Temporarily ignore warnings about JIT deactivation when perf support is active.
This will be reverted as soon as a way is found to determine at run time whether the interpreter was built with JIT. Currently, this is not possible on Windows.
Co-authored-by: Kirill Podoprigora <kirill.bast9@mail.ru>
Co-authored-by: Ken Jin <28750310+Fidget-Spinner@users.noreply.github.com>
Co-authored-by: Pablo Galindo <pablogsal@gmail.com>
They used to be shared, before 3.12. Returning to sharing them resolves a failure on Py_TRACE_REFS builds.
Co-authored-by: Petr Viktorin <encukou@gmail.com>
This is essentially a cleanup, moving a handful of API declarations to the header files where they fit best, creating new ones when needed.
We do the following:
* add pycore_debug_offsets.h and move _Py_DebugOffsets, etc. there
* inline struct _getargs_runtime_state and struct _gilstate_runtime_state in _PyRuntimeState
* move struct _reftracer_runtime_state to the existing pycore_object_state.h
* add pycore_audit.h and move to it _Py_AuditHookEntry , _PySys_Audit(), and _PySys_ClearAuditHooks
* add audit.h and cpython/audit.h and move the existing audit-related API there
*move the perfmap/trampoline API from cpython/sysmodule.h to cpython/ceval.h, and remove the now-empty cpython/sysmodule.h
Use per-thread refcounting for the reference from function objects to
their corresponding code object. This can be a source of contention when
frequently creating nested functions. Deferred refcounting alone isn't a
great fit here because these references are on the heap and may be
modified by other libraries.
Instead of surprise crashes and memory corruption, we now hang threads that attempt to re-enter the Python interpreter after Python runtime finalization has started. These are typically daemon threads (our long standing mis-feature) but could also be threads spawned by extension modules that then try to call into Python. This marks the `PyThread_exit_thread` public C API as deprecated as there is no plausible safe way to accomplish that on any supported platform in the face of things like C++ code with finalizers anywhere on a thread's stack. Doing this was the least bad option.
Co-authored-by: Gregory P. Smith <greg@krypto.org>
Currently, we only use per-thread reference counting for heap type objects and
the naming reflects that. We will extend it to a few additional types in an
upcoming change to avoid scaling bottlenecks when creating nested functions.
Rename some of the files and functions in preparation for this change.
We were not properly accounting for interpreter memory leaks at
shutdown and had two sources of leaks:
* Objects that use deferred reference counting and were reachable via
static types outlive the final GC. We now disable deferred reference
counting on all objects if we are calling the GC due to interpreter
shutdown.
* `_PyMem_FreeDelayed` did not properly check for interpreter shutdown
so we had some memory blocks that were enqueued to be freed, but
never actually freed.
* `_PyType_FinalizeIdPool` wasn't called at interpreter shutdown.
This combines and updates our freelist handling to use a consistent
implementation. Objects in the freelist are linked together using the
first word of memory block.
If configured with freelists disabled, these operations are essentially
no-ops.
This change makes things a little less painful for some users. It also fixes a failing assert (gh-120765), by making sure all subinterpreters are destroyed before the main interpreter. As part of that, we make sure Py_Finalize() always runs with the main interpreter active.
In gh-120009 I used an atexit hook to finalize the _datetime module's static types at interpreter shutdown. However, atexit hooks are executed very early in finalization, which is a problem in the few cases where a subclass of one of those static types is still alive until the final GC collection. The static builtin types don't have this probably because they are finalized toward the end, after the final GC collection. To avoid the problem for _datetime, I have applied a similar approach here.
Also, credit goes to @mgorny and @neonene for the new tests.
FYI, I would have liked to take a slightly cleaner approach with managed static types, but wanted to get a smaller fix in first for the sake of backporting. I'll circle back to the cleaner approach with a future change on the main branch.
We already intern and immortalize most string constants. In the
free-threaded build, other constants can be a source of reference count
contention because they are shared by all threads running the same code
objects.
Most module names are interned and immortalized, but the main
module was not. This partially addresses a scaling bottleneck in the
free-threaded when creating closure concurrently in the main module.
The code for Tier 2 is now only compiled when configured
with `--enable-experimental-jit[=yes|interpreter]`.
We drop support for `PYTHON_UOPS` and -`Xuops`,
but you can disable the interpreter or JIT
at runtime by setting `PYTHON_JIT=0`.
You can also build it without enabling it by default
using `--enable-experimental-jit=yes-off`;
enable with `PYTHON_JIT=1`.
On Windows, the `build.bat` script supports
`--experimental-jit`, `--experimental-jit-off`,
`--experimental-interpreter`.
In the C code, `_Py_JIT` is defined as before
when the JIT is enabled; the new variable
`_Py_TIER2` is defined when the JIT *or* the
interpreter is enabled. It is actually a bitmask:
1: JIT; 2: default-off; 4: interpreter.
These are cleanups I've pulled out of gh-118116. Mostly, this change moves code around to align with some future changes and to improve clarity a little. There is one very small change in behavior: we now add the module to the per-interpreter caches after updating the global state, rather than before.
The free-threaded build does not currently support the combination of
single-phase init modules and non-isolated subinterpreters. Ensure that
`check_multi_interp_extensions` is always `True` for subinterpreters in
the free-threaded build so that importing these modules raises an
`ImportError`.
Split `_PyThreadState_DeleteExcept` into two functions:
- `_PyThreadState_RemoveExcept` removes all thread states other than one
passed as an argument. It returns the removed thread states as a
linked list.
- `_PyThreadState_DeleteList` deletes those dead thread states. It may
call destructors, so we want to "start the world" before calling
`_PyThreadState_DeleteList` to avoid potential deadlocks.
Add Py_GetConstant() and Py_GetConstantBorrowed() functions.
In the limited C API version 3.13, getting Py_None, Py_False,
Py_True, Py_Ellipsis and Py_NotImplemented singletons is now
implemented as function calls at the stable ABI level to hide
implementation details. Getting these constants still return borrowed
references.
Add _testlimitedcapi/object.c and test_capi/test_object.py to test
Py_GetConstant() and Py_GetConstantBorrowed() functions.
This changes the free-threaded build to perform a stop-the-world pause
before deleting other thread states when forking and during shutdown.
This fixes some crashes when using multiprocessing and during shutdown
when running with `PYTHON_GIL=0`.
This also changes `PyOS_BeforeFork` to acquire the runtime lock
(i.e., `HEAD_LOCK(&_PyRuntime)`) before forking to ensure that data
protected by the runtime lock (and not just the GIL or stop-the-world)
is in a consistent state before forking.
This adds `_PyMem_FreeDelayed()` and supporting functions. The
`_PyMem_FreeDelayed()` function frees memory with the same allocator as
`PyMem_Free()`, but after some delay to ensure that concurrent lock-free
readers have finished.
This change adds an `eval_breaker` field to `PyThreadState`. The primary
motivation is for performance in free-threaded builds: with thread-local eval
breakers, we can stop a specific thread (e.g., for an async exception) without
interrupting other threads.
The source of truth for the global instrumentation version is stored in the
`instrumentation_version` field in PyInterpreterState. Threads usually read the
version from their local `eval_breaker`, where it continues to be colocated
with the eval breaker bits.
Add an option (--enable-experimental-jit for configure-based builds
or --experimental-jit for PCbuild-based ones) to build an
*experimental* just-in-time compiler, based on copy-and-patch (https://fredrikbk.com/publications/copy-and-patch.pdf).
See Tools/jit/README.md for more information on how to install the required build-time tooling.
For interpreters that share state with the main interpreter, this points
to the same static memory structure. For interpreters with their own
obmalloc state, it is heap allocated. Add free_obmalloc_arenas() which
will free the obmalloc arenas and radix tree structures for interpreters
with their own obmalloc state.
Co-authored-by: Eric Snow <ericsnowcurrently@gmail.com>
mpage
Pablo Galindo Salgado
Eric Snow
Sam Gross
Jeremy Maitin-Shepard
Jelle Zijlstra
Donghee Na
Victor Stinner
Irit Katriel
Guido van Rossum
Malcolm Smith
Michael Droettboom
Brett Simmers
Mark Shannon
Nikita Sobolev
Brandt Bucher
Neil Schemenauer