseaddr 'quote' the contents of quoted strings in addresses.
Also made the doc string for email._parseaddr's 'quote' function more
accurate; I'd love to make the function match the old docstring instead,
but other code uses it according the existing semantics.
........
Also made the doc string for email._parseaddr's 'quote' function more
accurate; I'd love to make the function match the old docstring instead,
but other code uses it according the existing semantics.
svn+ssh://pythondev@svn.python.org/python/branches/py3k
........
r85142 | r.david.murray | 2010-10-01 11:40:20 -0400 (Fri, 01 Oct 2010) | 5 lines
#10004: in Q encoded word ignore '=xx' when xx is not valid hex.
Bug report and fix by Thomas Guettler.
........
svn+ssh://pythondev@svn.python.org/python/branches/py3k
........
r84310 | r.david.murray | 2010-08-24 20:45:55 -0400 (Tue, 24 Aug 2010) | 8 lines
#1194222: make parsedate always return RFC2822 four character years.
Two character years are now converted to four character years using
the Posix standard rule (<68 == 2000, >=68==1900). This makes the
parsed date RFC2822 compliant even if the input is not.
Patch and test by Jeffrey Finkelstein.
........
Two character years are now converted to four character years using
the Posix standard rule (<68 == 2000, >=68==1900). This makes the
parsed date RFC2822 compliant even if the input is not.
Patch and test by Jeffrey Finkelstein.
svn+ssh://pythondev@svn.python.org/python/branches/py3k
........
r83690 | r.david.murray | 2010-08-03 18:14:10 -0400 (Tue, 03 Aug 2010) | 10 lines
#3196: if needed pad a short base64 encoded word before trying to decode.
The RFCs encourage following Postel's law: be liberal in what you accept.
So if someone forgot to pad the base64 encoded word payload to an
even four bytes, we add the padding before handing it to base64mime.decode.
Previously, missing padding resulted in a HeaderParseError.
Patch by Jason Williams.
........
The RFCs encourage following Postel's law: be liberal in what you accept.
So if someone forgot to pad the base64 encoded word payload to an
even four bytes, we add the padding before handing it to base64mime.decode.
Previously, missing padding resulted in a HeaderParseError.
Patch by Jason Williams.
svn+ssh://pythondev@svn.python.org/python/branches/py3k
........
r82922 | r.david.murray | 2010-07-16 21:19:57 -0400 (Fri, 16 Jul 2010) | 4 lines
#1555570: correctly handle a \r\n that is split by the read buffer.
Patch and test by Tony Nelson.
........
svn+ssh://pythondev@svn.python.org/python/branches/py3k
................
r82011 | r.david.murray | 2010-06-15 22:19:40 -0400 (Tue, 15 Jun 2010) | 17 lines
Merged revisions 81675 via svnmerge from
svn+ssh://pythondev@svn.python.org/python/trunk
........
r81675 | r.david.murray | 2010-06-03 11:43:20 -0400 (Thu, 03 Jun 2010) | 10 lines
#5610: use \Z not $ so we don't eat extra chars when body part ends with \r\n.
If a body part ended with \r\n, feedparser, using '$' to terminate its
search for the newline, would match on the \r\n, and think that it needed
to strip two characters in order to account for the line end before the
boundary. That made it chop one too many characters off the end of
the body part. Using \Z makes the match correct.
Patch and test by Tony Nelson.
........
................
svn+ssh://pythondev@svn.python.org/python/trunk
........
r81675 | r.david.murray | 2010-06-03 11:43:20 -0400 (Thu, 03 Jun 2010) | 10 lines
#5610: use \Z not $ so we don't eat extra chars when body part ends with \r\n.
If a body part ended with \r\n, feedparser, using '$' to terminate its
search for the newline, would match on the \r\n, and think that it needed
to strip two characters in order to account for the line end before the
boundary. That made it chop one too many characters off the end of
the body part. Using \Z makes the match correct.
Patch and test by Tony Nelson.
........
svn+ssh://pythondev@svn.python.org/python/branches/py3k
........
r81685 | r.david.murray | 2010-06-04 12:11:08 -0400 (Fri, 04 Jun 2010) | 4 lines
#4768: store base64 encoded email body parts as text, not binary.
Patch and tests by Forest Bond.
........
svn+ssh://pythondev@svn.python.org/python/branches/py3k
................
r81660 | r.david.murray | 2010-06-02 21:58:28 -0400 (Wed, 02 Jun 2010) | 25 lines
Fix Charset.body_encode to encode to output_charset before calling base64mime.
This means that what gets encoded in base64 is the encoded version of the
unicode payload. This bug was revealed by a forward port of the tests from
Issue 1368247, but the fix was completely different.
Note that the merge is only of the tests, the doc changes were inappropriate
since email5 expects unicode, not bytes. I'm also not convinced that
quopri works correctly in email5, but that's a different issue.
Merged revisions 81658 via svnmerge from
svn+ssh://pythondev@svn.python.org/python/trunk
........
r81658 | r.david.murray | 2010-06-02 18:03:15 -0400 (Wed, 02 Jun 2010) | 9 lines
#1368247: make set_charset/MIMEText automatically encode unicode _payload.
Fixes (mysterious, to the end user) UnicodeErrors when using utf-8 as
the charset and unicode as the _text argument. Also makes the way in
which unicode gets encoded to quoted printable for other charsets more
sane (it only worked by accident previously). The _payload now is encoded
to the charset.output_charset if it is unicode.
........
................
This means that what gets encoded in base64 is the encoded version of the
unicode payload. This bug was revealed by a forward port of the tests from
Issue 1368247, but the fix was completely different.
Note that the merge is only of the tests, the doc changes were inappropriate
since email5 expects unicode, not bytes. I'm also not convinced that
quopri works correctly in email5, but that's a different issue.
Merged revisions 81658 via svnmerge from
svn+ssh://pythondev@svn.python.org/python/trunk
........
r81658 | r.david.murray | 2010-06-02 18:03:15 -0400 (Wed, 02 Jun 2010) | 9 lines
#1368247: make set_charset/MIMEText automatically encode unicode _payload.
Fixes (mysterious, to the end user) UnicodeErrors when using utf-8 as
the charset and unicode as the _text argument. Also makes the way in
which unicode gets encoded to quoted printable for other charsets more
sane (it only worked by accident previously). The _payload now is encoded
to the charset.output_charset if it is unicode.
........
svn+ssh://pythondev@svn.python.org/python/branches/py3k
........
r80795 | barry.warsaw | 2010-05-05 18:18:31 +0200 (Mi, 05 Mai 2010) | 5 lines
Bug 7755: audiotest.au is arguably copyrighted material, but definitely makes
Debian unhappy. The actual contents of the audio clip are unimportant, so
replace it with something that we know is okay. Guido likes woodpeckers.
........
svn+ssh://pythondev@svn.python.org/python/branches/py3k
................
r79996 | r.david.murray | 2010-04-12 10:48:58 -0400 (Mon, 12 Apr 2010) | 15 lines
Merged revisions 79994 via svnmerge from
svn+ssh://pythondev@svn.python.org/python/trunk
........
r79994 | r.david.murray | 2010-04-12 10:26:06 -0400 (Mon, 12 Apr 2010) | 9 lines
Issue #7472: ISO-2022 charsets now consistently use 7bit CTE.
Fixed a typo in the email.encoders module so that messages output using
an ISO-2022 character set will use a content-transfer-encoding of
7bit consistently. Previously if the input data had any eight bit
characters the output data would get marked as 8bit even though it
was actually 7bit.
........
................
r80855 | r.david.murray | 2010-05-05 21:41:14 -0400 (Wed, 05 May 2010) | 24 lines
Merged revisions 80800 via svnmerge from
svn+ssh://pythondev@svn.python.org/python/trunk
It turns out that email5 (py3k), because it is using unicode for the
payload, doesn't do the encoding to the output character set until later
in the process. Specifically, charset.body_encode no longer does the
input-to-output charset conversion. So the if test in the exception
clause in encoders.encode_7or8bit really is needed in email5.
So, this merge only merges the test, not the removal of the 'if'.
........
r80800 | r.david.murray | 2010-05-05 13:31:03 -0400 (Wed, 05 May 2010) | 9 lines
Issue #7472: remove unused code from email.encoders.encode_7or8bit.
Yukihiro Nakadaira noticed a typo in encode_7or8bit that was trying
to special case iso-2022 codecs. It turns out that the code in
question is never used, because whereas it was designed to trigger
if the payload encoding was eight bit but its output encoding was
7 bit, in practice the payload is always converted to the 7bit
encoding before encode_7or8bit is called. Patch by Shawat Anand.
........
................
svn+ssh://pythondev@svn.python.org/python/trunk
It turns out that email5 (py3k), because it is using unicode for the
payload, doesn't do the encoding to the output character set until later
in the process. Specifically, charset.body_encode no longer does the
input-to-output charset conversion. So the if test in the exception
clause in encoders.encode_7or8bit really is needed in email5.
So, this merge only merges the test, not the removal of the 'if'.
........
r80800 | r.david.murray | 2010-05-05 13:31:03 -0400 (Wed, 05 May 2010) | 9 lines
Issue #7472: remove unused code from email.encoders.encode_7or8bit.
Yukihiro Nakadaira noticed a typo in encode_7or8bit that was trying
to special case iso-2022 codecs. It turns out that the code in
question is never used, because whereas it was designed to trigger
if the payload encoding was eight bit but its output encoding was
7 bit, in practice the payload is always converted to the 7bit
encoding before encode_7or8bit is called. Patch by Shawat Anand.
........
svn+ssh://pythondev@svn.python.org/python/trunk
........
r79994 | r.david.murray | 2010-04-12 10:26:06 -0400 (Mon, 12 Apr 2010) | 9 lines
Issue #7472: ISO-2022 charsets now consistently use 7bit CTE.
Fixed a typo in the email.encoders module so that messages output using
an ISO-2022 character set will use a content-transfer-encoding of
7bit consistently. Previously if the input data had any eight bit
characters the output data would get marked as 8bit even though it
was actually 7bit.
........
svn+ssh://pythondev@svn.python.org/python/trunk
........
r78018 | georg.brandl | 2010-02-06 11:08:21 +0100 (Sa, 06 Feb 2010) | 1 line
#7864: make deprecation notices a bit clearer.
........
r78035 | georg.brandl | 2010-02-06 23:44:17 +0100 (Sa, 06 Feb 2010) | 1 line
Fix duplicate import.
........
r78036 | georg.brandl | 2010-02-06 23:49:47 +0100 (Sa, 06 Feb 2010) | 1 line
Remove unused import.
........
r78037 | georg.brandl | 2010-02-06 23:59:15 +0100 (Sa, 06 Feb 2010) | 1 line
No need to assign the results of expressions used only for side effects.
........
r78038 | georg.brandl | 2010-02-07 00:02:29 +0100 (So, 07 Feb 2010) | 1 line
Add a missing import.
........
r78039 | georg.brandl | 2010-02-07 00:06:24 +0100 (So, 07 Feb 2010) | 1 line
Add missing imports.
........
r78040 | georg.brandl | 2010-02-07 00:08:00 +0100 (So, 07 Feb 2010) | 1 line
Fix a few UnboundLocalErrors in test_long.
........
r78042 | georg.brandl | 2010-02-07 00:12:12 +0100 (So, 07 Feb 2010) | 1 line
Add missing import.
........
r78043 | georg.brandl | 2010-02-07 00:12:19 +0100 (So, 07 Feb 2010) | 1 line
Remove duplicate test method.
........
r78046 | georg.brandl | 2010-02-07 00:18:00 +0100 (So, 07 Feb 2010) | 1 line
Fix various missing import/unbound name errors.
........
r78048 | georg.brandl | 2010-02-07 00:23:45 +0100 (So, 07 Feb 2010) | 1 line
We heard you like test failures so we put unbound locals in your test so that you can fail while you fail.
........
r78049 | georg.brandl | 2010-02-07 00:33:33 +0100 (So, 07 Feb 2010) | 1 line
Fix import/access for some identifiers. _TestSharedCTypes does not seem to be executed?
........
r78050 | georg.brandl | 2010-02-07 00:34:10 +0100 (So, 07 Feb 2010) | 1 line
Fix more unbound locals in code paths that do not seem to be used.
........
r78051 | georg.brandl | 2010-02-07 00:53:52 +0100 (So, 07 Feb 2010) | 1 line
Add missing import when running these tests standalone.
........
r78052 | georg.brandl | 2010-02-07 00:54:04 +0100 (So, 07 Feb 2010) | 1 line
Add missing import when running these tests standalone.
........
r78054 | georg.brandl | 2010-02-07 00:58:25 +0100 (So, 07 Feb 2010) | 1 line
Add missing import.
........
r78059 | georg.brandl | 2010-02-07 12:34:15 +0100 (So, 07 Feb 2010) | 1 line
Use "regexp" consistently.
........
r78075 | georg.brandl | 2010-02-07 13:16:12 +0100 (So, 07 Feb 2010) | 1 line
Fix another duplicated test method.
........
r78076 | georg.brandl | 2010-02-07 13:19:43 +0100 (So, 07 Feb 2010) | 1 line
Fix wrong usage of "except X, Y:".
........
r78077 | georg.brandl | 2010-02-07 13:25:50 +0100 (So, 07 Feb 2010) | 1 line
Fix two redefined test methods.
........
r78078 | georg.brandl | 2010-02-07 13:27:06 +0100 (So, 07 Feb 2010) | 1 line
Fix a redefined test method.
........
r78079 | georg.brandl | 2010-02-07 13:34:26 +0100 (So, 07 Feb 2010) | 1 line
Add a minimal test for fnmatchcase().
........
r78080 | georg.brandl | 2010-02-07 13:55:12 +0100 (So, 07 Feb 2010) | 1 line
Remove duplicate test method.
........
the trunk patch, and removes the last trace of bdecode, which was
a commented out call in message.py.
Merged revisions 78778 via svnmerge from
svn+ssh://pythondev@svn.python.org/python/trunk
........
r78778 | r.david.murray | 2010-03-07 21:04:06 -0500 (Sun, 07 Mar 2010) | 9 lines
Issue #7143: get_payload used to strip any trailing newline from a
base64 transfer-encoded payload *after* decoding it; it no longer does.
email had a special method in utils, _bdecode, specifically to do this,
so it must have served a purpose at some point, yet it is clearly wrong
per RFC. Fixed with Barry's approval, but no backport. Email package
minor version number is bumped, now version 4.0.1.
Patch by Joaquin Cuenca Abela.
........
svn+ssh://pythondev@svn.python.org/python/branches/py3k
................
r78276 | r.david.murray | 2010-02-20 23:39:40 -0500 (Sat, 20 Feb 2010) | 16 lines
Merged revisions 78274 via svnmerge from
svn+ssh://pythondev@svn.python.org/python/trunk
........
r78274 | r.david.murray | 2010-02-20 23:23:00 -0500 (Sat, 20 Feb 2010) | 9 lines
Issue 7970: When email.Parser.Parser parses a MIME message of type
message/rfc822 it turns it into an object whose body consists of
a list containing a single Message object. HeaderParser, on the
other hand, just copies the body as a string. Generator.flatten
has a special handler for the message mime type that expected the
body to be the one item list. This fails if the message was parsed
by HeaderParser. So we now check to see if the body is a string
first, and if so just we just emit it.
........
................
svn+ssh://pythondev@svn.python.org/python/trunk
........
r78274 | r.david.murray | 2010-02-20 23:23:00 -0500 (Sat, 20 Feb 2010) | 9 lines
Issue 7970: When email.Parser.Parser parses a MIME message of type
message/rfc822 it turns it into an object whose body consists of
a list containing a single Message object. HeaderParser, on the
other hand, just copies the body as a string. Generator.flatten
has a special handler for the message mime type that expected the
body to be the one item list. This fails if the message was parsed
by HeaderParser. So we now check to see if the body is a string
first, and if so just we just emit it.
........
svn+ssh://pythondev@svn.python.org/python/branches/py3k
................
r77542 | r.david.murray | 2010-01-16 13:30:03 -0500 (Sat, 16 Jan 2010) | 18 lines
Merged revisions 77517,77525 via svnmerge from
svn+ssh://pythondev@svn.python.org/python/trunk
Merge adds an additional test for as_string with a maxheaderlen specified.
........
r77517 | r.david.murray | 2010-01-16 00:15:17 -0500 (Sat, 16 Jan 2010) | 6 lines
Issue #1670765: Prevent email.generator.Generator from re-wrapping
headers in multipart/signed MIME parts, which fixes one of the sources of
invalid modifications to such parts by Generator. Patch and tests by
Martin von Gagern.
........
r77525 | r.david.murray | 2010-01-16 11:08:32 -0500 (Sat, 16 Jan 2010) | 2 lines
Fix issue number in comment.
........
................
svn+ssh://pythondev@svn.python.org/python/trunk
Merge adds an additional test for as_string with a maxheaderlen specified.
........
r77517 | r.david.murray | 2010-01-16 00:15:17 -0500 (Sat, 16 Jan 2010) | 6 lines
Issue #1670765: Prevent email.generator.Generator from re-wrapping
headers in multipart/signed MIME parts, which fixes one of the sources of
invalid modifications to such parts by Generator. Patch and tests by
Martin von Gagern.
........
r77525 | r.david.murray | 2010-01-16 11:08:32 -0500 (Sat, 16 Jan 2010) | 2 lines
Fix issue number in comment.
........
svn+ssh://pythondev@svn.python.org/python/branches/py3k
................
r75307 | r.david.murray | 2009-10-09 20:13:32 -0400 (Fri, 09 Oct 2009) | 12 lines
Merged revisions 75301 via svnmerge from
svn+ssh://pythondev@svn.python.org/python/trunk
........
r75301 | r.david.murray | 2009-10-09 17:50:54 -0400 (Fri, 09 Oct 2009) | 5 lines
Issue #7082: When falling back to the MIME 'name' parameter, the
correct place to look for it is the Content-Type header.
Patch by Darren Worrall.
........
................
svn+ssh://pythondev@svn.python.org/python/trunk
........
r75301 | r.david.murray | 2009-10-09 17:50:54 -0400 (Fri, 09 Oct 2009) | 5 lines
Issue #7082: When falling back to the MIME 'name' parameter, the
correct place to look for it is the Content-Type header.
Patch by Darren Worrall.
........
svn+ssh://pythondev@svn.python.org/python/branches/py3k
................
r73623 | benjamin.peterson | 2009-06-28 12:22:03 -0500 (Sun, 28 Jun 2009) | 58 lines
Merged revisions 73004,73439,73496,73509,73529,73564,73576-73577,73595-73596,73605 via svnmerge from
svn+ssh://pythondev@svn.python.org/python/trunk
........
r73004 | jeffrey.yasskin | 2009-05-28 22:44:31 -0500 (Thu, 28 May 2009) | 5 lines
Fix nearly all compilation warnings under Apple gcc-4.0. Tested with OPT="-g
-Wall -Wstrict-prototypes -Werror" in both --with-pydebug mode and --without.
There's still a batch of non-prototype warnings in Xlib.h that I don't know how
to fix.
........
r73439 | benjamin.peterson | 2009-06-15 19:29:31 -0500 (Mon, 15 Jun 2009) | 1 line
don't mask encoding errors when decoding a string #6289
........
r73496 | vinay.sajip | 2009-06-21 12:37:27 -0500 (Sun, 21 Jun 2009) | 1 line
Issue #6314: logging.basicConfig() performs extra checks on the "level" argument.
........
r73509 | amaury.forgeotdarc | 2009-06-22 14:33:48 -0500 (Mon, 22 Jun 2009) | 2 lines
#4490 Fix sample code run by "python -m xml.sax.xmlreader"
........
r73529 | r.david.murray | 2009-06-23 13:02:46 -0500 (Tue, 23 Jun 2009) | 4 lines
Fix issue 5230 by having pydoc's safeimport check to see if the import
error was thrown from itself in order to decide if the module can't be
found. Thanks to Lucas Prado Melo for collaborating on the fix and tests.
........
r73564 | amaury.forgeotdarc | 2009-06-25 17:29:29 -0500 (Thu, 25 Jun 2009) | 6 lines
#2016 Fix a crash in function call when the **kwargs dictionary is mutated
during the function call setup.
This even gives a slight speedup, probably because tuple allocation
is faster than PyMem_NEW.
........
r73576 | benjamin.peterson | 2009-06-26 18:37:06 -0500 (Fri, 26 Jun 2009) | 1 line
document is_declared_global()
........
r73577 | benjamin.peterson | 2009-06-27 09:16:23 -0500 (Sat, 27 Jun 2009) | 1 line
link to extensive generator docs in the reference manual
........
r73595 | ezio.melotti | 2009-06-27 18:45:39 -0500 (Sat, 27 Jun 2009) | 1 line
stmt and setup can contain multiple statements, see #5896
........
r73596 | ezio.melotti | 2009-06-27 19:07:45 -0500 (Sat, 27 Jun 2009) | 1 line
Fixed a wrong apostrophe
........
r73605 | georg.brandl | 2009-06-28 07:10:18 -0500 (Sun, 28 Jun 2009) | 1 line
Remove stray pychecker directive.
........
................
r73624 | benjamin.peterson | 2009-06-28 12:32:20 -0500 (Sun, 28 Jun 2009) | 1 line
document BufferedIOBase.raw and TextIOBase.buffer
................
svn+ssh://pythondev@svn.python.org/python/trunk
........
r73004 | jeffrey.yasskin | 2009-05-28 22:44:31 -0500 (Thu, 28 May 2009) | 5 lines
Fix nearly all compilation warnings under Apple gcc-4.0. Tested with OPT="-g
-Wall -Wstrict-prototypes -Werror" in both --with-pydebug mode and --without.
There's still a batch of non-prototype warnings in Xlib.h that I don't know how
to fix.
........
r73439 | benjamin.peterson | 2009-06-15 19:29:31 -0500 (Mon, 15 Jun 2009) | 1 line
don't mask encoding errors when decoding a string #6289
........
r73496 | vinay.sajip | 2009-06-21 12:37:27 -0500 (Sun, 21 Jun 2009) | 1 line
Issue #6314: logging.basicConfig() performs extra checks on the "level" argument.
........
r73509 | amaury.forgeotdarc | 2009-06-22 14:33:48 -0500 (Mon, 22 Jun 2009) | 2 lines
#4490 Fix sample code run by "python -m xml.sax.xmlreader"
........
r73529 | r.david.murray | 2009-06-23 13:02:46 -0500 (Tue, 23 Jun 2009) | 4 lines
Fix issue 5230 by having pydoc's safeimport check to see if the import
error was thrown from itself in order to decide if the module can't be
found. Thanks to Lucas Prado Melo for collaborating on the fix and tests.
........
r73564 | amaury.forgeotdarc | 2009-06-25 17:29:29 -0500 (Thu, 25 Jun 2009) | 6 lines
#2016 Fix a crash in function call when the **kwargs dictionary is mutated
during the function call setup.
This even gives a slight speedup, probably because tuple allocation
is faster than PyMem_NEW.
........
r73576 | benjamin.peterson | 2009-06-26 18:37:06 -0500 (Fri, 26 Jun 2009) | 1 line
document is_declared_global()
........
r73577 | benjamin.peterson | 2009-06-27 09:16:23 -0500 (Sat, 27 Jun 2009) | 1 line
link to extensive generator docs in the reference manual
........
r73595 | ezio.melotti | 2009-06-27 18:45:39 -0500 (Sat, 27 Jun 2009) | 1 line
stmt and setup can contain multiple statements, see #5896
........
r73596 | ezio.melotti | 2009-06-27 19:07:45 -0500 (Sat, 27 Jun 2009) | 1 line
Fixed a wrong apostrophe
........
r73605 | georg.brandl | 2009-06-28 07:10:18 -0500 (Sun, 28 Jun 2009) | 1 line
Remove stray pychecker directive.
........
svn+ssh://pythondev@svn.python.org/python/trunk
........
r70554 | benjamin.peterson | 2009-03-23 16:25:15 -0500 (Mon, 23 Mar 2009) | 1 line
complain when there's no last exception
........
r70588 | benjamin.peterson | 2009-03-24 17:56:32 -0500 (Tue, 24 Mar 2009) | 1 line
fix newline issue in test summary
........
r70589 | benjamin.peterson | 2009-03-24 18:07:07 -0500 (Tue, 24 Mar 2009) | 1 line
another style nit
........
r70598 | benjamin.peterson | 2009-03-25 16:24:04 -0500 (Wed, 25 Mar 2009) | 1 line
add shorthands for expected failures and unexpected success
........
r70605 | benjamin.peterson | 2009-03-26 11:32:23 -0500 (Thu, 26 Mar 2009) | 1 line
remove uneeded function
........
r70611 | benjamin.peterson | 2009-03-26 13:35:37 -0500 (Thu, 26 Mar 2009) | 1 line
add much better tests for python version information parsing
........
r70612 | benjamin.peterson | 2009-03-26 13:55:48 -0500 (Thu, 26 Mar 2009) | 1 line
more and more implementations now support sys.subversion
........
r70613 | benjamin.peterson | 2009-03-26 13:58:30 -0500 (Thu, 26 Mar 2009) | 1 line
roll old test in with new one
........
r70614 | benjamin.peterson | 2009-03-26 14:09:21 -0500 (Thu, 26 Mar 2009) | 1 line
add support for PyPy
........
r70615 | benjamin.peterson | 2009-03-26 14:58:18 -0500 (Thu, 26 Mar 2009) | 5 lines
add some useful utilities for skipping tests with unittest's new skipping ability
most significantly apply a modified portion of the patch from #4242 with
patches for skipping implementation details
........
r70616 | benjamin.peterson | 2009-03-26 15:05:50 -0500 (Thu, 26 Mar 2009) | 1 line
rename TestCase.skip() to skipTest() because it causes annoying problems with trial #5571
........
r70617 | benjamin.peterson | 2009-03-26 15:17:27 -0500 (Thu, 26 Mar 2009) | 1 line
apply the second part of #4242's patch; classify all the implementation details in test_descr
........
r70618 | benjamin.peterson | 2009-03-26 15:48:25 -0500 (Thu, 26 Mar 2009) | 1 line
remove test_support.TestSkipped and just use unittest.SkipTest
........
r70619 | benjamin.peterson | 2009-03-26 15:49:40 -0500 (Thu, 26 Mar 2009) | 1 line
fix naming
........
r70620 | benjamin.peterson | 2009-03-26 16:10:30 -0500 (Thu, 26 Mar 2009) | 1 line
fix incorrect auto-translation of TestSkipped -> unittest.SkipTest
........
r70621 | benjamin.peterson | 2009-03-26 16:11:16 -0500 (Thu, 26 Mar 2009) | 1 line
must pass argument to get expected behavior ;)
........
r70623 | benjamin.peterson | 2009-03-26 16:30:10 -0500 (Thu, 26 Mar 2009) | 1 line
add missing import
........
r70624 | benjamin.peterson | 2009-03-26 16:30:54 -0500 (Thu, 26 Mar 2009) | 1 line
** is required here
........
r70626 | benjamin.peterson | 2009-03-26 16:40:29 -0500 (Thu, 26 Mar 2009) | 1 line
update email tests to use SkipTest
........
r70627 | benjamin.peterson | 2009-03-26 16:44:43 -0500 (Thu, 26 Mar 2009) | 1 line
fix another name
........
Code contributed by Matt Giuca. quote() now encodes the input
before quoting, unquote() decodes after unquoting. There are
new arguments to change the encoding and errors settings.
There are also new APIs to skip the encode/decode steps.
[un]quote_plus() are also affected.
It consists of code from urllib, urllib2, urlparse, and robotparser.
The old modules have all been removed. The new package has five
submodules: urllib.parse, urllib.request, urllib.response,
urllib.error, and urllib.robotparser. The urllib.request.urlopen()
function uses the url opener from urllib2.
Note that the unittests have not been renamed for the
beta, but they will be renamed in the future.
Joint work with Senthil Kumaran.
svn+ssh://pythondev@svn.python.org/python/trunk
........
r60990 | eric.smith | 2008-02-23 17:05:26 +0100 (Sat, 23 Feb 2008) | 1 line
Removed duplicate Py_CHARMASK define. It's already defined in Python.h.
........
r60991 | andrew.kuchling | 2008-02-23 17:23:05 +0100 (Sat, 23 Feb 2008) | 4 lines
#1330538: Improve comparison of xmlrpclib.DateTime and datetime instances.
Remove automatic handling of datetime.date and datetime.time.
This breaks backward compatibility, but python-dev discussion was strongly
against this automatic conversion; see the bug for a link.
........
r60994 | andrew.kuchling | 2008-02-23 17:39:43 +0100 (Sat, 23 Feb 2008) | 1 line
#835521: Add index entries for various pickle-protocol methods and attributes
........
r60995 | andrew.kuchling | 2008-02-23 18:10:46 +0100 (Sat, 23 Feb 2008) | 2 lines
#1433694: minidom's .normalize() failed to set .nextSibling for last element.
Fix by Malte Helmert
........
r61000 | christian.heimes | 2008-02-23 18:40:11 +0100 (Sat, 23 Feb 2008) | 1 line
Patch #2167 from calvin: Remove unused imports
........
r61001 | christian.heimes | 2008-02-23 18:42:31 +0100 (Sat, 23 Feb 2008) | 1 line
Patch #1957: syslogmodule: Release GIL when calling syslog(3)
........
r61002 | christian.heimes | 2008-02-23 18:52:07 +0100 (Sat, 23 Feb 2008) | 2 lines
Issue #2051 and patch from Alexander Belopolsky:
Permission for pyc and pyo files are inherited from the py file.
........
svn+ssh://pythondev@svn.python.org/python/trunk
........
r60054 | christian.heimes | 2008-01-18 20:12:56 +0100 (Fri, 18 Jan 2008) | 1 line
Silence Coverity false alerts with CIDs #172, #183, #184
........
r60057 | guido.van.rossum | 2008-01-18 21:56:30 +0100 (Fri, 18 Jan 2008) | 3 lines
Fix an edge case whereby the __del__() method of a classic class could
create a new weakref to the object.
........
r60058 | raymond.hettinger | 2008-01-18 22:14:58 +0100 (Fri, 18 Jan 2008) | 1 line
Better variable name in an example.
........
r60063 | guido.van.rossum | 2008-01-19 00:05:40 +0100 (Sat, 19 Jan 2008) | 3 lines
This got fixed for classic classes in r60057,
and backported to 2.5.2 in 60056.
........
r60068 | jeffrey.yasskin | 2008-01-19 10:56:06 +0100 (Sat, 19 Jan 2008) | 4 lines
Several tweaks: add construction from strings and .from_decimal(), change
__init__ to __new__ to enforce immutability, and remove "rational." from repr
and the parens from str.
........
r60069 | georg.brandl | 2008-01-19 11:11:27 +0100 (Sat, 19 Jan 2008) | 2 lines
Fix markup.
........
r60070 | georg.brandl | 2008-01-19 11:16:09 +0100 (Sat, 19 Jan 2008) | 3 lines
Amend curses docs by info how to write non-ascii characters.
Thanks to Jeroen Ruigrok van der Werven.
........
r60071 | georg.brandl | 2008-01-19 11:18:07 +0100 (Sat, 19 Jan 2008) | 2 lines
Indentation normalization.
........
r60073 | facundo.batista | 2008-01-19 13:32:27 +0100 (Sat, 19 Jan 2008) | 5 lines
Fix issue #1822: MIMEMultipart.is_multipart() behaves correctly for a
just-created (and empty) instance. Added tests for this. Thanks
Jonathan Share.
........
r60074 | andrew.kuchling | 2008-01-19 14:33:20 +0100 (Sat, 19 Jan 2008) | 1 line
Polish sentence
........
r60075 | christian.heimes | 2008-01-19 14:46:06 +0100 (Sat, 19 Jan 2008) | 1 line
Added unit test to verify that threading.local doesn't cause ref leaks. It seems that the thread local storage always keeps the storage of the last stopped thread alive. Can anybody comment on it, please?
........
r60076 | christian.heimes | 2008-01-19 16:06:09 +0100 (Sat, 19 Jan 2008) | 1 line
Update for threading.local test.
........
r60077 | andrew.kuchling | 2008-01-19 16:16:37 +0100 (Sat, 19 Jan 2008) | 1 line
Polish sentence
........
r60078 | georg.brandl | 2008-01-19 16:22:16 +0100 (Sat, 19 Jan 2008) | 2 lines
Fix typos.
........
I replaced sys.maxint with sys.maxsize in Lib/*.py. Does anybody see a problem with the change on Win 64bit platforms? Win 64's long is just 32bit but the sys.maxsize is now 2**63-1 on every 64bit platform.
Also added docs for sys.maxsize.
No detailed change log; just check out the change log for the py3k-pep3137
branch. The most obvious changes:
- str8 renamed to bytes (PyString at the C level);
- bytes renamed to buffer (PyBytes at the C level);
- PyString and PyUnicode are no longer compatible.
I.e. we now have an immutable bytes type and a mutable bytes type.
The behavior of PyString was modified quite a bit, to make it more
bytes-like. Some changes are still on the to-do list.
making it unicode with the default encoding. I'm not sure if this is
a problem in and of itself. However, the test seems to be testing
something different, so at least get that working. Need to revisit
the unicode problem.
line splitting examples don't split things the way they used to -- or should.
In these cases, change the test case and add an XXX.
The final failure was in Charset.body_encode() with euc-jp charset. These
return the original string unencoded, which isn't right. XXX and comment this
out for now; we'll fix it after a1.
Fix a couple of tests since .body_encode()'s arguments have changed. Also, I
think body_encode() should take a string not a byte array for consistency with
the rest of the api (but I'm not positive about this). In
quoprimime.body_encode(), body_check() must be passed an int.
Current status: 7F (no errors!)
R David Murray
Ezio Melotti
Victor Stinner
Terry Jan Reedy
Andrew Svetlov
Philip Jenvey
Georg Brandl
Alexander Belopolsky
Florent Xicluna
Nick Coghlan
Antoine Pitrou
Victor Stinner
Brett Cannon
Matthias Klose
Barry Warsaw
Benjamin Peterson
Amaury Forgeot d'Arc
Mark Dickinson
Martin v. Löwis
Guido van Rossum
Jeremy Hylton
Alexandre Vassalotti
Christian Heimes
Neal Norwitz